[Medical Emergency Preparedness in offshore wind farms : New challenges in the german north and baltic seas]. / Notfallmedizinische Versorgung in Offshore-Windparks : Neue Herausforderungen in der deutschen Nord- und Ostsee.

BACKGROUND: Offshore windfarms are constructed in the German North and Baltic Seas. The off-coast remoteness of the windfarms, particular environmental conditions, limitations in offshore structure access, working in heights and depths, and the vast extent of the offshore windfarms cause significant challenges for offshore rescue. Emergency response systems comparable to onshore procedures are not fully established yet. Further, rescue from offshore windfarms is not part of the duty of the German Maritime Search and Rescue Organization or SAR-Services due to statute and mandate reasons. Scientific recommendations or guidelines for rescue from offshore windfarms are not available yet. The present article reflects the current state of medical care and rescue from German offshore windfarms and related questions. The extended therapy-free interval until arrival of the rescue helicopter requires advanced first-aid measures as well as improved first-aider qualification. Rescue helicopters need to be equipped with a winch system in order to dispose rescue personnel on the wind turbines, and to hoist-up patients. For redundancy reasons and for conducting rendezvous procedures, adequate sea-bound rescue units need to be provided. In the light of experiences from the offshore oil and gas industry and first offshore wind analyses, the availability of professional medical personnel in offshore windfarms seems advisible. Operational air medical rescue services and specific offshore emergency reaction teams have established a powerful rescue chain. Besides the present development of medical standards, more studies are necessary in order to place the rescue chain on a long-term, evidence-based groundwork. A central medical offshore registry may help to make a significant contribution at this point.

Telemetric assessment of bone healing with an instrumented internal fixator: a preliminary study.

In an interdisciplinary project involving electronic engineers and clinicians, a telemetric system was developed to measure the bending load in a titanium internal femoral fixator. As this was a new device, the main question posed was: what clinically relevant information could be drawn from its application? As a first clinical investigation, 27 patients (24 men, three women) with a mean age of 38.4 years (19 to 66) with femoral nonunions were treated using the system. The mean duration of the nonunion was 15.4 months (5 to 69). The elasticity of the plate-callus system was measured telemetrically until union. Conventional radiographs and a CT scan at 12 weeks were performed routinely, and healing was staged according to the CT scans. All nonunions healed at a mean of 21.5 weeks (13 to 37). Well before any radiological signs of healing could be detected, a substantial decrease in elasticity was recorded. The relative elasticity decreased to 50% at a mean of 7.8 weeks (3.5 to 13) and to 10% at a mean of 19.3 weeks (4.5 to 37). At 12 weeks the mean relative elasticity was 28.1% (0% to 56%). The relative elasticity was significantly different between the different healing stages as determined by the CT scans. Incorporating load measuring electronics into implants is a promising option for the assessment of bone healing. Future application might lead to a reduction in the need for exposure to ionising radiation to monitor fracture healing.

Three-dimensional load measurements in an external fixator.

On the basis of a six-degree-of-freedom adjustable fracture reduction hexapod external fixator, a system which can be used for measuring axial and shear forces as well as torsion and bending moments in the fixator in vivo was developed. In a pilot study on 9 patients (7 fresh fractures and 2 osteotomies of the tibia), the load in the fixator during the healing process was measured after 2, 4, 8 and 12 weeks and at fixator removal. The measured values enabled both the type of fracture to be determined as well as the monitoring of the healing process. In well-reduced type A3 fractures small axial (direction of the bone axis) forces were found in the fixator. A2, B2 and C3 fractures showed distinct axial forces, which decreased during the healing process, according to an increasing load transfer over the bone. Bending moments in the fixator showed good correspondence with the clinical healing process, except in the case of a C3 fracture. A combination of bending moment and axial force proved to be particularly suitable to assess fracture healing. In transverse fractures, the well-known resorption phenomenon of bone in the fracture gap at approximately 4 weeks was detected by the system. Compared with other external fixator load measurements in vivo, the hexapod offers the advantage of being able to measure all forces and moments in the fixator separately and with a relatively simple mechanical arrangement. In our opinion, it will be possible to control fracture healing using this system, thereby minimizing radiation exposure from radiographs. Furthermore, the measurement system is a step towards the development of external fixator systems that enable automatic adjustments of the callus mechanical situation ("automatic dynamization") and inform the patients about the optimal weight bearing of their extremity ("intelligent fixator").

[Experiences in the treatment of midfacial fractures using a fixed-angle osteosynthetic system. Biomechanical results]. / Osteosynthetische Versorgung von Mittelgesichtsfrakturen mit einem multidirektionalen winkelstabilen Plattensystem. Biomechanische Ergebnisse.

AIM: Fixed-angle osteosynthetic systems are characterized by mechanical "locking" of the osteosynthetic screw and plate. These systems have found increasing acceptance and use for osteosynthetic fixation and temporary reconstruction of the mandible. The aim of this study was to investigate the applicability and performance of fixed-angle systems in the treatment of midfacial fractures. MATERIAL AND METHOD: A newly developed fixed-angle osteosynthetic plate system (smart lock) was compared to a conventional system using fresh human skulls. The iatrogenically produced zygomatic fractures of the human skulls were treated by osteosynthesis and biomechanically tested. Furthermore, in a dynamic test series, an artificial bone was subjected to an alternating force of 15 N of up to 1,000,000 cycles. The new screws and plates were subjected to further biomechanical tests. RESULTS: The tests using the fixed-angle implants revealed that an increase of stability of up to 40% can be expected after osteosynthetic fixation. Furthermore, the plates resisted 1,000,000 cycles of alternating forces, whereby the conventional systems failed after 170,000 cycles on the average. CONCLUSION: Fixed-angle systems, due to their construction, provide a high degree of stability even in thin bones of the midface. They appear to be promising for the treatment of midfacial fractures.

A hexapod robot external fixator for computer assisted fracture reduction and deformity correction.

Using hexapod robot kinematics, an external fixator adjustable in all six spatial degrees of freedom was developed. As usual with a robot system, bone movements can be accomplished with high precision. Contrary to conventional external fixators any three-dimensional movement is realisable without giving up stability or the necessity to change parts of the construction during the treatment. At first a manually controlled fixator with appropriate software was developed. Then electromotor elements were added, resulting in a "fracture reduction robot" and a fixator featuring load measurement capabilities was built. Finally the concept was extended into an "intelligent fixator" which will accomplish automatically controlled fracture and deformity treatment in the future.

[Theory and software of the hexapod external fixator]. / Theorie und Software des Hexapod Fixateurs externe.

Using hexapod kinematics (Stewart platform), an external fixator was developed that can be adjusted in all six spatial degrees of freedom by means of six linear adjusting elements. With such a system, any desired three-dimensional bone movements, for example, fracture reduction or deformity correction, can be effected exactly, without having temporarily to compromise any stability already achieved or to rearrange the construction during treatment. Since the introduction of the hexapod principle by Stewart in 1965, computerized control has been deemed necessary for its application. This paper describes the mathematical basis and the software developed for clinical use. Mathematical procedures are needed for the calculation of the inverse and forward kinematics of the hexapod, and for the description of three-dimensional movements.