Ultrahigh-Flux X-ray Detection by a Solution-Grown Perovskite CsPbBr3 Single-Crystal Semiconductor Detector.

Solution-processed perovskites are promising for hard X-ray and gamma-ray detection, but there are limited reports on their performance under extremely intense X-rays. Here, a solution-grown all-inorganic perovskite CsPbBr3 single-crystal semiconductor detector capable of operating at ultrahigh X-ray flux of 1010 photons s-1 mm-2 is reported. High-quality solution-grown CsPbBr3 single crystals are fabricated into detectors with a Schottky diode structure of eutectic gallium indium/CsPbBr3 /Au. A high reverse-bias voltage of 1000 V (435 V mm- 1 ) can be applied with a small and stable dark current of ≈60-70 nA (≈9-10 nA mm- 2 ), which enables a high sensitivity larger than 10 000 µC Gyair -1 cm- 2 and a simultaneous low detection limit of 22 nGyair s- 1 . The CsPbBr3 semiconductor detector shows an excellent photocurrent linearity and reproducibility under 58.61 keV synchrotron X-rays with flux from 106 to 1010 photons s- 1 mm- 2 . Defect characterization by thermally stimulated current spectroscopy shows a similar low defect density of a synchrotron X-ray and a lab X-ray irradiated device. Solid-state nuclear magnetic resonance spectroscopy suggests that the excellent performance of the solution-grown CsPbBr3 single crystal may be associated with its good short-range order, comparable to the spectrometer-grade melt-grown CsPbBr3 .

Demonstration of Energy-Resolved γ-Ray Detection at Room Temperature by the CsPbCl3 Perovskite Semiconductor.

The detection of γ-rays at room temperature with high-energy resolution using semiconductors is one of the most challenging applications. The presence of even the smallest amount of defects is sufficient to kill the signal generated from γ-rays which makes the availability of semiconductors detectors a rarity. Lead halide perovskite semiconductors exhibit unusually high defect tolerance leading to outstanding and unique optoelectronic properties and are poised to strongly impact applications in photoelectric conversion/detection. Here we demonstrate for the first time that large size single crystals of the all-inorganic perovskite CsPbCl3 semiconductor can function as a high-performance detector for γ-ray nuclear radiation at room temperature. CsPbCl3 is a wide-gap semiconductor with a bandgap of 3.03 eV and possesses a high effective atomic number of 69.8. We identified the two distinct phase transitions in CsPbCl3, from cubic (Pm-3m) to tetragonal (P4/mbm) at 325 K and finally to orthorhombic (Pbnm) at 316 K. Despite crystal twinning induced by phase transitions, CsPbCl3 crystals in detector grade can be obtained with high electrical resistivity of ∼1.7 × 109 Ω·cm. The crystals were grown from the melt with volume over several cubic centimeters and have a low thermal conductivity of 0.6 W m-1 K-1. The mobilities for electron and hole carriers were determined to ∼30 cm2/(V s). Using photoemission yield spectroscopy in air (PYSA), we determined the valence band maximum at 5.66 ± 0.05 eV. Under γ-ray exposure, our Schottky-type planar CsPbCl3 detector achieved an excellent energy resolution (∼16% at 122 keV) accompanied by a high figure-of-merit hole mobility-lifetime product (3.2 × 10-4 cm2/V) and a long hole lifetime (16 µs). The results demonstrate considerable defect tolerance of CsPbCl3 and suggest its strong potential for γ-radiation and X-ray detection at room temperature and above.

Publisher Correction: Direct thermal neutron detection by the 2D semiconductor 6LiInP2Se6.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Direct thermal neutron detection by the 2D semiconductor 6LiInP2Se6.

Highly efficient neutron detectors are critical in many sectors, including national security1,2, medicine3, crystallography4 and astronomy5. The main neutron detection technologies currently used involve 3He-gas-filled proportional counters6 and light scintillators7 for thermalized neutrons. Semiconductors could provide the next generation of neutron detectors because their advantages could make them competitive with or superior to existing detectors. In particular, solids with a high concentration of high-neutron-capture nuclides (such as 6Li, 10B) could be used to develop smaller detectors with high intrinsic efficiencies. However, no promising materials have been reported so far for the construction of direct-conversion semiconductor detectors. Here we report on the semiconductor LiInP2Se6 and demonstrate its potential as a candidate material for the direct detection of thermal neutrons at room temperature. This compound has a good thermal-neutron-capture cross-section, a suitable bandgap (2.06 electronvolts) and a favourable electronic band structure for efficient electron charge transport. We used α particles from an 241Am source as a proxy for the neutron-capture reaction and determined that the compact two-dimensional (2D) LiInP2Se6 detectors resolved the full-energy peak with an energy resolution of 13.9 per cent. Direct neutron detection from a moderated Pu-Be source was achieved using 6Li-enriched (95 per cent) LiInP2Se6 detectors with full-peak resolution. We anticipate that these results will spark interest in this field and enable the replacement of 3He counters by semiconductor-based neutron detectors.

High spectral resolution of gamma-rays at room temperature by perovskite CsPbBr3 single crystals.

Gamma-ray detection and spectroscopy is the quantitative determination of their energy spectra, and is of critical value and critically important in diverse technological and scientific fields. Here we report an improved melt growth method for cesium lead bromide and a special detector design with asymmetrical metal electrode configuration that leads to a high performance at room temperature. As-grown centimeter-sized crystals possess extremely low impurity levels (below 10 p.p.m. for total 69 elements) and detectors achieve 3.9% energy resolution for 122 keV 57Co gamma-ray and 3.8% for 662 keV 137Cs gamma-ray. Cesium lead bromide is unique among all gamma-ray detection materials in that its hole transport properties are responsible for the high performance. The superior mobility-lifetime product for holes (1.34 × 10-3 cm2 V-1) derives mainly from the record long hole carrier lifetime (over 25 µs). The easily scalable crystal growth and high-energy resolution, highlight cesium lead bromide as an exceptional next generation material for room temperature radiation detection.

Cu2I2Se6: A Metal-Inorganic Framework Wide-Bandgap Semiconductor for Photon Detection at Room Temperature.

Cu2I2Se6 is a new wide-bandgap semiconductor with high stability and great potential toward hard radiation and photon detection. Cu2I2Se6 crystallizes in the rhombohedral R3̅m space group with a density of d = 5.287 g·cm-3 and a wide bandgap Eg of 1.95 eV. First-principles electronic band structure calculations at the density functional theory level indicate an indirect bandgap and a low electron effective mass me* of 0.32. The congruently melting compound was grown in centimeter-size Cu2I2Se6 single crystals using a vertical Bridgman method. A high electric resistivity of ∼1012 Ω·cm is readily achieved, and detectors made of Cu2I2Se6 single crystals demonstrate high photosensitivity to Ag Kα X-rays (22.4 keV) and show spectroscopic performance with energy resolutions under 241Am α-particles (5.5 MeV) radiation. The electron mobility is measured by a time-of-flight technique to be ∼46 cm2·V-1·s-1. This value is comparable to that of one of the leading γ-ray detector materials, TlBr, and is a factor of 30 higher than mobility values obtained for amorphous Se for X-ray detection.

Cascaded spintronic logic with low-dimensional carbon.

Remarkable breakthroughs have established the functionality of graphene and carbon nanotube transistors as replacements to silicon in conventional computing structures, and numerous spintronic logic gates have been presented. However, an efficient cascaded logic structure that exploits electron spin has not yet been demonstrated. In this work, we introduce and analyse a cascaded spintronic computing system composed solely of low-dimensional carbon materials. We propose a spintronic switch based on the recent discovery of negative magnetoresistance in graphene nanoribbons, and demonstrate its feasibility through tight-binding calculations of the band structure. Covalently connected carbon nanotubes create magnetic fields through graphene nanoribbons, cascading logic gates through incoherent spintronic switching. The exceptional material properties of carbon materials permit Terahertz operation and two orders of magnitude decrease in power-delay product compared to cutting-edge microprocessors. We hope to inspire the fabrication of these cascaded logic circuits to stimulate a transformative generation of energy-efficient computing.

Defect Antiperovskite Compounds Hg3Q2I2 (Q = S, Se, and Te) for Room-Temperature Hard Radiation Detection.

The high Z chalcohalides Hg3Q2I2 (Q = S, Se, and Te) can be regarded as of antiperovskite structure with ordered vacancies and are demonstrated to be very promising candidates for X- and γ-ray semiconductor detectors. Depending on Q, the ordering of the Hg vacancies in these defect antiperovskites varies and yields a rich family of distinct crystal structures ranging from zero-dimensional to three-dimensional, with a dramatic effect on the properties of each compound. All three Hg3Q2I2 compounds show very suitable optical, electrical, and good mechanical properties required for radiation detection at room temperature. These compounds possess a high density (>7 g/cm3) and wide bandgaps (>1.9 eV), showing great stopping power for hard radiation and high intrinsic electrical resistivity, over 1011 Ω cm. Large single crystals are grown using the vapor transport method, and each material shows excellent photo sensitivity under energetic photons. Detectors made from thin Hg3Q2I2 crystals show reasonable response under a series of radiation sources, including 241Am and 57Co radiation. The dimensionality of Hg-Q motifs (in terms of ordering patterns of Hg vacancies) has a strong influence on the conduction band structure, which gives the quasi one-dimensional Hg3Se2I2 a more prominently dispersive conduction band structure and leads to a low electron effective mass (0.20 m0). For Hg3Se2I2 detectors, spectroscopic resolution is achieved for both 241Am α particles (5.49 MeV) and 241Am γ-rays (59.5 keV), with full widths at half-maximum (FWHM, in percentage) of 19% and 50%, respectively. The carrier mobility-lifetime µτ product for Hg3Q2I2 detectors is achieved as 10-5-10-6 cm2/V. The electron mobility for Hg3Se2I2 is estimated as 104 ± 12 cm2/(V·s). On the basis of these results, Hg3Se2I2 is the most promising for room-temperature radiation detection.

Charge Transport and Observation of Persistent Photoconductivity in Tl6SeI4 Single Crystals.

The chalcohalide compound Tl6SeI4 is a promising wide-bandgap semiconductor for efficient hard radiation detection at room temperature due to its high density, average atomic number and mobility-lifetime product. However, the nature of its charge transport kinetics, especially the role of defects in recombination, has not been examined in detail. To determine the charge transport kinetics in Tl6SeI4 single crystals, electrical conductivity and photoinduced current transient spectroscopy were measured over the temperature range 105-330 K. These measurements reveal the existence of multiple defect states with energy levels in the range 0.10-0.90 eV, within the bandgap of Tl6SeI4. Large persistent photoconductivity (PPC) is observed at low temperature that shows strong thermal quenching at 160 K. The quenching of PPC is described using a configuration coordinate model involving a deep level donor state, which is tentatively attributed to the presence of iodine vacancies or Si interstitial impurities.

Enhancement of the pockels effect in photonic crystal modulators through slow light.

We report a photonic crystal (PhC) optical modulator operating in the optical C band (1530-1565 nm) using barium titanate epitaxial thin films as the electro-optic (EO) medium. The PhC has hexagonal lattice symmetry and an extinction ratio of 9 dB. Due to the slow light enhancement of the EO coefficient near the PhC band edge, the driving electrode can be as short as a one millimeter. We report for the first time, to the best of our knowledge, at microwave frequencies from 10 to 45 GHz the effective EO coefficient and its enhancement through slow light effects. A monotonic increase of the effective EO coefficient from 60 to 110 pm/V across the stopband edge is obtained, resulting in an enhancement as high as 1.8.

Magnetism and Mn Clustering in (In,Mn)Sb Magnetic Semiconductors.

Previously, high-temperature ferromagnetism with a Curie temperature in excess of 400 K was reported in the magnetic semiconductor (In,Mn)Sb films grown by metal-organic vapor phase epitaxy (MOVPE). To determine the role of Mn distribution on its magnetic properties, the Mn 2p core-level X-ray photoelectron spectroscopy (XPS) of (In,Mn)Sb films was measured. For films grown on an InSb substrate, Mn composition is spatially inhomogeneous and its concentration increases with increasing deposition temperature. Spin-orbit splitting energy of the Mn 2p core-level was found to increase with increasing Mn concentration. From the dependence of the measured spin-orbit splitting energy on the Mn concentration, evidence of atomic-scale Mn cluster formation was observed. The measured magnetic moment per Mn atom decreases from 3.0 µB/Mn to 1.8 µB/Mn with increasing Mn concentration, which is attributed to atomic-scale clusters that are ferromagnetic or ferrimagnetic. This detailed investigation gives an insight into the Mn distribution, phase composition and origin of magnetism in MOVPE-grown (In,Mn)Sb magnetic thin films.

Photoconductivity in the chalcohalide semiconductor, SbSeI: a new candidate for hard radiation detection.

We investigated an antimony chalcohalide compound, SbSeI, as a potential semiconductor material for X-ray and γ-ray detection. SbSeI has a wide band gap of 1.70 eV with a density of 5.80 g/cm(3), and it crystallizes in the orthorhombic Pnma space group with a one-dimensional chain structure comprised of infinite zigzag chains of dimers [Sb2Se4I8]n running along the crystallographic b axis. In this study, we investigate conditions for vertical Bridgman crystal growth using combinations of the peak temperature and temperature gradients as well as translation rate set in a three-zone furnace. SbSeI samples grown at 495 °C peak temperature and 19 °C/cm temperature gradient with 2.5 mm/h translation rate produced a single phase of columnar needlelike crystals aligned along the translational direction of the growth. The ingot sample exhibited an n-type semiconductor with resistivity of ∼10(8) Ω·cm. Photoconductivity measurements on these specimens allowed us to determine mobility-lifetime (µτ) products for electron and hole carriers that were found to be of similar order of magnitude (∼10(-4) cm(2)/V). Further, the SbSeI ingot with well-aligned, one-dimensional columnar needlelike crystals shows an appreciable response of Ag Kα X-ray.

Thallium chalcohalides for X-ray and γ-ray detection.

We report that the chalcohalide compound Tl(6)SeI(4) is a promising material for efficient X-ray and γ-ray detection. This material has a higher figure of merit than the current state-of-the-art material for room-temperature operation, Cd(0.9)Zn(0.1)Te (CZT). We have synthesized high-quality single-crystalline wafers of Tl(6)SeI(4) with detector-grade resistivities and good carrier transport of both electrons and holes. We demonstrate that pulse height spectra recorded using Co-57 radiation show an energy resolution matching that of a commercial CZT detector material.

Defect and interfacial structure of heteroepitaxial Fe3O4/BaTiO3 bilayers.

The defect and interfacial structure in a Fe3O4/BaTiO3 heteroepitaxial bilayer was investigated by scanning transmission electron microscopy. The results show that the Fe3O4 film grew epitaxially on BaTiO3. The orientation relationship between Fe3O4, BaTiO3 and MgO is [100]Fe3O4//[100]BaTi3O//[100]MgO and (010)Fe3O4//(010)BaTiO3//(010)MgO. An initial interfacial nucleation layer was formed that partially accommodated the lattice mismatch strain between BaTiO3 and MgO. This investigation indicates that the formation of this buffer layer provides a high-quality BaTiO3 surface for subsequent Fe3O4 growth, resulting in a semicoherent interface. The Fe3O4 surface is nearly atomically abrupt (roughness Rrms = 0.78 nm). The Fe3O4 film exhibits magnetic domains with a diameter in the range of 0.4-2 microm.

Three-dimensional nanoscale composition mapping of semiconductor nanowires.

We demonstrate the three-dimensional composition mapping of a semiconductor nanowire with single-atom sensitivity and subnanometer spatial resolution using atom probe tomography. A new class of atom probe, the local electrode atom probe (LEAP) microscope, was used to map the position of single Au atoms in an InAs nanowire and to image the interface between a Au catalyst and InAs in three dimensions with 0.3-nm resolution. These results establish atom probe tomography as a uniquely powerful tool for analyzing the chemical composition of semiconductor nanostructures.

Ferromagnetic self-assembled quantum dots on semiconductor nanowires.

Ferromagnetic self-assembled alpha-MnAs quantum dots (QD) were grown epitaxially on metal catalyst-grown InAs nanowires (NW) by chemical vapor deposition. Magnetic force microscopy measurements demonstrated that the QDs are stable, single-domain ferromagnets with T(c) values of approximately 310 K. Single QD switching was demonstrated at fields as low as 60 Oe. The hybrid ferromagnetic/semiconductor QD/NW properties provide a promising basis for the development of nanowire spin-valves and magnetic memory devices.