Single stranded 1D-helical Cu coordination polymer for ultra-sensitive ammonia sensing at room temperature.

With the increasing demand for ammonia applications, there is a significant focus on improving NH3 detection performance at room temperature. In this study, we introduce a groundbreaking NH3 gas sensor based on Cu(I)-based coordination polymers, featuring semiconducting, single stranded 1D-helical nanowires constructed from Cu-Cl and N-methylthiourea (MTCP). The MTCP demonstrates an exceptional response to NH3 gas (>900% at 100 ppm) and superior selectivity at room temperature compared to current materials. The interaction mechanism between NH3 and the MTCP sensor is elucidated through a combination of empirical results and computational calculations, leveraging a crystal-determined structure. This reveals the formation of NH3-Cu and NH3-H3C complexes, indicative of a thermodynamically favorable reaction. Additionally, Ag-doped MTCP exhibits higher selectivity and a response over two times greater than the original MTCP, establishing it as a prominent NH3 detection system at room temperature.

Time-resolved spectroscopic investigation for the practical application of a photocatalytic air purifier.

The photocatalytic efficiency for removing volatile organic compounds (VOCs) is significantly influenced by operational parameters like humidity and flow velocity, exhibiting notable and inconsistent fluctuations in both lab-scale and large-scale demonstrations. In this study, operando spectroscopy and isotope analysis were employed to investigate the correlation between humidity levels and degradation of gaseous acetaldehyde using TiO2 photocatalysts, aiming to demonstrate the scaling-up of photocatalytic air purifier. It was observed that rate constants for the mineralization of acetaldehyde rapidly decreased by 30% as relative humidity increased from 25% to 80% in the flow system (with an air velocity, v = 0.78 m/s). However, batch system showed smaller change with only a 10% reduction of the rate constant. Humidity fluctuations were more pronounced under high-speed conditions and were amplified in air purifier (v = 3.8 m/s). Time-resolved operando spectroscopy using an 13C isotope of acetaldehyde revealed that humidity's distinct role in dark adsorption and photocatalytic reactions. Water was found to inhibit the formation of crotonaldehyde during aldol condensation reaction in dark condition. Moreover, water suppressed photocatalytic mineralization by inhibiting acetate oxidation to formate. These findings provide valuable insights for improving realistic air purification processes, underscoring the importance of identifying key intermediates and controlling humidity to enhance the selectivity of gaseous pollutant oxidation reactions.

Visualizing indoor ozone exposures via o-dianisidine based colorimetric passive sampler.

In this study, we developed a colorimetric ozone passive sampler (OPS) incorporating o-dianisidine, a redox dye, into a polydimethylsiloxane sheet. The reaction between ozone (O3) and o-dianisidine result in a visible yellowish color change. Unlike previous passive methods that rely on nitrate extraction or the color disappearance of indigotrisulfonate, the OPS offered improved recognition of average O3 exposure. To optimize OPS based on time-weighted average (TWA), we extracted and quantified the amount of reacted o-dianisidine after exposing OPS to O3 by varying concentrations (0-200 ppb) within 8 h. Colorimetric changes of OPS were further analyzed by capturing images, and the effective absorbance of blue scale showed the best fit (EAB, R2 =0.997). OPS validation on visual detection assessed by six parameters: limit of detection, limit of quantification, reproducibility, sampling rate, selectivity to interfering gases, and sensitivity to environmental factors. To enhance visibility, the OPS was assembled with coloration exposure guidelines, and a smartphone app was developed to quantify average O3 exposures. We further conducted field tests that showed the significant disparity between O3 concentrations and personal O3 exposures, which is considered more crucial for assessing health risks. The OPS was optimized to monitor O3 exposure levels and raise awareness among workers and occupants regarding invisible indoor hazards.

Palladium Single-Atom (In)Stability Under Aqueous Reductive Conditions.

Here, we investigate the stability and performance of single-atom Pd on TiO2 for the selective dechlorination of 4-chlorophenol. A challenge inherent to single atoms is their high surface free energy, which results in a tendency for the surface migration and aggregation of metal atoms. This work evaluates various factors affecting the stability of Pd single-atoms, including atomic dispersion, coordination environment, and substrate properties, under reductive aqueous conditions. The transition from single atoms to clusters vastly enhanced dechlorination kinetics without diminishing carbon-chlorine bond selectivity. X-ray absorption spectroscopy analysis using both in situ and ex situ conditions followed the dynamic transformation of single atoms into amorphous clusters, which consist of a unique unsaturated coordination environment and few nanometer diameter. The intricate relationship between stability and performance underscores the vital role of detailed characterization to properly determine the true active species for dehalogenation reactions.

Photocatalytic Oxidation of Carbon Monoxide Using Synergy of Redox-Separated Photocatalyst and Ozone.

Separating the redox centers of photocatalysts is the most promising strategy to enhance photocatalytic oxidation efficiency. Herein, I investigate a site-selective loading of Pt on facet-engineered TiO2 to achieve carbon monoxide (CO) oxidation at room temperature. Spatially loaded Pt on {101} facets of TiO2 attracts photoinduced electrons efficiently. Thereby, oxygen dissociation is facilitated on the Pt surface, which is confirmed by enhanced oxidation of CO by 2.4 times compared to the benchmark of Pt/TiO2. The remaining holes on TiO2 can be utilized for the oxidation of various gaseous pollutants. Specifically, gaseous ozone, which is present in indoor and ambient air, is converted to a hydroxyl radical by reacting with the hole; thus, the poisoned Pt surface is continuously cleaned during the CO oxidation, as confirmed by in situ diffuse reflectance infrared transform spectroscopy. While randomly loaded Pt can act as recombination center, reducing photocatalytic activity, redox-separated photocatalyst enhances charge separation, boosting CO oxidation and catalyst regeneration via simultaneous ozone decomposition.

Single-Atom Cobalt Incorporated in a 2D Graphene Oxide Membrane for Catalytic Pollutant Degradation.

We introduce a new graphene oxide (GO)-based membrane architecture that hosts cobalt catalysts within its nanoscale pore walls. Such an architecture would not be possible with catalysts in nanoscale, the current benchmark, since they would block the pores or alter the pore structure. Therefore, we developed a new synthesis procedure to load cobalt in an atomically dispersed fashion, the theoretical limit in material downsizing. The use of vitamin C as a mild reducing agent was critical to load Co as dispersed atoms (Co1), preserving the well-stacked 2D structure of GO layers. With the addition of peroxymonosulfate (PMS), the Co1-GO membrane efficiently degraded 1,4-dioxane, a small, neutral pollutant that passes through nanopores in single-pass treatment. The observed 1,4-dioxane degradation kinetics were much faster (>640 times) than the kinetics in suspension and the highest among reported persulfate-based 1,4-dioxane destruction. The capability of the membrane to reject large organic molecules alleviated their effects on radical scavenging. Furthermore, the advanced oxidation also mitigated membrane fouling. The findings of this study present a critical advance toward developing catalytic membranes with which two distinctive and complementary processes, membrane filtration and advanced oxidation, can be combined into a single-step treatment.

Self-wetting triphase photocatalysis for effective and selective removal of hydrophilic volatile organic compounds in air.

Photocatalytic air purification is widely regarded as a promising technology, but it calls for more efficient photocatalytic materials and systems. Here we report a strategy to introduce an in-situ water (self-wetting) layer on WO3 by coating hygroscopic periodic acid (PA) to dramatically enhance the photocatalytic removal of hydrophilic volatile organic compounds (VOCs) in air. In ambient air, water vapor is condensed on WO3 to make a unique tri-phasic (air/water/WO3) system. The in-situ formed water layer selectively concentrates hydrophilic VOCs. PA plays the multiple roles as a water-layer inducer, a surface-complexing ligand enhancing visible light absorption, and a strong electron acceptor. Under visible light, the photogenerated electrons are rapidly scavenged by periodate to produce more •OH. PA/WO3 exhibits excellent photocatalytic activity for acetaldehyde degradation with an apparent quantum efficiency of 64.3% at 460 nm, which is the highest value ever reported. Other hydrophilic VOCs like formaldehyde that are readily dissolved into the in-situ water layer on WO3 are also rapidly degraded, whereas hydrophobic VOCs remain intact during photocatalysis due to the "water barrier effect". PA/WO3 successfully demonstrated an excellent capacity for degrading hydrophilic VOCs selectively in wide-range concentrations (0.5-700 ppmv).

Neighboring Pd single atoms surpass isolated single atoms for selective hydrodehalogenation catalysis.

Single atom catalysts have been found to exhibit superior selectivity over nanoparticulate catalysts for catalytic reactions such as hydrogenation due to their single-site nature. However, improved selectively is often accompanied by loss of activity and slow kinetics. Here we demonstrate that neighboring Pd single atom catalysts retain the high selectivity merit of sparsely isolated single atom catalysts, while the cooperative interactions between neighboring atoms greatly enhance the activity for hydrogenation of carbon-halogen bonds. Experimental results and computational calculations suggest that neighboring Pd atoms work in synergy to lower the energy of key meta-stable reactions steps, i.e., initial water desorption and final hydrogenated product desorption. The placement of neighboring Pd atoms also contribute to nearly exclusive hydrogenation of carbon-chlorine bond without altering any other bonds in organohalogens. The promising hydrogenation performance achieved by neighboring single atoms sheds light on a new approach for manipulating the activity and selectivity of single atom catalysts that are increasingly studied in multiple applications.

Membrane-Confined Iron Oxychloride Nanocatalysts for Highly Efficient Heterogeneous Fenton Water Treatment.

Heterogeneous advanced oxidation processes (AOPs) allow for the destruction of aqueous organic pollutants via oxidation by hydroxyl radicals (•OH). However, practical treatment scenarios suffer from the low availability of short-lived •OH in aqueous bulk, due to both mass transfer limitations and quenching by water constituents, such as natural organic matter (NOM). Herein, we overcome these challenges by loading iron oxychloride catalysts within the pores of a ceramic ultrafiltration membrane, resulting in an internal heterogeneous Fenton reaction that can degrade organics in complex water matrices with pH up to 6.2. With •OH confined inside the nanopores (∼ 20 nm), this membrane reactor completely removed various organic pollutants with water fluxes of up to 100 L m-2 h-1 (equivalent to a retention time of 10 s). This membrane, with a pore size that excludes NOM (>300 kDa), selectively exposed smaller organics to •OH within the pores under confinement and showed excellent resiliency to representative water matrices (simulated surface water and sand filtration effluent samples). Moreover, the membrane exhibited sustained AOPs (>24 h) and could be regenerated for multiple cycles. Our results suggest the feasibility of exploiting ultrafiltration membrane-based AOP platforms for organic pollutant degradation in complex water scenarios.

Cobalt Single Atoms on Tetrapyridomacrocyclic Support for Efficient Peroxymonosulfate Activation.

Transition-metal catalysts that can efficiently activate peroxide bonds have been extensively pursued for various applications including environmental remediation, chemical synthesis, and sensing. Here, we present pyridine-coordinated Co single atoms embedded in a polyaromatic macrostructure as a highly efficient peroxide-activation catalyst. The efficient catalytic production of reactive radicals through peroxymonosulfate activation was demonstrated by the rapid removal of model aqueous pollutants of environmental and public health concerns such as bisphenol A, without pH limitation and Co2+ leaching. The turnover frequency of the newly synthesized Co single-atom catalyst bound to tetrapyridomacrocyclic ligands was found to be 2 to 4 orders of magnitude greater than that of benchmark homogeneous (Co2+) and nanoparticulate (Co3O4) catalysts. Experimental results and density functional theory simulation suggest that the abundant π-conjugation in the polyaromatic support and strong metal-support electronic interaction allow the catalysts to effectively adsorb and activate the peroxide precursor. We further loaded the catalysts onto a widely used poly(vinylidene fluoride) microfiltration membrane and demonstrated that the model pollutants were oxidatively removed as they simply passed through the filter, suggesting the promise of utilizing this novel catalyst for realistic applications.

Oxygen vacancy engineering of cerium oxide for the selective photocatalytic oxidation of aromatic pollutants.

The engineering of oxygen vacancies in CeO2 nanoparticles (NPs) allows the specific fine-tuning of their oxidation power, and this can be used to rationally control their activity and selectivity in the photocatalytic oxidation (PCO) of aromatic pollutants. In the current study, a facile strategy for generating exceptionally stable oxygen vacancies in CeO2 NPs through simple acid (CeO2-A) or base (CeO2-B) treatment was developed. The selective (or mild) PCO activities of CeO2-A and CeO2-B in the degradation of a variety of aromatic substrates in water were successfully demonstrated. CeO2-B has more oxygen vacancies and exhibits superior photocatalytic performance compared to CeO2-A. Control of oxygen vacancies in CeO2 facilitates the adsorption and reduction of dissolved O2 due to their high oxygen-storage ability. The oxygen vacancies in CeO2-B as active sites for oxygen-mediated reactions act as (i) adsorption and reduction reaction sites for dissolved O2, and (ii) photogenerated electron scavenging sites that promote the formation of H2O2 by multi-electron transfer. The oxygen vacancies in CeO2-B are particularly stable and can be used repeatedly over 30 h without losing activity. The selective PCOs of organic substrates were studied systematically, revealing that the operating mechanisms for UV-illuminated CeO2-B are very different from those for conventional TiO2 photocatalysts. Thus, the present study provides new insights into the design of defect-engineered metal oxides for the development of novel photocatalysts.

Mechanism of Heterogeneous Fenton Reaction Kinetics Enhancement under Nanoscale Spatial Confinement.

Nanoscale catalysts that can enable Fenton-like chemistry and produce reactive radicals from hydrogen peroxide activation have been extensively studied in order to overcome the limitations of homogeneous Fenton processes. Despite several advantageous features, limitation in mass transfer of short-lived radical species is an inherent drawback of the heterogeneous system. Here, we present a mechanistic foundation for the way spatial confinement of Fenton chemistry at the nanoscale can significantly enhance the kinetics of radical-mediated oxidation reactions-pollutant degradation in particular. We synthesized a series of Fe3O4-functionalized nanoreactors with precise pore dimensions, based on an anodized aluminum oxide template, to enable quantitative analysis of nanoconfinement effects. Combined with computational simulation of spatial distribution of radicals, we found that hydroxyl radical concentration was strongly dependent on the distance from the surface of Fenton catalysts. This distance dependency significantly influences the gross reaction kinetics and accounts for the observed nanoconfinement effects. We further found that a length scale below 25 nm is critical to avoid the limitation of short-lived species diffusion and achieve kinetics that are orders of magnitude faster than those obtained in a batch suspension of heterogeneous catalysts. These findings suggest a new strategy to develop an innovative heterogeneous catalytic system with the most effective use of hydroxyl radicals in oxidation treatment scenarios.

Amorphous Pd-Loaded Ti4O7 Electrode for Direct Anodic Destruction of Perfluorooctanoic Acid.

We here present a novel Ti4O7-based electrode loaded with amorphous Pd clusters that achieve efficient anodic destruction of perfluorooctanoic acid (PFOA), a persistent water pollutant with significant environmental and human health concerns. These amorphous Pd clusters were characterized by the disordered, noncrystalline arrangement of Pd single atoms in close proximity, in contrast to crystalline Pd nanoparticles that have been often employed to tailor the electronic properties of an electrode. We found that the Ti4O7 electrode loaded with amorphous Pd clusters significantly outperformed the Ti4O7 electrode loaded with crystalline Pd particles due to enhanced electron transfer through dominant Pd-O bonds. Combined with the efficient binding of PFOA and its degradation intermediates to the fluorinated electrode surface, this electrode was capable of mineralizing PFOA and releasing fluoride as F-. The reaction pathway was found to proceed without involving reactive oxygen species and therefore was not quenched by common anions in complex natural water systems such as chloride ions.

Enhanced Pollutant Adsorption and Regeneration of Layered Double Hydroxide-Based Photoregenerable Adsorbent.

Efforts to combine photocatalysts with organic and inorganic adsorbents in engineered composite materials have been pursued extensively to harness sunlight for a green, sustainable regeneration of exhausted adsorbent. Recent advances combining benchmark photocatalyst, titanium dioxide (TiO2), with an inorganic adsorbent, layered double hydroxides (LDHs), have shown potential for an inorganic adsorbent-photocatalyst system but faced critical limitations in realizing practical applications: low adsorption capacity and slow, inefficient photocatalytic regeneration. This study presents an enhanced TiO2/LDH based material that demonstrates a dramatically increased efficiency for both decontamination through adsorption and subsequent solar, photocatalytic regeneration. The combination of delamination and high temperature treatment of LDH is utilized to drastically enhance the adsorption capacity toward model contaminant Methyl Orange to 1450-1459 mg/g, which is even higher than most commercial and lab-synthesized carbon-based adsorbents. Light-active plasmonic nanoparticles are employed to increase the photocatalytic regeneration performance, and experimental results show that the synthesized composite material regains above 97% of its adsorption capacity for 5 cycles of regeneration and readsorption. Overall, the results of this study demonstrate potential for the development of inorganic multifunctional adsorbents that can harness a variety of chemical reactions without the loss of adsorptivity over long-term use.

Spatially separating redox centers on 2D carbon nitride with cobalt single atom for photocatalytic H2O2 production.

Redox cocatalysts play crucial roles in photosynthetic reactions, yet simultaneous loading of oxidative and reductive cocatalysts often leads to enhanced charge recombination that is detrimental to photosynthesis. This study introduces an approach to simultaneously load two redox cocatalysts, atomically dispersed cobalt for improving oxidation activity and anthraquinone for improving reduction selectivity, onto graphitic carbon nitride (C3N4) nanosheets for photocatalytic H2O2 production. Spatial separation of oxidative and reductive cocatalysts was achieved on a two-dimensional (2D) photocatalyst, by coordinating cobalt single atom above the void center of C3N4 and anchoring anthraquinone at the edges of C3N4 nanosheets. Such spatial separation, experimentally confirmed and computationally simulated, was found to be critical for enhancing surface charge separation and achieving efficient H2O2 production. This center/edge strategy for spatial separation of cocatalysts may be applied on other 2D photocatalysts that are increasingly studied in photosynthetic reactions.

Triplet-Triplet Annihilation Upconversion in Broadly Absorbing Layered Film Systems for Sub-Bandgap Photocatalysis.

Upconversion (UC) of sub-bandgap photons extends the effective light absorption range of photovoltaic and photocatalytic devices, allowing them to reach higher conversion efficiencies. Recent advances in polymer host materials make it possible to translate triplet-triplet annihilation (TTA)-UC, the UC mechanism most suitable for this purpose, to solid films that can be integrated into devices. The promise of these films is currently limited by the narrow light absorption of TTA-UC sensitizer chromophores, but incorporating multiple sensitizers into layered film systems presents a promising strategy for producing UC materials with broadened light absorption. This strategy is herein applied for photocatalytic air purification, demonstrating its use in a real-world application for the first time. We superimpose optimized red-to-blue and green-to-blue UC films within dual-layer systems and develop a new photocatalyst compatible with their fluorescence emission. By integrating the dual-layer UC film systems with films of this photocatalyst, we produce the first devices that use TTA-UC to harness both red and green sub-bandgap photons for hydroxyl radical generation and photocatalytic degradation of gaseous acetaldehyde, a model volatile organic compound (VOC). Under white light-emitting diode excitation, the dual-layer film systems' broadened light absorption enhances their devices' photocatalytic degradation efficiency, enabling them to degrade twice as much acetaldehyde as their single-sensitizer counterparts. We show that as a result of the different absorption profiles of the two sensitizers, the film order significantly impacts UC fluorescence and VOC degradation. By probing the influence of the excitation light source, excitation geometry, and chromophore spectral overlap on the film systems' UC performance, we propose a framework for the design of multilayer TTA-UC film systems suitable for integration with a variety of photovoltaic and photocatalytic devices.

Modified carbon nitride nanozyme as bifunctional glucose oxidase-peroxidase for metal-free bioinspired cascade photocatalysis.

Nanomaterials-based biomimetic catalysts with multiple functions are necessary to address challenges in artificial enzymes mimicking physiological processes. Here we report a metal-free nanozyme of modified graphitic carbon nitride and demonstrate its bifunctional enzyme-mimicking roles. With oxidase mimicking, hydrogen peroxide is generated from the coupled photocatalysis of glucose oxidation and dioxygen reduction under visible-light irradiation with a near 100% apparent quantum efficiency. Then, the in situ generated hydrogen peroxide serves for the subsequent peroxidase-mimicking reaction that oxidises a chromogenic substrate on the same catalysts in dark to complete the bifunctional oxidase-peroxidase for biomimetic detection of glucose. The bifunctional cascade catalysis is successfully demonstrated in microfluidics for the real-time colorimetric detection of glucose with a low detection limit of 0.8 µM within 30 s. The artificial nanozymes with physiological functions provide the feasible strategies for mimicking the natural enzymes and realizing the biomedical diagnostics with a smart and miniature device.

Active {001} Facet Exposed TiO2 Nanotubes Photocatalyst Filter for Volatile Organic Compounds Removal: From Material Development to Commercial Indoor Air Cleaner Application.

TiO2 nanotubes (TNT) have a highly ordered open structure that promotes the diffusion of dioxygen and substrates onto active sites and exhibit high durability against deactivation during the photocatalytic air purification. Herein, we synthesized {001} facet-exposed TiO2 nanotubes (001-TNT) using a new and simple method that can be easily scaled up, and tested them for the photocatalytic removal of volatile organic compounds (VOCs) in both a laboratory reactor and a commercial air cleaner. While the surface of TNT is mainly composed of {101} facet anatase, 001-TNT's outer surface was preferentially aligned with {001} facet anatase. The photocatalytic degradation activity of toluene on 001-TNT was at least twice as high as that of TNT. While the TNT experienced a gradual deactivation during successive cycles of photocatalytic degradation of toluene, the 001-TNT did not exhibit any sign of catalyst deactivation under the same test conditions. Under visible light irradiation, the 001-TNT showed degradation activity for acetaldehyde and formaldehyde, while the TNT did not exhibit any degradation activity for them. The 001-TNT filter was successfully scaled up and installed on a commercial air cleaner. The air cleaner equipped with the 001-TNT filters achieved an average VOCs removal efficiency of 72% (in 30 min of operation) in a 8-m3 test chamber, which satisfied the air cleaner standards protocol (Korea) to be the first photocatalytic air cleaner that passed this protocol.

Plasmon-Enhanced Sub-Bandgap Photocatalysis via Triplet-Triplet Annihilation Upconversion for Volatile Organic Compound Degradation.

This study demonstrates the first reported photocatalytic decomposition of an indoor air pollutant, acetaldehyde, using low-energy, sub-bandgap photons harnessed through sensitized triplet-triplet annihilation (TTA) upconversion (UC). To utilize low-intensity noncoherent indoor light and maximize photocatalytic activity, we designed a plasmon-enhanced sub-bandgap photocatalyst device consisting of two main components: (1) TTA-UC rubbery polymer films containing broad-band plasmonic particles (Ag-SiO2) to upconvert sub-bandgap photons, and (2) nanodiamond (ND)-loaded WO3 as a visible-light photocatalyst composite. Effective decomposition of acetaldehyde was achieved using ND/WO3 (Eg = 2.8 eV) coupled with TTA-UC polymer films that emit blue photons (λEm = 425 nm, 2.92 eV) upconverted from green photons (λEx = 532 nm, 2.33 eV), which are wasted in most environmental photocatalysis. The overall photocatalytic efficiency was amplified by the broad-band surface plasmon resonance of AgNP-SiO2 particles incorporated into the TTA-UC films.

Activation of Persulfates by Graphitized Nanodiamonds for Removal of Organic Compounds.

This study introduces graphited nanodiamond (G-ND) as an environmentally friendly, easy-to-regenerate, and cost-effective alternative catalyst to activate persulfate (i.e., peroxymonosulfate (PMS) and peroxydisulfate (PDS)) and oxidize organic compounds in water. The G-ND was found to be superior for persulfate activation to other benchmark carbon materials such as graphite, graphene, fullerene, and carbon nanotubes. The G-ND/persulfate showed selective reactivity toward phenolic compounds and some pharmaceuticals, and the degradation kinetics were not inhibited by the presence of oxidant scavengers and natural organic matter. These results indicate that radical intermediates such as sulfate radical anion and hydroxyl radical are not majorly responsible for this persulfate-driven oxidation of organic compounds. The findings from linear sweep voltammetry, thermogravimetric analysis, Fourier transform infrared spectroscopy, and electron paramagnetic resonance spectroscopy analyses suggest that the both persulfate and phenol effectively bind to G-ND surface and are likely to form charge transfer complex, in which G-ND plays a critical role in mediating facile electron transfer from phenol to persulfate.