EGR1 mediates MDR1 transcriptional activity regulating gemcitabine resistance in pancreatic cancer.

BACKGROUND: Gemcitabine is a cornerstone drug for the treatment of all stages of pancreatic cancer and can prolong the survival of patients with pancreatic cancer, but resistance to gemcitabine in pancreatic cancer patients hinders its efficacy. The overexpression of Early growth response 1(EGR1) in pancreatic ductal adenocarcinoma as a mechanism of gemcitabine chemoresistance in pancreatic cancer has not been explored. The major mechanisms of gemcitabine chemoresistance are related to drug uptake, metabolism, and action. One of the common causes of tumor multidrug resistance (MDR) to chemotherapy in cancer cells is that transporter proteins increase intracellular drug efflux and decrease drug concentrations by inducing anti-apoptotic mechanisms. It has been reported that gemcitabine binds to MDR1 with high affinity. The purpose of this research was to investigate the potential mechanisms by which EGR1 associates with MDR1 to regulate gemcitabine resistance in pancreatic cancer cells. METHODS: The following in vitro and in vivo techniques were used in this research to explore the potential mechanisms by which EGR1 binds to MDR1 to regulate gemcitabine resistance in pancreatic cancer cells. Cell culture; in vitro and in vivo study of EGR1 function by loss of function analysis. Binding of EGR1 to the MDR1 promoter was detected using the ChIP assay. qRT-PCR, Western blot assays to detect protein and mRNA expression; use of Annexin V apoptosis detection assay to test apoptosis; CCK8, Edu assay to test cell proliferation viability. The animal model of pancreatic cancer subcutaneous allograft was constructed and the tumours were stained with hematoxylin eosin and Ki-67 expression was detected using immunohistochemistry. FINDINGS: We revealed that EGR1 expression was increased in different pancreatic cancer cell lines compared to normal pancreatic ductal epithelial cells. Moreover, gemcitabine treatment induced upregulation of EGR1 expression in a dose- and time-dependent manner. EGR1 is significantly enriched in the MDR1 promoter sequence.Upon knockdown of EGR1, cell proliferation was impaired in CFPAC-1 and PANC-1 cell lines, apoptosis was enhanced and MDR1 expression was decreased, thereby partially reversing gemcitabine chemoresistance. In animal experiments, knockdown of EGR1 enhanced the inhibitory effect of gemcitabine on tumor growth compared with the sh-NC group. CONCLUSIONS: Our study suggests that EGR1 may be involved in the regulation of MDR1 to enhance gemcitabine resistance in pancreatic cancer cells. EGR1 could be a novel therapeutic target to overcome gemcitabine resistance in pancreatic cancer.

Artesunate Inhibits the Growth of Insulinoma Cells via SLC7A11/ GPX4-mediated Ferroptosis.

BACKGROUND: Artesunate (ART) has been recognized to induce ferroptosis in various tumor phenotypes, including neuroendocrine tumors. We aimed to investigate the effects of ART on insulinoma and the underlying mechanisms by focusing on the process of ferroptosis. METHODS: The CCK8 and colony formation assays were conducted to assess the effectiveness of ART. Lipid peroxidation, glutathione, and intracellular iron content were determined to validate the process of ferroptosis, while ferrostatin-1 (Fer-1) was employed as the inhibitor of ferroptosis. Subcutaneous tumor models were established and treated with ART. The ferroptosis-associated proteins were determined by western blot and immunohistochemistry assays. Pathological structures of the liver were examined by hematoxylin-eosin staining. RESULTS: ART suppressed the growth of insulinoma both in vitro and in vivo. Insulinoma cells treated by ART revealed signs of ferroptosis, including increased lipid peroxidation, diminished glutathione levels, and ascending intracellular iron. Notably, ART-treated insulinoma cells exhibited a decline in the expressions of catalytic component solute carrier family 7 member 11 (SLC7A11) and glutathione peroxidase 4 (GPX4). These alterations were negated by Fer-1. Moreover, no hepatotoxicity was observed upon the therapeutic dose of ART. CONCLUSION: Artesunate might regulate ferroptosis of insulinoma cells through the SLC7A11/GPX4 pathway.

LncRNA-Gm9866 promotes liver fibrosis by activating TGFß/Smad signaling via targeting Fam98b.

OBJECTIVE: The exact mechanism and target molecules of liver fibrosis have remained largely elusive. Here, we investigated the role of long noncoding RNA Gm9866(lncRNA-Gm9866) on liver fibrosis. METHODS: The transcription of lncRNA-Gm9866 in activated cells and mouse fibrotic livers was determined by quantitative polymerase chain reaction (qRT-PCR). The effects of lentivirus-mediated knockdown or overexpression of lncRNA-Gm9866 in liver fibrosis were examined in vitro and in vivo. Furthermore, bioinformatics analysis, cell samples validation, fluorescence in situ hybridization (FISH) co-localization, RNA binding protein immunoprecipitation (RIP), actinomycin D test and Western blot (WB) were carried out to explore the potential mechanism of lncRNA-Gm9866. RESULTS: The expression of α-smooth muscle actin (α-SMA), Collagen I (COL-1) and lncRNA-Gm9866 were significantly increased in tissues and cells. Overexpressing lncRNA-Gm9866 promoted the activation of hepatic stellate cells (HSCs). Silencing lncRNA-Gm9866 inhibited the activation of HSCs and transforming growth factor-ß1 (TGFß1) induced fibrosis. Overexpressing lncRNA-Gm9866 promoted hepatocytes (HCs) apoptosis and the expression of pro-fibrogenic genes, inhibited the proliferation and migration of HCs. Knockdown of lncRNA-Gm9866 inhibited the apoptosis of HCs, the expression of pro-fibrogenic genes, TGFß1 induced fibrosis and the occurrence of carbon tetrachloride (CCl4)-induced liver fibrosis, and promoted the proliferation and migration of HCs. Mechanistically, lncRNA-Gm9866 may directly bine with Fam98b. Silencing Fam98b in stably overexpressing lncRNA-Gm9866 cell lines reversed the increase of pro-fibrogenic genes and pro-apoptotic genes, fibrosis related pathway protein TGFß1, Smad2/3, p-Smad2/3 and Notch3 induced by overexpressing lncRNA-Gm9866. CONCLUSIONS: LncRNA-Gm9866 may regulate TGFß/Smad and Notch pathways by targeting Fam98b to regulate liver fibrosis. LncRNA-Gm9866 may be a new target for diagnosis and treatment of liver fibrosis.

Preparation and characterization of diphenyl silicone rubber/microfiber glass wool composite thermal control films.

Innovative research on the development of thermal control films for spacecraft surfaces is presented. A hydroxy-terminated random copolymer of dimethylsiloxane-diphenylsiloxane (PPDMS) was prepared from hydroxy silicone oil and diphenylsilylene glycol by a condensation reaction, and then liquid diphenyl silicone rubber base material (denoted as PSR) was obtained by adding hydrophobic silica. Microfiber glass wool (MGW) with a fiber diameter of ∼3 µm was added to the liquid PSR base material, which upon solidifying at room temperature, formed a 100 µm thick PSR/MGW composite film. The infrared radiation properties, solar absorption, thermal conductivity, and thermal dimensional stability of the film were evaluated. Moreover, the dispersion of the MGW in the rubber matrix was confirmed by optical microscopy and field-emission scanning electron microscopy. The PSR/MGW films exhibited a glass transition temperature of -106 °C, thermal decomposition temperature exceeding 410 °C, and low α/ε values. The homogeneous distribution of MGW in the PSR thin film resulted in a notable reduction in its linear expansion coefficient, as well as its thermal diffusion coefficient. Consequently, it exhibited a significant capacity for thermal insulation and retention. For the sample with 5 wt% of MGW, the linear expansion coefficient and thermal diffusion coefficient at 200 °C were reduced to 0.53% and 2.703 mm s-2, respectively. Thus, the PSR/MGW composite film has good heat-resistance stability and low-temperature endurance, along with low α/ε values and excellent dimensional stability. Additionally, it facilitates effective thermal insulation and temperature control, and can be an ideal material for thermal control coatings on spacecraft surfaces.

Improving the thermal stability of poly[methyl(trifluoropropyl)siloxane] by introducing diphenylsiloxane units.

A series of poly(methyl(trifluoropropyl)-diphenyl siloxane) (P(MTFPS-co-DPS)) was synthesized by polycondensation of diphenylsilanediol and methyltrifluoropropylsiloxanediol. Their chemical structures were investigated by gel permeation chromatography (GPC), Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), and differential scanning calorimeter (DSC). The effect of diphenylsiloxane (DPS) units on the thermal stability of poly[methyl(trifluoropropyl)siloxane] (PMTFPS) was studied by thermogravimetric analysis (TGA), isothermal degradation tests, and pyrolysis-gas chromatography-mass spectrometry (Py-GCMS). The results showed that the thermal stability of PMTFPS improved with the introduction of DPS units into the chain. In particular, the temperature for 5% mass loss in PMTFPS increased by 72 °C under a nitrogen atmosphere. In addition, the mechanism by which the DPS units improve the thermal stability of PMTFPS was also investigated.

Study of the radical polymerization mechanism and its application in the preparation of high-performance PMMA by reactive extrusion.

In this study, the mechanism of radical polymerization was further explored by pre-dissolving different polymers and studying the kinetics of the bulk polymerization of methyl methacrylate (MMA) under shear-free conditions. Based on the analysis of the conversion and absolute molecular weight, it was found that, contrary to the shearing effect, the inert polymer with viscosity was the key factor to preventing the mutual termination of radical active species and reducing the termination rate constant k t. Therefore, pre-dissolving the polymer could increase the polymerization rate and molecular weight of the system simultaneously, making the polymerization system enter the automatic acceleration zone faster and greatly reducing the generation of small molecular weight polymers, leading to a narrower molecular weight distribution. When the system entered the auto-acceleration zone, k t decreased rapidly and greatly and entered the second steady-state polymerization stage. Then, with the increase in the polymerization conversion, the molecular weight gradually increased, while the polymerization rate gradually decreased. In shear-free bulk polymerization systems, k t can be minimized and radical lifetimes maximized, but the polymerization system is at best a long-lived polymerization rather than a living polymerization. On this basis, by using MMA to pre-dissolve ultrahigh molecular weight PMMA and core-shell particles (CSR), the mechanical properties and heat resistance of the PMMA with pre-dissolved polymer obtained by reactive extrusion polymerization were better than for pure PMMA obtained under the same conditions. Compared with pure PMMA, the flexural strength and impact strength of PMMA with pre-dissolved CSR were up to 166.2% and 230.5%. With the same quality of CSR, the same two mechanical properties of the samples obtained by the blending method were just improved by 29.0% and 20.4%. This was closely related to the distribution of CSR in the pre-dissolved PMMA-CSR matrix with a distribution of spherical single particles 200-300 nm in diameter, which enabled PMMA-CSR to exhibit a high degree of transparency. This one-step process for realizing PMMA polymerization and high performance shows extremely high industrial application prospects.

Radical reaction extrusion copolymerization mechanism of MMA and N-phenylmaleimide and properties of products.

Using the method of bulk reactive extrusion radical copolymerization, N-phenyl maleimide (N-PMI) and styrene (St) and methyl methacrylate (MMA) were copolymerized. Through multi-detection gel permeation chromatography, bulk copolymerization kinetic analysis, UV-Vis spectroscopy, elemental analysis, and 1H NMR and 13C NMR analysis, it was found that, contrary to the classical free radical copolymerization theory, N-PMI and MMA could not only achieve copolymerization, but could even reach the level of azeotropic copolymerization. The factor that caused this change turned out to be the viscosity of the system. Secondly, through DSC, TG and GC-MS analysis, it was found that N-PMI units were randomly inserted into the molecular chain of PMMA, which greatly improved the stiffness of its molecular segments and the T g of the copolymer; at the same time, the insertion of N-PMI units also very effectively blocked the zipper-style de-end group degradation that often occurs in PMMA. When the mass content of the N-PMI copolymer reached 10%, the T g, initial degradation temperature and semi-degradation temperature of the copolymer increased by 19 °C, 58 °C and 47 °C, respectively. In addition, St, N-PMI can also significantly improve the processing fluidity of the PMMA copolymer, and after St participates were introduced in the copolymerization, the melt flow rate can be increased by 3.5 times. Furthermore, the copolymer not only had good mechanical properties and transparency, but also had excellent antibacterial properties against E. coli and S. aureus with only the effect of trace residual N-PMI in the copolymer. This provides an excellent reference for the preparation of antibacterial PMMA with high heat resistance, good mechanical properties and high transparency.

Antibacterial Mechanism of N-PMI and the Characteristics of PMMA-Co-N-PMI Copolymer.

Aiming at the excellent killing effect of N-phenylmaleimide (N-PMI) on microorganisms, this article used structural simulation analysis, fluorescence analysis, confocal laser scanning microscope and SEM to find that the double bond in N-PMI could interact with the sulfur groups in the membrane protein, changing its conformation, rupturing the plasma membrane of the cell, leaking the contents, and ultimately causing the death of the microorganisms. Therefore, once the double bond participated in the polymerization, N-PMI lost its antimicrobial function. N-PMI could achieve azeotropic copolymerization with MMA through reactive extrusion polymerization. N-PMI with a content of 5 % can be evenly inserted into the PMMA chain segment during the copolymerization reaction, thereby increasing the Tg of pure PMMA by up to 15 °C, which provided the PMMA-co-PMI copolymer with resistance to boiling water sterilization advantageous conditions. In addition, N-PMI with a content of 5 % has little effect on the transparency of PMMA after participating in the copolymerization. Moreover, the trace amount of residual N-PMI made the material have excellent antimicrobial function, and the bacteriostatic zone is extremely small, which provided an excellent guarantee for the safety and durability of the material. As a medical biological material, the PMMA-co-PMI copolymer has a good industrialization application prospects.

Permanent Antimicrobial Poly(vinylidene fluoride) Prepared by Chemical Bonding with Poly(hexamethylene guanidine).

Biofouling is one of the major obstacles in the application of poly(vinylidene fluoride) (PVDF) membrane in water and wastewater treatment. Developing antimicrobial PVDF could kill the attached microbe in the initial stage, thus theoretically inhibiting the formation of biofilm and delaying the occurrence of biofouling. However, the leaching of the antimicrobial component and deterioration of antimicrobial properties remain a concern. In this work, an antimicrobial PVDF (PVDF-g-AGE-PHMG) was developed by chemical bonding PVDF with poly(hexamethylene guanidine hydrochloride) (PHMG). The obtained PVDF-g-AGE-PHMG was blended with pristine PVDF to prepare an antimicrobial PVDF membrane. The results of Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) confirmed that PHMG was successfully grafted into the PVDF membrane. The morphologies, membrane porosity, water contact angles, antimicrobial properties, mechanical properties, and thermostability of the as-prepared membranes were investigated. When the content of PVDF-g-AGE-PHMG reached 10.0 wt %, the inhibition rates of both antimicrobial PVDF membrane against Escherichia coli and Staphylococcus aureus were above 99.99%. Due to the increased hydrophilicity, excellent antimicrobial activity, nonleaching of antimicrobial component, good mechanical properties, and thermostability, the as-prepared PVDF membrane has promising applications in the field of water treatment.

A controlled synthesis method of alkyl methacrylate block copolymers via living anionic polymerization at ambient temperature.

A controlled synthesis method of alkyl methacrylate block copolymers such as poly(methyl methacrylate)-b-poly(ethyl methacrylate) (PMMA-b-PEMA), poly(methyl methacrylate)-b-poly(butyl methacrylate) (PMMA-b-PBMA) and poly(ethyl methacrylate)-b-poly(butyl methacrylate) (PEMA-b-PBMA) via living anionic polymerization was innovated with potassium tert-butoxide (t-BuOK) as initiator in tetrahydrofuran(THF) solvent. The sequential anionic copolymerization could be smoothly conducted at 0 °C and the conversion of all monomers reached up to almost 100%. The copolymers were characterized by gel permeation chromatography (GPC), proton nuclear magnetic resonance (1H-NMR), fourier transform infrared spectroscopy (FTIR) and dynamic mechanical analysis (DMA). It was found that all block copolymers were in a narrow MWD while M w and weight ratio of each block were coincided with the theoretical values and feed ratio. DMA measurement indicated that all the block copolymers have two glass transition temperatures which have proved the certain microphase separation and the partial compatibility of the blocks. The similar results were achieved after changing feed order or addition amount. Furthermore, the reactivity ratio was also studied and confirmed that reactivity ratio of MMA was the largest among alkyl methacrylate. Based on these results, the anionic block copolymerization containing polar alkyl methacrylate monomers at a commercial scale starts to become possible.

Hydrogen-Bond Assembly of Poly(vinyl alcohol) and Polyhexamethylene Guanidine for Nonleaching and Transparent Antimicrobial Films.

The combination of transparency, antimicrobial activities, nonleaching of antimicrobial component and green preparation for poly(vinyl alcohol) (PVA) films is of importance for practical applications in industry. However, until now it remains a challenge. Herein, a facile antimicrobial PVA films containing polyhexamethylene guanidine (PHMG) is reported via a green solution casting method. Such PVA films show high transparency of 91%, above 99.99% of antimicrobial rates against Escherichia coli and Staphylococcus aureus, and nonleaching characteristic of PHMG due to the hydrogen-bond (H-bond) interaction between PHMG and PVA. The thermal stability and mechanical properties of the PVA films are further improved compared to neat PVA film. These antimicrobial films are expected to find promising applications in tissue engineering and packaging fields, which opens up a methodology to prepare nonleaching antimicrobial polymeric materials via H-bond.

Permanent antimicrobial cotton fabrics obtained by surface treatment with modified guanidine.

Antimicrobial cotton fabrics received much attention for the demand of health and hygiene fields. In this work, an antimicrobial copolymer was prepared via a reaction between polyhexamethylene guanidine hydrochloride and polypropylene glycol diglycidyl ether. The copolymer has amphiphilic characteristic and excellent antimicrobial properties. When the copolymer was adhered onto cotton fabrics through physical adsorption and chemical bonding using dipping-drying method, the resultant cotton fabrics had excellent and durable antimicrobial properties. The antimicrobial rates against Escherichia coli and Staphylococcus aureus were higher than 99.99% when the adsorption amount of the copolymer was above 35.5mg/g. The antimicrobial cotton fabrics remained the excellent antimicrobial properties even after laundered with detergent solution.

Design and fabrication of vapor-induced superhydrophobic surfaces obtained from polyethylene wax and silica nanoparticles in hierarchical structures.

The present work reported a simple and effective approach to fabricate a low-cost, self-cleaning and mechanically durable superhydrophobic coating. The coating was prepared by dip-coating certain substrates in an ethyl acetate suspension of silica nanoparticles (SiO2), hydroxyl acrylic resin, cross-linking agent and polyethylene wax (PEW). Through the control of the cooling and drying process, vapor-induced PEW micro-clusters were formed on the surfaces during the evaporation of ethyl acetate, and uniform carpet-like hierarchical structures were finally obtained by properly adjusting the dosage of PEW. Under the synergistic effect of hydrophobic SiO2 nanoparticles and PEW micro-clusters, the composite coating exhibited a remarkable superhydrophobicity with a contact angle of 163° ± 5° with 25 wt% content of PEW, as well as preeminent self-cleaning properties against various food liquids. Moreover, the coating still maintained its surface cleanliness when immersed in the cyclohexane or hexadecane, indicating a superior self-cleaning property against solvent-contamination. The mechanical durability test showed that the coating still kept its excellent water repellency after fairly intensive knife-scratching, tape peeling and 25 cycles of sandpaper abrasion under 100 g of loading, indicating a quite admirable mechanical durability. The facile preparation and high-performance of the coating make it quite suitable for manufacture on a large scale, which is favorable for the development of superhydrophobic coatings.

Fabrication of carbon nanospheres by the pyrolysis of polyacrylonitrile-poly(methyl methacrylate) core-shell composite nanoparticles.

Carbon nanospheres with a high Brunauer-Emmett-Teller (BET) specific surface area were fabricated via the pyrolysis of polyacrylonitrile-poly(methyl methacrylate) (PAN-PMMA) core-shell nanoparticles. Firstly, PAN-PMMA nanoparticles at high concentration and low surfactant content were controllably synthesized by a two-stage azobisisobutyronitrile (AIBN)-initiated semicontinuous emulsion polymerization. The carbon nanospheres were obtained after the PAN core domain was converted into carbon and the PMMA shell was sacrificed via the subsequent heat treatment steps. The thickness of the PMMA shell can be easily adjusted by changing the feeding volume ratio (FVR) of methyl methacrylate (MMA) to acrylonitrile (AN). At an FVR of 1.6, the coarse PAN cores were completely buried in the PMMA shells, and the surface of the obtained PAN-PMMA nanoparticles became smooth. The thick PMMA shell can inhibit the adhesion between carbon nanospheres caused by cyclization reactions during heat treatment. The carbon nanospheres with a diameter of 35-65 nm and a high BET specific surface area of 612.8 m2/g were obtained from the PAN-PMMA nanoparticles synthesized at an FVR of 1.6. The carbon nanospheres exhibited a large adsorption capacity of 190.0 mg/g for methylene blue, thus making them excellent adsorbents for the removal of organic pollutants from water.

Preparation of novel stable antibacterial nanoparticles using hydroxyethylcellulose and application in paper.

Taking advantage of the self-assembly between the components, novel stable antibacterial nanoparticles were efficiently fabricated via a facile one-step co-polymerization of acrylic acid (AA) and N,N'-methylenebisacrylamide (MBA) on a mixed aqueous solution of poly(hexamethylene guanidine hydrochloride) (PHMG) and hydroxyethylcellulose (HEC). The z-average hydrodynamic diameters of the nanoparticles ranged from 220 nm to 450 nm. The inner layer of the nanoparticles is composed of water-insoluble interpolymer complexes of PHMG and PAA networks, while the outer layer is composed of PHMG and HEC. The nanoparticles are stabilized by electrostatic interactions, hydrogen bonding interactions, and the chemical bonds. The nanoparticle solution remained stable in a wide pH range of 2.0-12.0 and at salt concentrations below 0.25 mol/L. The nanoparticles were incorporated into handsheets using a dipping treatment. The resulted handsheets exhibited excellent antimicrobial activities even after multiple water washing treatments. The nanoparticles are promising in fabricating paper, water-based coatings and textiles with permanent antibacterial activity.

Non-leaching antimicrobial biodegradable PBAT films through a facile and novel approach.

The antimicrobial thermoplastic starch (ATPS) containing guanidine-based polymers was obtained using a twin-screw extrusion with potato starch and polyhexamethylene guanidine hydrochloride (PHGH). Furthermore, the non-leaching antimicrobial biodegradable poly(butylene adipate-co-terephthalate) (PBAT) was prepared through reactive extrusion with PBAT and ATPS in the presence of the coupling agent, 2,2'-(1,3-phenylene)-bis (2-oxazoline) (PBO). Finally, the antimicrobial PBAT films were obtained by using a blown film extrusion system. The mechanical properties of the antimicrobial PBAT films varied with the contents of ATPS and thermoplastic starch (TPS). According to the test results of shaking flask method, the prepared antimicrobial PBAT films showed excellent antimicrobial activities (antimicrobial rate >99.99%) and rapid pathogen deactivation efficiency (antimicrobial rate >99.99% even within 15s of contact time). The water washing and ring diffusion tests demonstrated that the antimicrobial film was a non-leaching product. Inspiringly, the antimicrobial PBAT films with an excellent antimicrobial activity can be obtained even at a very low dosage of PHGH (1.0 mg/g PBAT film).

Morphology and mechanical properties of poly(butylene adipate-co-terephthalate)/potato starch blends in the presence of synthesized reactive compatibilizer or modified poly(butylene adipate-co-terephthalate).

The biodegradable poly(butylene adipate-co-terephthalate)(PBAT)/thermoplastic starch (TPS) composite has received considerable attention because of the environmental concerns raised by solid waste disposal. However, the application of PBAT/TPS blends was limited due to the poor mechanical properties originating from the incompatibility between PBAT and TPS. In this work, two approaches were developed to improve the mechanical properties of PBAT/TPS blends. One approach is to use compatibilizers, including the synthesized reactive compatibilizer - a styrene-maleic anhydride-glycidyl methacrylate (SMG) terpolymer, and the commercial compatibilizer (Joncryl-ADR-4368). The chemical structures of SMG were analyzed with (1)H NMR and FT-IR. The other approach is to use the modified PBAT (M-PBAT) to replace part of PBAT in the PBAT/TPS blends. M-PBATs with higher molecular weight were obtained via reactive extrusion of PBAT in the presence of a chain extender. The better dispersion of TPS in PBAT was observed in SEM images when using M-PBAT, leading to the higher tensile strength and elongation at break of PBAT/TPS blends. However, the elongation at break decreased in the presence of compatibilizer (SMG or 4368), though the tensile strength remained in a similar level or slightly higher. Overall, the tensile strength and the elongation at break of the resulting biodegradable PBAT/M-PBAT/TPS blends (TPS=40wt%) were above 27.0MPa and 500%, respectively, which is promising for various applications, including packaging and agricultural mulching films.

Polyhexamethylene guanidine hydrochloride shows bactericidal advantages over chlorhexidine digluconate against ESKAPE bacteria.

More information regarding the bactericidal properties of polyhexamethylene guanidine hydrochloride (PHMG) against clinically important antibiotic-resistant ESKAPE (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Enterobacter species) pathogens needs to be provided for its uses in infection control. The bactericidal properties of PHMG and chlorhexidine digluconate (CHG) were compared based on their minimum inhibitory concentrations (MICs), minimum bactericidal concentrations, and time-course-killing curves against clinically important antibiotic-susceptible and antibiotic-resistant ESKAPE pathogens. Results showed that PHMG exhibited significantly higher bactericidal activities against methicillin-resistant Staphylococcus aureus, carbapenem-resistant Klebsiella pneumoniae, and ceftazidime-resistant Enterobacter spp. than CHG. A slight bactericidal advantage over CHG was obtained against vancomycin-resistant Enterococcus faecium, ciprofloxacin- and levofloxacin-resistant Acinetobacter spp., and multidrug-resistant Pseudomonas aeruginosa. In previous reports, PHMG had higher antimicrobial activity against almost all tested Gram-negative bacteria and several Gram-positive bacteria than CHG using MIC test. These studies support the further development of covalently bound PHMG in sterile-surface materials and the incorporation of PHMG in novel disinfectant formulas.

Amphiphilic star block copolymers as gene carrier part I: synthesis via ATRP using calix[4]resorcinarene-based initiators and characterization.

In this work, a cationic star polymer [poly(2-dimethylamino)ethyl methacrylate (PDMAEMA)] was prepared via atom transfer radical polymerization (ATRP), using brominated calix[4]resorcinarene as an initiator. Hydrophobic moieties, methyl methacrylate (MMA) and butyl acrylate (BA), were further incorporated via "one-pot" method. Well-defined eight-armed star block copolymers bearing hydrophilic blocks inside and hydrophobic blocks outside were synthesized. The molecular weight, particle size, electrophoretic mobility and apparent charge density were determined by gel permeation chromatography (GPC), dynamic light scattering (DLS), phase analysis light scattering (PALS) and colloidal titration, respectively. The zeta potentials and apparent charge densities of the products exhibited the characteristics of polyelectrolyte. The incorporation of hydrophobic moieties generated electrostatic screening effect. The as-synthesized amphiphilic star copolymer is promising as a thermo-sensitive gene carrier for gene therapy.