Dimensions of the Lateral Malleolar Fossa and Its Potential Violation With Lateral Distal Fibular Plate Fixation.

A previously undescribed pitfall of lateral distal fibular locking plates is the risk of violating the lateral malleolar fossa (MF). No previous study has described the dimensions of this fossa. All cases using a lateral distal fibular plate for a fibula fracture from December 2012 to December 2015 (n=365) at a single institution were reviewed. Screws that violated the medial fibular cortical density corresponding to the MF were identified as "at-risk" screws. Available preoperative computed tomography (CT) scans were reviewed (n=69) to measure MF dimensions. Of 365 patients, 115 (31.5%) patients had distal fibular screws at risk of MF violation. There were no significant differences between MF violation and non-violation groups in terms of age, sex, open fracture, syndesmotic fixation, and Weber classification. The MF dimensions were measured on CT scans. Mean height was 12.96 mm (SD, 2.09 mm; range, 9.0-17.3 mm). Mean width was 7.52 mm (SD, 1.37 mm; range, 4.2-10.4 mm). Mean depth was 8.32 mm (SD, 1.59 mm; range, 5.3-11.8 mm). Mean ratio of MF to total fibular width was 0.46 mm (SD, 0.07 mm; range, 0.3-0.65 mm). Mean MF to total fibular depth was 0.42 mm (SD, 0.07 mm; range, 0.28-0.58 mm). There was a difference in dimensions of patients with screws at risk of MF violation compared with those without (MF height: 13.77 vs 12.56, P=.02; MF width: 7.98 vs 7.30, P=.05; MF to fibula width ratio: 0.49 vs 0.44, P=.01; MF to fibula depth ratio: 0.43 vs 0.42, P=.05). The MF violation is a previously unreported but potentially prevalent pitfall of lateral distal fibular plate fixation. Surgeons should be aware of the MF size and exhibit caution when placing screws in the distal locking holes during fibula fixation. [Orthopedics. 2020;43(3):e141-e146.].

Fracture Fixation Using Shape-Memory (Ninitol) Staples.

Shape-memory alloy (SMA) staples are a recent innovation in fracture fixation. These staples have inherent compressive properties that create a stable fracture environment that promotes primary bone healing. They have been used successfully for osteotomies, arthrodesis, and fracture fixation. Understanding where SMA staple compression can be optimized and using proper indications are important for obtaining consistent success and minimizing failures. SMA staples are not a substitute for lag screw fixation or traditional plate and screw constructs.

Outcomes Following Low-Profile Mesh Plate Osteosynthesis of Patella Fractures.

Treatment of patella fractures is fraught with complications and historically poor functional outcomes. A fixation method that allows for early mobilization and decreases symptomatic hardware rates will improve knee range of motion, postoperative functional status, and reoperation rates. The purpose of this study was to evaluate the functional outcomes after locked plate osteosynthesis of patella fractures at a Level 1 trauma center. A retrospective case series was conducted of patients who underwent open reduction internal fixation (ORIF) of a patella fracture using a locked mesh plating technique coupled with neutralization of forces on the distal pole of the patella. Twelve patients were evaluated at a mean follow-up of 19 months (range, 6-30) with physical exam, functional outcomes, and radiographs. There were 9 women and 3 men with an average age of 66.1 years (range, 53-75). Radiographic bony union was achieved in all patients by 3-month follow-up. Visual Analog Pain Score averaged 1.7 (median, 1.0; range, 0-8), the mean Knee Outcome Score - Activities of Daily Living Scale was 83.9 (median, 92.1; range, 45.7-100.0), the mean Short Form Musculoskeletal Function Assessment (SMFA) Function Index was 9.9 (median, 3.7; range, 0.7-41.2), and the mean SMFA Bother Index was 11.1 (median, 3.1; range, 0-62.5). The SF-36 Physical Component Score mean was 48.4 ± 8.5 and the SF-36 Mental Component Score mean was 54.1 ± 9.6. No complications developed and there were no reoperations for nonunion, infection, or symptomatic hardware. This study demonstrates that locked plate osteosynthesis for operative patella fractures can reliably achieve bony union with potentially superior functional outcomes as compared with traditional methods. Further studies are needed to evaluate plate fixation for patella fractures, but early results are promising.

Plate Osteosynthesis of Patella Fractures-A Video Case Report.

Operative management of patella fractures continues to be associated with poor outcomes and high reoperation rates. Traditionally, tension band fixation has been used for more simple fracture patterns; however, fixation remains a challenge particularly for comminuted fractures. More recently, various types of plate fixation have been used and reported in the literature. Earlier mobilization after plate osteosynthesis of patella fractures is possible because of a more robust construct, with the potential for decreased knee stiffness and improved functional outcomes. We present a video case of a 79-year-old man who sustained a displaced patella fracture treated with an anterior mesh plate.

Novel Anterior Plating Technique for Patella Fracture Fixation.

Patella fracture fixation remains a significant challenge for orthopedic surgeons. Although tension band fixation allows for reliable osseous union, especially in simple fracture patterns, it still presents several problems. Plate fixation of patella fractures is a method that allows for more rigid stabilization and earlier mobilization. At the authors' level 1 trauma center, one fellowship-trained trauma surgeon has transitioned to using a novel anterior, low-profile mesh plate construct for all types of patella fractures. This construct allows for stable fixation, osseous union, and neutralization of the inferior pole for even the most comminuted of patella fractures. [Orthopedics. 2017; 40(4):e739-e743.].

Short versus long intramedullary nails for treatment of intertrochanteric femur fractures (OTA 31-A1 and A2).

OBJECTIVES: The purpose of this study was to compare blood loss and operative times associated with long versus short intramedullary nails for intertrochanteric fracture fixation and rate of periprosthetic fracture. DESIGN: A retrospective study. SETTING: Level 1 trauma center. PATIENTS: One hundred ninety-four patients with an intertrochanteric fracture (AO/OTA class 31-A1 and A2) and low-energy mechanism of injury treated by 1 of 4 fellowship-trained orthopaedic traumatologists. INTERVENTION: Short versus long intramedullary nail. METHODS: Medical records were reviewed for age, gender, estimated blood loss (EBL), transfusion rate, operative time, length of stay, and incidence of periprosthetic fracture. Variables were statistically compared between long and short intramedullary nails, with statistical significance at P < 0.05. RESULTS: The average EBL (135.5 ± 91.9 mL) and transfusion rate (57.1%) for long nails were found to be significantly greater (P = 0.002) than the EBL (92.6 ± 47.2 mL) and transfusion rate (40.2%) for short nails. Average operative time was also found to be significantly greater (P < 0.001) for long (56.8 ± 19.4 minutes) than for short (44.0 ± 10.7 minutes) intramedullary nail procedures. The overall incidence of periprosthetic fracture was 0.5%, one patient with initial treatment of a long intramedullary nail. CONCLUSIONS: Statistically significant lower operative time, EBL, and transfusion rate were found in this study for short intramedullary nails. There were no differences seen in length of stay or periprosthetic fracture. The incidence of periprosthetic fracture was very low in both cohorts. Further study with greater statistical power is needed. LEVEL OF EVIDENCE: Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

The effectiveness of standard povidone iodine surgical preparation in decontaminating external fixator components.

The purpose of this study was to evaluate the effectiveness of standard iodine surgical scrubs to remove bacteria from external fixator components. Sterile adjustable external fixation clamps, Schanz pins, and carbon fibre rods were coated with a sterile protein solution and immersed in solution of coagulase negative Staphylococcus (10(3)organisms/ml). They were then decontaminated in standard fashion using a povidone iodine scrub and paint solution. After neutralisation the components were sonicated, serially diluted, plated on blood agar, and incubated for 24h. Unassembled external fixation components were examined individually, and as assembled pin-rod-clamp constructs with and without manipulation of the clamp. Of the three external fixation components (pins, rods, clamps) the highest number of bacterial colony forming units was seen on the external fixation clamps. Manipulation of the assembled construct significantly increased the mean bacterial colony counts compared to the assembled non-manipulated construct (p=0.0007). Standard surgical preparation does not remove all bacteria from external fixators during subsequent operative procedures.