Entomological assessment of hessian fabric transfluthrin vapour emanators for protecting against outdoor-biting Aedes aegypti in coastal Tanzania.

BACKGROUND: A low technology emanator device for slowly releasing vapour of the volatile pyrethroid transfluthrin was recently developed in Tanzania that provides robust protection against night biting Anopheles and Culex vectors of malaria and filariasis for several months. Here these same emanator devices were assessed in Dar es Salaam city, as a means of protection against outdoor-biting Aedes (Stegomia) aegypti, the most important vector of human arboviruses worldwide, in parallel with similar studies in Haiti and Brazil. METHODS: A series of entomological experiments were conducted under field and semi-field conditions, to evaluate whether transfluthrin emanators protect against wild Ae. aegypti, and also compare the transfluthrin responsiveness of Ae. aegypti originating from wild-caught eggs to established pyrethroid-susceptible Ae. aegypti and Anopheles gambiae colonies. Preliminary measurements of transfluthrin vapour concentration in air samples collected near treated emanators were conducted by gas chromatography-mass spectrometry. RESULTS: Two full field experiments with four different emanator designs and three different transfluthrin formulations consistently indicated negligible reduction of human landing rates by wild Ae. aegypti. Under semi-field conditions in large cages, 50 to 60% reductions of landing rates were observed, regardless of which transfluthrin dose, capture method, emanator placement position, or source of mosquitoes (mildly pyrethroid resistant wild caught Ae. aegypti or pyrethroid-susceptible colonies of Ae. aegypti and An. gambiae) was used. Air samples collected immediately downwind from an emanator treated with the highest transfluthrin dose (15g), contained 12 to 19 µg/m3 transfluthrin vapour. CONCLUSIONS: It appears unlikely that the moderate levels of pyrethroid resistance observed in wild Ae. aegypti can explain the modest-to-undetectable levels of protection exhibited. While potential inhalation exposure could be of concern for the highest (15g) dose evaluated, 3g of transfluthrin appears sufficient to achieve the modest levels of protection that were demonstrated entomologically. While the generally low levels of protection against Aedes reported here from Tanzania, and from similar entomological studies in Haiti and Brazil, are discouraging, complementary social science studies in Haiti and Brazil suggest end-users perceive valuable levels of protection against mosquitoes. It therefore remains unclear whether transfluthrin emanators have potential for protecting against Aedes vectors of important human arboviruses.

Recent advances in the stabilization of monomeric stibinidene chalcogenides and stibine chalcogenides.

The elucidation of novel bonding situations at heavy p-block elements has greatly advanced recent efforts to access useful reactivity at earth-abundant main-group elements. Molecules with unsaturated bonds between heavier, electropositive elements and lighter, electronegative elements are often highly polarized and competent in small-molecule activations, but the reactivity of these molecules may be quenched by self-association of monomers to form oligomeric species where the polar, unsaturated groups are assembled in a head-to-tail fashion. In this Frontier, we discuss the synthetic strategies employed to isolate monomeric σ2,λ3-stibinidene chalcogenides (RSbCh) and monomeric σ4,λ5-stibine chalcogenides (R3SbCh). These classes of molecules each feature polarized antimony-chalcogenide bonds (Sb = Ch/Sb+-Ch-). We highlight how the synthesis and isolation of these molecules has led to the discovery of novel reactivity and has shed light on fundamental aspects of inorganic structure and bonding. Despite these advances, there are critical aspects of this chemistry that remain underdeveloped and we provide our perspective on yet-unrealized synthetic targets that may be achieved with the continued development of the strategies described herein.

Silver 2,4'-Bipyridine Coordination Polymer for the High-Capacity Trapping of Perrhenate, A Pertechnetate Surrogate.

Pertechnetate, the most stable form of the radionuclide 99Tc in aerobic aqueous systems, is a hazardous anion present in nuclear waste. Its high mobility in water makes the remediation of the anion challenging. In the past decade, significant effort has been placed into finding materials capable of adsorbing this species. Here, we present the synthesis and high-resolution crystal structure of the coordination polymer [Ag(2,4'-bipyridine)]NO3, which is capable of sequestering perrhenate─a pertechnetate surrogate─through anion exchange to form another new coordination polymer, [Ag(2,4'-bipyridine)]ReO4. Both the beginning and end structures were solved by single-crystal X-ray diffraction and the adsorption reaction was monitored through inductively coupled plasma-optical emission spectroscopy and UV-vis spectroscopy. The exchange reaction follows a pseudo-second-order mechanism and the maximum adsorption capacity is 764 mg ReO4/g [Ag(2,4'-bipyridine)]NO3, one of the highest recorded for a coordination polymer or metal-organic framework. A solvent-mediated recrystallization mechanism was determined by monitoring the ion-exchange reaction by scanning electron microscopy-energy-dispersive spectroscopy and powder X-ray diffraction.

Variation in pnictogen-oxygen bonding unlocks greatly enhanced Brønsted basicity for the monomeric stibine oxide.

Phosphine oxides and arsine oxides feature highly polarized pnictoryl groups (Pn+-O-/Pn = O; Pn = P, As) and react as Brønsted bases through O-centered lone pairs. We recently reported the first example of a monomeric stibine oxide, Dipp3SbO (Dipp = diisopropylphenyl), allowing periodic trends in pnictoryl bonding to be extended to antimony for the first time. Computational studies suggest that, as the pnictogen atom becomes heavier, delocalization of electron density from the O-centered lone pairs to the Pn-C σ* orbitals is attenuated, destabilizing the lone pairs and increasing the donor capacity of the pnictine oxide. Herein, we assess the Brønsted basicity of a series of monomeric pnictine oxides (Dipp3PnO; Pn = P, As, and Sb). Stoichiometric reactivity between Dipp3PnO and a series of acids demonstrates the greatly enhanced ability of Dipp3SbO to accept protons relative to the lighter congeners, consistent with theoretical isodesmic reaction enthalpies and proton affinities. 1H NMR spectrometric titrations allow for the pKaH,MeCN determination of Dipp3AsO and Dipp3SbO, revealing a 106-fold increase in Brønsted basicity from Dipp3AsO to Dipp3SbO. The increased basicity can be exploited in catalysis; Dipp3SbO exhibits dramatically increased catalytic efficiency in the Brønsted base-catalyzed transesterification between p-nitrophenyl acetate and 2,2,2-trifluoroethanol. Our results unambiguously confirm the drastic increase in Brønsted basicity from Dipp3PO < Dipp3AsO < Dipp3SbO, a direct consequence of the variation in the electronic structure of the pnictoryl bond as the pnictogen atom increases in atomic number.

Isolation, bonding and reactivity of a monomeric stibine oxide.

In contrast to phosphine oxides and arsine oxides, which are common and exist as stable monomeric species featuring the corresponding pnictoryl functional group (Pn=O/Pn+-O-; Pn = P, As), stibine oxides are generally polymeric, and the properties of the unperturbed stiboryl group (Sb=O/Sb+-O-) remain unexplored. We now report the isolation of the monomeric stibine oxide, Dipp3SbO (where Dipp = 2,6-diisopropylphenyl). Spectroscopic, crystallographic and computational studies provide insight into the nature of the Sb=O/Sb+-O- bond. Moreover, isolation of Dipp3SbO allows the chemistry of the stiboryl group to be explored. Here we show that Dipp3SbO can act as a Brønsted base, a hydrogen-bond acceptor and a transition-metal ligand, in addition engaging in 1,2-addition, O-for-F2 exchange and O-atom transfer. In all cases, the reactivity of Dipp3SbO differed from that of the lighter congeners Dipp3AsO and Dipp3PO.

A new on-line SPE LC-HRMS method for the analysis of Perfluoroalkyl and Polyfluoroalkyl Substances (PFAS) in PM2.5 and its application for screening atmospheric particulates from Dublin and Enniscorthy, Ireland.

A sensitive analytical method has been developed and validated for the determination of 16 polyfluorinated alkyl substances (PFAS) in fine airborne particulate matter (PM2.5) using on-line solid phase extraction (SPE) coupled with liquid chromatography (LC) - negative electrospray ionisation high resolution mass spectrometry (-) ESI-HRMS. On-line SPE allows simultaneous sample clean-up from interfering matrices and lower limits of detection (LODs) by injecting a large volume of sample into the LC system without compromising chromatographic efficiency and resolution. The method provides LODs in the range 0.08-0.5 pg/mL of sample extract allowing detection of selected PFAS in aerosol particles at low fg/m3 level and showed good tolerance to the considered PM matrix. The validated method was applied for analysis of PFAS in ambient PM2.5 samples collected at two urban locations in Ireland, i.e., Enniscorthy and Dublin. Several PFAS were observed above the detection limit, including perfluorobutyrate (PFBA), perfluorooctanoic acid (PFOA), perfluorooctanesulfonic acid (PFOS), perfluorobutanesulfonic acid (L-PFBS) and perfluorononanoic acid (PFNA), as well as fluorotelomer sulfonates: 4:2 FTS, 6:2 FTS and 8:2 FTS. The results indicate that some toxic PFAS, such as PFOS and PFOA, are still detected in the environment despite being phased out from production and subject to restricted use in the EU and USA for more than two decades. Observation of fluorotelomer sulfonates (4:2 FTS, 6:2 FTS and 8:2 FTS, which are used as alternatives for legacy PFOA and PFOS) in ambient PM2.5 samples raises a concern about their persistence in the atmosphere and impact on human health considering emerging evidence that they could have similar health endpoints as PFOA and PFOS. To our knowledge, this is the first study to identify PFAS in ambient PM2.5 at urban locations in Ireland and also the first study to detect 4:2 and 8:2 fluorotelomer sulfonates in atmospheric aerosol particles.

Real-time Monitoring of Aerosol Generating Dental Procedures.

OBJECTIVE: We aimed to quantify aerosol concentrations produced during different dental procedures under different mitigation processes. METHOD: Aerosol concentrations were measured by the Optical Particle Sensor (OPS) and Wideband Integrated Bioaerosol Sensor (WIBS) during routine, time-recorded dental procedures on a manikin head in a partitioned enclosure. Four different, standardised dental procedures were repeated in triplicate for three different mitigation measures. RESULT: Both high-volume evacuation (HVE) and HVE plus local exhaust ventilation (LEV) eradicated all procedure-related aerosols, and the enclosure stopped procedure-related aerosols escaping. Aerosols recorded by the OPS and WIBS were 84 and 16-fold higher than background levels during tooth 16 FDI notation (UR6) drilling, and 11 and 24-fold higher during tooth 46 FDI notation (LR6) drilling, respectively. Ultrasonic scaling around the full lower arch (CL) or the full upper arch (CU) did not generate detectable aerosols with mitigation applied. Without mitigation the largest concentration of inhalable particles during procedures observed by the WIBS and OPS was during LR6 (139/cm3) and UR6 (28/cm3) drilling, respectively. Brief aerosol bursts were recorded during drilling procedures with HVE, these did not occur with LEV, suggesting LEV provides protection against operator errors. Variation was observed in necessary fallow times (49 - 280 minutes) without mitigation, while no particles remained airborne when mitigation was utilised. CONCLUSION: This data demonstrates that correctly positioned HVE or LEV is effective in preventing airborne spread and persistence of inhalable particles originating from dental AGPs. Additionally, a simple enclosure restricts the spread of aerosols outside of the operating area. CLINICAL SIGNIFICANCE: Employing correctly positioned HVE and LEV in non-mechanically ventilated clinics can prevent the dispersal and persistence of inhalable airborne particles during dental AGPs. Moreover, using enclosures have the additive effect of restricting aerosol spread outside of an operating area.

Assessment of Environmental and Occupational Risk Factors for the Mitigation and Containment of a COVID-19 Outbreak in a Meat Processing Plant.

Throughout the COVID-19 pandemic, meat processing plants have been vulnerable to outbreaks of SARS-CoV-2 infection. Transmission of the virus is difficult to control in these settings because of a combination of factors including environmental conditions and the specific nature of the work. This paper describes a retrospective outbreak investigation in a meat processing plant, a description of the measures taken to prevent or contain further outbreaks, and insights on how those with specific knowledge of the working environment of these plants can collaborate with public health authorities to ensure optimal outbreak control. The plant experienced 111 confirmed positive asymptomatic cases in total with an estimated attack rate of 38% during a five-week period. 4 weeks after the first case, mass screening of all workers was conducted by the public health authorities. Thirty-two workers tested positive, of which 16 (50%) worked in one particular area of the plant, the boning hall (n = 60). The research team prepared and carried out semi-structured interviews with the plant personnel who were charged with COVID control within the plant. They carried out assessments of operational risk factors and also undertook air quality monitoring in the boning hall and abattoir. The air quality measurements in the boning hall showed a gradual build-up of carbon dioxide and aerosol particles over the course of a work shift, confirming that this poorly ventilated area of the plant had an environment that was highly favorable for aerosol transmission of SARS-CoV-2. Assessment of operational conditions incorporated visual surveys of the plant during the working day. Prior to and during the first 2 weeks of the outbreak, multiple measures were introduced into the plant by management, including physical distancing, provision of educational material to workers, visitor restrictions, and environmental monitoring. After the implementation of these measures and their progressive refinement by plant management, the factory had no further linked cases (clusters) or outbreaks for the following 198 days. The tailored approach to risk mitigation adopted in this meat processing plant shows that generic risk mitigation measures, as recommended by public health authorities, can be successfully adapted and optimized by designated plant emergency response teams.

H-Atom Assignment and Sb-O Bonding of [Mes3SbOH][O3SPh] Confirmed by Neutron Diffraction, Multipole Modeling, and Hirshfeld Atom Refinement.

Neutron wavelength-resolved Laue diffraction experiments permit accurate refinement of the H-atom positions and anisotropic displacement parameters of [Mes3SbOH][O3SPh]. A multipole-based charge density refinement and a topological analysis of the refined electron density were also performed. Hirshfeld atom refinement (HAR) recovers the neutron-determined H-atom parameters, and the quantum-mechanical electron density used in HAR recovers the electron density topology from the refined multipole model. These results confirm that [Mes3SbOH][O3SPh] does indeed feature a hydroxystibonium cation with a nominal Sb-O single bond and not a stibine oxide with an Sb=O/Sb+-O- bond.

Unsupported monomeric stibine oxides (R3SbO) remain undiscovered.

Attempts to investigate the properties and reactivity of the stiboryl moiety (R3Sb+-O- or R3Sb[double bond, length as m-dash]O), as in monomeric stibine oxides free of interaction with Lewis acids/bases, led us to conclude that this functional group remains undiscovered. X-ray crystallographic, computational, and spectroscopic data indicate that previously proposed H-bonded stibine oxide adducts Mes3SbOHO3SR are in fact hydroxystibonium salts [Mes3SbOH][RSO3].

Analysis of Oxygen-Pnictogen Bonding with Full Bond Path Topological Analysis of the Electron Density.

A variety of methods are available to investigate the bonding in inorganic compounds. In contrast to wavefunction-based analyses, topological analysis of the electron density affords the advantage of analyzing a physical observable: the electron density. Classical topological analyses of bonding interactions within the atoms in molecules framework typically involve location of a bond path between two atoms and evaluation of a range of real-space functions at the (3, -1) critical point in the electron density that exists on that bond path. We show here that counter-intuitive trends are obtained from the analysis of the electron density (ρ), the Laplacian (∇2ρ), and ellipticity (ε) at the O-E (3, -1) critical points in the coupled-cluster singles doubles electron densities of a series of compounds featuring a range of oxygen-pnictogen bond types: EO+, HEO, H2EOH, H3EOH+, and H3EO (where E = N, P, As, Sb, or Bi). If, instead, these real-space functions are evaluated along the length of the bond path, the discrepancies in the trends are resolved. We show that robust results are also obtained using electron densities from less computationally demanding density functional theory calculations. The increased computational efficiency allowed us to also investigate organic derivatives of these oxygen-pnictogen-bonded compounds and observe that the trends hold in these instances as well. We anticipate that these results will be of use to inorganic chemists engaged in the synthesis and evaluation of novel bonding interactions, particularly those involving heavy main-group elements.

Characterization and source apportionment of single particles from metalworking activities.

Industrial metalworking facilities emit a variety of air toxics including volatile organic compounds, polycyclic aromatic hydrocarbons (PAHs) and heavy metals. In order to investigate these emissions, a 1-month multi-instrument field campaign was undertaken at an industrial site in Grande-Synthe, Dunkirk (France), in May and June 2012. One of the main objectives of the study was to provide new information on the chemical composition of particulate matter with aerodynamic diameters smaller than 2.5 µm (PM2.5) in the vicinity of metalworking facilities. An aerosol time-of-flight mass spectrometer (ATOFMS) was deployed to provide size-resolved chemical mixing state measurements of ambient single particles at high temporal resolution. This mixing state information was then used to apportion PM2.5 to local metalworking facilities influencing the receptor site. Periods when the site was influenced by metalworking sources were characterised by a pronounced increase in particles containing toxic metals (manganese, iron, lead) and polycyclic aromatic hydrocarbons (PAHs) with a variety of chemical mixing states. The association of specific particle classes with a nearby ferromanganese alloy manufacturing plant was confirmed through comparison with previous analysis of raw materials (ores) and chimney filter particle samples collected at the facility. Particles associated with emissions from a nearby steelworks were also identified. The contribution of local metalworking activities to PM2.5 at the receptor site for the period when the ATOFMS was deployed ranged from 1 to 65% with an average contribution of 17%, while the remaining mass was attributed to other local and regional sources. These findings demonstrate the impact of metalworking facilities on air quality downwind and provide useful single particle signatures for future source apportionment studies in communities impacted by metalworking emissions.

Therapeutic Potential of Two Visible Light Responsive Luminescent photoCORMs: Enhanced Cellular Internalization Driven by Lipophilicity.

Herein we report the synthesis, characterization, and cellular internalization properties of two visible-light active luminescent Mn-based photoCORMs. The enhanced membrane permeability of the photoactive Mn carbonyl complex (photoCORM) derived from a designed lipophilic ligand namely, [Mn(CO)3(Imdansyl)(L1)](CF3SO3) (1) (where L1 = a diazabutadiene-based ligand containing two highly lipophilic adamantyl motifs, Imdansyl = dansylimidazole) promoted rapid internalization within human colorectal adenocarcinoma (HT-29) cells compared to [Mn(CO)3(Imdansyl)(L2)](CF3SO3) (2) (where L2 = a diazabutadiene ligand bearing two hydrophilic 1,3,5-triazaadamantyl group). Colocalization experiments using membrane stain indicate different extents of localization of the two CO complexes within the cellular matrix. Visible-light triggered CO release from the lipophilic photoCORM induced caspase-3/7 activation on HT-29 cells, which was detected using confocal microscopy. The rapid accumulation of the lipophilic photoCORM 1 in the cellular membrane resulted in more efficient CO-induced cell death compared to the hydrophilic analogue 2.

Investigation on the near-field evolution of industrial plumes from metalworking activities.

In a context where a significant fraction of the population lives near industrial areas, the main objectives of this study are to provide (a) new data on PM2.5 chemical compositions, heavy-metal concentrations and trace gases released by metalworking activities and (b) new information on the near-field evolution (up to about a thousand meters) of such industrial plumes in terms of particle chemical composition and size distribution. For that purpose, a one-month field campaign was performed in an industrial area near the city of Dunkirk (Northern France), combining measurements of atmospheric dynamics and physico-chemical characterization of air masses. Comparisons between several elemental ratios (mainly Mn/Fe), particle size distributions and volatile organic compound (VOC) concentrations at the stacks and at a near-field site suggest that plumes of a ferromanganese alloy plant were quickly mixed with pollutants emitted by other sources (mainly other industries, possibly traffic and sea spray), in particular a neighboring steelworks, before reaching the sampling site. This led to the emergence of secondary particles related to condensation and/or aggregation phenomena inside the plumes. Metalworking emissions were also identified as a source of new particle formation, formed through the emission of gaseous precursors and their fast transformation and condensation, over a timescale of minutes before reaching the near-field site 800 m downwind. Ultrafine particles emitted at the stacks also quickly agglomerated to form larger particles before reaching the near-field site. These results show that, even over short distances, the chemical composition and size distribution of metalworking plumes may evolve rapidly and the characteristics of particles at the boundary of an industrial area (especially in contiguous urban areas) may differ from those emitted directly at the stacks.

Photochemistry of 2-butenedial and 4-oxo-2-pentenal under atmospheric boundary layer conditions.

Unsaturated 1,4-dicarbonyl compounds, such as 2-butenedial and 4-oxo-2-pentenal are produced in the atmospheric boundary layer from the oxidation of aromatic compounds and furans. These species are expected to undergo rapid photochemical processing, affecting atmospheric composition. In this study, the photochemistry of (E)-2-butenedial and both E and Z isomers of 4-oxo-2-pentenal was investigated under natural sunlight conditions at the large outdoor atmospheric simulation chamber EUPHORE. Photochemical loss rates, relative to j(NO2), are determined to be j((E)-2-butenedial)/j(NO2) = 0.14 (±0.02), j((E)-4-oxo-2-pentenal)/j(NO2) = 0.18 (±0.01), and j((Z)-4-oxo-2-pentenal)/j(NO2) = 0.20 (±0.03). The major products detected for both species are a furanone (30-42%) and, for (E)-2-butenedial, maleic anhydride (2,5-furandione) (12-14%). The mechanism appears to proceed predominantly via photoisomerization to a ketene-enol species following γ-H abstraction. The lifetimes of the ketene-enol species in the dark from 2-butenedial and 4-oxo-2-pentenal are determined to be 465 s and 235 s, respectively. The ketene-enol can undergo ring closure to yield the corresponding furanone, or further unimolecular rearrangement which can subsequently form maleic anhydride. A minor channel (10-15%) also appears to form CO directly. This is presumed to be via a molecular elimination route of an initial biradical intermediate formed in photolysis, with an unsaturated carbonyl (detected here but not quantified) as co-product. α-Dicarbonyl and radical yields are very low, which has implications for ozone production from the photo-oxidation of unsaturated 1,4-dicarbonyls in the boundary layer. Photochemical removal is determined to be the major loss process for these species in the boundary layer with lifetimes of the order of 10-15 minutes, compared to >3 hours for reaction with OH.

Characterization of Primary Organic Aerosol from Domestic Wood, Peat, and Coal Burning in Ireland.

An aerosol chemical speciation monitor (ACSM) was deployed to study the primary nonrefractory submicron particulate matter emissions from the burning of commercially available solid fuels (peat, coal, and wood) typically used in European domestic fuel stoves. Organic mass spectra (MS) from burning wood, peat, and coal were characterized and intercompared for factor analysis against ambient data. The reference profiles characterized in this study were used to estimate the contribution of solid fuel sources, along with oil combustion, to ambient pollution in Galway, Ireland using the multilinear engine (ME-2). During periods influenced by marine air masses, local source contribution had dominant impact and nonsea-spray primary organic emissions comprised 88% of total organic aerosol mass, with peat burning found to be the greatest contributor (39%), followed by oil (21%), coal (17%), and wood (11%). In contrast, the resolved oxygenated organic aerosol (OOA) dominated the aerosol composition in continental air masses, with contributions of 50%, compared to 12% in marine air masses. The source apportionment results suggest that the use of domestic solid fuels (peat, wood, and coal) for home heating is the major source of evening and night-time particulate pollution events despite their small use.

Source characterization of urban particles from meat smoking activities in Chongqing, China using single particle aerosol mass spectrometry.

A Single Particle Aerosol Mass Spectrometer (SPAMS) was deployed in the urban area of Chongqing to characterize the particles present during a severe particulate pollution event that occurred in winter 2014-2015. The measurements were made at a time when residents engaged in traditional outdoor meat smoking activities to preserve meat before the Chinese Spring Festival. The measurement period was predominantly characterized by stagnant weather conditions, highly elevated levels of PM2.5, and low visibility. Eleven major single particle types were identified, with over 92.5% of the particles attributed to biomass burning emissions. Most of the particle types showed appreciable signs of aging in the stagnant air conditions. To simulate the meat smoking activities, a series of controlled smoldering experiments was conducted using freshly cut pine and cypress branches, both with and without wood logs. SPAMS data obtained from these experiments revealed a number of biomass burning particle types, including an elemental and organic carbon (ECOC) type that proved to be the most suitable marker for meat smoking activities. The traditional activity of making preserved meat in southwestern China is shown here to be a major source of particulate pollution. Improved measures to reduce emissions from the smoking of meat should be introduced to improve air quality in regions where smoking meat activity prevails.

Enhanced Volatile Organic Compounds emissions and organic aerosol mass increase the oligomer content of atmospheric aerosols.

Secondary organic aerosol (SOA) accounts for a dominant fraction of the submicron atmospheric particle mass, but knowledge of the formation, composition and climate effects of SOA is incomplete and limits our understanding of overall aerosol effects in the atmosphere. Organic oligomers were discovered as dominant components in SOA over a decade ago in laboratory experiments and have since been proposed to play a dominant role in many aerosol processes. However, it remains unclear whether oligomers are relevant under ambient atmospheric conditions because they are often not clearly observed in field samples. Here we resolve this long-standing discrepancy by showing that elevated SOA mass is one of the key drivers of oligomer formation in the ambient atmosphere and laboratory experiments. We show for the first time that a specific organic compound class in aerosols, oligomers, is strongly correlated with cloud condensation nuclei (CCN) activities of SOA particles. These findings might have important implications for future climate scenarios where increased temperatures cause higher biogenic volatile organic compound (VOC) emissions, which in turn lead to higher SOA mass formation and significant changes in SOA composition. Such processes would need to be considered in climate models for a realistic representation of future aerosol-climate-biosphere feedbacks.