Insightful Understanding of Synergistic Oxygen Reduction on PtCo3(111) Toward Zinc-Air Batteries.

Theory-guided materials design is an effective strategy for designing catalysts with high intrinsic activity whilst minimizing the usage of expensive metals like platinum. As proof-of-concept, herein it demonstrates that using density functional theory (DFT) calculations and experimental validation that intermetallic PtCo3 alloy nanoparticles offer enhanced electrocatatalytic performance for the oxygen reduction reaction (ORR) compared to Pt nanoparticles. DFT calculations established that PtCo3(111) surfaces possess better intrinsic ORR activity compared to Pt(111) surfaces, owing to the synergistic action of adjacent Pt and Co active sites which optimizes the binding strength of ORR intermediates to boost overall ORR kinetics. With this understanding, a PtCo3/NC catalyst, comprising PtCo3 nanoparticles exposing predominantly (111) facets dispersed on an N-doped carbon support, is successfully fabricated. PtCo3/NC demonstrates a high specific activity (3.4 mA cm-2 mgPt -1), mass activity (0.67 A mgPt -1), and cycling stability for the ORR in 0.1 M KOH, significantly outperforming a commercial 20 wt.% Pt/C catalyst. Moreover, a zinc-air battery (ZAB) assembled with PtCo3/NC as the air-electrode catalyst delivered an open-circuit voltage of 1.47 V, a specific capacity of 775.1 mAh gZn -1 and excellent operation durability after 200 discharge/charge cycles, vastly superior performance to a ZAB built using commercial Pt/C+IrO2 as the air-electrode catalyst.

Dialdehyde cellulose films covalently crosslinked with porphyrin-based covalent organic polymers for photodynamic sterilization.

Foodborne pathogens result in a great harm to human, which is an urgent problem to be addressed. Herein, a novel cellulose-based packaging films with excellent anti-bacterial properties under visible light were prepared. A porphyrin-based covalent organic polymer (Por-COPs) was constructed, then covalently grafted onto dialdehyde cellulose (DAC). The addition of Por-COPs enhanced the mechanical, hydrophobicity, and water resistance of the DAC-based composite films. DAC/Por-COP-2.5 film exhibited outstanding properties for the photodynamic inactivation of bacteria under visible light irradiation, delivering inactivation efficiencies of 99.90 % and 99.45 % towards Staphylococcus aureus and Escherichia coli within 20 min. The DAC/Por-COPs films efficiently generated •O2- and 1O2 under visible light, thereby causing oxidative stress to cell membranes for bacterial inactivation. The prepared composite film forms a protective barrier against bacterial contamination. Results guide the development of high performance and more sustainable packaging films for the food sector.

Deeper Insights into the Morphology Effect of Na2Ti3O7 Nanoarrays on Sodium-Ion Storage.

Na2Ti3O7-based anodes show great promise for Na+ storage in sodium-ion batteries (SIBs), though the effect of Na2Ti3O7 morphology on battery performance remains poorly understood. Herein, hydrothermal syntheses is used to prepare free-standing Na2Ti3O7 nanosheets or Na2Ti3O7 nanotubes on Ti foil substrates, with the structural and electrochemical properties of the resulting electrodes explored in detail. Results show that the Na2Ti3O7 nanosheet electrode (NTO NSs) delivered superior performance in terms of reversible capacity, rate capability, and especially long-term durability in SIBs compared to its nanotube counterpart (NTO NTs). Electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM) investigations, combined with density functional theory calculations, demonstrated that the flexible 2D Na2Ti3O7 nanosheets are mechanically more robust than the rigid Na2Ti3O7 nanotube arrays during prolonged battery cycling, explaining the superior durability of the NTO NSs electrode. This work prompts the use of anodes based on Na2Ti3O7 nanosheets in the future development of high-performance SIBs.

Online sequential analysis of volatile and semivolatile organic compounds in water matrices by double robotic sample preparations and dual-channel mono and comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry system.

The monitoring of organic compounds in aquatic matrices poses challenges due to its complexity and time-intensive nature. To address these challenges, we introduce a novel approach utilizing a dual-channel mono (1D) and comprehensive two-dimensional (2D) gas chromatography coupled with time-of-flight mass spectrometry (GC × GC-TOFMS) system, integrated with a robotic pretreatment platform, for online monitoring of both volatile organic compounds (VOCs) and semivolatile organic compounds (SVOCs) in water matrices. Employing the robotic platform, we establish a suite of online liquid-liquid extraction (LLE) pretreatment processes for water samples, marking the first instance of such procedures. Leveraging the automatic headspace (HS) module, dual robotic preparations of HS and LLE are sequentially executed to extract VOCs and SVOCs from water matrices. The GC × GC-TOFMS system is distinguished by its dual-channel analytical column configuration, facilitating sequential analysis of VOCs in GC-TOFMS mode and SVOCs in GC × GC-TOFMS mode. Quantitative detection of 55 target VOCs and 104 SVOCs is achieved in a water sample using the instrument system. Our method demonstrates excellent correlation coefficients ranging from 0.990 to 1.000, method detection limits ranging from 0.08 to 4.78 µg L-1, relative standard deviations below 19.3 %, and recovery rates ranging from 50.0 % to 124.0 %. To validate the online monitoring capabilities of our system, we assess target SVOCs at three different concentration levels over a 3-day period. Most compounds exhibit recovery rates ranging from 70.0 % to 130.0 %. Furthermore, we apply our method to analyze a real water sample, successfully identifying over 100 target and nontarget VOCs/SVOCs, including alcohols, aldehydes, ketones, acids, esters, and phenols. These results highlight the efficacy of the proposed analysis system, capable of conducting two distinct analyses in automatic sequence, thereby enhancing the efficiency and accuracy of organic compound analysis in water matrices.

Ultrasensitive SERS aptasensor using Au@Ag bimetallic nanorod SERS tags for the selective detection of amantadine in foods.

Herein, a novel surface enhanced Raman spectroscopy (SERS) aptasensor was developed for amantadine (AMD) detection, based on magnetite nanoparticles coated with polyethylenimine, silver nanoclusters and aptamers (Fe3O4@PEI@AgNC-apt) as the capture probe and complementary DNA-modified gold nanorods (AuNRs@4-MPBA@Ag-c-DNA containing 4-mercaptophenylboric acid molecules) as the reporter probe. In the presence of AMD, the AMD and the reporter probe competed for the aptamer on the surface of the capture probe, resulting in the reporter probe detaching from the capture probe leading to a decrease in intensity of the SERS signal at 1067 cm-1 for 4-MPBA. Under optimal conditions, a good linear relationship was established between the SERS intensity at 1067 cm-1 and the logarithm of the AMD concentration over the range 10-6-102 mg L-1, with a LOD of 0.50 × 10-6 mg L-1. The AMD levels in spiked samples were evaluated using the SERS aptasensor, with good recoveries ranging from 90.57% to 113.49% being obtained.

Oxygen Radical Coupling on Short-Range Ordered Ru Atom Arrays Enables Exceptional Activity and Stability for Acidic Water Oxidation.

The discovery of efficient and stable electrocatalysts for oxygen evolution reaction (OER) in acid is vital for the commercialization of the proton-exchange membrane water electrolyzer. In this work, we demonstrate that short-range Ru atom arrays with near-ideal Ru-Ru interatomic distances and a unique Ru-O hybridization state can trigger direct O*-O* radical coupling to form an intermediate O*-O*-Ru configuration during acidic OER without generating OOH* species. Further, the Ru atom arrays suppress the participation of lattice oxygen in the OER and the dissolution of active Ru. Benefiting from these advantages, the as-designed Ru array-Co3O4 electrocatalyst breaks the activity/stability trade-off that plagues RuO2-based electrocatalysts, delivering an excellent OER overpotential of only 160 mV at 10 mA cm-2 in 0.5 M H2SO4 and outstanding durability during 1500 h operation, representing one of the best acid-stable OER electrocatalysts reported to date. 18O-labeled operando spectroscopic measurements together with theoretical investigations revealed that the short-range Ru atom arrays switched on an oxide path mechanism (OPM) during the OER. Our work not only guides the design of improved acidic OER catalysts but also encourages the pursuit of short-range metal atom array-based electrocatalysts for other electrocatalytic reactions.

Z-scheme heterojunction g-C3N4-TiO2 reinforced chitosan/poly(vinyl alcohol) film: Efficient and recyclable for fruit packaging.

Nanoparticles-loaded bio-based polymers have emerged as a sustainable substitute to traditional oil-based packaging materials, addressing the challenges of limited recyclability and significant environmental impact. However, the functionality and efficiency of nanoparticles have a significant impact on the application of bio-based composite films. Herein, graphitic carbon nitride (g-C3N4) and titanium dioxide (TiO2) coupled photocatalyst (g-C3N4-TiO2) was prepared by one-step calcination and introduced into chitosan (CS) and polyvinyl alcohol (PVA) solution to fabricate g-C3N4-TiO2/CS/PVA green renewable composite film via solution casting method. The results demonstrated the successful preparation of a Z-scheme heterojunction g-C3N4-TiO2 with exceptional photocatalytic activity. Furthermore, the incorporation of heterojunction enhanced mechanical properties, water barrier, and ultraviolet (UV) resistance properties of the fresh-keeping film. The g-C3N4-TiO2/CS/PVA composite film exhibited superior photocatalytic antibacterial preservation efficacy on strawberries under LED light, with a prolonged preservation time of up to 120 h, when compared to other films such as polyethylene (PE), CS/PVA, g-C3N4/CS/PVA, and TiO2/CS/PVA. In addition, the composite film has good recyclability and renewability. This work is expected to have great potential for low-cost fruit preservation and sustainable packaging, which also contributes to environmental protection.

Electrochemical oxidation of concentrated benzyl alcohol to high-purity benzaldehyde via superwetting organic-solid-water interfaces.

Organic electrosynthesis in aqueous media is presently hampered by the poor solubility of many organic reactants and thus low purity of liquid products in electrolytes. Using the electrooxidation of benzyl alcohol (BA) as a model reaction, we present a "sandwich-type" organic-solid-water (OSW) system, consisting of BA organic phase, KOH aqueous electrolyte, and porous anodes with Janus-like superwettability. The system allows independent diffusion of BA molecules from the organic phase to electrocatalytic active sites, enabling efficient electrooxidation of high-concentration BA to benzaldehyde (97% Faradaic efficiency at ~180 mA cm-2) with substantially reduced ohmic loss compared to conventional solid-liquid systems. The confined organic-water boundary within the electrode channels suppresses the interdiffusion of molecules and ions into the counterphase, thus preventing the hydration and overoxidation of benzaldehyde during long-term electrocatalysis. As a result, the direct production of high-purity benzaldehyde (91.7%) is achieved in a flow cell, showcasing the effectiveness of electrocatalysis over OSW interfaces for the one-step synthesis of high-purity organic compounds.

PBAT/PLA food packaging film containing sodium dehydroacetate-loaded diatomite as an antibacterial agent: Fabrication, water-gas regulation and long-acting antimicrobial mechanism.

Biodegradable food packaging films with good antimicrobial properties are highly sought after for prolonging the shelf-life of fruits and vegetables whilst minimizing waste streams originating from the food sector. In this work, a series of PBAT/PLA food packaging films containing sodium dehydroacetate-loaded diatomite (SD/D) as an antimicrobial agent were fabricated. Structural analyses showed that the sodium dehydroacetate was incorporated into the pores of the diatomite. A uniform dispersion of SD/D in the composite films effectively enhanced water and gas permeability, whilst also giving the films good mechanical properties. The slow release of SD endowed the composite films with long-acting antibacterial ability (>90 % bacteriostasis rate for E. coli and >85 % bacteriostasis rate for S. aureus). The composite films were able to effectively maintain the quality of banana fruits during storage at room temperature, encouraging their use in food applications where non-biodegradable petrochemical-derived packaging films have traditionally been used.

Engineering the pore environment of antiparallel stacked covalent organic frameworks for capture of iodine pollutants.

Radioiodine capture from nuclear fuel waste and contaminated water sources is of enormous environmental importance, but remains technically challenging. Herein, we demonstrate robust covalent organic frameworks (COFs) with antiparallel stacked structures, excellent radiation resistance, and high binding affinities toward I2, CH3I, and I3- under various conditions. A neutral framework (ACOF-1) achieves a high affinity through the cooperative functions of pyridine-N and hydrazine groups from antiparallel stacking layers, resulting in a high capacity of ~2.16 g/g for I2 and ~0.74 g/g for CH3I at 25 °C under dynamic adsorption conditions. Subsequently, post-synthetic methylation of ACOF-1 converted pyridine-N sites to cationic pyridinium moieties, yielding a cationic framework (namely ACOF-1R) with enhanced capacity for triiodide ion capture from contaminated water. ACOF-1R can rapidly decontaminate iodine polluted groundwater to drinking levels with a high uptake capacity of ~4.46 g/g established through column breakthrough tests. The cooperative functions of specific binding moieties make ACOF-1 and ACOF-1R promising adsorbents for radioiodine pollutants treatment under practical conditions.

Matrix-Free Thermally Activated Delayed Fluorescent Carbon Dots-Based Electroluminescent Light-Emitting Diodes Exceeding 5.6% External Quantum Efficiency.

Carbon dots (CDs) are promising luminescent emission layer materials for next generation electroluminescent light emitting diodes (EL-LEDs) due to their many advantages, such as environmental friendliness, low cost, and high stability. However, limited by the spin-forbidden properties of the triplet transition, it is difficult to improve the external quantum efficiency (EQE) of fluorescent CDs-based EL-LEDs. Meanwhile, traditional thermally activated delayed fluorescent (TADF) CDs prepared using coating strategies are difficult to utilize in EL-LEDs due to the nonconductivity of the coating agent. Herein, we successfully developed matrix-free TADF CDs with yellow emission and achieved a device EQE of 5.68%, which is the highest value reported in CDs-based EL-LEDs. In addition, we also developed white EL-LEDs with an EQE of 1.70%. This study highlights the importance of interactions between precursors in modulating the electroluminescence properties of TADF emitters and provides an effective design principle for matrix-free TADF CDs.

Photocatalytic ethylene production by oxidative dehydrogenation of ethane with dioxygen on ZnO-supported PdZn intermetallic nanoparticles.

The selective oxidative dehydrogenation of ethane (ODHE) is attracting increasing attention as a method for ethylene production. Typically, thermocatalysts operating at high temperatures are needed for C-H activation in ethane. In this study, we describe a low temperature ( < 140 °C) photocatalytic route for ODHE, using O2 as the oxidant. A photocatalyst containing PdZn intermetallic nanoparticles supported on ZnO is prepared, affording an ethylene production rate of 46.4 mmol g-1 h-1 with 92.6% ethylene selectivity under 365 nm irradiation. When we employ a simulated shale gas feed, the photocatalytic ODHE system achieves nearly 20% ethane conversion while maintaining an ethylene selectivity of about 87%. The robust interface between the PdZn intermetallic nanoparticles and ZnO support plays a crucial role in ethane activation through a photo-assisted Mars-van Krevelen mechanism, followed by a rapid lattice oxygen replenishment to complete the reaction cycle. Our findings demonstrate that photocatalytic ODHE is a promising method for alkane-to-alkene conversions under mild conditions.

Synergistic Interfacial Effect of Ru/Co3 O4 Heterojunctions for Boosting Overall Water Splitting.

Low-cost bifunctional electrocatalysts capable of efficiently driving the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are needed for the growth of a green hydrogen economy. Herein, a Ru/Co3 O4 heterojunction catalyst rich in oxygen vacancies (VO ) and supported on carbon cloth (RCO-VO @CC) is prepared via a solid phase reaction (SPR) strategy. A RuO2 /Co9 S8 @CC precursor (ROC@CC) is first prepared by loading Co9 S8 nanosheets onto CC, following the addition of RuO2 nanoparticles (NPs). After the SPR process in an Ar atmosphere, Ru/Co3 O4 heterojunctions with abundant VO are formed on the CC. The compositionally optimized RCO-VO @CC electrocatalyst with a Ru content of 0.55 wt.% exhibits very low overpotential values of 11 and 253 mV at 10 mA cm-2 for HER and OER, respectively, in 1 m KOH. Further, a low cell voltage of only 1.49 V is required to achieve a current density of 10 mA cm-2 . Density functional theoretical calculations verify that the outstanding bifunctional electrocatalytic performance originates from synergistic charge transfer between Ru metal and VO -rich Co3 O4 . This work reports a novel approach toward a high-efficiency HER/OER electrocatalyst for energy storage and conversion.

Development of a capillary electrophoresis method based on magnetic solid-phase extraction for simultaneous and sensitive detection of eight biogenic amines in foods.

BACKGROUND: Biogenic amines (BAs) in high concentrations are toxic and may cause a series of health symptoms. A sensitive measurement of BA levels is essential for human health. Capillary electrophoresis (CE) has emerged for the separation of eight BAs due to simple sample preparation and highly efficient separation. However, an important drawback for CE is low sensitivity. Magnetic solid-phase extraction (MSPE) has become a technique of interest owing to its brief operation and low solvent consumption. Hence, MSPE as a pretreatment has great potential to improve CE sensitivity for the analysis of BAs in complex food. RESULTS: Results showed that the Pt-Co-MWCNTs-COOH possessed strong magnetism, good reusability, and high adsorptive ability toward eight biogenic amines based on the hydrogen bonding between the -COOH of Pt-Co-MWCNTs-COOH and -NH2 groups of BAs. Using it as an adsorbent, a magnetic solid-phase extraction coupled with capillary electrophoresis (MSPE-CE) method was developed to effectively extract and sensitively analyze eight BAs. Under optimal conditions, the MSPE-CE method has wide linearities (10.0-1000.0 µg L-1 ) and low limits of detection (1.0-6.1 µg L-1 ). The accuracy of the developed method yielded recovery values from 82.07% to 102.58%. Meanwhile, the BAs contents in two samples were analyzed using the MSPE-CE method, with the results consistent with those detected by a high-performance liquid chromatography method. CONCLUSION: Given those advantages, the established MSPE-CE method promises the practical guidance of monitoring a variety of BAs and provides a foundation for the detection of other food hazards. © 2023 Society of Chemical Industry.

Epitaxial Ultrathin Pt Atomic Layers on CrN Nanoparticle Catalysts.

The construction of platinum (Pt) atomic layers is an effective strategy to improve the utilization efficiency of Pt atoms in electrocatalysis, thus is important for reducing the capital costs of a wide range of energy storage and conversion devices. However, the substrates used to grow Pt atomic layers are largely limited to noble metals and their alloys, which is not conducive to reducing catalyst costs. Herein, low-cost chromium nitride (CrN) is utilized as a support for the loading of epitaxial ultrathin Pt atomic layers via a simple thermal ammonolysis method. Owing to the strong anchoring and electronic regulation of Pt atomic layers by CrN, the obtained Pt atomic layers catalyst (containing electron-deficient Pt sites) exhibits excellent activity and endurance for the formic acid oxidation reaction, with a mass activity of 5.17 A mgPt -1 that is 13.6 times higher than that of commercial Pt/C catalyst. This novel strategy demonstrates that CrN can replace noble metals as a low-cost substrate for constructing Pt atomic layers catalysts.

Facile Construction of CuFe-Based Metal Phosphides for Synergistic NOx -Reduction to NH3 and Zn-Nitrite Batteries in Electrochemical Cell.

The electrocatalytic nitrite/nitrate reduction reaction (eNO2RR/eNO3RR) offer a promising route for green ammonia production. The development of low cost, highly selective and long-lasting electrocatalysts for eNO2RR/eNO3RR is challenging. Herein, a method is presented for constructing Cu3P-Fe2P heterostructures on iron foam (CuFe-P/IF) that facilitates the effective conversion of NO2 - and NO3 - to NH3. At -0.1 and -0.2 V versus RHE (reversible hydrogen electrode), CuFe-P/IF achieves a Faradaic efficiency (FE) for NH3 production of 98.36% for eNO2RR and 72% for eNO3RR, while also demonstrating considerable stability across numerous cycles. The superior performance of CuFe-P/IF catalyst is due tothe rich Cu3P-Fe2P heterstuctures. Density functional theory calculations have shed light on the distinct roles that Cu3P and Fe2P play at different stages of the eNO2RR/eNO3RR processes. Fe2P is notably active in the early stages, engaging in the capture of NO2 -/NO3 -, O─H formation, and N─OH scission. Conversely, Cu3P becomes more dominant in the subsequent steps, which involve the formation of N─H bonds, elimination of OH* species, and desorption of the final products. Finally, a primary Zn-NO2 - battery is assembled using CuFe-P/IF as the cathode catalyst, which exhibits a power density of 4.34 mW cm-2 and an impressive NH3 FE of 96.59%.

Pore Space Partition Synthetic Strategy in Imine-linked Multivariate Covalent Organic Frameworks.

Partitioning the pores of covalent organic frameworks (COFs) is an attractive strategy for introducing microporosity and achieving new functionality, but it is technically challenging to achieve. Herein, we report a simple strategy for partitioning the micropores/mesopores of multivariate COFs. Our approach relies on the predesign and synthesis of multicomponent COFs through imine condensation reactions with aldehyde groups anchored in the COF pores, followed by inserting additional symmetric building blocks (with C2 or C3 symmetries) as pore partition agents. This approach allowed tetragonal or hexagonal pores to be partitioned into two or three smaller micropores, respectively. The synthesized library of pore-partitioned COFs was then applied for the capture of iodine pollutants (i.e., I2 and CH3I). This rich inventory allowed deep exploration of the relationships between the COF adsorbent composition, pore architecture, and adsorption capacity for I2 and CH3I capture under wide-ranging conditions. Notably, one of our developed pore-partitioned COFs (COF 3-2P) exhibited greatly enhanced dynamic I2 and CH3I adsorption performances compared to its parent COF (COF 3) in breakthrough tests, setting a new benchmark for COF-based adsorbents. Results present an effective design strategy toward functional COFs with tunable pore environments, functions, and properties.

Effects of Fermentation with Tetragenococcus halophilus and Zygosaccharomyces rouxii on the Volatile Profiles of Soybean Protein Hydrolysates.

The effects of fermentation with lactic acid bacteria (LAB) and yeast on the aroma of samples were analyzed in this work. The volatile features of different soybean hydrolysates were investigated using both GC-MS and GC-IMS. Only 47 volatile flavor compounds (VFCs) were detected when using GC-IMS, while a combination of GC-MS and GC-IMS resulted in the identification of 150 compounds. LAB-yeast fermentation could significantly increase the diversity and concentrations of VFCs (p < 0.05), including alcohols, acids, esters, and sulfurs, while reduce the contents of aldehydes and ketones. Hierarchical clustering and orthogonal partial least squares analyses confirmed the impact of fermentation on the VFCs of the hydrolysates. Seven compounds were identified as significant compounds distinguishing the aromas of different groups. The partial least squares regression analysis of the 25 key VFCs (ROAV > 1) and sensory results revealed that the treatment groups positively correlated with aromatic, caramel, sour, overall aroma, and most of the key VFCs. In summary, fermentation effectively reduced the fatty and bean-like flavors of soybean hydrolysates, enhancing the overall flavor quality, with sequential inoculation proving to be more effective than simultaneous inoculation. These findings provided a theoretical basis for improving and assessing the flavor of soybean protein hydrolysates.

Recent advances in the design of afterglow materials: mechanisms, structural regulation strategies and applications.

Afterglow materials are attracting widespread attention owing to their distinctive and long-lived optical emission properties which create exciting opportunities in various fields. Recent research has led to the discovery of many new afterglow materials featuring high photoluminescence quantum yields (PLQY) and lifetimes of up to several hours under ambient conditions. Afterglow materials are typically categorized according to their luminescence mechanism, such as long-persistent luminescence (LPL), room temperature phosphorescence (RTP), or thermally activated delayed fluorescence (TADF). Through rational design and novel synthetic strategies to modulate spin-orbit coupling (SOC) and populate triplet exciton states (T1), luminophores with long lifetimes and bright afterglow characteristics can be realized. Initial research towards afterglow materials focused mainly on pure inorganic materials, many of which possessed inherent disadvantages such as metal toxicity or low energy emissions. In recent years, organic-inorganic hybrid afterglow materials (OIHAMs) have been developed with high PLQY and long lifetimes. These hybrid materials exploit the tunable structure and easy processing of organic molecules, as well as enhanced SOC and intersystem crossing (ISC) processes involving heavy atom dopants, to achieve excellent afterglow performance. In this review, we begin by briefly discussing the structure and composition of inorganic and organic-inorganic hybrid afterglow materials, including strategies for regulating their lifetime, PLQY and luminescence wavelength. The specific advantages of organic-inorganic hybrid afterglow materials, including low manufacturing costs, diverse molecular/electronic structures, tunable structures and optical properties, and compatibility with a variety of substrates, are emphasized. Subsequently, we discuss in detail the fundamental mechanisms used by afterglow materials, their classification, design principles, and end applications (including sensing, anticounterfeiting, and photoelectric devices, among others). Finally, existing challenges and promising future directions are discussed, laying a platform for the design of afterglow materials for specific applications.

The potential of dietary fiber in building immunity against gastrointestinal and respiratory disorders.

The numerous health benefits of dietary fibers (DFs) justify their inclusion in human diets and biomedical products. Given the short- and long-term human impacts of the COVID-19 virus on human health, the potential of DFs in building immunity against gastrointestinal and respiratory disorders is currently receiving high attention. This paper reviews the physicochemical properties of DFs, together with their immune functions and effects on the gastrointestinal tract and respiratory system mainly based on research in the last ten years. Possible modes of action of DFs in promoting health, especially building immunity, are explored. We seek to highlight the importance of understanding the exact physical and chemical characteristics and molecular behaviors of DFs in providing specific immune function. This review provides a perspective beyond the existing recognition of DFs' positive effects on human health, and offers a theoretical framework for the development of special DFs components and their application in functional foods and other therapeutic products against gastrointestinal and respiratory disorders. DFs enhance immunity from gastrointestinal and respiratory diseases to promote host health.