Er-Doped BiVO4/BiFeO3 Nanocomposites Synthesized via Sonochemical Process and Their Piezo-Photocatalytic Application.

In this work, Er-doped BiVO4/BiFeO3 composites are prepared using the sonochemical process with a difference of rare earth loading compositions. The crystallinity and chemical and morphological structure of as-synthesized samples were investigated via X-ray diffraction, Raman scattering, and electron microscopy, respectively. The diffuse reflectance technique was used to extract the optical property and calculate the optical band gap of the composite sample. The piezo-photocatalytic performance was evaluated according to the decomposition of a Rhodamine B organic compound. The decomposition of the organic compound was achieved under ultrasonic bath irradiation combined with light exposure. The Er-doped BiVO4/BiFeO3 composite heterojunction material exhibited significant enhancement of the piezo-photocatalytic activity under both ultrasonic and light irradiation due to the improvement in charge generation and separation. The result indicates that Er dopant strongly affects the phase transformation, change in morphology, and alternation in optical band gap of the BiVO4 matrix. The incorporation of BiFeO3 in the composite form with BiVO4 doped with 1%Er can improve the photocatalytic performance of BiVO4 via piezo-induced charge separation and charge recombination retardment.

Influence of low-cost Thai leucoxene minerals on the growth, bioactive compounds, and antibacterial activities of Chrysanthemum indium L. cuttings in in vitro culture.

The effects of low-cost Thai leucoxene mineral (LM) at different concentrations (10, 20, 30, 40, 50, and 60 mg/L) on the growth and antibacterial properties of Chrysanthemum indium L. cuttings under in vitro were evaluated. The primary chemical composition of LM was approximately 86% titanium dioxide (TiO2), as determined by dispersive X-ray spectroscopy. The crystalline structure, shape, and size were investigated by X-ray diffraction and scanning electron microscopy. LM at 40 and 50 mg/L significantly increased plant height, leaf number, node number, and fresh and dry weight. These growth-promoting properties were accompanied by improved chlorophyll and carotenoid contents and antioxidant enzyme activities and reduced malondialdehyde levels. Additionally, LM treatment at 40 and 50 mg/L had positive effects on antibacterial activity, as indicated by the lowest minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) values. The high levels of phenolic compounds in the plants contributed to the MIC and MBC values. In conclusion, these findings provide evidence for the effectiveness of LM in enhancing the growth of Chrysanthemum plants in in vitro culture and improving their antibacterial abilities.

Impact of pretreatment with dielectric barrier discharge plasma on the drying characteristics and bioactive compounds of jackfruit slices.

BACKGROUND: Hot-air drying is a popular method for preserving the production of jackfruit, but heat treatment damages its nutritional qualities. Cold plasma is one of the pretreatment methods used to preserve quality attributes of fruits before drying. In the present work, we studied the effect of dielectric barrier discharge (DBD) plasma on the drying characteristics, microstructure, and bioactive compounds of jackfruit slices with different pretreatment times (15, 30, 45, and 60 s), followed by hot-air drying at 50, 60, and 70 °C. A homemade DBD device was operated via three neon transformers. RESULTS: Optical emission spectrophotometry revealed the emitted spectra of the reactive species in DBD plasma, including the N2 second positive system, N2 first negative system, nitrogen ion, and hydroxyl radical. The results showed that the DBD plasma promoted moisture transfer and enhanced the drying rate, related to the changes in the surface microstructure of samples damaged by DBD plasma. The modified Overhults model was recommended for describing the drying characteristics of jackfruit slices. The contents of ascorbic acid, total phenolics, total flavonoids, total polysaccharides, and antioxidant activity in pretreated jackfruit slices were improved by 9.64%, 42.59%, 25.77%, 27.00%, and 23.13%, respectively. However, the levels of color and carotenoids were reduced. CONCLUSION: Thus, the bioactive compounds in dried jackfruit slices can be improved using the DBD plasma technique as a potential pretreatment method for the drying process. © 2023 Society of Chemical Industry.

Effect of Metal (Mn, Co, Zn, Ni) Doping on Structural, Optical and Photocatalytic Properties of TiO2 Nanoparticles Prepared by Sonochemical Method.

Metal-doped TiO2 nanoparticles (Metal = Mn, Co, Zn, Ni) were synthesized by sonochemical method accompanying post calcination process using metallic nitrates of manganese, cobalt, zinc, nickel with various metal contents from 0-5 mol% and titanium isopropoxide as a starting precursors. Sodium hydroxide (NaOH) base was used as a precipitating agent. The influence of ultrasound operated at 750 W 20 kHz on the crystalline structure of metal-doped TiO2 nanoparticles has been characterized by X-ray diffraction (XRD) while morphologies and grain size of the nanoparticles were monitored by field emission scanning electron microscope (FE-SEM). The optical absorptivities and corresponding band gaps were evaluated by diffuse reflectance spectroscopy (DRS). The performance of photocatalytic activities of metal-doped TiO2 nanoparticles against aqueous organic dye Rhodamine B (RhB) under visible light was investigated. The results reveal that their crystallinity of synthesized metal doped TiO2 nanoparticles is in mixed phase between anatase, rutile and brookite with calcination temperature at 500 °C for 3 h and their crystalline of all samples are shown. The incorporation of metal dopant on the photocatalytic performance of TiO2 exhibits a significant enhancement in its photocatalytic activities under visible light due to the decrease in band gap energy of metal doped TiO2 nanoparticles.

Sonochemical Synthesis, Characterization, and Photocatalytic Activity of Perovskite ZnTiO3 Nanopowders.

Perovskite zinc titanate (ZnTiO3) nanopowders were synthesized using the sonochemical method combined with calcinations at 500 °C and 900 °C for 2 h to improve their crystallinity. The effect of calcination temperature on their structural, optical, and photocatalytic properties has been studied. The cubic phase and the mixing phase of cubic and hexagonal were observed in sample calcined at 600 °C and 700 °C, respectively, while the spinel ZnTiO3 and rutile TiO2 phase arises in sample calcined over 700 °C. The valence state was investigated by the X-ray absorption near-edge spectroscopy technique, and the corresponding results indicate the existence of Zn2+ and Ti4+ in the powders. The chemical states of the samples were scrutinized by X-ray photoelectron spectroscopy. The average particle size is approximately 20-240 nm. The excellent photocatalytic performance of ZnTiO3 nanoparticle calcined at 700 °C gave complete degradation Rhodamine B (RhB) in 75 min under ultraviolet light exposure with the k rate of 0.033 min -1 and 55% of decolorization RhB in 210 min under visible irradiation. The sample calcined at 700 °C ensures a good dielectric permittivity with a value 20 and the loss tangent of about 10-2 .