Zwitterion Intercalated Manganese Dioxide Nanosheets as High-Performance Cathode Materials for Aqueous Zinc Ion Batteries.

In this study, a novel approach is introduced to address the challenges associated with structural instability and sluggish reaction kinetics of δ-MnO2 in aqueous zinc ion batteries. By leveraging zwitterionic betaine (Bet) for intercalation, a departure from traditional cation intercalation methods, Bet-intercalated MnO2 (MnO2-Bet) is synthesized. The positively charged quaternary ammonium groups in Bet form strong electrostatic interactions with the negatively charged oxygen atoms in the δ-MnO2 layers, enhancing structural stability and preventing layer collapse. Concurrently, the negatively charged carboxylate groups in Bet facilitate the rapid diffusion of H+/Zn2+ ions through their interactions, thus improving reaction kinetics. The resulting MnO2-Bet cathode demonstrates high specific capacity, excellent rate capability, fast reaction kinetics, and extended cycle life. This dual-function intercalation strategy significantly optimizes the electrochemical performance of δ-MnO2, establishing it as a promising cathode material for advanced aqueous zinc ion batteries.

Polyoxometalate Supported Single Transition Metal Atom as a Redox Mediator for Li-O2 Batteries.

Keggin-type polyoxometalate (POM) supported single transition metal (TM) atom (TM1/POM) as an efficient soluble redox mediator for Li-O2 batteries is comprehensively investigated by first-principles calculations. Among the pristine POM and four kinds of TM1/POM (TM = Fe, Co, Ni, and Pt), Co1/POM not only maintains good structural and thermodynamic stability in oxidized and reduced states but also exhibits promising electro(chemical) catalytic performance for both oxygen reduction reaction and oxygen evolution reaction (OER) in Li-O2 batteries with the lowest Gibbs free energy barriers. Further investigations demonstrate that the moderate binding strength of Li2-xO2 (x = 0, 1, and 2) intermediates on Co1/POM guarantees favorable Li2O2 formation and decomposition. Electronic structure analyses indicate that the introduced Co single atom as an electron transfer bridge can not only efficiently improve the electronic conductivity of POM but also regulate the bonding/antibonding states around the Fermi level of [Co1/POM-Li2O2]ox. The solvent effect on the OER catalytic performance and the electronic properties of [Co1/POM-Li2O2]ox with and without dimethyl sulfoxide solvent are also investigated.

MnO2 superstructure cathode with boosted zinc ion intercalation for aqueous zinc ion batteries.

The simultaneous intercalation of protons and Zn2+ ions in aqueous electrolytes presents a significant obstacle to the widespread adoption of aqueous zinc ion batteries (AZIBs) for large-scale use, a challenge that has yet to be overcome. To address this, we have developed a MnO2/tetramethylammonium (TMA) superstructure with an enlarged interlayer spacing, designed specifically to control H+/Zn2+ co-intercalation in AZIBs. Within this superstructure, the pre-intercalated TMA+ ions work as spacers to stabilize the layered structure of MnO2 cathodes and expand the interlayer spacing substantially by 28 % to 0.92 nm. Evidence from in operando pH measurements, in operando synchrotron X-ray diffraction, and X-ray absorption spectroscopy shows that the enlarged interlayer spacing facilitates the diffusion and intercalation of Zn2+ ions (which have a large ionic radius) into the MnO2 cathodes. This spacing also helps suppress the competing H+ intercalation and the formation of detrimental Zn4(OH)6SO4·5H2O, thereby enhancing the structural stability of MnO2. As a result, enhanced Zn2+ storage properties, including excellent capacity and long cycle stability, are achieved.

Hydrophobic Two-Dimensional Layered Superstructure of a Polyoxometalate Cluster as the Cathode Material for Aqueous Zinc-Ion Batteries.

Aqueous zinc-ion batteries hold promise for sustainable energy storage, yet challenges in finding high-performance cathode materials persist. Polyoxovanadates (POVs) are emerging as potential candidates due to their structural diversity and robust redox activity. Despite their potential, issues like dissolution in electrolytes, structural degradation, and byproduct accumulation persist. This work introduces a POV-based hydrophobic two-dimensional (2D) layered superstructure that addresses these challenges. The hydrophobic nature minimizes POV dissolution, enhancing structural stability and inhibiting phase transitions during cycling. The 2D arrangement ensures a larger surface area and improved electronic conductivity, resulting in faster kinetics and higher specific capacity. The superstructure demonstrates improved cycle life and an increased operating voltage, marking a significant advancement in POV-based cathode materials for aqueous zinc-ion batteries.

Chiral Transfer and Evolution in Cysteine Induced Cobalt Superstructures.

Chiral organic additives have unveiled the extraordinary capacity to form chiral inorganic superstructures, however, complex hierarchical structures have hindered the understanding of chiral transfer and growth mechanisms. This study introduces a simple hydrothermal synthesis method for constructing chiral cobalt superstructures with cysteine, demonstrating specific recognition of chiral molecules and outstanding electrocatalytic activity. The mild preparation conditions allow in situ tracking of chirality evolution in the chiral cobalt superstructure, offering unprecedented insights into the chiral transfer and amplification mechanism. The resulting superstructures exhibit a universal formation process applicable to other metal oxides, extending the understanding of chiral superstructure evolution. This work contributes not only to the fundamental understanding of chirality in self-assembled structures but also provides a versatile method for designing chiral inorganic nanomaterials with remarkable molecular recognition and electrocatalytic capabilities.

Sulfur-Defect-Induced TiS1.94 as a High-Capacity and Long-Life Anode Material for Zinc-Ion Batteries.

Aqueous zinc-ion batteries (ZIBs) are competitive among the elective candidates for electrochemical energy storage systems, but the intrinsic drawbacks of zinc metal anodes such as dendrites and corrosion severely hinder their large-scale application. Developing alternative anode materials capable of high reversibility and stability for storing Zn2+ ions is a feasible approach to circumvent the challenge. Herein, a sulfur-defect-induced TiS1.94 (D-TiS1.94) as a promising intercalation anode material for ZIBs is designed. The abundant Zn2+-storage active sites and lower Zn2+ migration barrier induced by sulfur defects endow D-TiS1.94 with a high capacity for Zn2+-storage (219.1 mA h g-1 at 0.05 A g-1) and outstanding rate capability (107.3 mA h g-1 at 5 A g-1). In addition, a slight volume change of 8.1% is identified upon Zn2+ storage, which favors a prolonged cycling life (50.3% capacity remaining in 1500 cycles). More significantly, the D-TiS1.94||ZnxMnO2 full battery demonstrates a high discharge capacity of 155.7 mA h g-1 with a capacity retention of 59.8% in 400 cycles. It has been estimated that the high-capacity, low-operation voltage, and long-life D-TiS1.94 can be a promising component of the ZIB anode material family, and the strategy proposed in this work will provide guidance to the defect engineering of high-performance electrode materials toward energy storage applications.

Electrochemical Failure Mechanism of δ-MnO2 in Zinc Ion Batteries Induced by Irreversible Layered to Spinel Phase Transition.

Phase transitions of Mn-based cathode materials associated with the charge and discharge process play a crucial role on the rate capability and cycle life of zinc ion batteries. Herein, a microscopic electrochemical failure mechanism of Zn-MnO2 batteries during the phase transitions from δ-MnO2 to λ-ZnMn2O4 is presented via systematic first-principle investigation. The initial insertion of Zn2+ intensifies the rearrangement of Mn. This is completed by the electrostatic repulsion and co-migration between guest and host ions, leading to the formation of λ-ZnMn2O4. The Mn relocation barrier for the λ-ZnMn2O4 formation path with 1.09 eV is significantly lower than the δ-MnO2 re-formation path with 2.14 eV, indicating the irreversibility of the layered-to-spinel transition. Together with the phase transition, the rearrangement of Mn elevates the Zn2+ migration barrier from 0.31 to 2.28 eV, resulting in poor rate performance. With the increase of charge-discharge cycles, irreversible and inactive λ-ZnMn2O4 products accumulate on the electrode, causing continuous capacity decay of the Zn-MnO2 battery.

Synergistic Cation-π Interactions and PEDOT-Based Protective Double-Layer for High Performance Zinc Anode.

Ensuring effective and controlled zinc ion transportation is crucial for functionality of the solid electrolyte interphase (SEI) and overall performance in zinc-based battery systems. Herein the first-ever demonstration of incorporate cation-π interactions are provided in the SEI to effectively facilitate uniform zinc ion flux. The artificial SEI design involves the immobilization of 4-amino-p-terphenyl (TPA), a strong amphiphilic cation-π interaction donor, as a monolayer onto a conductive poly(3,4-ethylenedioxythiophene) (PEDOT) matrix, which enable the establishment of a robust network of cation-π interactions. Through a carefully-designed interfacial polymerization process, a high-quality, large-area, robust is achieved, thin polymeric TPA/PEDOT (TP) film for the use of artificial SEI. Consequently, this interphase exhibits exceptional cycling stability with low overpotential and enables high reversibility of Zn plating/stripping. Symmetrical cells with TP/Zn electrodes can be cycled for more than 3200 hours at 1 mA cm-2 and 1 mAh cm-2 . And the asymmetric cells can cycle 3000 cycles stably with a high Coulomb efficiency of 99.78%. Also, under the extreme conditions of lean electrolyte and low N/P ratio, the battery with TP protective layer can still achieve ultra-stable cycle.

Trade-Off between Rough and Smooth Electrode Surfaces toward Stable Zn Stripping/Plating in Aqueous Electrolytes.

The effects of surface roughness on the performance of the Zn metal anode in aqueous electrolytes are investigated by experiments and computational simulations. Smooth surfaces can homogenize the nucleation and growth of Zn, which helps to form a flat Zn anode under high current density. In spite of these advantages, the whole surface of the smooth electrode serves as the reactive contact area for parasitic reactions, generating severe hydrogen evolution, corrosion, and byproduct formation, which seriously hinder the long-term cycle stability of the Zn anode. To trade off this double-sided effect, we identify a medium degree of surface roughness that could stabilize the Zn anode for 1000 h cycling at 1.0 mAh cm-2. The electrode also enabled stable cycling for 800 h at a high current density of 5.0 mAh cm-2. This naked Zn metal anode with optimized surface roughness holds great promise for direct use in aqueous zinc ion batteries.

Ionic Layer Epitaxy Growth of Organic/Inorganic Composite Protective Layers for Large-Area Li and Zn Metal Anodes.

Li and Zn metal batteries using organic and aqueous electrolytes, respectively, are desirable next-generation energy storage systems to replace the traditional Li-ion batteries. However, their cycle life and safety performance are severely constrained by a series of issues that are attributed to dendrite growth. To solve these issues, a nanothick ZnO-oleic acid (ZnO-OA) composite protective layer is developed by a facile ionic layer epitaxy method. The ZnO-OA layer provides strong lithophilic and zincophilic properties, which can effectively induce uniform ion deposition. As a result, the ZnO-OA protected Li and Zn metal anodes can cycle stably for over 600 and 1000 h under a large current density of 10 mA cm-2. Employing the ZnO-OA protected anodes, the Li||LiFePO4 cell can maintain a capacity retention of 99.5% after 600 cycles at a 1 C rate and the Zn||MnO2 cell can operate stably for 1000 cycles at 1 A g-1 current density.

Pure Amorphous and Ultrathin Phosphate Layer with Superior Ionic Conduction for Zinc Anode Protection.

Fast and uniform ion transport within the solid electrolyte interphase (SEI) is considered a crucial factor for ensuring the long-term stability of metal electrodes. In this study, we present the fabrication of ultrathin artificial interphases consisting of a zinc phosphate nanofilm with pure amorphous characteristics and a surfactant overlayer. The thickness of the interphases can be precisely controlled within the range of a few tens of nanometers. We explore the impact of artificial SEI structure, including thickness and crystallinity, on its protective capabilities. The pure amorphous phosphate layer with optimized nanoscale thickness is found to provide an abundance of short and isotropic ion migration pathways and a low diffusion energy barrier. These features facilitate rapid and homogeneous Zn2+ transportation, resulting in compact and planar zinc deposition. Meanwhile, the hydrophobic alkyl moieties of the overlayer prevent disassociation of water at the interface. As a result, this nanofilm endures ultralong cycling stability with a low overpotential and enables high Zn plating/stripping reversibility. The Zn||MnO2 full cell shows a stable cycle life for 700 cycles under practical conditions of lean electrolyte, high areal capacity cathode, and limited Zn excess. These findings provide insights into the design and optimization of SEI layers for protection of metal anodes.

Defect-Engineered VS2 Electrocatalysts for Lithium-Sulfur Batteries.

Defective two-dimensional transition metal dichalcogenides can be effective electrocatalysts for Li-S batteries, but the relationship between defect types and battery performance is unclear. In this work, we designed S vacancy-type SV-VS2 and V self-intercalated-type VI-VS2 and measured their catalytic activities in Li-S batteries. Compared with self-intercalating V atoms, S vacancies accelerated Li+ diffusion and SV-VS2 as a Li+ "reservoir" promoted the sulfur conversion kinetics significantly. In addition, the presence of sulfur vacancies promoted the lithiation behavior of SV-VS2 during discharge, leading to an enhancement of the catalytic ability of SV-VS2. However, this lithiation phenomenon weakened the catalytic activity of VI-VS2. Overall, SV-VS2 had better adsorption and catalytic activity. Li-S batteries with SV-VS2-coated separators delivered high rate performance and excellent cycling stability, with a capacity decay rate of 0.043% over 880 cycles at 1.0 C. This work provides an effective strategy for designing efficient Li-S battery electrocatalysts using defect engineering.

Oxygen Radical Anion Substituted Iron Phthalocyanine as an Effective Redox Mediator for Li-O2 Batteries.

Transition metal phthalocyanines are potential soluble redox mediators for Li-O2 batteries. In this work, effective strategies to control the redox potentials and activities of iron phthalocyanine (FePc) based redox mediators are designed by the introduction of electron-withdrawing or electron-donating groups. Substituted electron-donating groups can shift the oxidation potential of FePc to a higher energy level, consequently reducing the charging voltage of Li-O2 batteries. Especially, oxygen radical anion (-O-) modified FePc (FePc-O-) shows the most significant improvement to the oxygen reduction and evolution reactions of Li-O2 batteries. Electronic analysis indicates that -O- substitution can break the symmetry of electronic structures of FePc which further tunes the reduction of O2 and the oxidation of Li2O2. Detailed reaction mechanisms of (FePc-O-)-mediated Li-O2 batteries are proposed based on first-principles molecular dynamics simulations and thermodynamic free energy calculations.

A Multifunctional Organic Electrolyte Additive for Aqueous Zinc Ion Batteries Based on Polyaniline Cathode.

The practical applications of aqueous zinc ion batteries are hindered by the formation of dendrites on the anode, the narrow electrochemical window of electrolyte, and the instability of the cathode. To address all these challenges simultaneously, a multi-functional electrolyte additive of 1-phenylethylamine hydrochloride (PEA) is developed for aqueous zinc ion batteries based on polyaniline (PANI) cathode. Experiments and theoretical calculations confirm that the PEA additive can regulate the solvation sheath of Zn2+ and form a protective layer on the surface of the Zn metal anode. This broadens the electrochemical stability window of the aqueous electrolyte and enables uniform deposition of Zn. On the cathode side, the Cl- anions from PEA enter the PANI chain during charge and release fewer water molecules surrounding the oxidized PANI, thus suppressing harmful side reactions. When used in a Zn||PANI battery, this cathode/anode compatible electrolyte exhibits excellent rate performance and long cycle life, making it highly attractive for practical applications.

Uniform Zinc Deposition Regulated by a Nitrogen-Doped MXene Artificial Solid Electrolyte Interlayer.

The dendrite growth and side reactions of zinc metal anode in mildly acidic electrolytes seriously hinder the practical application of aqueous zinc-ion battery. To address these issues, an artificial protective layer of nitrogen-doped MXene (NMX) is used to protect the zinc anode. The NMX protective layer has high conductivity and uniformly distributed zincophilic sites, which can not only homogenize the local electric field on the electrode interface but also accelerate the kinetics for Zn deposition. As a result, the NMX protective layer induces uniform zinc deposition and reduces the overpotential of the electrode. Encouragingly, this NMX-protected Zn anode can cycle stably for 1900 h at 1 mA cm-2 and 1 mAh cm-2 . In asymmetric cells, it achieves high cycle reversibility with an average Coulomb efficiency of 99.79% for 4800 cycles at 5 mA cm-2 .

Physicochemical Synergistic Separator Coating Induces Uniform and Rapid Deposition of Li and Zn Ions.

Li and Zn metal batteries are the most promising candidates to replace conventional Li-ion batteries. However, a series of issues, especially dendrites caused by uneven deposition of cations during charge-discharge cycles, hinder their practical application. Here, we proposed a facile separator modification method which combines physical and chemical forces to regulate uniform and rapid deposition of both Li+ and Zn2+. Physically, the electronegativity of modified separators drives rapid transport of metal ions via a surface diffusion mode. Chemically, the polar surface functional groups on coated separators induce uniform deposition of metal ions so that the dendrite growth is effectively inhibited. As a result, the Li and Zn metal anodes employing modified separators can cycle stably for over 1000 h under a large current density of 10 mA cm-2.

Two-Dimensional Organic-Inorganic Heterostructure as a Multifunctional Protective Layer for High Performance Zinc Metal Anode.

Dendrite growth and side reactions of Zn metal anodes remain unresolved obstacles for practical application of aqueous Zn ion batteries. Herein, a two-dimensional (2D) organic-inorganic heterostructure with controlled thickness was constructed as a protective layer for a Zn metal anode. The reduction of uniformly distributed polyoxometalate in the layer causes a negative charge density gradient, which can accelerate zinc ion transfer, homogenize zinc deposition, and shield sulfates at the electrode interface, while the exposed hydrophobic alkyl chain of the layer can isolate the direct contact of water with the Zn anode. As a result of the synergetic effect, this 2D organic-inorganic heterostructure enables high Zn plating/stripping reversibility, with high average Coulombic efficiencies of 99.97% for 3700 cycles at 2 mA cm-2. Under high Zn utilization conditions, a high areal-capacity full cell with hundreds of cycles was demonstrated.

Stabilizing Interface pH by Mixing Electrolytes for High-Performance Aqueous Zn Metal Batteries.

Aqueous zinc metal batteries with mild acidic electrolytes are considered promising candidates for large-scale energy storage. However, the Zn anode suffers from severe Zn dendrite growth and side reactions due to the unstable interfacial pH and the absence of a solid electrolyte interphase (SEI) protective layer. Herein, a novel and simple mixed electrolyte strategy is proposed to address these problems. The mixed electrolytes of 2 M ZnSO4 and 2 M Zn (CF3 SO3 )2 can efficiently buffer the interfacial pH and induce the in situ formation of the organic-inorganic SEI layer, which eliminates dendrite growth and prevents side reactions. As a result, Zn anodes in mixed electrolyte exhibit a lifespan enhancement over 400 times, endure stable cycling over 270 h at a high DOD of 62% and achieve high Zn plating/stripping reversibility with an average CE of 99.5% for 1000 cycles at 1 mA cm-2 . The findings pave the way for developing practical electrolyte systems for Zn batteries.

Critical Factors Affecting the Catalytic Activity of Redox Mediators on Li-O2 Battery Discharge.

Redox mediators (RMs) have a substantial ability to govern oxygen reduction reaction (ORR) in Li-O2 batteries, which can realize large capacity and high-rate capability. However, studies on understanding RM-assisted ORR mechanisms are still in their infancy. Herein, a quinone-based molecule, vitamin K1 (VK1), is first used as the ORR RM for Li-O2 batteries, together with 2,5-di-tert-butyl-1,4-benzoquinone (DBBQ), to elucidate key factors on the catalytic activity of RMs. By combining experiments and first-principle computations, we demonstrate that the reduced VK1 has strong oxygen affinity and can effectively retard the deposition of Li2O2 films on the electrode surface, thereby guaranteeing enough active sites for electron transfer. Besides, the low reaction free energy of disproportionation of the Li(VK1)O2 intermediate into Li2O2 also significantly accelerates the ORR process. Consequently, the catalytic activity of VK1 is significantly boosted, and the discharge capacity of VK1-assisted batteries is 3.2-4.5 times that of DBBQ-assisted batteries. This study provides new insight for better understanding the working roles of RMs in Li-O2 batteries.

First-principles calculations of bulk WX2(X = Se, Te) as anode materials for Na ion battery.

Two-dimensional transition metal dichalcogenides are promising anode materials for Na ion batteries (NIBs). In this study, we carried out a comprehensive investigation to analyze the structural, electrochemical characteristics, and diffusion kinetics of bulk WX2(X = Se, Te) by employing first-principles calculation in the framework of density functional theory. We deeply studied the full intercalation of Na+in WX2and diagnosed NayX phase through conversion reaction mechanism. The voltage range of 2.05-0.48 V vs Na/Na+for NayWSe2and 2.26-0.65 V for NayWTe2(y= 0-3) have been noted. Density of states analysis showed metallic behavior of WX2(X = Se, Te) during sodiation. The facile pathways for Na+mobility through WX2have shown that tungsten dichalcogenides are inferred as excellent electrode material for NIBs.