ABSTRACT
High temperature asymmetrical flow field-flow fractionation (HTAF4) coupled to infrared (IR), multi-angle light scattering (MALS), and viscometry (Visc) detection is introduced as a tool for the characterization of high molecular weight polyethylenes. The high molecular weight fraction strongly affects the rheological behaviour and processability of polyethylene materials and can often not be accurately resolved by current technology such as high temperature size-exclusion chromatography (HTSEC). Molecular weight (M), radius of gyration (Rg), and intrinsic viscosity [eta] of linear high density polyethylene (HDPE) and branched low density polyethylene (LDPE) samples are studied in detail by HTAF4 and are compared to HTSEC. HTAF4 showed a better separation and mass recovery than HTSEC for very high molecular weight fractions in HDPE and LDPE samples. As no stationary phase is present in an HTAF4 channel, the technique does not show the typical drawbacks associated with HTSEC analysis of high molecular weight polyethylenes, such as, exclusion effects, shear degradation, and anomalous late elution of highly branched material. HTAF4 is applied to study the relation between the molecular weight and the zero shear viscosity eta0 for high molecular weight HDPE. It was found that the zero shear viscosity values predicted from HTAF4 results are in good qualitative agreement with measured values obtained from dynamic mechanical spectroscopy (DMS) experiments, whereas eta0 values predicted from HTSEC do not show a strong correlation. The low molecular weight cutoff of HTAF4 is approximately 5x10(4) as a result of relatively large pores in the HTAF4 channel membrane. HTAF4 is, therefore, currently not suited to analyze low molecular weight materials.
