Localization Effect in Photoelectron Transport Induced by Alloy Disorder in Nitride Semiconductor Compounds.

Near-band-gap photoemission spectroscopy experiments were performed on p-GaN and p-InGaN/GaN photocathodes activated to negative electron affinity. The photoemission quantum yield of the InGaN samples with more than 5% of indium drops by more than 1 order of magnitude when the temperature is decreased while it remains constant for lower indium content. This drop is attributed to a freezing of photoelectron transport in p-InGaN due to electron localization in the fluctuating potential induced by the alloy disorder. This interpretation is supported by the disappearance at low temperature of the peak in the photoemission spectrum that corresponds to the contribution of the photoelectrons relaxed at the bottom of the InGaN conduction band.

Violet semipolar (20-2-1) InGaN microcavity light-emitting diode with a 200†nm ultra-short cavity length.

Violet semipolar (20-2-1) InGaN microcavity light-emitting diodes (MC-LED) with a 200 nm ultra-short cavity length were demonstrated. The emission wavelength was 419 nm with a spectrum width of 20 nm. The external quantum efficiency (EQE) of MC-LED was constant at 0.8% for a forward current from 0.5 to 2 mA with the emitting area of 30×30 µm2. With increasing forward current, the peak wavelength and spectrum width of the emission showed almost no changes. For epitaxial growth, metal-organic chemical vapor deposition (MOCVD) was used. Substrate removal and tunnel-junction with an Ag-based electrode made possible the fabrication of the ultra-short 200 nm thick cavity MC-LED. This is more than a factor of 2 improvement compared to previous MC-LEDs of 450 nm cavity thickness sustaining 5 modes.

Universality of fold-encoded localized vibrations in enzymes.

Enzymes speed up biochemical reactions at the core of life by as much as 15 orders of magnitude. Yet, despite considerable advances, the fine dynamical determinants at the microscopic level of their catalytic proficiency are still elusive. In this work, we use a powerful mathematical approach to show that rate-promoting vibrations in the picosecond range, specifically encoded in the 3D protein structure, are localized vibrations optimally coupled to the chemical reaction coordinates at the active site. Remarkably, our theory also exposes an hithertho unknown deep connection between the unique localization fingerprint and a distinct partition of the 3D fold into independent, foldspanning subdomains that govern long-range communication. The universality of these features is demonstrated on a pool of more than 900 enzyme structures, comprising a total of more than 10,000 experimentally annotated catalytic sites. Our theory provides a unified microscopic rationale for the subtle structure-dynamics-function link in proteins.

Prospects for 100% wall-plug efficient III-nitride LEDs.

The possibility of a III-nitride LED with 100% or greater wall-plug efficiency is examined considering recent observations of the phenomenon for smaller bandgap mid-IR LEDs under extremely low-bias operation [Phys. Rev. Lett. 108, 1 (2012)]. Thermoelectric pumping of carriers by lattice heat enables ≥ 100% WPE, but this effect is relatively weaker for the wider band gap III-nitrides. This work assesses the electrical and optical performance of several state-of-the-art nitride devices and summarizes the requirements and prospects for approaching ≥ 100% WPE for III-nitride LEDs operating at technologically relevant current densities (> 1 A/cm2).

Stable, Heat-Conducting Phosphor Composites for High-Power Laser Lighting.

Solid-state lighting using laser diodes is an exciting new development that requires new phosphor geometries to handle the greater light fluxes involved. The greater flux from the source results in more conversion and therefore more conversion loss in the phosphor, which generates self-heating, surpassing the stability of current encapsulation strategies used for light-emitting diodes, usually based on silicones. Here, we present a rapid method using spark plasma sintering (SPS) for preparing ceramic phosphor composites of the canonical yellow-emitting phosphor Ce-doped yttrium aluminum garnet (Ce:YAG) combined with a chemically compatible and thermally stable oxide, α-Al2O3. SPS allows for compositional modulation, and phase fraction, microstructure, and luminescent properties of ceramic composites with varying compositions are studied here in detail. The relationship between density, thermal conductivity, and temperature rise during laser-driven phosphor conversion is elucidated, showing that only modest densities are required to mitigate thermal quenching in phosphor composites. Additionally, the scattering nature of the ceramic composites makes them ideal candidates for laser-driven white lighting in reflection mode, where Lambertian scattering of blue light offers great color uniformity, and a luminous flux >1000 lm is generated using a single commercial laser diode coupled to a single phosphor element.

High wall-plug efficiency blue III-nitride LEDs designed for low current density operation.

Commercial LEDs for solid-state lighting are often designed for operation at current densities in the droop regime (~35 A/cm2) to minimize costly chip area; however, many benefits can be realized by operating at low current density (J ≈1 - 5 A/cm2). Along with mitigation of droop losses and reduction of the operating voltage, low J operation of LEDs opens the design space for high light extraction efficiency (LEE). This work presents detailed ray tracing simulations of an LED design for low J operation with LEE ≈94%. The design is realized experimentally resulting in a peak wall-plug efficiency of 78.1% occurring at 3.45 A/cm2 and producing an output power of 7.2 mW for a 0.1 mm2 emitting area. At this operation point, the photon voltage Vp=hνq exceeds the forward voltage (V), corresponding to a Vp/V = 103%.

Direct measurement of Auger electrons emitted from a semiconductor light-emitting diode under electrical injection: identification of the dominant mechanism for efficiency droop.

We report on the unambiguous detection of Auger electrons by electron emission spectroscopy from a cesiated InGaN/GaN light-emitting diode under electrical injection. Electron emission spectra were measured as a function of the current injected in the device. The appearance of high energy electron peaks simultaneously with an observed drop in electroluminescence efficiency shows that hot carriers are being generated in the active region (InGaN quantum wells) by an Auger process. A linear correlation was measured between the high energy emitted electron current and the "droop current"--the missing component of the injected current for light emission. We conclude that the droop phenomenon in GaN light-emitting diodes originates from the excitation of Auger processes.

Photonic crystal light-emitting sources.

Photonic crystals (PhCs) are periodically structured optical media offering the opportunity for spontaneous emission (SpE) to be strongly controlled in spatial terms (directions) or in absolute terms (rates). We discuss the application of this concept for practical light-emitting sources, summarizing the principles and actual merits of various approaches based on two- and three-dimensional PhCs. We take into consideration the numerous constraints on real-world light-emitting structures and materials. The various mechanisms through which modified photonic bands and band gaps can be used are first revisited in view of their use in light sources. We then present an in-depth discussion of planar emitters and enhanced extraction of light thanks to grating diffraction. Applications to conventional III-V semiconductors and to III-nitrides are reviewed. Comparison with random surface roughening reveals some common physical limitations. Some advanced approaches with complex structures or etched active structures are also discussed. Finally, the most promising mechanism to enhance the SpE rate, the Purcell effect, is considered. Its implementation, including through plasmonic effects, is shown to be effective only for very specific sources. We conclude by outlining the mix of physics and material parameters needed to grasp the relevant issues.

Photonic crystal patterning of luminescent sol-gel films for light extraction.

Structured luminescent thin films are investigated in the context of improved light extraction of phosphors for solid-state-lighting applications. Thin films composed of a sol-gel titania matrix doped with europium chelates are studied as a model system. These films, patterned with a square photonic lattice by soft nanoimprint lithography, are characterized by angle-resolved fluorescence. Modeling of this simple technique is shown to fit well the experimental data, revealing in great detail the guided modes of the film and their extraction parameters. An eightfold extraction enhancement factor of the film emission is measured. To further improve the extraction efficiency, we investigate the role of an additional low-index mesoporous silica underlayer through its influence on the guided modes of different polarizations and their interactions with the photonic crystal. Results obtained on model systems open the way towards the optimization of light-emitting devices, using a strategy of dielectric microstructure engineering using the sol-gel process.

Quantitative analysis of enhanced light irradiance in waveguide-based fluorescent microarrays.

Probing microarray assays in the presence of a hybridization mix retrieves precious information on hybridization kinetics. However, in common detection schemes, useful surface signals compete with the high supernatant background from labelled targets in the mix. A known solution consists in exciting specifically the microarray surface with evanescent fields. Configurations using planar optical waveguides to produce such fields are shown here to present also a dramatic excitation irradiance enhancement at the guide/surrounding matter interface. We compare theoretically and experimentally a guided excitation with a classical external excitation. A full electromagnetic analysis predicts an irradiance increase higher than 10(4) for adequately tailored waveguides. We deposited high-index TiO(2) sol-gel waveguides on glass substrates according to best simulations. Quantitative enhancement analysis exploiting actual biological fluorescent spots perfectly confirms the irradiance amplification effect of a thin waveguide. The impact of amplification on the design of biochip readers is discussed since it leaves ample margin for simple and low-cost light couplers, advantageous in affordable readers and sensor systems.

Innovative integrated system for real-time measurement of hybridization and melting on standard format microarrays.

Despite the great popularity and potential of microarrays, their use for research and clinical applications is still hampered by lengthy and costly design and optimization processes, mainly because the technology relies on the end point measurement of hybridization. Thus, the ability to monitor many hybridization events on a standard microarray slide in real time would greatly expand the use and benefit of this technology, as it would give access to better prediction of probe performance and improved optimization of hybridization parameters. Although real-time hybridization and thermal denaturation measurements have been reported, a complete walk-away system compatible with the standard format of microarrays is still unavailable. To address this issue, we have designed a biochip tool that combines a hybridization station with active mixing capability and temperature control together with a fluorescence reader in a single compact benchtop instrument. This integrated live hybridization machine (LHM) allows measuring in real time the hybridization of target DNA to thousands of probes simultaneously and provides excellent levels of detection and superior sequence discrimination. Here we show on an environmental single nucleotide polymorphism (SNP) model system that the LHM enables a variety of experiments unachievable with conventional biochip tools.

Spontaneous emission in GaN/InGaN photonic crystal nanopillars.

We investigate the physics of spontaneous emission in a photonic crystal (PhC) made of GaN rods with embedded InGaN quantum wells, formed on a thick GaN layer. Although the PhC lies on a higher-index medium, we evidence the existence of unexpected quasi-guided Bloch modes which are strongly localized in the PhC region and possess a long lifetime. These modes determine the behavior of spontaneous emission such as the emission diagram and Purcell effect, as would happen in the usual case of emission in a PhC membrane.

Photonic crystal-assisted light extraction from a colloidal quantum dot/GaN hybrid structure.

We present a study of the light extraction from CdSe/ZnS core/shell colloidal quantum dot thin films deposited on quantum well InGaN/GaN photonic crystal structures. The two-dimensional photonic crystal defined by nanoimprint lithography is used to efficiently extract the guided light modes originating from both the quantum dot thin films and the InGaN quantum wells. Far-field photoluminescence spectra are used to measure the extraction enhancement factor of the quantum dot emission (x1.4). Microphotoluminescence measurements show that the guided mode effective extraction lengths range between 70 and 180 microm, depending on the wavelength of light.