A flexible metal nano-mesh strain sensor with the characteristic of spontaneous functional recovery after fracture damage.

Developing flexible sensors with high sensitivity, a wide sensing range, and good stability is a challenge. By replicating the anodic aluminum oxide (AAO) hole structure, we proposed new strain sensors with Pt nano-mesh films embedded in polydimethylsiloxane (PDMS) films. The nano-mesh strain sensor exhibited high sensitivity (a gauge factor of 4500) and a sensing range as high as 90%. The resistance remained almost completely unchanged after 1500 loading/unloading cycles of 15% strain, demonstrating the high repeatability and stability of the sensor. In addition, even if the nano-mesh experienced an open circuit by overstraining, the sensor can still measure strain within 45% after recovery. The capability of spontaneous functional recovery after fractural damage considerably extends its service life. Finally, the nano-mesh strain sensors were worn on the wrist and neck to monitor wrist movement and throat vibration, respectively. Signals corresponding to swallowing, throat clearing, and letter pronunciation were clearly distinguished from the peak value and signal patterns. These results indicate that the metal nano-mesh strain sensors have great potential for applications in wearable devices, electronic skin, and flexible robotics.

Confinement and Protection of Skyrmions by Patterns of Modified Magnetic Properties.

Magnetic skyrmions are versatile topological excitations that can be used as nonvolatile information carriers. The confinement of skyrmions in channels is fundamental for any application based on the accumulation and transport of skyrmions. Here, we report a method that allows effective position control of skyrmions in designed channels by engineered energy barriers and wells, which is realized in a magnetic multilayer film by harnessing the boundaries of patterns with modified magnetic properties. We experimentally and computationally demonstrate that skyrmions can be attracted or repelled by the boundaries of areas with modified perpendicular magnetic anisotropy and Dzyaloshinskii-Moriya interaction. By fabricating square and stripe patterns with modified magnetic properties, we show the possibility of building reliable channels for confinement, accumulation, and transport of skyrmions, which effectively protect skyrmions from being destroyed at the device edges. Our results are useful for the design of spintronic applications using either static or dynamic skyrmions.

Self-Assembled Hexagonal Superparamagnetic Cone Structures for Fabrication of Cell Cluster Arrays.

In this study, we demonstrated that arrays of cell clusters can be fabricated by self-assembled hexagonal superparamagnetic cone structures. When a strong out-of-plane magnetic field was applied to the ferrofluid on a glass substrate, it will induce the magnetic poles on the upper/lower surfaces of the continuous ferrofluid to increase the magnetostatic energy. The ferrofluid will then experience hydrodynamic instability and be split into small droplets with cone structures because of the compromising surface tension energy and magnetostatic energy to minimize the system's total energy. Furthermore, the ferrofluid cones were orderly self-assembled into hexagonal arrays to reach the lowest energy state. After dehydration of these liquid cones to form solid cones, polydimethylsiloxane was cast to fix the arrangement of hexagonal superparamagnetic cone structures and prevent the leakage of magnetic nanoparticles. The U-343 human neuronal glioblastoma cells were labeled with magnetic nanoparticles through endocytosis in co-culture with a ferrofluid. The number of magnetic nanoparticles internalized was (4.2 ± 0.84) × 106 per cell by the cell magnetophoresis analysis. These magnetically labeled cells were attracted and captured by hexagonal superparamagnetic cone structures to form cell cluster arrays. As a function of the solid cone size, the number of cells captured by each hexagonal superparamagnetic cone structure was increased from 48 to 126 under a 2000 G out-of-plane magnetic field. The local magnetic field gradient of the hexagonal superparamagnetic cone was 117.0-140.9 G/mm from the cell magnetophoresis. When an external magnetic field was applied, we observed that the number of protrusions of the cell edge decreased from the fluorescence images. It showed that the local magnetic field gradient caused by the hexagonal superparamagnetic cones restricted the cell growth and migration.

Structural transformations of growing thin colloidal crystals in confined space via convective assembly.

The structural evolution of growing thin colloidal crystals in a confined space via the convective assembly technique has been investigated. The thin colloidal crystals were grown in a wedge-shaped cell, where the height of the cell increased with increased crystal growth. Triangle and square patterns, denoted as [111]- and [100]-oriented grains, respectively, were formed alternately as the height of the cell increased. The structural transformation was associated with an increase in the number of layers when the n-layer [100]-oriented grains changed to n + 1-layer [111]-oriented grains. Between the different grain structures, a stripe pattern was observed, which was a transitional region, where particle configuration gradually changed. The structural transformation occurred through the continuous change of particle configuration rather than through the abrupt formation of a grain boundary. The interval of the strip pattern lengthened as the number of layers increased, which is understood to be the structure with the highest packing density. The findings of the study give a better insight into convective assembly in a confined space, and also contribute to the greater structural control of colloidal crystals, useful for a number of applications.