Regional anaesthesia education for consultants and specialists in the UK: a mixed-methods analysis.

BACKGROUND: Regional anaesthesia plays an important role in perioperative care, but gaps in proficiency persist among consultants and specialists. This study aimed to assess confidence levels in performing Plan A blocks among this cohort and to examine the barriers and facilitators influencing regional anaesthesia education. METHODS: Utilising a mixed-methods design, we performed a quantitative survey to gauge self-reported confidence in performing Plan A blocks, coupled with qualitative interviews to explore the complexities of educational barriers and facilitators. UK consultant and specialist anaesthetists were included in the study. RESULTS: A total of 369 survey responses were analysed. Only 22% of survey respondents expressed confidence in performing all Plan A blocks. Specialists (odds ratio [OR] 0.391, 95% confidence interval [CI] 0.179-0.855, P=0.016) and those in their roles for >10 yr (OR 0.551, 95% CI 0.327-0.927, P = 0.024) reported lower confidence levels. A purposive sample was selected for interviews, and data saturation was reached at 31 interviews. Peer-led learning emerged as the most effective learning modality for consultants and specialists. Barriers to regional anaesthesia education included apprehensions regarding complications, self-perceived incompetence, lack of continuing professional development time, insufficient support from the multidisciplinary team, and a lack of inclusivity within the regional anaesthesia community. Organisational culture had a substantial impact, with the presence of local regional anaesthesia champions emerging as a key facilitator. CONCLUSIONS: This study highlights persistent perceived deficiencies in regional anaesthesia skills among consultants and specialists. We identified multiple barriers and facilitators, providing insights for targeted interventions aimed at improving regional anaesthesia education in this group.

Augmented Reality in Ultrasound-Guided Regional Anaesthesia: An Exploratory Study on Models With Potential Implications for Training.

Introduction Needle tip visualisation is a key skill required for the safe practice of ultrasound-guided regional anaesthesia (UGRA). This exploratory study assesses the utility of a novel augmented reality device, NeedleTrainer™, to differentiate between anaesthetists with varying levels of UGRA experience in a simulated environment. Methods Four groups of five participants were recruited (n = 20): novice, early career, experienced anaesthetists, and UGRA experts. Each participant performed three simulated UGRA blocks using NeedleTrainer™ on healthy volunteers (n = 60). The primary aim was to determine whether there was a difference in needle tip visibility, as calculated by the device, between groups of anaesthetists with differing levels of UGRA experience. Secondary aims included the assessment of simulated block conduct by an expert assessor and subjective participant self-assessment. Results The percentage of time the simulated needle tip was maintained in view was higher in the UGRA expert group (57.1%) versus the other three groups (novice 41.8%, early career 44.5%, and experienced anaesthetists 43.6%), but did not reach statistical significance (p = 0.05). An expert assessor was able to differentiate between participants of different UGRA experience when assessing needle tip visibility (novice 3.3 out of 10, early career 5.1, experienced anaesthetists 5.9, UGRA expert group 8.7; p < 0.01) and final needle tip placement (novice 4.2 out of 10, early career 5.6, experienced anaesthetists 6.8, UGRA expert group 8.9; p < 0.01). Subjective self-assessment by participants did not differentiate UGRA experience when assessing needle tip visibility (p = 0.07) or final needle tip placement (p = 0.07). Discussion An expert assessor was able to differentiate between participants with different levels of UGRA experience in this simulated environment. Objective NeedleTrainer™ and subjective participant assessments did not reach statistical significance. The findings are novel as simulated needling using live human subjects has not been assessed before, and no previous studies have attempted to objectively quantify needle tip visibility during simulated UGRA techniques. Future research should include larger sample sizes to further assess the potential use of such technology.

Evaluation of the impact of assistive artificial intelligence on ultrasound scanning for regional anaesthesia.

BACKGROUND: Ultrasound-guided regional anaesthesia relies on the visualisation of key landmark, target, and safety structures on ultrasound. However, this can be challenging, particularly for inexperienced practitioners. Artificial intelligence (AI) is increasingly being applied to medical image interpretation, including ultrasound. In this exploratory study, we evaluated ultrasound scanning performance by non-experts in ultrasound-guided regional anaesthesia, with and without the use of an assistive AI device. METHODS: Twenty-one anaesthetists, all non-experts in ultrasound-guided regional anaesthesia, underwent a standardised teaching session in ultrasound scanning for six peripheral nerve blocks. All then performed a scan for each block; half of the scans were performed with AI assistance and half without. Experts assessed acquisition of the correct block view and correct identification of sono-anatomical structures on each view. Participants reported scan confidence, experts provided a global rating score of scan performance, and scans were timed. RESULTS: Experts assessed 126 ultrasound scans. Participants acquired the correct block view in 56/62 (90.3%) scans with the device compared with 47/62 (75.1%) without (P=0.031, two data points lost). Correct identification of sono-anatomical structures on the view was 188/212 (88.8%) with the device compared with 161/208 (77.4%) without (P=0.002). There was no significant overall difference in participant confidence, expert global performance score, or scan time. CONCLUSIONS: Use of an assistive AI device was associated with improved ultrasound image acquisition and interpretation. Such technology holds potential to augment performance of ultrasound scanning for regional anaesthesia by non-experts, potentially expanding patient access to these techniques. CLINICAL TRIAL REGISTRATION: NCT05156099.

Recommendations for anatomical structures to identify on ultrasound for the performance of intermediate and advanced blocks in ultrasound-guided regional anesthesia.

Recent recommendations describe a set of core anatomical structures to identify on ultrasound for the performance of basic blocks in ultrasound-guided regional anesthesia (UGRA). This project aimed to generate consensus recommendations for core structures to identify during the performance of intermediate and advanced blocks. An initial longlist of structures was refined by an international panel of key opinion leaders in UGRA over a three-round Delphi process. All rounds were conducted virtually and anonymously. Blocks were considered twice in each round: for "orientation scanning" (the dynamic process of acquiring the final view) and for "block view" (which visualizes the block site and is maintained for needle insertion/injection). A "strong recommendation" was made if ≥75% of participants rated any structure as "definitely include" in any round. A "weak recommendation" was made if >50% of participants rated it as "definitely include" or "probably include" for all rounds, but the criterion for strong recommendation was never met. Structures which did not meet either criterion were excluded. Forty-one participants were invited and 40 accepted; 38 completed all three rounds. Participants considered the ultrasound scanning for 19 peripheral nerve blocks across all three rounds. Two hundred and seventy-four structures were reviewed for both orientation scanning and block view; a "strong recommendation" was made for 60 structures on orientation scanning and 44 on the block view. A "weak recommendation" was made for 107 and 62 structures, respectively. These recommendations are intended to help standardize teaching and research in UGRA and support widespread and consistent practice.

Enhanced Photoacoustic Visualisation of Clinical Needles by Combining Interstitial and Extracorporeal Illumination of Elastomeric Nanocomposite Coatings.

Ultrasound (US) image guidance is widely used for minimally invasive procedures, but the invasive medical devices (such as metallic needles), especially their tips, can be poorly visualised in US images, leading to significant complications. Photoacoustic (PA) imaging is promising for visualising invasive devices and peripheral tissue targets. Light-emitting diodes (LEDs) acting as PA excitation sources facilitate the clinical translation of PA imaging, but the image quality is degraded due to the low pulse energy leading to insufficient contrast with needles at deep locations. In this paper, photoacoustic visualisation of clinical needles was enhanced by elastomeric nanocomposite coatings with superficial and interstitial illumination. Candle soot nanoparticle-polydimethylsiloxane (CSNP-PDMS) composites with high optical absorption and large thermal expansion coefficients were applied onto the needle exterior and the end-face of an optical fibre placed in the needle lumen. The excitation light was delivered at the surface by LED arrays and through the embedded optical fibre by a pulsed diode laser to improve the visibility of the needle tip. The performance was validated using an ex-vivo tissue model. An LED-based PA/US imaging system was used for imaging the needle out-of-plane and in-plane insertions over approach angles of 20 deg to 55 deg. The CSNP-PDMS composite conferred substantial visual enhancements on both the needle shaft and the tip, with an average of 1.7- and 1.6-fold improvements in signal-to-noise ratios (SNRs), respectively. With the extended light field involving extracorporeal and interstitial illumination and the highly absorbing coatings, enhanced visualisation of the needle shaft and needle tip was achieved with PA imaging, which could be helpful in current US-guided minimally invasive surgeries.

Core outcome set for peripheral regional anesthesia research: a systematic review and Delphi study.

BACKGROUND/IMPORTANCE: There is heterogeneity among the outcomes used in regional anesthesia research. OBJECTIVE: We aimed to produce a core outcome set for regional anesthesia research. METHODS: We conducted a systematic review and Delphi study to develop this core outcome set. A systematic review of the literature from January 2015 to December 2019 was undertaken to generate a long list of potential outcomes to be included in the core outcome set. For each outcome found, the parameters such as the measurement scale, timing and definitions, were compiled. Regional anesthesia experts were then recruited to participate in a three-round electronic modified Delphi process with incremental thresholds to generate a core outcome set. Once the core outcomes were decided, a final Delphi survey and video conference vote was used to reach a consensus on the outcome parameters. RESULTS: Two hundred and six papers were generated following the systematic review, producing a long list of 224 unique outcomes. Twenty-one international regional anesthesia experts participated in the study. Ten core outcomes were selected after three Delphi survey rounds with 13 outcome parameters reaching consensus after a final Delphi survey and video conference. CONCLUSIONS: We present the first core outcome set for regional anesthesia derived by international expert consensus. These are proposed not to limit the outcomes examined in future studies, but rather to serve as a minimum core set. If adopted, this may increase the relevance of outcomes being studied, reduce selective reporting bias and increase the availability and suitability of data for meta-analysis in this area.

Improving needle visibility in LED-based photoacoustic imaging using deep learning with semi-synthetic datasets.

Photoacoustic imaging has shown great potential for guiding minimally invasive procedures by accurate identification of critical tissue targets and invasive medical devices (such as metallic needles). The use of light emitting diodes (LEDs) as the excitation light sources accelerates its clinical translation owing to its high affordability and portability. However, needle visibility in LED-based photoacoustic imaging is compromised primarily due to its low optical fluence. In this work, we propose a deep learning framework based on U-Net to improve the visibility of clinical metallic needles with a LED-based photoacoustic and ultrasound imaging system. To address the complexity of capturing ground truth for real data and the poor realism of purely simulated data, this framework included the generation of semi-synthetic training datasets combining both simulated data to represent features from the needles and in vivo measurements for tissue background. Evaluation of the trained neural network was performed with needle insertions into blood-vessel-mimicking phantoms, pork joint tissue ex vivo and measurements on human volunteers. This deep learning-based framework substantially improved the needle visibility in photoacoustic imaging in vivo compared to conventional reconstruction by suppressing background noise and image artefacts, achieving 5.8 and 4.5 times improvements in terms of signal-to-noise ratio and the modified Hausdorff distance, respectively. Thus, the proposed framework could be helpful for reducing complications during percutaneous needle insertions by accurate identification of clinical needles in photoacoustic imaging.

Ultrasonic Needle Tracking with Dynamic Electronic Focusing.

Accurate identification of the needle tip is a key challenge with ultrasound-guided percutaneous interventions in regional anaesthesia, foetal surgery and cardiovascular medicine. In this study, we developed an ultrasonic needle tracking system in which the measured needle tip location was used to set the electronic focus of the external ultrasound imaging probe. In this system, needle tip tracking was enabled with a fibre-optic ultrasound sensor that was integrated into a needle stylet, and the A-lines recorded by the sensor were processed to generate tracking images of the needle tip. The needle tip position was estimated from the tracking images. The dependency of the tracking image on the electronic focal depth of the external ultrasound imaging probe was studied in a water bath and with needle insertions into a clinical training phantom. The variability in the estimated tracked position of the needle tip, with the needle tip at fixed depths in the imaging plane across a depth range from 0.5 to 7.5 cm, was studied. When the electronic focus was fixed, the variability of tracked position was found to increase with distance from that focus. The variability with the fixed focus was found to depend on the the relative distance between the needle tip and focal depth. It was found that with dynamic focusing, the maximum variability of tracked position was below 0.31 mm, as compared with 3.97 mm for a fixed focus.

International consensus on anatomical structures to identify on ultrasound for the performance of basic blocks in ultrasound-guided regional anesthesia.

There is no universally agreed set of anatomical structures that must be identified on ultrasound for the performance of ultrasound-guided regional anesthesia (UGRA) techniques. This study aimed to produce standardized recommendations for core (minimum) structures to identify during seven basic blocks. An international consensus was sought through a modified Delphi process. A long-list of anatomical structures was refined through serial review by key opinion leaders in UGRA. All rounds were conducted remotely and anonymously to facilitate equal contribution of each participant. Blocks were considered twice in each round: for "orientation scanning" (the dynamic process of acquiring the final view) and for the "block view" (which visualizes the block site and is maintained for needle insertion/injection). Strong recommendations for inclusion were made if ≥75% of participants rated a structure as "definitely include" in any round. Weak recommendations were made if >50% of participants rated a structure as "definitely include" or "probably include" for all rounds (but the criterion for "strong recommendation" was never met). Thirty-six participants (94.7%) completed all rounds. 128 structures were reviewed; a "strong recommendation" is made for 35 structures on orientation scanning and 28 for the block view. A "weak recommendation" is made for 36 and 20 structures, respectively. This study provides recommendations on the core (minimum) set of anatomical structures to identify during ultrasound scanning for seven basic blocks in UGRA. They are intended to support consistent practice, empower non-experts using basic UGRA techniques, and standardize teaching and research.

Neuromodulation of innate immunity by remote ischaemic conditioning in humans: Experimental cross-over study.

Experimental animal studies on the mechanisms of remote ischaemic conditioning (RIC)-induced cardioprotection against ischaemia/reperfusion injury demonstrate involvement of both neuronal and humoral pathways. Autonomic parasympathetic (vagal) pathways confer organ protection through both direct innervation and/or immunomodulation, but evidence in humans is lacking. During acute inflammation, vagal release of acetylcholine suppresses CD11b expression, a critical ß2-integrin regulating neutrophil adhesion to the endothelium and transmigration to sites of injury. Here, we tested the hypothesis that RIC recruits vagal activity in humans and has an anti-inflammatory effect by reducing neutrophil CD11b expression. Participants (age:50 â€‹± â€‹19 years; 53% female) underwent ultrasound-guided injection of local anaesthetic within the brachial plexus before applying 3 â€‹× â€‹8 min cycles of brachial artery occlusion using a blood pressure cuff (RICblock). RIC was repeated 6 weeks later without brachial plexus block. Masked analysers quantified vagal activity (heart rate, heart rate variability (HRV)) before, and 10 â€‹min after, the last cycle of RIC. RR-interval increased after RIC (reduced heart rate) by 40 â€‹ms (95% confidence intervals (95%CI):13-66; n â€‹= â€‹17 subjects; P â€‹= â€‹0.003). RR-interval did not change after brachial plexus blockade (mean difference: 20 â€‹ms (95%CI:-11 to 50); P â€‹= â€‹0.19). The high-frequency component of HRV was reduced after RICblock, but remained unchanged after RIC (P â€‹< â€‹0.001), indicating that RIC preserved vagal activity. LPS-induced CD16+CD11b+ expression in whole blood (measured by flow cytometry) was reduced by RIC (3615 median fluorescence units (95%CI:475-6754); P = 0.026), compared with 2331 units (95%CI:-3921 to 8582); P = 0.726) after RICblock. These data suggest that in humans RIC recruits vagal cardiac and anti-inflammatory mechanisms via ischaemia/reperfusion-induced activation of sensory nerve fibres that innervate the organ undergoing RIC.

Ultrasound in paediatric anaesthesia - A comprehensive review.

The use of ultrasound is becoming more widespread in anaesthesia. In this review, we discuss the use of ultrasound in various aspects of paediatric anaesthesia and how it can be used to assist diagnostic and therapeutic interventions and the evidence available. We explore the use of ultrasound as an adjunct for regional anaesthesia, vascular access, airway management, bedside cardiac, pulmonary and abdominal imaging and intracranial pressure monitoring.

Three-Dimensional Ultrasonic Needle Tip Tracking with a Fiber-Optic Ultrasound Receiver.

Ultrasound is frequently used for guiding minimally invasive procedures, but visualizing medical devices is often challenging with this imaging modality. When visualization is lost, the medical device can cause trauma to critical tissue structures. Here, a method to track the needle tip during ultrasound image-guided procedures is presented. This method involves the use of a fiber-optic ultrasound receiver that is affixed within the cannula of a medical needle to communicate ultrasonically with the external ultrasound probe. This custom probe comprises a central transducer element array and side element arrays. In addition to conventional two-dimensional (2D) B-mode ultrasound imaging provided by the central array, three-dimensional (3D) needle tip tracking is provided by the side arrays. For B-mode ultrasound imaging, a standard transmit-receive sequence with electronic beamforming is performed. For ultrasonic tracking, Golay-coded ultrasound transmissions from the 4 side arrays are received by the hydrophone sensor, and subsequently the received signals are decoded to identify the needle tip's spatial location with respect to the ultrasound imaging probe. As a preliminary validation of this method, insertions of the needle/hydrophone pair were performed in clinically realistic contexts. This novel ultrasound imaging/tracking method is compatible with current clinical workflow, and it provides reliable device tracking during in-plane and out-of-plane needle insertions.

Handheld Real-Time LED-Based Photoacoustic and Ultrasound Imaging System for Accurate Visualization of Clinical Metal Needles and Superficial Vasculature to Guide Minimally Invasive Procedures.

Ultrasound imaging is widely used to guide minimally invasive procedures, but the visualization of the invasive medical device and the procedure’s target is often challenging. Photoacoustic imaging has shown great promise for guiding minimally invasive procedures, but clinical translation of this technology has often been limited by bulky and expensive excitation sources. In this work, we demonstrate the feasibility of guiding minimally invasive procedures using a dual-mode photoacoustic and ultrasound imaging system with excitation from compact arrays of light-emitting diodes (LEDs) at 850 nm. Three validation experiments were performed. First, clinical metal needles inserted into biological tissue were imaged. Second, the imaging depth of the system was characterized using a blood-vessel-mimicking phantom. Third, the superficial vasculature in human volunteers was imaged. It was found that photoacoustic imaging enabled needle visualization with signal-to-noise ratios that were 1.2 to 2.2 times higher than those obtained with ultrasound imaging, over insertion angles of 26 to 51 degrees. With the blood vessel mimicking phantom, the maximum imaging depth was 38 mm. The superficial vasculature of a human middle finger and a human wrist were clearly visualized in real-time. We conclude that the LED-based system is promising for guiding minimally invasive procedures with peripheral tissue targets.

Gel wax-based tissue-mimicking phantoms for multispectral photoacoustic imaging.

Tissue-mimicking phantoms are widely used for the calibration, evaluation and standardisation of medical imaging systems, and for clinical training. For photoacoustic imaging, tissue-mimicking materials (TMMs) that have tuneable optical and acoustic properties, high stability, and mechanical robustness are highly desired. In this study, gel wax is introduced as a TMM that satisfies these criteria for developing photoacoustic imaging phantoms. The reduced scattering and optical absorption coefficients were independently tuned with the addition of TiO2 and oil-based inks. The frequency-dependent acoustic attenuation obeyed a power law; for native gel wax, it varied from 0.71 dB/cm at 3 MHz to 9.93 dB/cm at 12 MHz. The chosen oil-based inks, which have different optical absorption spectra in the range of 400 to 900 nm, were found to have good photostability under pulsed illumination with photoacoustic excitation light. Optically heterogeneous phantoms that comprised of inclusions with different concentrations of carbon black and coloured inks were fabricated, and multispectral photoacoustic imaging was performed with an optical parametric oscillator and a planar Fabry-Pérot sensor. We conclude that gel wax is well suited as a TMM for multispectral photoacoustic imaging.

Anatomically realistic ultrasound phantoms using gel wax with 3D printed moulds.

Here we describe methods for creating tissue-mimicking ultrasound phantoms based on patient anatomy using a soft material called gel wax. To recreate acoustically realistic tissue properties, two additives to gel wax were considered: paraffin wax to increase acoustic attenuation, and solid glass spheres to increase backscattering. The frequency dependence of ultrasound attenuation was well described with a power law over the measured range of 3-10 MHz. With the addition of paraffin wax in concentrations of 0 to 8 w/w%, attenuation varied from 0.72 to 2.91 dB cm-1 at 3 MHz and from 6.84 to 26.63 dB cm-1 at 10 MHz. With solid glass sphere concentrations in the range of 0.025-0.9 w/w%, acoustic backscattering consistent with a wide range of ultrasonic appearances was achieved. Native gel wax maintained its integrity during compressive deformations up to 60%; its Young's modulus was 17.4 ± 1.4 kPa. The gel wax with additives was shaped by melting and pouring it into 3D printed moulds. Three different phantoms were constructed: a nerve and vessel phantom for peripheral nerve blocks, a heart atrium phantom, and a placental phantom for minimally-invasive fetal interventions. In the first, nerves and vessels were represented as hyperechoic and hypoechoic tubular structures, respectively, in a homogeneous background. The second phantom comprised atria derived from an MRI scan of a patient with an intervening septum and adjoining vena cavae. The third comprised the chorionic surface of a placenta with superficial fetal vessels derived from an image of a post-partum human placenta. Gel wax is a material with widely tuneable ultrasound properties and mechanical characteristics that are well suited for creating patient-specific ultrasound phantoms in several clinical disciplines.

Ultrasonic Needle Tracking with a Fibre-Optic Ultrasound Transmitter for Guidance of Minimally Invasive Fetal Surgery.

Ultrasound imaging is widely used for guiding minimally invasive procedures, including fetal surgery. Visualisation of medical devices such as medical needles is critically important and it remains challenging in many clinical contexts. During in-plane insertions, a needle can have poor visibility at steep insertion angles and at large insertion depths. During out-of-plane insertions, the needle tip can have a similar ultrasonic appearance to the needle shaft when it intersects with the ultrasound imaging plane. When the needle tip is not accurately identified, it can damage critical structures, with potentially severe consequences, including loss of pregnancy. In this paper, we present a tracking system to directly visualise the needle tip with an ultrasonic beacon. The waves transmitted by the beacon were received by an external ultrasound imaging probe. Pairs of co-registered images were acquired in rapid succession with this probe: a photoacoustic image obtained with the system in receive-only mode, and a conventional B-mode ultrasound image. The beacon comprised a custom elastomeric nanocomposite coating at the distal end of an optical fibre, which was positioned within the lumen of a commercial 22 gauge needle. Delivery of pulsed light to the coating resulted in the photoacoustic generation of ultrasonic waves. The measured tracking accuracies in water in the axial and lateral dimensions were 0.39±0.19 mm and 1.85±0.29 mm, respectively. To obtain a preliminary indication of the clinical potential of this ultrasonic needle tracking system, needle insertions were performed in an in vivo fetal sheep model. The results demonstrate that ultrasonic needle tracking with a fibre-optic transmitter is feasible in a clinically realistic fetal surgery environment, and that it could be useful to guide minimally invasive procedures by providing accurate visualisation of the medical device tip.

Looking beyond the imaging plane: 3D needle tracking with a linear array ultrasound probe.

Ultrasound is well suited for guiding many minimally invasive procedures, but its use is often precluded by the poor visibility of medical devices. When devices are not visible, they can damage critical structures, with life-threatening complications. Here, we developed the first ultrasound probe that comprises both focused and unfocused transducer elements to provide both 2D B-mode ultrasound imaging and 3D ultrasonic needle tracking. A fibre-optic hydrophone was integrated into a needle to receive Golay-coded transmissions from the probe and these data were processed to obtain tracking images of the needle tip. The measured tracking accuracy in water was better than 0.4 mm in all dimensions. To demonstrate the clinical potential of this system, insertions were performed into the spine and the uterine cavity, in swine and pregnant ovine models in vivo. In both models, the SNR ranged from 13 to 38 at depths of 22 to 38 mm, at out-of-plane distances of 1 to 15 mm, and at insertion angles of 33 to 42 degrees relative to the probe surface normal. This novel ultrasound imaging/tracking probe has strong potential to improve procedural outcomes by providing 3D needle tip locations that are co-registered to ultrasound images, while maintaining compatibility with current clinical workflow.

Coded excitation ultrasonic needle tracking: An in vivo study.

PURPOSE: Accurate and efficient guidance of medical devices to procedural targets lies at the heart of interventional procedures. Ultrasound imaging is commonly used for device guidance, but determining the location of the device tip can be challenging. Various methods have been proposed to track medical devices during ultrasound-guided procedures, but widespread clinical adoption has remained elusive. With ultrasonic tracking, the location of a medical device is determined by ultrasonic communication between the ultrasound imaging probe and a transducer integrated into the medical device. The signal-to-noise ratio (SNR) of the transducer data is an important determinant of the depth in tissue at which tracking can be performed. In this paper, the authors present a new generation of ultrasonic tracking in which coded excitation is used to improve the SNR without spatial averaging. METHODS: A fiber optic hydrophone was integrated into the cannula of a 20 gauge insertion needle. This transducer received transmissions from the ultrasound imaging probe, and the data were processed to obtain a tracking image of the needle tip. Excitation using Barker or Golay codes was performed to improve the SNR, and conventional bipolar excitation was performed for comparison. The performance of the coded excitation ultrasonic tracking system was evaluated in an in vivo ovine model with insertions to the brachial plexus and the uterine cavity. RESULTS: Coded excitation significantly increased the SNRs of the tracking images, as compared with bipolar excitation. During an insertion to the brachial plexus, the SNR was increased by factors of 3.5 for Barker coding and 7.1 for Golay coding. During insertions into the uterine cavity, these factors ranged from 2.9 to 4.2 for Barker coding and 5.4 to 8.5 for Golay coding. The maximum SNR was 670, which was obtained with Golay coding during needle withdrawal from the brachial plexus. Range sidelobe artifacts were observed in tracking images obtained with Barker coded excitation, and they were visually absent with Golay coded excitation. The spatial tracking accuracy was unaffected by coded excitation. CONCLUSIONS: Coded excitation is a viable method for improving the SNR in ultrasonic tracking without compromising spatial accuracy. This method provided SNR increases that are consistent with theoretical expectations, even in the presence of physiological motion. With the ultrasonic tracking system in this study, the SNR increases will have direct clinical implications in a broad range of interventional procedures by improving visibility of medical devices at large depths.

Construction of 3-Dimensional Printed Ultrasound Phantoms With Wall-less Vessels.

Ultrasound phantoms are invaluable as training tools for vascular access procedures. We developed ultrasound phantoms with wall-less vessels using 3-dimensional printed chambers. Agar was used as a soft tissue-mimicking material, and the wall-less vessels were created with rods that were retracted after the agar was set. The chambers had integrated luer connectors to allow for fluid injections with clinical syringes. Several variations on this design are presented, which include branched and stenotic vessels. The results show that 3-dimensional printing can be well suited to the construction of wall-less ultrasound phantoms, with designs that can be readily customized and shared electronically.