Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 3 de 3
Filter
Add more filters











Database
Language
Publication year range
1.
Anal Chem ; 88(12): 6223-30, 2016 06 21.
Article in English | MEDLINE | ID: mdl-27240571

ABSTRACT

An optimized method is described for U/Pu separation and subsequent measurement of the amount contents of uranium isotopes by total evaporation (TE) TIMS with a double filament setup combined with filament carburization for age determination of plutonium samples. The use of carburized filaments improved the signal behavior for total evaporation TIMS measurements of uranium. Elevated uranium ion formation by passive heating during rhenium signal optimization at the start of the total evaporation measurement procedure was found to be a result from byproducts of the separation procedure deposited on the filament. This was avoided using carburized filaments. Hence, loss of sample before the actual TE data acquisition was prevented, and automated measurement sequences could be accomplished. Furthermore, separation of residual plutonium in the separated uranium fraction was achieved directly on the filament by use of the carburized filaments. Although the analytical approach was originally tailored to achieve reliable results only for the (238)Pu/(234)U, (239)Pu/(235)U, and (240)Pu/(236)U chronometers, the optimization of the procedure additionally allowed the use of the (242)Pu/(238)U isotope amount ratio as a highly sensitive indicator for residual uranium present in the sample, which is not of radiogenic origin. The sample preparation method described in this article has been successfully applied for the age determination of CRM NBS 947 and other sulfate and oxide plutonium samples.

2.
Anal Sci ; 24(2): 247-52, 2008 Feb.
Article in English | MEDLINE | ID: mdl-18270417

ABSTRACT

A stable solid spike for the measurement of uranium and plutonium content in nitric acid solutions of spent nuclear fuel by isotope dilution mass spectrometry has been prepared at the European Commission Institute for Reference Materials and Measurements in Belgium. The spike contains about 50 mg of uranium with a 19.838% (235)U enrichment and 2 mg of plutonium with a 97.766% (239)Pu abundance in each individual ampoule. The dried materials were covered with a thin film of cellulose acetate butyrate as a protective organic stabilizer to resist shocks encountered during transportation and to eliminate flaking-off during long-term storage. It was found that the cellulose acetate butyrate has good characteristics, maintaining a thin film for a long time, but readily dissolving on heating with nitric acid solution. The solid spike containing cellulose acetate butyrate was certified as a reference material with certified quantities: (235)U and (239)Pu amounts and uranium and plutonium amount ratios, and was validated by analyzing spent fuel dissolver solutions of the Tokai reprocessing plant in Japan. This paper describes the preparation, certification and validation of the solid spike coated with a cellulose derivative.

3.
Microsc Microanal ; 13(3): 156-64, 2007 Jun.
Article in English | MEDLINE | ID: mdl-17490497

ABSTRACT

Environmental sampling (ES) is a powerful technique used by safeguards inspectors of the International Atomic Energy Agency and the European Safeguards Office for the detection of undeclared nuclear activities. Since its implementation in the 1990s, ES has proven to be very sensitive and effective. Considering the consequences, the measurements should be carried out under a quality management programme. At the Institute for Reference Materials and Measurements, a new production method is under development for the preparation of reference uranium particles from well-certified UF6, allowing uranium particles with certified isotopic abundances to be prepared that are representative of those found in uranium enrichment facilities. Using an aerosol deposition chamber designed and built for the purpose, particles are formed by the hydrolysis of UF6 and their morphology and (isotopic) composition measured using SEM-EDX and SIMS. The SEM measurements show that by varying the relative humidity of the air in the reaction chamber, the morphology of the particles can be changed. By making a distribution map of the chemical composition of the particles, the relationship between fluorine and uranium as main constituents of the particle could be established. The presence of fluorine is a valuable indicator for the occurrence of nondeclared enrichment activities.

SELECTION OF CITATIONS
SEARCH DETAIL