ABSTRACT
This research reports on the physical and mechanical effects of various filler materials used in direct ink write (DIW) 3-D printing resins. The data reported herein supports interpretation and discussion provided in the research article "Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers" [1]. The datasheet describes the model structures and the interaction energies between the fillers and the other components by using Molecular Dynamics (MD) simulations. This report includes mechanical responses of single-cubic (SC) and face-centered tetragonal (FCT) structures printed using new DIW resin formulations (polydimethylsiloxane-based silicones filled with aluminum oxide, graphite, or titanium dioxide). Using MD simulations and mechanical data, the overall flexibility and interactions between resin components are fully characterized.
ABSTRACT
Although several other neutron rheometers have been built to study soft matter under nonequilibrium conditions, none of them have the ability to measure the structure and behavior of the polymeric interfacial regions in highly viscous polymer melts which require high torques/high strain rates and high temperatures. A neutron rheometer in the cone and plate geometry has been constructed at the Los Alamos Neutron Science Center to rectify this lack of experimental instrumentation. It is also the first-of-its-kind to perform neutron reflectivity studies concurrently with rheological measurements. The details of both the development and testing of the Los Alamos Neutron Science Center neutron rheometer in the cone and plate configuration are described. Proof of principle neutron reflectivity results of end-grafted polystyrene against an identical melt under shear are presented, showing qualitatively that the structural attributes of the end-grafted polymer change when exposed to shear.
ABSTRACT
A neutron rheometer in the Couette geometry has been built at the Los Alamos Neutron Science Center to examine the molecular steady-state and dynamic responses of entangled polymeric materials in the bulk under the application of shear stress via small-angle neutron scattering. Although similar neutron rheometers have been fabricated elsewhere, this new design operates under the extreme conditions required for measuring the structure and behavior of high molecular weight polymer melts. Specifically, the rheometer achieves high torques (200 N m) and shear rates (865 s(-1)) simultaneously, never before attainable with other neutron rheometers at temperatures up to 240 degrees C under an inert gas environment. The design of the instrument is such that relatively small sample sizes are required. The testing of the Los Alamos Neutron Science Center Neutron Rheometer in the Couette design both as a rheometer and in the small-angle neutron optical configuration on highly viscous polystyrene is presented. The observed anisotropic neutron scattering pattern of the polystyrene melt at a molecular weight above entanglement provides evidence that the conformation of the polymer chains are elongated in the direction of the melt flow, in agreement with the current theories concerning linear polymers in the bulk.
ABSTRACT
We present a comprehensive numerical study of the effect of degree of polymerization, generation of dendron growth, length of dendron tether, and dendron grafting density on the conformational statistics of dendronized polymers. This class of supramolecular assembly promises to find application in a number of nanotechnological devices in which their dimensions and conformations are key. We find that the radius of gyration estimates obtained from Brownian dynamics simulations yield to a "Flory" scaling argument in the high degree of polymerization regime and that these data from a range of topologically distinct molecules collapse onto a single curve in this limit. The size of the tethered dendrons serve as the key parameter in the scaling theory. Close examination of the dendrons also reveals some curious trends. In particular, we observe that as the grafting density is increased, spatial packing constraints around the main chain backbone force the dendrons further away from the backbone and compress them, significantly affecting the spatial distribution and accessibility of terminal groups; in contrast to dendrimers, the terminal groups of these molecules display a tendency to partition near the surface at high dendron grafting densities.
Subject(s)
Crystallization/methods , Macromolecular Substances/chemistry , Models, Chemical , Models, Molecular , Nanostructures/chemistry , Polymers/chemistry , Computer Simulation , Molecular Conformation , Particle SizeABSTRACT
The mechanical dispersion technology used in this study employs rotor-stator mixers that produce water-continuous high internal phase emulsions (HIPEs) with narrow drop size distributions and small drop sizes, even when the internal phase (oil) viscosity is quite high. Analysis of these HIPEs reveals trends that are consistent with formation by a capillary instability mechanism in which a shear deformation produces highly elongated drops that rupture to form uniform, small droplets. In the search for a predictive tool to aid in the manufacture and use of HIPEs, rheology data for these shear-thinning HIPEs have been compared to data for models in the literature. Existing models do not correctly account for the effect of a high internal phase viscosity on the rheological properties of the HIPE. Another shortcoming is failure to correctly address the shear-thinning exponent. Whereas internal phase viscosity does not seem to affect the shear-thinning exponent, the surfactant apparently plays an important role, possibly through its modification of the interfacial tension and continuous phase rheology.
