Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 3 de 3
Filter
Add more filters










Database
Language
Publication year range
1.
Appl Opt ; 57(27): 7871-7877, 2018 Sep 20.
Article in English | MEDLINE | ID: mdl-30462053

ABSTRACT

This work is focused on the role of temperature in the de-mixing of absorbance spectra measured in mixed aqueous Na2SO4 and NaNO3 solutions. First, the influence of temperature on the absorbance spectrum of demineralized water was determined. Second, the absorbance spectra of five separate electrolytes (NaNO2, NaNO3, CaCl2, K2CO3, and NaOH) at three temperatures (4°C, 25°C, and 50°C) for concentrations ranging from 0.0625 M to 0.5 M were examined. These five electrolytes show similar temperature dependencies. Finally, absorbance spectra of mixed solutions were investigated at temperatures of 5°C, 15°C, 25°C, 35°C, and 45°C for concentrations ranging from 0.0625 M to 0.5 M per electrolyte in the mixture. The spectral window from 650 to 1100 nm was utilized to observe the ionic and temperature influences on the vibrational modes of the OH bond in the solvent molecules. The effects of dissolving Na2SO4 and NaNO3 are nonlinearly cumulative at lower temperatures indicating extended alteration of the water structure beyond the first hydration shell. A similar trend was observed for a mixture of Na2CO3 and NaCl. Furthermore, it was found that higher temperatures are better for recovering the separate component absorption signatures of an electrolyte mixture. The near-infrared spectral regime is well suited for integrated sensing, and therefore these results can help in designing an integrated sensor to identify inorganic species in water.

2.
Water Res ; 67: 243-54, 2014 Dec 15.
Article in English | MEDLINE | ID: mdl-25282092

ABSTRACT

Biofouling causes performance loss in spiral wound nanofiltration (NF) and reverse osmosis (RO) membrane operation for process and drinking water production. The development of biofilm formation, structure and detachment was studied in-situ, non-destructively with Optical Coherence Tomography (OCT) in direct relation with the hydraulic biofilm resistance and membrane performance parameters: transmembrane pressure drop (TMP) and feed-channel pressure drop (FCP). The objective was to evaluate the suitability of OCT for biofouling studies, applying a membrane biofouling test cell operated at constant crossflow velocity (0.1 m s(-1)) and permeate flux (20 L m(-2)h(-1)). In time, the biofilm thickness on the membrane increased continuously causing a decline in membrane performance. Local biofilm detachment was observed at the biofilm-membrane interface. A mature biofilm was subjected to permeate flux variation (20 to 60 to 20 L m(-2)h(-1)). An increase in permeate flux caused a decrease in biofilm thickness and an increase in biofilm resistance, indicating biofilm compaction. Restoring the original permeate flux did not completely restore the original biofilm parameters: After elevated flux operation the biofilm thickness was reduced to 75% and the hydraulic resistance increased to 116% of the original values. Therefore, after a temporarily permeate flux increase the impact of the biofilm on membrane performance was stronger. OCT imaging of the biofilm with increased permeate flux revealed that the biofilm became compacted, lost internal voids, and became more dense. Therefore, membrane performance losses were not only related to biofilm thickness but also to the internal biofilm structure, e.g. caused by changes in pressure. Optical Coherence Tomography proved to be a suitable tool for quantitative in-situ biofilm thickness and morphology studies which can be carried out non-destructively and in real-time in transparent membrane biofouling monitors.


Subject(s)
Biofilms/growth & development , Biofouling , Filtration/instrumentation , Membranes, Artificial , Nanostructures , Tomography, Optical Coherence/methods , Water Purification/instrumentation , Filtration/methods , Water Movements , Water Purification/methods
3.
Phys Biol ; 9(2): 026006, 2012 04.
Article in English | MEDLINE | ID: mdl-22476025

ABSTRACT

When a high-voltage direct-current is applied to two beakers filled with water, a horizontal electrohydrodynamic (EHD) bridge forms between the two beakers. In this work we study the transport and behavior of bacterial cells added to an EHD bridge set-up. Organisms were added to one or to both beakers, and the transport of the cells through the bridge was monitored using optical and microbiological techniques. It is shown that Escherichia coli top10 (Invitrogen, Carlsbad, CA, USA) and bioluminescent E. coli YMC10 with a plasmid (pJE202) containing Vibrio fischeri genes can survive the exposure to an EHD liquid bridge set-up and the cells are drawn toward the anode due to their negative surface charge. Dielectrophoresis and hydrostatic forces are likely to be the cause for their transport in the opposite direction which was observed as well, but to a much lesser extent. Most E. coli YMC10 bacteria which passed the EHD bridge exhibited increased luminescent activity after 24 h. This can be explained by two likely mechanisms: nutrient limitation in the heavier inoculated vials and a 'survival of the strongest' mechanism.

SELECTION OF CITATIONS
SEARCH DETAIL
...