Rapid Fabrication of High-Resolution Flexible Electronics via Nanoparticle Self-Assembly and Transfer Printing.

Printed electronic technology serves as a key component in flexible electronics and wearable devices, yet achieving compatibility with both high resolution and high efficiency remains a significant challenge. Here, we propose a rapid fabrication method of high-resolution nanoparticle microelectronics via self-assembly and transfer printing. The tension gradient-electrostatic attraction composite-induced nanoparticle self-assembly strategy is constructed, which can significantly enhance the self-assembly efficiency, stability, and coverage by leveraging the meniscus Marangoni effect and the electric double-layer effect. The close-packed nanoparticle self-assembly layer can be rapidly formed on microstructure surfaces over a large area. Inspired by ink printing, a transfer printing strategy is further proposed to transform the self-assembly layer into conformal micropatterns. Large-area, high-resolution (2 µm), and ultrathin (1 µm) nanoparticle microelectronics can be stably fabricated, yielding a significant improvement over fluid printing methods. The unique deformability, recoverability, and scalability of nanoparticle microelectronics are revealed, providing promising opportunities for various academic and real applications.

Analysis of the Pattern Shapes Obtained By Micro/Nanospherical Lens Photolithography.

Micro/nanospherical lens photolithography (SLPL) constitutes an efficient and precise micro/nanofabrication methodology. It offers advantages over traditional nanolithography approaches, such as cost-effectiveness and ease of implementation. By using micrometer-sized microspheres, SLPL enables the preparation of subwavelength scale features. This technique has gained attention due to its potential applications. However, the SLPL process has a notable limitation in that it mostly produces simple pattern shapes, mainly consisting of circular arrays. There has been a lack of theoretical analysis regarding the possible shapes that can be created. In our experiments, we successfully prepared annular and ring-with-hole pattern shapes. To address this limitation, we applied the Mie scattering theory to systematically analyze and summarize the various patterns that can be obtained through the SLPL process. We also proposed methods to predict and obtain different patterns. This theoretical analysis enhances the understanding of SLPL and expands its potential applications, making it a valuable area for further research.

Near-Infrared Light Responsive Surface with Switchable Wettability in Microstructure and Surface Chemistry.

Intelligent surfaces with reversibly switchable wettability have recently drawn considerable attention. One typical strategy to obtain such a surface is to change the surface chemistry or the microstructure. Herein, we report a new smart surface for which the wettability was controlled by both the surface chemistry and microstructure. Various wetting states were reversibly and precisely controlled through heating, pressing, NIR irradiation, and oxygen plasma treatment. The excellent shape memory characteristics of shape memory polyurethane (SMPU) and the controlled release of hydrophobic/hydrophilic oxygen-containing functional groups contributed to this ability. Microcapsules were used to design these smart surfaces. They controlled the release of a fluorinated alkyl silane (FAS) through shell melting, changed the surface composition, and played a decisive role in protecting the FAS against hydrolysis and evaporation to ensure that the surface's wettability is recyclable. Controlling of the surface chemistry or microstructure was repeated for at least 19 or 16 cycles, respectively, which indicated excellent repeatability compared to other smart surfaces. Based on the excellent controllability, the surface exhibited multiple functions, such as liquid directional transport and coefficient of friction control. In addition, it maintained this extraordinary ability under harsh environments owing to the great stability of the SMPU and adequate protection of the FAS by the microcapsules. With switchable wettability based on the surface chemistry and microstructure, this work provides a new principle for designing smart surfaces with wettability controlled in two ways.

High-Throughput and Efficient Intracellular Delivery Method via a Vibration-Assisted Nanoneedle/Microfluidic Composite System.

Intracellular delivery and genetic modification have brought a significant revolutionary to tumor immunotherapy, yet existing methods are still limited by low delivery efficiency, poor throughput, excessive cell damage, or unsuitability for suspension immune cells, specifically the natural killer cell, which is highly resistant to transfection. Here, we proposed a vibration-assisted nanoneedle/microfluidic composite system that uses large-area nanoneedles to rapidly puncture and detach the fast-moving suspension cells in the microchannel under vibration to achieve continuous high-throughput intracellular delivery. The nanoneedle arrays fabricated based on the large-area self-assembly technique and microchannels can maximize the delivery efficiency. Cas9 ribonucleoprotein complexes (Cas9/RNPs) can be delivered directly into cells due to the sufficient cellular membrane nanoperforation size; for difficult-to-transfect immune cells, the delivery efficiency can be up to 98%, while the cell viability remains at about 80%. Moreover, the throughput is demonstrated to maintain a mL/min level, which is significantly higher than that of conventional delivery techniques. Further, we prepared CD96 knockout NK-92 cells via this platform, and the gene-edited NK-92 cells possessed higher immunity by reversing exhaustion. The high-throughput, high-efficiency, and low-damage performance of our intracellular delivery strategy has great potential for cellular immunotherapy in clinical applications.

Replenishment of the Gas in a Hydrophobically-Structured Surface by Mass Transfer at the Liquid-Gas Interface for Improving the Stability of Entrapped Gas.

The underwater nonwetted state on a superhydrophobic surface is hardly maintained in flowing water because the entrapped gas dissolves into the water or is carried off by flow. Therefore, a source gas is necessary to maintain a superhydrophobic state for its applications under realistic conditions. As detailed in this paper, based on the gas entrapped on a hydrophobic structured surface, the gas regeneration was experimentally achieved to replenish the losses of gas carried off by the flowing and reduced through dissolution. Furthermore, the mechanism of mass transfer at the liquid-gas interface was investigated by simulation. The results indicated that water molecules at a liquid-gas interface should escape to entrapped gas when water content didn't reach saturation. This phenomenon could be due to the evaporation at the liquid-gas interface. With the increasing water content in the entrapped gas, the evaporation rate at the liquid-gas interface descended gradually. Under the action of flowing, the substances containing high concentrations of water molecule was washed away at the liquid-gas interface. Therefore, the low concentration of the water molecule at the liquid-gas interface was created. As a result, the equilibrium of water and gas at the liquid-gad interface was broken, and the evaporation continued to replenish the lost gas. Overall, the presented results in this study could be considered a promising candidate for replenishing the lost gas in hydrophobic structured surfaces by mass transfer at the liquid-gas interface.

Effect of Doping SiO2 Nanoparticles and Phenylmethyl Silicone Oil on the Large-Scale Deicing Property of PDMS Coatings.

Recently, low interfacial toughness (LIT) materials have been developed to solve large-scale deicing problems. According to the theory of interfacial fracture, ice detachment is dominated by strength-controlled or toughness-controlled regimes, which are characterized by adhesive strength or constant shear force. Here, a new strategy is introduced to regulate the interfacial toughness of poly(dimethylsiloxane) (PDMS) coatings using silicon dioxide nanoparticles (SiO2 NPs) and phenylmethyl silicone oil (PMSO). By systematically adjusting the doping proportion of SiO2 NPs and PMSO, it is found that a lower interfacial toughness can be achieved with a lower constant shear force. The synergistic effect of the two dopants on the adhesive strength and interfacial toughness is analyzed. Meanwhile, finite element method (FEM) analysis of ice detachment is conducted to show the cracking process intuitively and explicate the mechanism of lowering the interfacial toughness of PDMS by doping SiO2 NPs and PMSO. It can be concluded that the cohesive zone material (CZM) model is effective for simulating the deicing process of PDMS coatings and provides a comprehensive understanding of the modulation of interfacial toughness.

Analysis of drug efficacy for inflammatory skin on an organ-chip system.

Bacterial skin infections cause a variety of common skin diseases that require drugs that are safer than antibiotics and have fewer side effects. However, for evaluating skin disease drugs, human skin tissue in vitro constructed traditionally on Transwell has inefficient screening ability because of its fragile barrier function. With mechanical forces and dynamic flow, the organ-on-a-chip system became an innovative, automatic, and modular way to construct pathological models and analyze effective pharmaceutical ingredients in vitro. In this research, we integrated skin extracellular matrix and skin cells into a microfluidic chip to construct a biomimetic "interface-controlled-skin-on-chip" system (IC-SoC), which constructed a stable air-liquid interface (ALI) and necessary mechanical signals for the development of human skin equivalents. The results demonstrated that in the microfluidic system with a flowing microenvironment and ALI, the skin tissue formed in vitro could differentiate into more mature tissue morphological structures and improve barrier function. Then, following exposing the skin surface on the IC-SoC to the stimulation of Propionibacterium acnes (P.acnes) and SLS (sodium lauryl sulfate), the barrier function decreased, as well as inflammatory factors such as IL-1α, IL-8, and PEG2 increased in the medium channel of the IC-SoC. After this pathological skin model was treated with dexamethasone and polyphyllin H, the results showed that polyphyllin H had a significant repair effect on the skin barrier and a significant inhibition effect on the release of inflammation-related cytokines, and the effects were more prominent than dexamethasone. This automated microfluidic system delivers an efficient tissue model for toxicological applications and drug evaluation for bacterial-infected damaged skin instead of animals.

QiShenYiQi Pill Ameliorates Cardiac Fibrosis After Pressure Overload-Induced Cardiac Hypertrophy by Regulating FHL2 and the Macrophage RP S19/TGF-ß1 Signaling Pathway.

Purpose: Heart failure (HF) is a leading cause of morbidity and mortality worldwide, and it is characterized by cardiac hypertrophy and fibrosis. However, effective treatments are not available to block cardiac fibrosis after cardiac hypertrophy. The QiShenYiQi pill (QSYQ) is an effective treatment for chronic HF. However, the underlying mechanism remains unclear. Methods: In the present study, a pressure overload-induced cardiac hypertrophy model was established in rats by inducing ascending aortic stenosis for 4 weeks. QSYQ was administered for 6 weeks, and its effects on cardiac fibrosis, myocardial apoptosis, RP S19 release, macrophage polarization, TGF-ß1 production, and TGF-ß1/Smad signaling were analyzed. In vitro studies using H9C2, Raw264.7, and RDF cell models were performed to confirm the in vivo study findings and evaluate the contribution to the observed effects of the main ingredients of QSYQ, namely, astragaloside IV, notoginsenoside R1, 3,4-dihydroxyl-phenyl lactic acid, and Dalbergia odorifera T. C. Chen oil. The role of four-and-a-half LIM domains protein 2 (FHL2) in cardiac fibrosis and QSYQ's effects were assessed by small interfering RNAs (siRNAs). Results: QSYQ ameliorated cardiac fibrosis after pressure overload-induced cardiac hypertrophy and attenuated cardiomyocyte apoptosis, low FHL2 expression, and TGF-ß1 release by the injured myocardium. QSYQ also inhibited the following: release of RP S19 from the injured myocardium, activation of C5a receptors in monocytes, polarization of macrophages, and release of TGF-ß1. Moreover, QSYQ downregulated TGF-ßR-II expression induced by TGF-ß1 in fibroblasts and inhibited Smad protein activation and collagen release and deposition. Conclusion: The results showed that QSYQ inhibited myocardial fibrosis after pressure overload, which was mediated by RP S19-TGF-ß1 signaling and decreased FHL2, thus providing support for QSYQ as a promising therapy for blocking myocardial fibrosis.

Ameliorative effect and mechanism of Si-Ni-San on chronic stress-induced diarrhea-irritable bowel syndrome in rats.

Background: Chronic stress-induced diarrhea is a common clinical condition, characterized by an abnormal bowel movement and loose stools, which lacks effective treatment in the clinic. Si-Ni-San (SNS) is a compound traditional Chinese medicine extensively used in China for stress-related diarrhea. However, the mechanism is unclear. Methods: Male Wistar rats (200 ± 20 g) were placed in a restraint cylinder and fixed horizontally for 3 h once daily for 21 consecutive days to establish a chronic restraint stress (CRS) rat model. SNS (0.6944 g/kg or 1.3888 g/kg) was given by gavage 1 h before the restraint once daily for 21 consecutive days. We examined the fecal score, dopamine ß hydroxylase (DßH), and c-fos expression in locus coeruleus, norepinephrine (NE) content in ileum and plasma, expression of α1 adrenergic receptors, MLCK, MLC, and p-MLC in the colon and mesenteric arteries, contraction of isolated mesenteric arteries, The expression of subunit δ of ATP synthase (ATP5D) in intestinal tissues, ATP, ADP, and AMP content in the ileum and colon, occludin expression between ileum epithelial cells, the number of enterochromaffin cells (ECs) and mast cells (MCs) in the ileum, and 5-hydroxytryptamine (5-HT) content in the ileum and plasma. Results: After SNS treatment, the fecal score was improved. The increased expression of DßH and c-fos in locus coeruleus was inhibited. SNS suppressed the increased NE content in the ileum and plasma, down-regulated α1 adrenergic receptors in mesenteric arteries and MLCK, MLC, p-MLC in the colon and mesenteric arteries, and inhibited the contraction of mesenteric arteries. SNS also increased the ATP content in the ileum and colon, inhibited low expression of ATP5D in intestinal tissues, inhibited the decrease of ATP/ADP in the ileum and ATP/AMP in the colon, and up-regulated the occludin expression between ileum epithelial cells. In addition, SNS inhibited the increase of ECs and MCs in the ileum and the increase of 5-HT content in the ileum and plasma. Conclusion: This study demonstrated that SNS could improve CRS-induced abnormal feces in rats. This effect was related to the inhibition of CRS-induced increased expression of DßH and c-fos in the locus coeruleus, NE content in the ileum and plasma, and the contraction of isolated mesenteric arteries; inhibition of energy metabolism abnormality and decreased occludin expression; inhibition of increased ECs and MCs in the ileum, and 5-HT content in the ileum and plasma.

An Injectable Multifunctional Dual-Phase Bead-Reinforced Gelatin Matrix Permissive of Mesenchymal Stem Cell Infiltration for Musculoskeletal Soft Tissue Repair.

This study develops a novel strategy for regenerative therapy of musculoskeletal soft tissue defects using a dual-phase multifunctional injectable gelatin-hydroxyphenyl propionic acid (Gtn-HPA) composite. The dual-phase gel consists of stiff, degradation-resistant, ≈2-mm diameter spherical beads made from 8 wt% Gtn-HPA in a 2 wt% Gtn-HPA matrix. The results of a 3D migration assay show that both the cell number and migration distance in the dual-phase gel system are comparable with the 2 wt% mono-phase Gtn-HPA, but notably significantly higher than for 8 wt% mono-phase Gtn-HPA (into which few cells migrated). The results also show that the dual phase gel system has degradation resistance and a prolonged growth factor release profile comparable with 8 wt% mono-phase Gtn-HPA. In addition, the compressive modulus of the 2 wt% dual-phase gel system incorporating the 8 wt% bead phase is nearly four-fold higher than the 2 wt% mono-phase gel (5.3 ± 0.4 kPa versus 1.5 ± 0.06 kPa). This novel injectable dual-phase Gtn-HPA composite thus combines the advantages of low-concentration Gtn-HPA (cell migration) with high-concentration Gtn-HPA (stiffness, degradation resistance, slower chemical release kinetics) to facilitate effective reparative/regenerative processes in musculoskeletal soft tissue.

3D Printing of In Vitro Hydrogel Microcarriers by Alternating Viscous-Inertial Force Jetting.

Microcarriers are beads with a diameter of 60-250 µm and a large specific surface area, which are commonly used as carriers for large-scale cell cultures. Microcarrier culture technology has become one of the main techniques in cytological research and is commonly used in the field of large-scale cell expansion. Microcarriers have also been shown to play an increasingly important role in in vitro tissue engineering construction and clinical drug screening. Current methods for preparing microcarriers include microfluidic chips and inkjet printing, which often rely on complex flow channel design, an incompatible two-phase interface, and a fixed nozzle shape. These methods face the challenges of complex nozzle processing, inconvenient nozzle changes, and excessive extrusion forces when applied to multiple bioink. In this study, a 3D printing technique, called alternating viscous-inertial force jetting, was applied to enable the construction of hydrogel microcarriers with a diameter of 100-300 µm. Cells were subsequently seeded on microcarriers to form tissue engineering modules. Compared to existing methods, this method offers a free nozzle tip diameter, flexible nozzle switching, free control of printing parameters, and mild printing conditions for a wide range of bioactive materials.

A Highly Automated Mobile Laboratory for On-site Molecular Diagnostics in the COVID-19 Pandemic.

BACKGROUND: Infectious disease outbreaks such as the COVID-19 (coronavirus disease 2019) pandemic call for rapid response and complete screening of the suspected community population to identify potential carriers of pathogens. Central laboratories rely on time-consuming sample collection methods that are rarely available in resource-limited settings. METHODS: We present a highly automated and fully integrated mobile laboratory for fast deployment in response to infectious disease outbreaks. The mobile laboratory was equipped with a 6-axis robot arm for automated oropharyngeal swab specimen collection; virus in the collected specimen was inactivated rapidly using an infrared heating module. Nucleic acid extraction and nested isothermal amplification were performed by a "sample in, answer out" laboratory-on-a-chip system, and the result was automatically reported by the onboard information platform. Each module was evaluated using pseudovirus or clinical samples. RESULTS: The mobile laboratory was stand-alone and self-sustaining and capable of on-site specimen collection, inactivation, analysis, and reporting. The automated sampling robot arm achieved sampling efficiency comparable to manual collection. The collected samples were inactivated in as short as 12 min with efficiency comparable to a water bath without damage to nucleic acid integrity. The limit of detection of the integrated microfluidic nucleic acid analyzer reached 150 copies/mL within 45 min. Clinical evaluation of the onboard microfluidic nucleic acid analyzer demonstrated good consistency with reverse transcription quantitative PCR with a κ coefficient of 0.979. CONCLUSIONS: The mobile laboratory provides a promising solution for fast deployment of medical diagnostic resources at critical junctions of infectious disease outbreaks and facilitates local containment of SARS-CoV-2 (severe acute respiratory syndrome coronavirus 2) transmission.

Tension gradient-driven oil/water interface rapid particle self-assembly and its application in microdroplet motion control.

HYPOTHESIS: A binary mixture was used during injection with one water-miscible component and the other water-immiscible, which can help particles to migrate toward and then self-assemble at the interface. EXPERIMENTS: The ethanol-tetrachloromethane binary mixture was used to verify the self-assembly method, with the diameter of droplets being about 1 mm. As the ethanol diffused into the colloidal solution, the colloidal particles efficiently moved towards and self-assembled on the oil/water interface, while a colloidal particle film with high-coverage was able to rapidly form on the droplet surface even in an ultra-low concentration colloidal solution. The effects of ethanol concentration and particle concentration on self-assembly were investigated. FINDINGS: The driving force for self-assembly originated from the tension gradient generated by ethanol's concentration gradient at the particle/liquid interfaces, where the concentrations of ethanol and the colloidal solution had significant effects on self-assembly. The simulation and calculations results aligned well with experiments, providing the theoretical basis for this self-assembly method. Further, as-prepared magnetic particle-coated droplets transformed into a non-wetting soft solid, which had long lifetimes and could be precisely moved, coalesced, and transferred in various two-dimensional and three-dimensional liquid environments. Thus, wider applications are facilitated, such as droplet transfer, microreactor and other potential fields.

Simulation Study on the Dynamic Behaviors of Water-in-Oil Emulsified Droplets on Coalescing Fibers.

Although increasing superwetting membranes have been developed for separating oil-water emulsions based on the "size-sieving" mechanism, their pores are easily blocked and fouled by the intercepted emulsified droplets, which would result in a severe membrane fouling issue and a sharp decline in flux. Instead of droplet interception, a fiber-based coalescer separates oil/water emulsions by inducing the emulsified droplets to coalesce and transform into layered oil/water mixtures, exhibiting an ability to work continuously for a long time with high throughput, which makes it a promising technology for emulsion treatment. However, the underlying mechanism of the separation process is not well understood, which makes it difficult to further improve the separation performance. Hence, in this work, the dynamic behaviors of water-in-oil emulsified droplets on the surface of the coalescing fiber were numerically investigated based on the phase-field model. The attachment, transport, and detachment behaviors of droplets on fibers were directly observed, and the effects of fiber wettability, orientation, arrangement, and fluid speed were studied in detail. First, it was observed that the droplets will move downstream along the fiber surface under the effect of fluid shear, and the large droplets tend to coalesce with their downstream small droplets on the same fiber surface because they move faster compared to the small droplets. Second, it was found that the emulsified droplet will spontaneously transport to the intersection of two angled fibers under the drive of asymmetric Laplace pressure, which demonstrated that the emulsified droplets tend to gather at the intersection of fibers when permeating through a coalescing medium. Third, it was found that the detachment behaviors of droplets from the fiber surface are strongly affected by their size, fiber wettability, and fluid velocity. In addition, the results of our simulation show that the backside of two closely attached fibers can further inhibit the detachment of droplets. We truly believe that our research results are of significance to optimize the parameters of a fiber-based coalescer for separating oil-water emulsions and to develop novel oil/water separators.

Under-oil superhydrophilic salt particle filter for the efficient separation of water-in-oil emulsions.

In this study, a surfactant stabilized water-in-oil emulsion has been successfully separated by using only NaCl particles as a filter. This novel strategy is suitable for continuous filtration of a large quantity of water-in-oil emulsion with a volume of up to 1500 mL. Moreover, a filtration flux of up to 40 000 L m-2 h-1 is reported, which is around ten times higher than the conventional filtration methods.

Underoil Superhydrophilic Metal Felt Fabricated by Modifying Ultrathin Fumed Silica Coatings for the Separation of Water-in-Oil Emulsions.

Although various superhydrophobic/superoleophilic porous materials have been developed and successfully applied to separate water-in-oil emulsions through the size-sieving mechanism, the separation performance is restricted by their nanoscale pore size severely. In this study, the wettability of underoil water on fumed silica was experimentally observed, and the underlying mechanism was investigated by carrying out theoretical analysis and molecular dynamic (MD) simulations. Further, we present a novel, facile, and an inexpensive technique to fabricate an underoil superhydrophilic metal felt with microscale pores for the separation of water-in-oil emulsions using SiO2 nanoparticles (NPs) as building blocks. The as-prepared underoil superhydrophilic coating is closed-packed and ultrathin (the thickness is approximately hundreds of nanometers), as well as capable of being coated on a metal felt with complex structures without blocking its pores. The as-prepared metal felt could adsorb water droplets directly from oil, which endowed it with the ability to separate both surfactant-free and surfactant-stabilized water-in-oil emulsions with high separation efficiency up to 99.7% even though its pore size is larger than that of the emulsified droplet. The filtration flux for the separation of span 80-stabilized emulsion is up to ∼4000 L·m-2·h-1. Its separation performance is better than most of the other traditional membranes and superwettable materials used for the separation of water-in-oil emulsions. Moreover, the as-prepared metal felt retained outstanding separation performance even after 30 cycles of use, which demonstrated its excellent reusability and durability. Additionally, the distinctive wettability of underoil superhydrophilicity endued coated metal felt with superior antifouling properties toward crude oil. Overall, this study not only provides a new perspective on separating water-in-oil emulsions but also gives a universal approach to develop unique wettability surfaces.

Design, modeling and 3D printing of a personalized cervix tissue implant with protein release function.

Cervical cancer induced by human papillomavirus (HPV) causes severe morbidity worldwide. Although cervical conization has been widely accepted as the most conventional surgery against cervical cancer, tissue defects and high recurrence rates have a significant negative impact on women's mental and physical health. Herein we developed an implantable, personalized cervical implant with drug release function using 3D printing technology. The cervical implant was designed in cone-shape with hieratical porous structures according to the clinical data, 3D-printed using polyurethane by low-temperature deposition manufacturing (LDM), and finished by lyophilization. Anti-HPV protein was loaded into the porous structure under negative pressure afterwards. Elastic biomedical polyurethane and the porous structure ensured that these cervical implants were equipped with tailored mechanical properties comparable to physiological cervix tissue. Cytotoxicity and cytocompatibility tests indicated that these 3D-printed cervical implants supported cell adhesion and growth. More importantly, the cervical implants with regulated pores could help to quantitatively control the loading and release of anti-HPV protein to inhibit dissociative viruses near the cervix validly. As a result, the 3D-printed cervical implants in the present study showed considerable potential for use as functional tissue implants against HPV infection after cervical conization.

Spontaneous propulsion of a water nanodroplet induced by a wettability gradient: a molecular dynamics simulation study.

The directional propulsion of liquid droplets at the nanoscale is quite an interesting topic of research in the fields of micro/nano-fluidics, water filtration, precision medicine, and cooling of electronics. In this study, the unidirectional spontaneous transport of a water nanodroplet on a solid surface with a multi-gradient surface (MGS) inspired by natural species is modeled and analyzed using molecular dynamics (MD) simulations. There are three different MGSs considered in this study containing different wedge angles of the hydrophilic region of the solid surface. The MGSs contain two regions: a hydrophilic wedge-shaped region with a constant surface energy parameter equal to 50 meV and a hydrophobic region with a tuned surface energy parameter. The energy parameter of the hydrophobic region is set equal to 1, 5, 10, 20, 30, and 40 meV in order to alter the intensity of the wettability gradient of the two surfaces and its effect on the propulsion of the water nanodroplet is analyzed. Furthermore, three different sizes of water droplets containing 6000, 8000, and 10 000 water molecules are also used in this study and their effect on the transport behavior of the water nanodroplet is also measured. Moreover, two different designs on a solid surface with a continuous wettability gradient are modelled and the impact of solid surface geometry on the transport of the water droplet is calculated by means of mean square displacement (MSD) and average velocity data. In addition, the wedge-shaped surface is found to be more superior to the parallel-shaped surface for the spontaneous propulsion of the water droplet.

Hydrogel-Based Therapy for Brain Repair After Intracerebral Hemorrhage.

We assessed an injectable gelatin hydrogel containing epidermal growth factor (Gtn-EGF) as a therapy for intracerebral hemorrhage (ICH). ICH was induced in rats via collagenase injection into the striatum. Two weeks later, Gtn-EGF was injected into the cavitary lesion. The hydrogel filled ICH cavities without deforming brain tissue. Immunostaining demonstrated that neural precursor cells could migrate into the matrix, and some of these differentiated into neurons along with the appearance of astrocytes, oligodendrocytes, and endothelial cells. Sensorimotor tests suggested that Gtn-EGF improved neurological recovery. This study provides proof-of-principle that injectable biomaterials may be a translationally relevant approach for treating ICH.

Life-Like Motion of Oil Drops at the Air-Liquid Interface.

Generally, interactions of oil drops at the air-liquid interface mainly have two features, namely, attraction and repulsion. However, in our study, we find that the oil drops at the air-liquid interface have other interacting features, that is, the atomic-like motion and the "capture" motion. For the atomic-like motion, oil drops attract each other at a long distance, but repel when they are about to come into contact with each other. For the "capture" motion, a big oil drop can actively "capture" oil droplets like a zooplankton. In our research, we analyze interfacial forces among the oil drops. Based on the experiments and analyses, we demonstrate that the atomic-like motion of oil drops is mainly due to the lateral capillary force and the surface tension force, and the "capture" motion is mainly due to the unbalanced impact force of flow fluid around the drops. In addition, based on our results, we use the oil drops to perform many functions at the air-liquid interface. For example, the oil drops can drive an object with linear and rotational motion. When a carbon tetrachloride drop is suspended above the air-liquid interface, it can be used to control an oil droplet to pass through serpentine grooves and obstacles. In addition, the suspended carbon tetrachloride drops also can be used to rank multiple droplets with a special shape. Based on the results, our study makes it possible to use oil drops to transport materials, drive objects, and even collect droplets at the air-liquid interface.