Augmenting insect olfaction performance through nano-neuromodulation.

Biological olfactory systems are highly sensitive and selective, often outperforming engineered chemical sensors in highly complex and dynamic environments. As a result, there is much interest in using biological systems to build sensors. However, approaches to read-out information from biological systems, especially neural signals, tend to be suboptimal due to the number of electrodes that can be used and where these can be placed. Here we aim to overcome this suboptimality in neural information read-out by using a nano-enabled neuromodulation strategy to augment insect olfaction-based chemical sensors. By harnessing the photothermal properties of nanostructures and releasing a select neuromodulator on demand, we show that the odour-evoked response from the interrogated regions of the insect olfactory system can not only be enhanced but can also improve odour identification.

Mortality, Length of Stay, and Cost Implications of Procedural Bleeding After Percutaneous Interventions Using Large-Bore Catheters.

Importance: Bleeding complications after percutaneous transcatheter interventions that used large-bore catheters are frequent and associated with high mortality and morbidity. Objective: To describe the incidence of bleeding complications among patients undergoing contemporary endovascular interventions involving large-bore catheters and its association with in-hospital mortality, length of stay, and health care cost. Design, Setting, and Participants: This retrospective cohort study analyzed all 17 672 patients from the Healthcare Cost and Utilization Project's National Inpatient Sample database who were recorded as having undergone a transcatheter aortic valve replacement (n = 3223), an endovascular aneurysm repair (n = 12 633), or a percutaneous left ventricular assist device implant (n = 1816) between January 1, 2012, and December 31, 2013. Bleeding complication was defined as any transfusion, any hemorrhage or hematoma, or the need for percutaneous or surgical intervention to control the bleeding event. Health care costs were determined by multiplying the total charge for each visit by the cost to charge ratios reported for each hospital code in the database. Data were collected from the database on April 29, 2016. Main Outcomes and Measures: Adjusted association between bleeding complications and mortality was determined by multivariable logistic regression. Length of stay and total health care costs were compared using multivariable linear regression between patients who did and patients who did not have bleeding complications. Results: Bleeding complications occurred in 3128 patients (17.7%) (1984 men and 1144 women, with a mean [SD] age of 75.6 [11.9] years). Bleeding was associated with higher mortality (adjusted odds ratio, 2.70; 95% CI, 2.27-3.22; P < .001) and longer hospital stay (adjusted multiplicative difference, 2.14; 95% CI, 2.06-2.16; P < .001). Median (interquartile range) total health care costs were $48 663 ($32 620-$71 547) for patients with bleeding complications compared with $29 968 ($21 924-$43 287) for patients without a bleeding complication (adjusted multiplicative difference, 1.55; 95% CI, 1.52-1.59; P < .001). Conclusions and Relevance: Periprocedural bleeding was common among patients who underwent transcatheter intervention using large-bore catheters and was associated with a statistically significant increase in mortality, length of stay, and cost.

Bone Tissue Engineering with Multilayered Scaffolds-Part II: Combining Vascularization with Bone Formation in Critical-Sized Bone Defect.

Our previous in vivo study showed that multilayered scaffolds made of an angiogenic layer embedded between an osteogenic layer and an osteoconductive layer, with layer thickness in the 100-400 µm range, resulted in through-the-thickness vascularization of the construct even in the absence of exogenous endothelial cells. The angiogenic layer was a collagen-fibronectin gel, and the osteogenic layer was made from nanofibrous polycaprolactone while the osteoconductive layer was made either from microporous hydroxyapatite or microfibrous polycaprolactone. In this follow-up study, we implanted these acellular and cellular multilayered constructs in critical-sized rat calvarial defects and evaluated their vascularization and bone formation potential. Vascularization and bone formation at the defect were evaluated and quantified using microcomputed tomography (microCT) followed by perfusion of the animals with the radio opaque contrast agent, MICROFIL. The extent of bony bridging and union within the critical-sized defect was evaluated using a previously established scoring system from the microCT data set. Similarly the new bone formation in the defect was quantified from the microCT data set as previously reported. Histological evaluation at 4 and 12 weeks validated the microCT findings. Our experimental results showed that acellular multilayered scaffolds with microscale-thick nanofibers and porous ceramic discs with angiogenic zone at their interface can regenerate functional vasculature and bone similar to that of cellular constructs in critical-sized calvarial defects. This result suggests that suitably bioengineered acellular multilayered constructs can be an improved and more translational approach in functional in vivo bone regeneration.

Biodegradable, phosphate-containing, dual-gelling macromers for cellular delivery in bone tissue engineering.

Injectable, biodegradable, dual-gelling macromer solutions were used to encapsulate mesenchymal stem cells (MSCs) within stable hydrogels when elevated to physiologic temperature. Pendant phosphate groups were incorporated in the N-isopropyl acrylamide-based macromers to improve biointegration and facilitate hydrogel degradation. The MSCs were shown to survive the encapsulation process, and live cells were detected within the hydrogels for up to 28 days in vitro. Cell-laden hydrogels were shown to undergo significant mineralization in osteogenic medium. Cell-laden and acellular hydrogels were implanted into a critical-size rat cranial defect for 4 and 12 weeks. Both cell-laden and acellular hydrogels were shown to degrade in vivo and help to facilitate bone growth into the defect. Improved bone bridging of the defect was seen with the incorporation of cells, as well as with higher phosphate content of the macromer. Furthermore, direct bone-to-hydrogel contact was observed in the majority of implants, which is not commonly seen in this model. The ability of these macromers to deliver stem cells while forming in situ and subsequently degrade while facilitating bone ingrowth into the defect makes this class of macromers a promising material for craniofacial bone tissue engineering.

In vitro and in vivo evaluation of self-mineralization and biocompatibility of injectable, dual-gelling hydrogels for bone tissue engineering.

In this study, we investigated the mineralization capacity and biocompatibility of injectable, dual-gelling hydrogels in a rat cranial defect as a function of hydrogel hydrophobicity from either the copolymerization of a hydrolyzable lactone ring or the hydrogel polymer content. The hydrogel system comprised a poly(N-isopropylacrylamide)-based thermogelling macromer (TGM) and a polyamidoamine crosslinker. The thermogelling macromer was copolymerized with (TGM/DBA) or without (TGM) a dimethyl-γ-butyrolactone acrylate (DBA)-containing lactone ring that modulated the lower critical solution temperature and thus, the hydrogel hydrophobicity, over time. Three hydrogel groups were examined: (1) 15wt.% TGM, (2) 15wt.% TGM/DBA, and (3) 20wt.% TGM/DBA. The hydrogels were implanted within an 8mm critical size rat cranial defect for 4 and 12weeks. Implants were harvested at each timepoint and analyzed for bone formation, hydrogel mineralization and tissue response using microcomputed tomography (microCT). Histology and fibrous capsule scoring showed a light inflammatory response at 4weeks that was mitigated by 12weeks for all groups. MicroCT scoring and bone volume quantification demonstrated a similar bone formation at 4weeks that was significantly increased for the more hydrophobic hydrogel formulations - 15wt.% TGM and 20wt.% TGM/DBA - from 4weeks to 12weeks. A complementary in vitro acellular mineralization study revealed that the hydrogels exhibited calcium binding properties in the presence of serum-containing media, which was modulated by the hydrogel hydrophobicity. The tailored mineralization capacity of these injectable, dual-gelling hydrogels with hydrolysis-dependent hydrophobicity presents an exciting property for their use in bone tissue engineering applications.

Osteochondral tissue regeneration through polymeric delivery of DNA encoding for the SOX trio and RUNX2.

Native osteochondral repair is often inadequate owing to the inherent properties of the tissue, and current clinical repair strategies can result in healing with a limited lifespan and donor site morbidity. This work investigates the use of polymeric gene therapy to address this problem by delivering DNA encoding for transcription factors complexed with the branched poly(ethylenimine)-hyaluronic acid (bPEI-HA) delivery vector via a porous oligo[poly(ethylene glycol) fumarate] hydrogel scaffold. To evaluate the potential of this approach, a bilayered scaffold mimicking native osteochondral tissue organization was loaded with DNA/bPEI-HA complexes. Next, bilayered implants either unloaded or loaded in a spatial fashion with bPEI-HA and DNA encoding for either Runt-related transcription factor 2 (RUNX2) or SRY (sex determining region Y)-box 5, 6, and 9 (the SOX trio), to generate bone and cartilage tissues respectively, were fabricated and implanted in a rat osteochondral defect. At 6weeks post-implantation, micro-computed tomography analysis and histological scoring were performed on the explants to evaluate the quality and quantity of tissue repair in each group. The incorporation of DNA encoding for RUNX2 in the bone layer of these scaffolds significantly increased bone growth. Additionally, a spatially loaded combination of RUNX2 and SOX trio DNA loading significantly improved healing relative to empty hydrogels or either factor alone. Finally, the results of this study suggest that subchondral bone formation is necessary for correct cartilage healing.

Synthesis and characterization of injectable, biodegradable, phosphate-containing, chemically cross-linkable, thermoresponsive macromers for bone tissue engineering.

Novel, injectable, biodegradable macromer solutions that form hydrogels when elevated to physiologic temperature via a dual chemical and thermo-gelation were fabricated and characterized. A thermogelling, poly(N-isopropylacrylamide)-based macromer with pendant phosphate groups was synthesized and subsequently functionalized with chemically cross-linkable methacrylate groups via degradable phosphate ester bonds, yielding a dual-gelling macromer. These dual-gelling macromers were tuned to have transition temperatures between room temperature and physiologic temperature, allowing them to undergo instantaneous thermogelation as well as chemical gelation when elevated to physiologic temperature. Additionally, the chemical cross-linking of the hydrogels was shown to mitigate hydrogel syneresis, which commonly occurs when thermogelling materials are raised above their transition temperature. Finally, degradation of the phosphate ester bonds of the cross-linked hydrogels yielded macromers that were soluble at physiologic temperature. Further characterization of the hydrogels demonstrated minimal cytotoxicity of hydrogel leachables as well as in vitro calcification, making these novel, injectable macromers promising materials for use in bone tissue engineering.

Phosphorous-containing polymers for regenerative medicine.

Disease and injury have resulted in a large, unmet need for functional tissue replacements. Polymeric scaffolds can be used to deliver cells and bioactive signals to address this need for regenerating damaged tissue. Phosphorous-containing polymers have been implemented to improve and accelerate the formation of native tissue both by mimicking the native role of phosphorous groups in the body and by attachment of other bioactive molecules. This manuscript reviews the synthesis, properties, and performance of phosphorous-containing polymers that can be useful in regenerative medicine applications.

Evaluation of antibiotic releasing porous polymethylmethacrylate space maintainers in an infected composite tissue defect model.

This study evaluated the in vitro and in vivo performance of antibiotic-releasing porous polymethylmethacrylate (PMMA)-based space maintainers comprising a gelatin hydrogel porogen and a poly(dl-lactic-co-glycolic acid) (PLGA) particulate carrier for antibiotic delivery. Colistin was released in vitro from either gelatin or PLGA microparticle loaded PMMA constructs, with gelatin-loaded constructs releasing colistin over approximately 7 days and PLGA microparticle-loaded constructs releasing colistin for up to 8 weeks. Three formulations with either burst release or extended release at different doses were tested in a rabbit mandibular defect inoculated with Acinetobacter baumannii (2×10(7) colony forming units ml(-1)). In addition, one material control that released antibiotic but was not inoculated with A. baumannii was tested. A. baumannii was not detectable in any animal after 12 weeks on culture of the defect, saliva, or blood. Defects with high dose extended release implants had greater soft tissue healing compared with defects with burst release implants, with 8 of 10 animals showing healed mucosae compared with 2 of 10 respectively. Extended release of locally delivered colistin via a PLGA microparticle carrier improved soft tissue healing compared with implants with burst release of colistin from a gelatin carrier.

Building bridges: leveraging interdisciplinary collaborations in the development of biomaterials to meet clinical needs.

Our laboratory at Rice University has forged numerous collaborations with clinicians and basic scientists over the years to advance the development of novel biomaterials and the modification of existing materials to meet clinical needs. This review highlights collaborative advances in biomaterials research from our laboratory in the areas of scaffold development, drug delivery, and gene therapy, especially as related to applications in bone and cartilage tissue engineering.

Thermoresponsive, in situ cross-linkable hydrogels based on N-isopropylacrylamide: fabrication, characterization and mesenchymal stem cell encapsulation.

Hydrogels that solidify in response to a dual, physical and chemical, mechanism upon temperature increase were fabricated and characterized. The hydrogels were based on N-isopropylacrylamide, which renders them thermoresponsive, and contained covalently cross-linkable moieties in the macromers. The effects of the macromer end group, acrylate or methacrylate, and the fabrication conditions on the degradative and swelling properties of the hydrogels were investigated. The hydrogels exhibited higher swelling below their lower critical solution temperature (LCST). When immersed in cell culture medium at physiological temperature, which was above their LCST, hydrogels showed constant swelling and no degradation over 8 weeks, with the methacrylated hydrogels showing greater swelling than their acrylated analogs. In addition, hydrogels immersed in cell culture medium under the same conditions showed lower swelling compared with phosphate-buffered saline. The interplay between chemical cross-linking and thermally induced phase separation affected the swelling characteristics of the hydrogels in different media. Mesenchymal stem cells encapsulated in the hydrogels in vitro were viable over 3 weeks and markers of osteogenic differentiation were detected when the cells were cultured with osteogenic supplements. Hydrogel mineralization in the absence of cells was observed in cell culture medium with the addition of fetal bovine serum and ß-glycerol phosphate. The results suggest that these hydrogels may be suitable as carriers for cell delivery in tissue engineering.