Detection of phosphopeptides using Fe(III)-nitrilotriacetate complexes immobilized on a MALDI plate.

Metal affinity complexes were chemically grafted onto the surface of gold matrix-assisted laser desorption/ionization (MALDI) plates by coupling a derivative of nitrilotriacetate (NTA) to immobilized poly(acrylic acid) (PAA) and subsequently forming the Fe(III)-NTA complex. The immobilized complexes can adsorb phosphorylated peptides preferentially from protein digests; deposition of digests on these surface-modified plates, followed by rinsing with an acetic acid solution, addition of matrix, and subsequent analysis by MALDI MS, resulted in mass spectra dominated by peaks corresponding to phosphopeptides. In the case of analyzing a tryptic digest of beta-casein, conventional MALDI MS revealed only one monophosphopeptide, while use of the Fe(III)-NTA-PAA-modified plate resulted in strong signals due to two additional tetraphosphorylated species. The diminution or elimination of signals due to nonphosphorylated species also greatly simplified the identification of phosphopeptides during analysis of ovalbumin digests and myoglobin digests spiked with an equimolar mixture of angiotensin and phosphoangiotensin. The matrix 2',4',6'-trihydroxyacetophenone mixed with diammonium hydrogen citrate proved to be much better than alpha-cyano-4-hydroxycinnamic acid for the detection of phosphorylated peptides from digests of beta-casein and ovalbumin.

Study of primary amines for nucleophilic cleavage of cyanylated cystinyl proteins in disulfide mass mapping methodology.

In a study of primary (methyl to butyl) amines as nucleophiles for cyano-induced cleavage of cysteinyl proteins, methylamine was found to be superior to ammonia for cyanylation (CN)-based disulfide mass mapping methodology. Reaction conditions such as nucleophile concentration, temperature, and reaction time were systematically studied using ribonuclease A as a model protein. The CN-induced cleavage products were monitored using reverse-phase chromatography and matrix-assisted laser desorption ionization mass spectrometry. Results showed that low temperature, short reaction time, and high nucleophile concentration optimize the cleavage reaction and minimize side reactions. These conditions shorten the analysis time and substantially improve the yield of cleavage products. Further, the concurrent use of homologous nucleophiles (e.g., ammonia and methylamine) facilitates recognition and identification of cleavage products.

Characterization of peptide folding nuclei by hydrogen/deuterium exchange-mass spectrometry.

Covalently linked pairs of well-chosen peptides can be good model systems for protein folding studies because they can adopt stable secondary, side-chain, and tertiary structure under certain conditions. We demonstrate a method for characterizing the structure in such peptide pairs by hydrogen/deuterium exchange of individual amide groups analyzed by collision-induced dissociation tandem mass spectrometry, in concert with circular dichroism spectroscopy. We apply the method to two peptides (and their three possible pairs) from bovine pancreatic trypsin inhibitor to address specific hypotheses regarding the stabilization of local secondary structure by long-range interactions.

'Signature sets', minimal fragment sets for identifying protein disulfide structures with cyanylation-based mass mapping methodology.

Our cyanylation (CN)-based methodology for determining disulfide structure of cystinyl proteins overcomes the limitations of conventional proteolytic methods. However, the CN-based method has the potential drawback that occasionally some CN-induced cleavage fragments may not be detected. We show that CN-based methods can overcome the failure to detect fragments by demonstrating the existence of small 'signature sets' of fragments. The link between signature sets and the robustness of CN-based methodology is validated by two case studies.

Integration of hydrogen/deuterium exchange and cyanylation-based methodology for conformational studies of cystinyl proteins.

This report documents the feasibility and advantages of integrating hydrogen/deuterium exchange (HDX) methodology with cyanylation (CN)-based methodology to determine the conformation of cystinyl proteins and intermediates during refolding. The CN-based methodology can be used to trap, identify, and preserve the disulfide structure of a given cystinyl protein folding intermediate, while the HDX methodology can be used to assess other conformational features of the intermediate. Specifically, in this study, CN-based methodology was used to trap a 1-disulfide bond and a 2-disulfide intermediate of long Arg(3) insulin-like growth factor-I (LR(3)IGF-I), which was then exposed to HDX using D(2)O at pD 6.8 and subsequently digested with pepsin before analysis by matrix-assisted laser desorption/ionization mass spectrometry. The HDX results show an increasing degree of secondary and tertiary structure as a function of disulfide bond formation. In addition, the HDX results for two overlapping peptic fragments suggest that a segment of the polypeptide exists in two conformations, which can be distinguished by HDX and pepsin. These results from HDX mass spectrometry are in reasonably good agreement with those from nuclear magnetic resonance studies of native LR(3)IGF-I and IGF-I, in which approximately 5000 times more material was used than in our study. Indications are that the integrated use of HDX and CN-based methodologies will be effective in studying the refolding of cystinyl proteins at the subnanomole level.

Use of polymer-modified MALDI-MS probes to improve analyses of protein digests and DNA.

The use of sample probe surfaces patterned with 200-microm-diameter spots of hydrophilic, charged polymers significantly enhances the analysis of protein digests and DNA by MALDI-MS. Selective adsorption on these polymer-modified surfaces allows collection of specific proteolytic peptides, while subsequent rinsing of the deposited sample removes contaminants. In the case of partially digested myoglobin, the mass spectrum obtained using a sample probe modified with polyanionic functionalities permits detection of 22 proteolytic fragments, while analysis using a stainless steel MALDI sample probe gives only 11 detectable fragments. Similarly, during the analysis of bovine serum albumin digests, the use of several different surface-modified MALDI sample probes increases sequence coverage from 61.3 to 74.5%. Detection of phosphorylated peptides can be quite challenging during analyses of phosphoprotein digests by MALDI-MS because these anionic proteolytic fragments have low ionization efficiencies. However, MALDI signals from the phosphorylated proteolytic fragments sometimes increase dramatically when using a sample probe surface modified by a polycation (polyethylenimine or poly(acrylic acid) complexed with Fe(3+)). The signal enhancement apparently occurs because the positive surface selectively binds the phosphorylated peptides. The use of patterned, polycationic surfaces also shows great promise for selective adsorption and decontamination of DNA samples; a simple water rinse diminishes or eliminates the formation of multi-ion adducts, thereby improving mass resolution during subsequent analysis by MALDI-MS.

Mass Spectrometric Evidence for an Alternate Disulfide Bond in Chloroplast Fructose Bisphosphatase.

Mass mapping analysis based on cyanylation (CN) of the protein and CN-induced cleavage indicates that all three cysteine residues in the insertion into the light-activated pea leaf chloroplast fructose bisphosphatase (E.C. 3.1.3.11) are able to participate in disulfide bond formation. There is a major peak in the mass spectrum of the cleavage products indicating that Cys173 forms a disulfide bond with Cys153, consistent with the structure of the oxidized enzyme in PDB files 1d9q and 1dcu, and a minor peak indicating that Cys173 forms an alternate disulfide bond with Cys178. The Cys173-Cys178 disulfide bond was not apparent in the available crystal structures.

Non-specific, on-probe cleanup methods for MALDI-MS samples.

High concentrations of contaminants such as salts and surfactants are often present in biological samples to solubilize or stabilize analytes such as proteins. Unfortunately, the presence of those contaminants often precludes direct analysis by MALDI-MS. Selective adsorption of analytes directly on modified MALDI probes, followed by rinsing to remove contaminants, overcomes this problem. This review focuses on various modifications of MALDI probes to allow the adsorption of proteins and DNA, even in a large excess of salt or surfactant. Interfaces deposited on the MALDI probes to adsorb analytes include films of commercial polymers, thin layers of matrix crystals, self-assembled monolayers, and ultrathin polymer films. Hydrophobic and ionic interactions both effect analyte adsorption on those interfaces, and patterned interfaces allow the concentration and purification of analyte molecules.

Automated data interpretation based on the concept of "negative signature mass" for mass-mapping disulfide structures of cystinyl proteins.

An efficient method for data processing and interpretation is needed to support and extend disulfide mass-mapping methodology based on partial reduction and cyanylation-induced cleavage to proteins containing more than four cystines. Here, the concept of "negative signature mass" is introduced as the novel feature of an algorithm designed to identify the disulfide structure of a cystinyl protein given an input of mass spectral data and an amino acid sequence. The "negative signature mass" process is different from the conventional approach in that it does not directly rule-in disulfide linkages, but rather eliminates linkages from a list of all possible theoretical linkages, with the goal of ruling out enough linkages so that only one disulfide structure can be constructed. The operating principles and the effectiveness of the algorithm are described in the context of analyzing ribonuclease A, a 124-residue protein containing eight cysteines in the form of four cystines (disulfides).

Recognition of cysteine-containing peptides through prompt fragmentation of the 4-dimethylaminophenylazophenyl-4'-maleimide derivative during analysis by MALDI-MS.

Under specified UV-MALDI conditions, the 4-dimethylaminophenylazophenyl-4'-maleimide (DABMI) derivative of cysteine-containing peptides undergoes prompt fragmentation to produce a characteristic mass spectral pattern. As reported previously by others, derivatization with chromophoric DABMI allows cysteine-containing peptides and proteins to be tracked during HPLC by absorbance at upper UV and visible wavelengths. Here, we describe methodology by which these same peptide derivatives can be recognized by their distinctive MALDI mass spectral fragmentation pattern, then mass mapped, allowing for easy, rapid identification of cysteine-containing peptides.

Mass mapping sites of nitration in tyrosine hydroxylase: random vs selective nitration of three tyrosine residues.

Previous work has shown that tyrosine residues Y423, Y428, and Y432 are potential targets for nitration when tyrosine hydroxylase is exposed to peroxynitrite. For any given protein molecule, up to three nitration events involving these residues may occur. In an effort to determine whether this nitration is directed toward a particular tyrosine residue or randomly distributed among all three tyrosine residues, the goal of this study was to determine whether a singly nitrated molecule was always nitrated at a particular tyrosine residue or whether the initial nitration event was randomly distributed among all three tyrosine residues. Isolation of the singly nitrated peptide V410-E436, followed by subsequent cleavage at D425 and analysis of the resulting peptide fragments by matrix-assisted laser desorption ionization mass spectrometry and LC/MS/MS revealed that the first nitration event was randomly distributed among Y423, Y428, and Y432.

Patterned monolayer/polymer films for analysis of dilute or salt-contaminated protein samples by MALDI-MS.

This paper describes a surface science/mass spectrometry effort to develop and characterize a patterned gold surface that serves as a MALDI sample platform capable of concentrating and purifying proteins. Using microcontact printing, small (200-microm diameter) hydrophilic spots of bare gold or chemically anchored poly(acrylic acid) (PAA) are patterned at 5-mm intervals in a hydrophobic field consisting of a self-assembled monolayer of hexadecanethiol. Building on recent innovations by others, the small hydrophilic spots concentrate the sample to achieve good reproducibility and high sensitivity in the MALDI signal. One of the key features in this work is the combination of the high density of carboxylate groups in PAA with a small spot size to afford both concentration and purification of proteins via ionic interactions. This translates into detection limits for salt-contaminated proteins that are 20-100 times lower (low femtomole) than those reported for previous polymer- or monolayer-modified MALDI probes (using proteins in the 3-15-kDa range). Reflectance FT-IR spectroscopy and ellipsometry were used to determine the amount of protein adsorbed to a PAA-modified sample plate as a function of pH and salt concentration. Amide absorbances in IR spectra correlate well with MALDI-MS signals measured after addition of 2,5-dihydroxybenzoic acid as a matrix.

Dopamine biosynthesis is regulated by S-glutathionylation. Potential mechanism of tyrosine hydroxylast inhibition during oxidative stress.

Tyrosine hydroxylase (TH), the initial and rate-limiting enzyme in the biosynthesis of the neurotransmitter dopamine, is inhibited by the sulfhydryl oxidant diamide in a concentration-dependent manner. The inhibitory effect of diamide on TH catalytic activity is enhanced significantly by GSH. Treatment of TH with diamide in the presence of [(35)S]GSH results in the incorporation of (35)S into the enzyme. The effect of diamide-GSH on TH activity is prevented by dithiothreitol (DTT), as is the binding of [(35)S]GSH, indicating the formation of a disulfide linkage between GSH and TH protein cysteinyls. Loss of TH catalytic activity caused by diamide-GSH is partially recovered by DTT and glutaredoxin, whereas the disulfide linkage of GSH with TH is completely reversed by both. Treatment of intact PC12 cells with diamide results in a concentration-dependent inhibition of TH activity. Incubation of cells with [(35)S]cysteine, to label cellular GSH prior to diamide treatment, followed by immunoprecipitation of TH shows that the loss of TH catalytic activity is associated with a DTT-reversible incorporation of [(35)S]GSH into the enzyme. A combination of matrix-assisted laser desorption/ionization/mass spectrometry and liquid chromatography/tandem mass spectrometry was used to identify the sites of S-glutathionylation in TH. Six cysteines (177, 249, 263, 329, 330, and 380) of the seven cysteine residues in TH were confirmed as substrates for modification. Only Cys-311 was not S-glutathionylated. These results establish that TH activity is influenced in a reversible manner by S-glutathionylation and suggest that cellular GSH may regulate dopamine biosynthesis under conditions of oxidative stress or drug-induced toxicity.

Peroxynitrite-induced nitration of tyrosine hydroxylase: identification of tyrosines 423, 428, and 432 as sites of modification by matrix-assisted laser desorption ionization time-of-flight mass spectrometry and tyrosine-scanning mutagenesis.

Tyrosine hydroxylase (TH), the initial and rate-limiting enzyme in the biosynthesis of the neurotransmitter dopamine, is inactivated by peroxynitrite. The sites of peroxynitrite-induced tyrosine nitration in TH have been identified by matrix-assisted laser desorption time-of-flight mass spectrometry and tyrosine-scanning mutagenesis. V8 proteolytic fragments of nitrated TH were analyzed by matrix-assisted laser desorption time-of-flight mass spectrometry. A peptide of 3135.4 daltons, corresponding to residues V410-E436 of TH, showed peroxynitrite-induced mass shifts of +45, +90, and +135 daltons, reflecting nitration of one, two, or three tyrosines, respectively. These modifications were not evident in untreated TH. The tyrosine residues (positions 423, 428, and 432) within this peptide were mutated to phenylalanine to confirm the site(s) of nitration and assess the effects of mutation on TH activity. Single mutants expressed wild-type levels of TH catalytic activity and were inactivated by peroxynitrite while showing reduced (30-60%) levels of nitration. The double mutants Y423F,Y428F, Y423F,Y432F, and Y428F,Y432F showed trace amounts of tyrosine nitration (7-30% of control) after exposure to peroxynitrite, and the triple mutant Y423F,Y428F,Y432F was not a substrate for nitration, yet peroxynitrite significantly reduced the activity of each. When all tyrosine mutants were probed with PEO-maleimide activated biotin, a thiol-reactive reagent that specifically labels reduced cysteine residues in proteins, it was evident that peroxynitrite resulted in cysteine oxidation. These studies identify residues Tyr(423), Tyr(428), and Tyr(432) as the sites of peroxynitrite-induced nitration in TH. No single tyrosine residue appears to be critical for TH catalytic function, and tyrosine nitration is neither necessary nor sufficient for peroxynitrite-induced inactivation. The loss of TH catalytic activity caused by peroxynitrite is associated instead with oxidation of cysteine residues.