ABSTRACT
European market regulates that poultry electronarcosis stunning in abattoirs must be performed with a minimal required current (mA per animal) and correlative frequency (Hz), to promote animal welfare and meat quality. In this way, Brazilian abattoirs must adjust the stunning parameters so that they can meet the requirements of that market. This study evaluated the effect of stunning parameters using frequency and duty cycle variables. For this, nine treatments were performed, whose results showed that the analyzed frequencies (700, 1100, and 1500 Hz) had a higher incidence of indicators of animal welfare (AW). Thus, stunning had low efficiency in AW terms. However, the 25% and 40% duty cycles had the best stunning efficiency. There was no significant difference (P > 0.05) for pH 24 h, bruises, and drip loss. Color and pH 2 h were significantly affected (P < 0.05). The shear force was higher in birds subjected to higher frequencies and interaction between 1500 Hz and 15% and 25% duty cycles. Water-holding capacity was lower at 1100 Hz and in the 25% duty cycle interactions. The treatments affected the evaluated indicators, except for the 40% duty cycle, which had a positive influence. Therefore, the duty cycle applicability must be elucidated due to its direct influence on stunning efficiency.
O mercado europeu regulamenta que a insensibilização de aves por eletronarcose nos abatedouros deva acontecer com uma corrente mínima necessária (mA por animal) e frequência correlata (Hz), com corrente e frequência alta. O intuito é promover o bem estar animal e qualidade de carne. Desta forma, os abatedouros brasileiros devem ajustar os parâmetros de insensibilização para que possam atender este mercado. O objetivo do trabalho foi avaliar o efeito dos parâmetros de insensibilização usando as variáveis frequência e duty cycle. Foram realizados nove ensaios. Os resultados demostraram que as frequências avaliadas (700 Hz, 1100 Hz e 1500 Hz) apresentaram maior incidência nos indicadores de Bem Estar Animal (BEA). Assim, houve baixa eficiência na insensibilização das aves para este fator. Entretanto, o duty cycle 25% e 40% promoveu a melhor eficiência na insensibilização das aves. Não foi observada diferença significativa (P > 0,05) para pH 24h, hematomas e a perda por gotejamento. A cor e o pH 2h foram afetados significativamente (P < 0,05) nos ensaios avaliados. A força de cisalhamento foi maior nas frequências mais altas e na interação da frequência de 1500 Hz com o duty cycle de 15% e 25% A capacidade de retenção de água foi menor na frequência de 1100 Hz, e na interação duty cycle 25%. Os ensaios estudados apresentaram comprometimento dos indicadores avaliados, exceto a variável duty cycle a 40%, que demonstrou influência positiva nos indicadores avaliados. Portanto, a aplicabilidade do duty cycle deve ser elucidada devido a sua influência direta na eficiência da insensibilização.
Subject(s)
Animals , Poultry , Animal Welfare , Abattoirs , Electronarcosis/veterinaryABSTRACT
Sodium reduction and the substitution of sodium chloride by other salts have been extensively studied in order to produce healthier foods. Coppa is a pork cured product that receives high levels of sodium through the salting process. The objective of this work was to evaluate the impact of reductions in Sodium Chloride (NaCl), substitution by Potassium Chloride (KCl) and reductions in the re-salting time on the physicochemical, microbiological and sensorial characteristics in pork coppa. Four treatments were applied: T1 with 2 days of salting, 2 days of re-salting and 35 % reduction of NaCl; T2 with 2 days of salting and 3 days of re-salting and 35 % reduction of NaCl; T3 with 2 days of salting and 2 days of re-salting and replacing 35 % of NaCl by KCl; T4 with 2 days of salting and 3 days of re-salting and 35 % replacing NaCl by KCl. Control: standard treatment was applied with 100 % of NaCL and salting time was 2 days and then 5 days to re-salting. The reduction in sodium content in processed pork Coppa produced no microbiological nor physicochemical changes. The reduction in salting together with salting and re-salting time and the partial replacement of NaCl by KCl resulted in reductions from 2,000 mg to 1,600 mg of sodium. Sensory evaluation demonstrated that the reduction in re-salting time was efficient using the ideal profile method which showed that treatments T1 and T2 were efficient in creating a product that meets consumer expectations.(AU)
Subject(s)
Animals , Red Meat/analysis , Red Meat/microbiology , Swine , Potassium Chloride/administration & dosage , Sodium Chloride/administration & dosageABSTRACT
Sodium reduction and the substitution of sodium chloride by other salts have been extensively studied in order to produce healthier foods. Coppa is a pork cured product that receives high levels of sodium through the salting process. The objective of this work was to evaluate the impact of reductions in Sodium Chloride (NaCl), substitution by Potassium Chloride (KCl) and reductions in the re-salting time on the physicochemical, microbiological and sensorial characteristics in pork coppa. Four treatments were applied: T1 with 2 days of salting, 2 days of re-salting and 35 % reduction of NaCl; T2 with 2 days of salting and 3 days of re-salting and 35 % reduction of NaCl; T3 with 2 days of salting and 2 days of re-salting and replacing 35 % of NaCl by KCl; T4 with 2 days of salting and 3 days of re-salting and 35 % replacing NaCl by KCl. Control: standard treatment was applied with 100 % of NaCL and salting time was 2 days and then 5 days to re-salting. The reduction in sodium content in processed pork Coppa produced no microbiological nor physicochemical changes. The reduction in salting together with salting and re-salting time and the partial replacement of NaCl by KCl resulted in reductions from 2,000 mg to 1,600 mg of sodium. Sensory evaluation demonstrated that the reduction in re-salting time was efficient using the ideal profile method which showed that treatments T1 and T2 were efficient in creating a product that meets consumer expectations.