Optimization of dye-contaminated wastewater treatment by fungal Mycelial-light expanded clay aggregate composite.

Dye-contaminated wastewaters from the printing batik industry are hazardous if discharged into the environment without any treatment. Finding an optimization and reusability assessment of a new fungal-material composite for dye-contaminated wastewater treatment is important for efficiency. The study purposes to optimize fungal mycelia Trametes hirsuta EDN 082 - light expanded clay aggregate (myco-LECA) composite for real priting batik dye wastewater treatment by using Response Surface Methodology with Central Composite Design (RSM-CCD). The factors included myco-LECA weight (2-6 g), wastewater volume (20-80 mL), and glucose concentration (0-10%) were applied for 144 h of incubation time. The result showed that the optimum condition was achieved at 5.1 g myco-LECA, at 20 mL wastewater, and at 9.1% glucose, respectively. In this condition, the decolorization values with an incubation time of 144 h were 90, 93, and 95%, at wavelengths 570, 620, and 670 nm, respectively. A reusability assessment was conducted for 19 cycles and the result showed that decolorization effectiveness was still above 96%. GCMS analysis showed the degradation of most compounds in the wastewater and the degradation products of the wastewater demonstrated detoxification against Vigna radiata and Artemia salina. The study suggests that myco-LECA composite has a good performance and therefore is a promising method for the treatment of printing batik wastewater.

A Rarely Occurring Spinal Fracture Precipitated by Generalized Spasms of Tetanus Patient with Spondylitis Tuberculosis.

Background: The occurrence of spinal fracture due to tetanus nowadays is extremely rare, as compared to the 1950s, since the widely available anti-tetanus and antispasmodic therapy. The spinal fracture in tetanus patients is usually reported in higher thoracic vertebrae, previously with a rate as high as 57.5%. Spondylitis is the most common form of skeletal tuberculosis (TB) and can cause a spinal fracture. In Indonesia, tetanus is still reported, while tuberculosis is still endemic; however, co-infection of both diseases is rarely reported. Case Presentation: A 36-year-old male was brought to our hospital with jaw stiffness, accompanied by fever. A history of dental cavities was present, and 5 days prior, he experienced a fishing hook wound on his right index finger. There was no history of TB. Physical examination showed meningismus, 2 cm trismus, abdominal spasm, opisthotonus, and spontaneous muscle spasms, without dysautonomia. In the third week of hospitalization, while his tetanus condition improved, he complained of weakness in both legs. A thorough history taking revealed a history of backache for 3 years. A wedge-shaped fracture on his 11th and 12th thoracic vertebrae was observed on radiographic examination. A spinal TB diagnosis was made, and treatment was started. He refused to get spinal surgery, then went home with 4 out of 5 motor strength scale. After three months, he returned to his routine activity as a food hawker with no motor deficits. Conclusion: Tetanus spinal fracture is extremely rare nowadays; a thorough history of spinal problems/medication is compulsory for anticipation. This patient's spinal fracture was deemed due to a preexisting TB spinal infection that was precipitated by prolonged continuous tetanic spasm due to general tetanus.

Characterization of entrapment behavior of polyphenols in nanostructured lipid carriers and its effect on their antioxidative activity.

Polyphenols are widely used as antioxidant agents to protect human health. Resveratrol, kaempferol, and quercetin have been reported to have potent antioxidant activity; however, these compounds have many problems related to their practical application, such as instability and insolubility. Thus, a nanostructured lipid carrier (NLC) was utilized as a drug delivery system (DDS) to overcome these limitations. This study investigated the particle stability, drug loading performance, and antioxidant activity of polyphenols-incorporated NLCs. The particle size and distribution were suitable for DDS applications, and all the samples demonstrated good stability after 2 months of storage. Based on Raman spectroscopy analysis, polyphenols were successfully encapsulated in NLCs. Quantitative high-performance liquid chromatography analysis indicated that NLCs could load resveratrol more than kaempferol and quercetin. In addition, NLCs have successfully improved all the antioxidant activity per unit concentration of polyphenol (specific antioxidant activity) compared to the free polyphenols. Quercetin-incorporated NLCs showed the highest specific antioxidant activity. This result is the opposite of entrapment efficiency and actual antioxidant activity, most likely influenced by the location of entrapped polyphenol molecules. As it was performed, NLCs are highly recommended to be applied as an antioxidant delivery system.

Ultra-Low-Pressure Membrane Filtration for Simultaneous Recovery of Detergent and Water from Laundry Wastewater.

Reusing water and excess detergent from the laundry industry has become an attractive method to combat water shortages. Membrane filtration is considered an advanced technique and highly attractive due to its excellent advantages. However, the conventional membrane filtration method suffers from membrane fouling, which restricts its performance and diminishes its economic viability. This study assesses the preliminary performance of submerged, gravity-driven membrane filtration­under ultra-low trans-membrane pressure (△P) of <0.1 bar­to combat membrane fouling issues for detergent and water recovery from laundry wastewater. The results show that even under ultra-low pressure, the membrane suffered from compaction that lowered its permeability by 14% under △P of 6 and 10 kPa, with corresponding permeabilities of 2085 ± 259 and 1791 ± 42 L/(m2 h bar). Filtration of a detergent solution also led to up to 8% permeability loss due to membrane fouling. During the filtration of laundry wastewater, 80−91% permeability loss was observed, leading to the lowest flux of 15.6 L/(m2·h) at △P of 10 kPa, 38% lower than △P of 6 kPa (of 25.2 L/(m2·h)). High △P led to both the membrane and the foulant compaction inflating the filtration resistance. The system could recover 83.6% of excess residual detergent, while most micelles were rejected (ascribed from 71% of COD removal). The TDS content could not be retained, disallowing maximum resource recovery. A gravity-driven filtration system can be self-sustained with minimum supervision in residential and industrial laundries. Nevertheless, a detailed study on long-term filtration performance and multiple cleaning cycles is still required in the future.

Characterization of Bioactive Sialyl Oligosaccharides Separated from Colostrum of Indonesia Dairy Goat.

The bioactive functions of oligosaccharides from human milk have been reported by many studies. Many of oligosaccharides isolated from colostrum and/or milk of dairy animals have been reported to have similar chemical structures with those in human colostrum and/or milk. It has been proved by several studies that the oligosaccharides with similar chemical structure shared common bioactivities. Among domesticated dairy animals, bovine/cattle, caprine/goat, and ovine/sheep are the most commonly used species to isolate oligosaccharides from their colostrum and/or milk. Several studies on the oligosaccharides from goat colostrum and milk have revealed similar properties to that of human milk and possess the highest content of sialyl oligosaccharides (SOS) as compared to other ruminants. Indonesia ranks first in Association of Southeast Asian Nations (ASEAN) for goat milk production. Therefore, goat milk is the second most consumed milk in the country. The most reared dairy goat breed in Indonesia is Etawah Grade. However, oligosaccharides from Indonesia dairy animals including goat, have not been characterized. This is the first study to characterize oligosaccharides from Indonesia dairy animals. The present study was aimed to isolate and characterize oligosaccharides, specifically SOS from the colostrum of Etawah Grade goats by using proton/1H-nuclear magnetic resonance. The SOS successfully characterized in this study were: Neu5Ac(α2-3)Gal(ß1-4)Glc (3'-N-acetylneuraminyllactose), Neu5Ac(α2-6)Gal(ß1-4)Glc (6'-N-acetylneuraminyllactose), Neu5Gc(α2-3)Gal(ß1-4)Glc (3'-N-glycolylneuraminyllactose), Neu5Gc(α2-6)Gal(ß1-4)Glc (6'-N-glycolylneuraminyllactose), Neu5Ac(α2-6)Gal(ß1-4) GlcNAc (6'-N-acetylneuraminyllactosamine) and Neu5Gc(α2-6)Gal(ß1-4)GlcNAc (6'-N-glycolylneuraminyllactosamine). This finding shows that Etawah Grade, as a local dairy goat breed in Indonesia, is having significant potential to be natural source of oligosaccharides that can be utilized in the future food and pharmaceutical industries.

Development of Chitosan/Rice Husk-Based Silica Composite Membranes for Biodiesel Purification.

Inorganic-organic composite membranes (IOCMs) are an alternative separation method developed for their straightforward process, economic benefits, and ease of scaling up. The IOCMs in this study were prepared from a biopolymer chitosan matrix and rice husk-based silica filler to remove impurities from crude biodiesel. The IOCMs were prepared through phase inversions, in which the priorly prepared silica particles were dispersed in the dope solution of chitosan. The maximum loading of the silica particles was 60%, capable of reducing the soap level, free glycerol level, and acid number from 547.9 to 12.2 mg/L, 54 to 0.041%, and 2.02 to 1.12 mgKOH/g. These reduced impurity values have satisfied the standardized quality. The chemical composition and morphology of the IOCM was characterized using Fourier-transform infrared spectroscopy and scanning electron microscope-energy dispersive X-Ray spectroscopy. The IOCM water absorption-based porosity and swelling degree were studied as well. Further investigation using isothermal modeling revealed the adsorption dependency against the Sips model equation (R2 = 0.99 and root-mean-square errors = 1.77 × 10-8). Even though regeneration is still a challenging factor in this study, the IOCM prepared from chitosan and rice husk-derived silica particles could be used in crude biodiesel purification.

Marine-Derived Biowaste Conversion into Bioceramic Membrane Materials: Contrasting of Hydroxyapatite Synthesis Methods.

Marine-derived biowaste increment is enormous, yet could be converted into valuable biomaterial, e.g., hydroxyapatite-based bioceramic. Bioceramic material possesses superiority in terms of thermal, chemical, and mechanical properties. Bioceramic material also has a high level of biocompatibility when projected into biological tissues. Tuning the porosity of bioceramic material could also provide benefits for bioseparation application, i.e., ultrafiltration ceramic membrane filtration for food and dairy separation processes. This work presents the investigation of hydroxyapatite conversion from crab-shells marine-based biowaste, by comparing three different methods, i.e., microwave, coprecipitation, and sol-gel. The dried crab-shells were milled and calcinated as calcium precursor, then synthesized into hydroxyapatite with the addition of phosphates precursors via microwave, coprecipitation, or sol-gel. The compound and elemental analysis, degree of crystallinity, and particle shape were compared. The chemical compounds and elements from three different methods were similar, yet the degree of crystallinity was different. Higher Ca/P ratio offer benefit in producing a bioceramic ultrafiltration membrane, due to low sintering temperature. The hydroxyapatite from coprecipitation and sol-gel methods showed a significant degree of crystallinity compared with that of the microwave route. However, due to the presence of Fe and Sr impurities, the secondary phase of Ca9FeH(PO4)7 was found in the sol-gel method. The secondary phase compound has high absorbance capacity, an advantage for bioceramic ultrafiltration membranes. Furthermore, the sol-gel method could produce a snake-like shape, compared to the oval shape of the coprecipitation route, another benefit to fabricate porous bioceramic for a membrane filter.

Cacao Pod Husk Extract Phenolic Nanopowder-Impregnated Cellulose Acetate Matrix for Biofouling Control in Membranes.

The ultrafiltration membrane process is widely used for fruit juice clarification, yet the occurring of fouling promotes a decline in process efficiency. To reduce the fouling potential in the membrane application in food processing, the use of natural phenolic compounds extracted from cocoa pod husk is investigated. The cocoa pod husk extract (CPHE) was prepared in phenolic nanoparticles form and added into the polymer solution at varying concentrations of 0.5 wt%, 0.75 wt%, and 1.0 wt%, respectively. The composite membrane was made of a cellulose acetate polymer using DMF (dimethylformamide) and DMAc (dimethylacetamide) solvents. The highest permeability of 2.34 L m-2 h-1 bar-1 was achieved by 1.0 wt% CPHE/CA prepared with the DMAc solvent. CPHE was found to reduce the amount of Escherichia coli attached to the membranes by 90.5% and 70.8% for membranes prepared with DMF and DMAc, respectively. It is concluded that CPHE can be used to control biofouling in the membrane for food applications.

Synthesis of Polyurethane Membranes Derived from Red Seaweed Biomass for Ammonia Filtration.

The development of membrane technology is rapidly increasing due to its numerous advantages, including its ease of use, chemical resistant properties, reduced energy consumption, and limited need for chemical additives. Polyurethane membranes (PUM) are a particular type of membrane filter, synthesized using natural organic materials containing hydroxy (-OH) groups, which can be used for water filtration, e.g., ammonia removal. Red seaweed (Rhodophyta) has specific molecules which could be used for PUM. This study aimed to ascertain PUM synthesis from red seaweed biomass (PUM-RSB) by using toluene diisocyanate via the phase inversion method. Red seaweed biomass with a particle size of 777.3 nm was used as starting material containing abundant hydroxy groups visible in the FTIR spectrum. The PUM-RSB produced was elastic, dry, and sturdy. Thermal analysis of the membrane showed that the initial high degradation temperature was 290.71 °C, while the residue from the thermogravimetric analysis (TGA) analysis was 4.88%. The PUM-RSB section indicates the presence of cavities on the inside. The mechanical properties of the PUM-RSB have a stress value of 53.43 MPa and a nominal strain of 2.85%. In order to optimize the PUM-RSB synthesis, a Box-Behnken design of Response Surface Methodology was conducted and showed the value of RSB 0.176 g, TDI 3.000 g, and glycerin 0.200 g, resulting from the theoretical and experimental rejection factor, i.e., 31.3% and 23.9%, respectively.

Systematic Characterization of Nanostructured Lipid Carriers from Cetyl Palmitate/Caprylic Triglyceride/Tween 80 Mixtures in an Aqueous Environment.

Nanostructured lipid carriers (NLCs) are gaining attention as the new generation of lipid vehicles. These carriers consist of saturated lipids with small drops of liquid oil dispersed into the inner lipid matrix and are stabilized by a surfactant. Conventionally, NLC-based drug delivery systems have been widely studied, and many researchers are looking into the composition of NLC properties to improve the performance of NLCs. The membrane fluidity and polarity of self-assembling lipids are also essential properties that must be affected by membrane compositions; however, such fundamental characteristics have not been studied yet. In this study, NLCs were prepared from cetyl palmitate (CP), caprylic triglyceride (CaTG), and Tween 80 (T80). Structural properties, such as particle size and ζ-potential of the CP/CaTG/T80 ternary mixtures, were investigated. Then, the systematic characterization of self-assembly properties using fluorescence-based analysis was applied for the first time to the NLC system. As a final step, the ternary diagram was developed based on the self-assembly properties to summarize the possible structures formed at different compositions. The results showed four states: micelle-like, oil-in-water (O/W) emulsion-like, solid lipid nanoparticle-like, and intermediate (solid-liquid coexistence). For the purpose of making the lipid matrix more liquified, the heterogeneous state and the disordered state of the O/W emulsion-like structure might fulfill the criteria of NLCs. Finally, the ternary diagram provides new information about the assembly state of NLC constituents that could become an important reference for developing high-performance NLCs.

Development of Chitosan/Starch-Based Forward Osmosis Water Filtration Bags for Emergency Water Supply.

A forward osmosis (FO) membrane was developed from a mixture of chitosan and Dioscorea hispida starch, cross-linked using glutaraldehyde. The cross-linked chitosan/starch membrane was revealed to have high mechanical properties with an asymmetric structure. The prepared membrane's performance was investigated as an FO filter assembled in a polypropylene water filter bag and aluminum foil plastic. In order to study the FO process, brackish water was used as a feed solution, drawn using three types of solution (fructose, sucrose, and fructose/sucrose mixture, each with 3 M concentration). The maximum water flux (5.75 L/m2 h) was achieved using 3 M sucrose. The cross-linked membrane restrained the ions in the feed with a rejection factor value close to 100%. The water quality parameters were evaluated for the physical, chemical, and biological criteria, such as pH, salinity, conductivity, total dissolved solids (TDS), heavy metals, and Escherichia coli content. The water quality parameters for the FO-processed water met that set by the World Health Organization for drinking water. FO filter bags with cross-linked chitosan/starch membranes can be an option to produce drinking water during an emergency.

Facile Approaches of Polymeric Face Masks Reuse and Reinforcements for Micro-Aerosol Droplets and Viruses Filtration: A Review.

Since the widespread of severe acute respiratory syndrome of coronavirus 2 (SARS-CoV-2) disease, the utilization of face masks has become omnipresent all over the world. Face masks are believed to contribute to an adequate protection against respiratory infections spread through micro-droplets among the infected person to non-infected others. However, due to the very high demands of face masks, especially the N95-type mask typically worn by medical workers, the public faces a shortage of face masks. Many papers have been published recently that focus on developing new and facile techniques to reuse and reinforce commercially available face masks. For instance, the N95 mask uses a polymer-based (membrane) filter inside, and the filter membrane can be replaced if needed. Another polymer sputtering technique by using a simple cotton candy machine could provide a cheap and robust solution for face mask fabrication. This review discuss the novel approaches of face mask reuse and reinforcement specifically by using membrane-based technology. Tuning the polymeric properties of face masks to enhance filterability and virus inactivity is crucial for future investigation.

The Water Flux Dynamic in a Hybrid Forward Osmosis-Membrane Distillation for Produced Water Treatment.

Standalone membrane distillation (MD) and forward osmosis (FO) have been considered as promising technologies for produced water treatment. However, standalone MD is still vulnerable to membrane-wetting and scaling problems, while the standalone FO is energy-intensive, since it requires the recovery of the draw solution (DS). Thus, the idea of coupling FO and MD is proposed as a promising combination in which the MD facilitate DS recovery for FO-and FO acts as pretreatment to enhance fouling and wetting-resistance of the MD. This study was therefore conducted to investigate the effect of DS temperature on the dynamic of water flux of a hybrid FO-MD. First, the effect of the DS temperature on the standalone FO and MD was evaluated. Later, the flux dynamics of both units were evaluated when the FO and DS recovery (via MD) was run simultaneously. Results show that an increase in the temperature difference (from 20 to 60 °C) resulted in an increase of the FO and MD fluxes from 11.17 ± 3.85 to 30.17 ± 5.51 L m-2 h-1, and from 0.5 ± 0.75 to 16.08 L m-2 h-1, respectively. For the hybrid FO-MD, either MD or FO could act as the limiting process that dictates the equilibrium flux. Both the concentration and the temperature of DS affected the flux dynamic. When the FO flux was higher than MD flux, DS was diluted, and its temperature decreased; both then lowered the FO flux until reaching an equilibrium (equal FO and MD flux). When FO flux was lower than MD flux, the DS was concentrated which increased the FO flux until reaching the equilibrium. The overall results suggest the importance of temperature and concentration of solutes in the DS in affecting the water flux dynamic hybrid process.

Recent progress in integrated fixed-film activated sludge process for wastewater treatment: A review.

Integrated fixed-film activated sludge (IFAS) process is considered as one of the leading-edge processes that provides a sustainable solution for wastewater treatment. IFAS was introduced as an advancement of the moving bed biofilm reactor by integrating the attached and the suspended growth systems. IFAS offers advantages over the conventional activated sludge process such as reduced footprint, enhanced nutrient removal, complete nitrification, longer solids retention time and better removal of anthropogenic composites. IFAS has been recognized as an attractive option as stated from the results of many pilot and full scales studies. Generally, IFAS achieves >90% removals for combined chemical oxygen demand and ammonia, improves sludge settling properties and enhances operational stability. Recently developed IFAS reactors incorporate frameworks for either methane production, energy generation through algae, or microbial fuel cells. This review details the recent development in IFAS with the focus on the pilot and full-scale applications. The microbial community analyses of IFAS biofilm and floc are underlined along with the special emphasis on organics and nitrogen removals, as well as the future research perspectives.

Insight into the Sustainable Integration of Bio- and Petroleum Refineries for the Production of Fuels and Chemicals.

A petroleum refinery heavily depends on crude oil as its main feedstock to produce liquid fuels and chemicals. In the long term, this unyielding dependency is threatened by the depletion of the crude oil reserve. However, in the short term, its price highly fluctuates due to various factors, such as regional and global security instability causing additional complexity on refinery production planning. The petroleum refining industries are also drawing criticism and pressure due to their direct and indirect impacts on the environment. The exhaust gas emission of automobiles apart from the industrial and power plant emission has been viewed as the cause of global warming. In this sense, there is a need for a feasible, sustainable, and environmentally friendly generation process of fuels and chemicals. The attention turns to the utilization of biomass as a potential feedstock to produce substitutes for petroleum-derived fuels and building blocks for biochemicals. Biomass is abundant and currently is still low in utilization. The biorefinery, a facility to convert biomass into biofuels and biochemicals, is still lacking in competitiveness to a petroleum refinery. An attractive solution that addresses both is by the integration of bio- and petroleum refineries. In this context, the right decision making in the process selection and technologies can lower the investment and operational costs and assure optimum yield. Process optimization based on mathematical programming has been extensively used to conduct techno-economic and sustainability analysis for bio-, petroleum, and the integration of both refineries. This paper provides insights into the context of crude oil and biomass as potential refinery feedstocks. The current optimization status of either bio- or petroleum refineries and their integration is reviewed with the focus on the methods to solve the multi-objective optimization problems. Internal and external uncertain parameters are important aspects in process optimization. The nature of these uncertain parameters and their representation methods in process optimization are also discussed.

Microalgae in Food-Energy-Water Nexus: A Review on Progress of Forward Osmosis Applications.

Nowadays the world is facing vulnerability problems related to food, energy and water demands. The challenges in those subsystems are intertwined and thus require inter-discipline approaches to address them. Bioresources offer promising solutions of the dilemma. Microalgae biomass is expected to become a superfood and a favorable energy feedstock and assist in supplying clean water and treat wastewater. Efficient mass production of microalgae, both during upstream and downstream processes, is thus a key process for providing high quality and affordable microalgae biomass. This paper covers recent progress in microalgae harvesting and dewatering by using osmotic driven membrane process, i.e., forward osmosis. Critical factors during forward osmosis process for microalgae harvesting and dewatering are discussed. Finally, perspective on further research directions and implementation scenarios of the forward osmosis are also provided.

Membrane Surface Patterning as a Fouling Mitigation Strategy in Liquid Filtration: A Review.

Membrane fouling is seen as the main culprit that hinders the widespread of membrane application in liquid-based filtration. Therefore, fouling management is key for the successful implementation of membrane processes, and it is done across all magnitudes. For optimum operation, membrane developments and surface modifications have largely been reported, including membrane surface patterning. Membrane surface patterning involves structural modification of the membrane surface to induce secondary flow due to eddies, which mitigate foulant agglomeration and increase the effective surface area for improved permeance and antifouling properties. This paper reviews surface patterning approaches used for fouling mitigation in water and wastewater treatments. The focus is given on the pattern formation methods and their effect on overall process performances.

Hydrogel-coated feed spacers in two-phase flow cleaning in spiral wound membrane elements: a novel platform for eco-friendly biofouling mitigation.

Biofouling is still a major challenge in the application of nanofiltration and reverse osmosis membranes. Here we present a platform approach for environmentally friendly biofouling control using a combination of a hydrogel-coated feed spacer and two-phase flow cleaning. Neutral (polyHEMA-co-PEG10MA), cationic (polyDMAEMA) and anionic (polySPMA) hydrogels have been successfully grafted onto polypropylene (PP) feed spacers via plasma-mediated UV-polymerization. These coatings maintained their chemical stability after 7 days incubation in neutral (pH 7), acidic (pH 5) and basic (pH 9) environments. Anti-biofouling properties of these coatings were evaluated by Escherichia coli attachment assay and nanofiltration experiments at a TMP of 600 kPag using tap water with additional nutrients as feed and by using optical coherence tomography. Especially the anionic polySPMA-coated PP feed spacer shows reduced attachment of E. coli and biofouling in the spacer-filled narrow channels resulting in delayed biofilm growth. Employing this highly hydrophilic coating during removal of biofouling by two-phase flow cleaning also showed enhanced cleaning efficiency, feed channel pressure drop and flux recoveries. The strong hydrophilic nature and the presence of negative charge on polySPMA are most probably responsible for the improved antifouling behavior. A combination of polySPMA-coated PP feed spacers and two-phase flow cleaning therefore is promising and an environmentally friendly approach to control biofouling in NF/RO systems employing spiral-wound membrane modules.