Positronium Laser Cooling via the 1

We report on laser cooling of a large fraction of positronium (Ps) in free flight by strongly saturating the 1^{3}S-2^{3}P transition with a broadband, long-pulsed 243 nm alexandrite laser. The ground state Ps cloud is produced in a magnetic and electric field-free environment. We observe two different laser-induced effects. The first effect is an increase in the number of atoms in the ground state after the time Ps has spent in the long-lived 2^{3}P states. The second effect is one-dimensional Doppler cooling of Ps, reducing the cloud's temperature from 380(20) to 170(20) K. We demonstrate a 58(9)% increase in the fraction of Ps atoms with v_{1D}<3.7×10^{4} ms^{-1}.

The measurement of photocathode transverse energy distribution curves (TEDCs) using the transverse energy spread spectrometer (TESS) experimental system.

The minimum achievable particle beam emittance in an electron accelerator depends strongly on the intrinsic emittance of the photocathode electron source. This is measurable as the mean longitudinal and transverse energy spreads in the photoemitted electron beam (MLE and MTE respectively); consequently, MLE and MTE are notable figures of merit for photocathodes used as electron sources in particle accelerators. The overall energy spread is defined by the sum of the MTE and the MLE, and the minimization of MTE is crucial to reduce emittance and thus generate a high-brightness electron beam. Reducing the electron beam emittance in an accelerator that drives a Free-Electron Laser (FEL) delivers a significant reduction in the saturation length for an x-ray FEL, thus reducing the machine's construction footprint and operating costs while increasing the x-ray beam brightness. The ability to measure the transverse energy distribution curve of photoelectrons emitted from a photocathode is a key enabler in photocathode research and development that has prompted the Accelerator Science and Technology Centre (ASTeC) at the STFC Daresbury Laboratory to develop the Transverse Energy Spread Spectrometer to make these crucial measurements. We present details of the design for the upgraded TESS instrument with measured data for copper (100), (110), and (111) single-crystal photocathodes illuminated at UV wavelengths around 266 nm.

Non-invasive beam profile monitor for medical accelerators.

A beam profile monitor based on a supersonic gas-curtain is currently under development for transverse profile diagnostics of electron and proton beams in the High Luminosity LHC. This monitor uses a thin supersonic gas curtain that crosses the primary beam to be characterized under an angle of 45 degrees. The fluorescence caused by the interaction between the beam and gas-curtain is detected using a specially designed imaging system to determine the 2D transverse profile of the primary beam. Another prototype monitor based on beam induced ionization is installed at The Cockcroft Institute. This paper presents the design features of both the monitors, the gas-jet curtain formation and various experimental tests, including profile measurements of an electron beam, using helium, nitrogen and neon as gases. Such a non-invasive online beam profile monitor would be highly desirable also for medical LINAC's and storage rings as it can characterize the beam without stopping machine operation. The paper discusses opportunities for simplifying the monitor design for integration into a medical accelerator and expected monitor performance.

A novel simulation and analysis algorithm for high resolution optical transition radiation imaging.

The use of optical transition radiation (OTR) for charged particle beam imaging is a well-established and commonly used technique. As such, simulations of the images expected from an arbitrary transverse beam profile are important in both the design of such OTR imaging systems and the analysis of the data. However OTR image simulations of high-energy, low-emittance particle beams, that are becoming commonplace within accelerator physics, can be extremely challenging to produce and limited in their account of practical factors. In this paper we systematically show how high-energy OTR image simulations can be carried out using low-energy parameters, whilst providing little deviation in the resulting transverse beam profiles. Simulations require significantly less resources and can be combined with further analysis techniques, which would otherwise be too costly to be practically viable. Using this methodology as a basis for OTR simulations, we present a new method of analyzing OTR transverse beam profile data for high-energy, low-emittance beams. In contrast to previous work, this algorithm includes the effects of a finite bandwidth and directly allows the inclusion of optical effects, such as chromatic aberration.

Measurement of the longitudinal energy distribution of electrons in low energy beams using electrostatic elements.

The Transverse Energy Spread Spectrometer (TESS) was designed primarily to study the mean transverse energy spread of electrons emitted from photocathode electron sources at both room and liquid nitrogen temperatures as a function of quantum efficiency through analysis of the photoemission footprint. By reconfiguring the potentials applied to different detector elements, TESS can also be used to measure the mean longitudinal energy spread of photoemitted electrons. Initial plans were to use electrostatic wire meshes as a retarding element which prevents the detection of electrons with insufficient energy to overcome a variable potential barrier. However, this method has proved impractical and a new method has been proposed in which the photocathode bias potential is swept (effectively from a state of no electron emission to full emission) and the emitted photocurrent is then detected by using a photoemitted charge collector. In this article, we present the TESS set-up and analyze this new method to measure the longitudinal energy distribution curve. Experimental results are presented and compared to simulated results by utilising a custom designed tracking code.

Dual-grating dielectric accelerators driven by a pulse-front-tilted laser.

This paper investigates numerically dual-grating dielectric laser-driven accelerators driven by a pulse-front-tilted (PFT) laser, which extends the interaction length and boosts the electrons' energy gain. The optical system necessary to generate PFT laser beams with an ultrashort pulse duration of 100 fs is also studied in detail. Through two-dimensional particle-in-cell simulations, we show that such a PFT laser effectively increases the energy gain by (91±25) % compared to that of a normally incident laser with a waist radius of 50 µm for a 100-period dual-grating structure.