Rheological Properties and 3D Printing Behavior of PCL and DMSO2 Composites for Bio-Scaffold.

The significance of rheology in the context of bio three-dimensional (3D) printing lies in its impact on the printing behavior, which shapes material flow and the layer-by-layer stacking process. The objective of this study is to evaluate the rheological and printing behaviors of polycaprolactone (PCL) and dimethyl sulfone (DMSO2) composites. The rheological properties were examined using a rotational rheometer, employing a frequency sweep test. Simultaneously, the printing behavior was investigated using a material extrusion 3D printer, encompassing varying printing temperatures and pressures. Across the temperature range of 120-140 °C, both PCL and PCL/DMSO2 composites demonstrated liquid-like behavior, with a higher loss modulus than storage modulus. This behavior exhibited shear-thinning characteristics. The addition of DMSO2 10, 20, and 30 wt% into the PCL matrix reduced a zero-shear viscosity of 33, 46, and 74% compared to PCL, respectively. The materials exhibited extrusion velocities spanning from 0.0850 to 6.58 mm/s, with velocity being governed by the reciprocal of viscosity. A significant alteration in viscosity by temperature change directly led to a pronounced fluctuation in extrusion velocity. Extrusion velocities below 0.21 mm/s led to the production of unstable printed lines. The presence of distinct viscosities altered extrusion velocity, flow rate, and strut diameter. This phenomenon allowed the categorization of pore shape into three zones: irregular, normal, and no-pore zones. It underscored the importance of comprehending the rheological aspects of biomaterials in enhancing the overall quality of bio-scaffolds during the 3D printing process.

PCL and DMSO2 Composites for Bio-Scaffold Materials.

Polycaprolactone (PCL) has been one of the most popular biomaterials in tissue engineering due to its relatively low melting temperature, excellent thermal stability, and cost-effectiveness. However, its low cell attraction, low elastic modulus, and long-term degradation time have limited its application in a wide range of scaffold studies. Dimethyl sulfone (DMSO2) is a stable and non-hazardous organosulfur compound with low viscosity and high surface tension. PCL and DMSO2 composites may overcome the limitations of PCL as a biomaterial and tailor the properties of biocomposites. In this study, PCL and DMSO2 composites were investigated as a new bio-scaffold material to increase hydrophilicity and mechanical properties and tailor degradation properties in vitro. PCL and DMSO2 were physically mixed with 10, 20, and 30 wt% of DMSO2 to evaluate thermal, hydrophilicity, mechanical, and degradation properties of the composites. The water contact angle of the composites for hydrophilicity decreased by 15.5% compared to pure PCL. The experimental results showed that the mechanical and degradation properties of PCL and DMSO2 were better than those of pure PCL, and the properties can be tuned by regulating DMSO2 concentration in the PCL matrix. The elastic modulus of the composite with 30 wt% of DMSO2 showed 532 MPa, and its degradation time was 18 times faster than that of PCL.

Novel Fabrication of Silver-Coated Copper Nanowires with Organic Compound Solution.

Copper nanowires and Cu-Ag nanowires have various potential applications, such as transparent conductive film, flexible electronics, and conductive filler. In this study, we developed a new green fabrication method for silver-coated copper nanowires using methylsulfonylmethane (DMSO2), which is an environmentally friendly chemical at the food-grade level, to replace toxic chemicals, including ammonia, in the silver coating process. Copper nanowires were synthesized under various reaction temperatures and concentrations of hydrazine (N2H4), ethylenediamine (EDA), sodium hydroxide (NaOH), and copper precursor. The reaction temperature higher than 70 °C caused the oxidation of copper products and evaporation of the sample solution. The optimal conditions to synthesize copper nanowires more than 18 µm in length and 25-45 nm in diameter were determined: 9 M of NaOH, 50 µL of EDA, 17 mM of CuCl2, 5.7 mM of N2H4, and 70 °C reaction temperature. Cu-Ag nanowires, which have about a 12 nm thick silver shell, were successfully fabricated at room temperature under 1 mM of silver nitrate (AgNO3) and 1 wt % of DMSO2. Synthesis conditions for copper and silver-coated copper nanowires have been optimized.

The Green Synthesis of 2D Copper Nanosheets and Their Light Absorption.

In this study, a new green synthesis method for two-dimensional (2D) copper nanosheets is developed using methylsulfonylmethane (DMSO2). The chemical composition and light absorption of 2D copper nanosheets are also studied. A new green method is mainly to utilize DMSO2, which is environmentally friendly enough to be considered a food-grade chemical, unlike the conventional method using toxic chemicals, such as ammonia and hydrazine (N2H4). With a reducing agent, the aggregation of uncertain copper products was produced in the absence of DMSO2, while 2D copper nanosheets were formed in the presence of DMSO2. The optimum concentration of DMSO2 as a surfactant was determined to be 2 M, resulting in large surface areas with regular edges. FTIR spectrum confirmed C-H bonding from DMSO2 used to synthesize 2D copper nanosheets. The light absorption peak was revealed at 800 nm in the UV-vis spectrum. This proposed new green method not only has a simpler process than the conventional methods, such as hydrothermal method and chemical bath deposition, but also substitutes toxic chemicals with DMSO2. 2D copper nanosheets can be used for various applications, including conductive filler or ink in the flexible electronics and laser photonics fields.