Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 7 de 7
Filter
Add more filters










Database
Publication year range
1.
Arch Orthop Trauma Surg ; 144(3): 1297-1302, 2024 Mar.
Article in English | MEDLINE | ID: mdl-38172435

ABSTRACT

INTRODUCTION: Osteochondrosis dissecans (OCD) at the capitellum is a common pathology in young patients. Although arthroscopic interventions are commonly used, there is a lack of information about the accessibility of the defects during elbow arthroscopy by using standard portals. MATERIALS AND METHODS: An elbow arthroscopy using the standard portals was performed in seven fresh frozen specimens. At the capitellum, the most posterior and anterior cartilage surface reachable was marked with K-wires. Using a newly described measuring method, we constructed a circular sector around the rotational center of the capitellum. The intersection of K-wire "A" and "B" with the circular sector was marked, and the angles between the K-wires and the Rogers line, alpha angle for K-Wire "A" and beta angle for K-wire "B", and the corridor not accessible during arthroscopy was digitally measured. RESULTS: On average, we found an alpha angle of 53° and a beta angle of 104°. Leaving a sector of 51° which was not accessible via the standard portals during elbow arthroscopy. CONCLUSION: Non-accessible capitellar lesions during elbow arthroscopy should be considered preoperatively, and the informed consent discussion should always include the possibility of open procedures or the use of flexible instruments.


Subject(s)
Elbow Joint , Osteochondritis Dissecans , Humans , Arthroscopy/methods , Elbow , Elbow Joint/surgery , Osteochondritis Dissecans/surgery , Bone Wires
2.
J Dairy Sci ; 104(8): 8983-9001, 2021 Aug.
Article in English | MEDLINE | ID: mdl-34001361

ABSTRACT

Selecting for lower methane (CH4) emitting animals is one of the best approaches to reduce CH4 given that genetic progress is permanent and cumulative over generations. As genetic selection requires a large number of animals with records and few countries actively record CH4, combining data from different countries could help to expedite accurate genetic parameters for CH4 traits and build a future genomic reference population. Additionally, if we want to include CH4 in the breeding goal, it is important to know the genetic correlations of CH4 traits with other economically important traits. Therefore, the aim of this study was first to estimate genetic parameters of 7 suggested methane traits, as well as genetic correlations between methane traits and production, maintenance, and efficiency traits using a multicountry database. The second aim was to estimate genetic correlations within parities and stages of lactation for CH4. The third aim was to evaluate the expected response of economically important traits by including CH4 traits in the breeding goal. A total of 15,320 methane production (MeP, g/d) records from 2,990 cows belonging to 4 countries (Canada, Australia, Switzerland, and Denmark) were analyzed. Records on dry matter intake (DMI), body weight (BW), body condition score, and milk yield (MY) were also available. Additional traits such as methane yield (MeY; g/kg DMI), methane intensity (MeI; g/kg energy-corrected milk), a genetic standardized methane production, and 3 definitions of residual methane production (g/d), residual feed intake, metabolic BW (MBW), BW change, and energy-corrected milk were calculated. The estimated heritability of MeP was 0.21, whereas heritability estimates for MeY and MeI were 0.30 and 0.38, and for the residual methane traits heritability ranged from 0.13 to 0.16. Genetic correlations between different methane traits were moderate to high (0.41 to 0.97). Genetic correlations between MeP and economically important traits ranged from 0.29 (MY) to 0.65 (BW and MBW), being 0.41 for DMI. Selection index calculations showed that residual methane had the most potential for inclusion in the breeding goal when compared with MeP, MeY, and MeI, as residual methane allows for selection of low methane emitting animals without compromising other economically important traits. Inclusion of residual feed intake in the breeding goal could further reduce methane, as the correlation with residual methane is moderate and elicits a favorable correlated response. Adding a negative economic value for methane could facilitate a substantial reduction in methane emissions while maintaining an increase in milk production.


Subject(s)
Lactation , Methane , Animals , Australia , Canada , Cattle/genetics , Diet , Female , Lactation/genetics , Milk , Switzerland
3.
J Dairy Sci ; 103(2): 2024-2039, 2020 Feb.
Article in English | MEDLINE | ID: mdl-31864736

ABSTRACT

Since heritability of CH4 emissions in ruminants was demonstrated, various attempts to generate large individual animal CH4 data sets have been initiated. Predicting individual CH4 emissions based on equations using milk mid-infrared (MIR) spectra is currently considered promising as a low-cost proxy. However, the CH4 emission predicted by MIR in individuals still has to be confirmed by measurements. In addition, it remains unclear how low CH4 emitting cows differ in intake, digestion, and efficiency from high CH4 emitters. In the current study, putatively low and putatively high CH4 emitting Brown Swiss cows were selected from the entire Swiss herdbook population (176,611 cows), using an MIR-based prediction equation. Eventually, 15 low and 15 high CH4 emitters from 29 different farms were chosen for a respiration chamber (RC) experiment in which all cows were fed the same forage-based diet. Several traits related to intake, digestion, and efficiency were quantified over 8 d, and CH4 emission was measured in 4 open circuit RC. Daily CH4 emissions were also estimated using data from 2 laser CH4 detectors (LMD). The MIR-predicted CH4 production (g/d) was quite constant in low and high emission categories, in individuals across sites (home farm, experimental station), and within equations (first available and refined versions). The variation of the MIR-predicted values was substantially lower using the refined equation. However, the predicted low and high emitting cows (n = 28) did not differ on average in daily CH4 emissions measured either with RC or estimated using LMD, and no correlation was found between CH4 predictions (MIR) and CH4 emissions measured in RC. When individuals were recategorized based on CH4 yield measured in RC, differences between categories of 10 low and 10 high CH4 emitters were about 20%. Low CH4 emitting cows had a higher feed intake, milk yield, and residual feed intake, but they differed only weakly in eating pattern and digesta mean retention times. Low CH4 emitters were characterized by lower acetate and higher propionate proportions of total ruminal volatile fatty acids. We concluded that the current MIR-based CH4 predictions are not accurate enough to be implemented in breeding programs for cows fed forage-based diets. In addition, low CH4 emitting cows have to be characterized in more detail using mechanistic studies to clarify in more detail the properties that explain the functional differences found in comparison with other cows.


Subject(s)
Cattle/physiology , Feeding Behavior , Methane/analysis , Milk/chemistry , Spectrophotometry, Infrared/veterinary , Animals , Diet/veterinary , Digestion , Female , Lactation , Lasers , Methane/metabolism , Rumen/metabolism
4.
J Dairy Sci ; 88(4): 1540-51, 2005 Apr.
Article in English | MEDLINE | ID: mdl-15778324

ABSTRACT

Genetic analysis of production increase (ProdI), defined as an increase in production from early to later lactations, was conducted using data from the Holstein Association of Switzerland. This production increase describes the maturity rate of the cow. The data set contained 42,807 cows with a ProdI value. All cows had completed the first 3 lactations. Different formulas were derived for the computation of ProdI using 1) milk yields or energy-corrected milk yields and 2) yields from all 3 lactations or only 2 of them (first and second, first and third, second and third). Heritabilities of ProdI and genetic and phenotypic correlations of ProdI with somatic cell score, days to first service, nonreturn rate, longevity, and 27 conformation traits were estimated by univariate and bivariate sire models that included relationship among sires. Heritabilities for ProdI were low (0.06 to 0.08), but genetic variation among sires existed. For nonreturn rate and longevity, regressions on the sire estimated breeding values were estimated. Additive genetic correlations of ProdI were moderately favorable with somatic cell score (-0.22 to -0.33) and chest width (0.21 to 0.30), i.e., with traits often associated with long-lasting cows. Unfavorable correlations were found with angularity (-0.18 to -0.26). Regression coefficients from regressing ProdI on sire estimated breeding values for longevity tend to show favorable relationships between these 2 traits (0.10 to 0.20). Results show that animals can be selected for ProdI, as there is good genetic variation between bulls. ProdI is a potential trait to be included in selection indices, as it has favorable genetic relationships with economically important functional traits such as health, conformation, and longevity.


Subject(s)
Breeding , Cattle/genetics , Lactation/genetics , Milk/metabolism , Parity/genetics , Aging/genetics , Aging/physiology , Animals , Cattle/anatomy & histology , Cattle/physiology , Cell Count/veterinary , Dairying , Female , Fertility/genetics , Genetic Variation , Health Status , Lactation/physiology , Longevity/genetics , Male , Milk/cytology , Models, Genetic , Parity/physiology , Selection, Genetic , Switzerland
5.
J Dairy Sci ; 86(11): 3685-93, 2003 Nov.
Article in English | MEDLINE | ID: mdl-14672199

ABSTRACT

The objectives of this study were to estimate the genetic and environmental parameters between body condition score (BCS) and 27 conformation and 3 production traits in Swiss Holstein cattle. The dataset consisted of 31,500 first-lactation cows, which were daughters of 545 sires in 1867 herds. Bivariate sire models with relationships among sires were used to estimate parameters. Least squares means for BCS by lactation stage show that cows lose BCS up to 5 mo after calving and gain BCS prior to the next calving. Regression models showed that an increase in age and percentage of Holstein genes results in an increase and decrease in BCS, respectively. Heritability (h2) was 0.24 for BCS score, which indicates good potential for selection. Sire estimated breeding values for BCS ranged from -0.46 to +0.51 units. Heritabilities ranged from 0.08 (heel depth) to 0.46 (rump width) for type traits and 0.23 to 0.29 for yield traits. Genetic correlations of BCS with 8 conformation traits were significant; stature (0.28), heart girth (0.21), strength (0.17), loin (-0.39), body capacity (0.19), dairy character (-0.35), udder quality (-0.42), and teat position rear (-0.33). Milk production and body condition have an unfavorable genetic correlation (-0.12 to -0.17). These results show that selection for good body condition, body conformation, and optimal milk production is possible and their genetic associations reported here will be useful for designing Swiss breeding goals.


Subject(s)
Body Constitution/genetics , Cattle/genetics , Environment , Lactation/genetics , Selection, Genetic , Analysis of Variance , Animals , Body Composition/genetics , Breeding , Cattle/anatomy & histology , Dairying , Female , Male , Milk/metabolism , Models, Genetic , Phenotype
SELECTION OF CITATIONS
SEARCH DETAIL
...