Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 16 de 16
Filter
1.
Clin Cosmet Investig Dent ; 16: 91-99, 2024.
Article in English | MEDLINE | ID: mdl-38650600

ABSTRACT

Purpose: This research aimed to describe the stress distribution of an endodontically treated tooth with a mesio-occluso-distal (MOD) cavity restored with direct composite reinforced with polyethylene and e-glass ribbon fiber. Methods: This research was a descriptive study using the finite element method. A 3D model of the mandibular first molar solid after endodontic treatment with class II MOD preparation was prepared using Solidworks software. Finite element simulation was carried out using Abaqus software. In the first simulation, 180 N force was applied (vertically 90° perpendicular to the occlusal surface) at four points of loading: the tip of the mesiobuccal and distobuccal cusp, central fossa, and distal marginal ridge. For the second simulation, a 100 N force was applied at a 45° lateral angle to the occlusal surface at two loading points: the lingual slope of the mesiobuccal and distobuccal cusp. Results: This study showed that the stress concentration was located in the occlusal pit and fissure, CEJ distal area, bifurcation in dentin, and the 1/3 cervical area of root dentin. The stress value generated after vertical and lateral force did not exceed the tooth and restoration's compressive and tensile strength value. The failure occurred at the interface of enamel and composite near the loading point area due to vertical load, both on polyethylene and e-glass fiber ribbon-reinforced composite restoration. Stress distribution of an endodontically treated tooth with a MOD cavity restored with ribbon fiber-reinforced composite using the finite element method showed that the highest stress concentration occurred on the surface close to the loading point, in narrow, concave, and sharp areas, and more apically for endodontically treated teeth. Conclusion: Neither the tooth nor restoration failed after vertical and horizontal loads. The interface between enamel and composite on the occlusal surface failed.

2.
Proc Natl Acad Sci U S A ; 120(47): e2217064120, 2023 Nov 21.
Article in English | MEDLINE | ID: mdl-38033310

ABSTRACT

The intertropical convergence zone (ITCZ) plays a key role in regulating tropical hydroclimate and global water cycle through changes in its convection strength, latitudinal position, and width. The long-term variability of the ITCZ, along with the corresponding driving mechanisms, however, remains obscure, mainly because it is difficult to separate different ITCZ variables in paleoclimate proxy records. Here, we report a speleothem oxygen isotope (δ18O) record from southwestern Sulawesi, Indonesia, and compile it with other speleothem records from the Maritime Continent. Using the spatial gradient of speleothem δ18O along a transect across the ITCZ, we constrain ITCZ variabilities over the Maritime Continent during the past 30,000 y. We find that ITCZ convection strength overall intensified from the last glacial period to the Holocene, following changes in climate boundary conditions. The mean position of the regional ITCZ has moved latitudinally no more than 3° in the past 30,000 y, consistent with the deduction from the atmospheric energy framework. However, different from modern observations and model simulations for future warming, the ITCZ appeared narrower during both the late Holocene and most part of the last glacial period, and its expansion occurred during Heinrich stadials and the early-to-mid Holocene. We also find that during the last glacial and deglacial period, prominent millennial-scale ITCZ changes were closely tied to the variability of the Atlantic meridional overturning circulation (AMOC), whereas during the Holocene, they were predominantly modulated by the long-term variability of the Walker circulation.

3.
Aust Endod J ; 49(3): 665-674, 2023 Dec.
Article in English | MEDLINE | ID: mdl-37789568

ABSTRACT

The aim of the study was to evaluate the influence of resin cement material types on tooth with endocrown and onlay restorations. The first molar was scanned using Micro-CT and underwent a modelling process to obtain the 3D model for computational simulation. Eight models were simulated in the current study with two loading conditions (720N vertical load and 200N oblique load), two types of restoration (onlay and endocrown restorations), and two resin cement variants (dual-cure resin cement and light-cure resin cement). The tooth with onlay restoration showed a significant stress reduction (up to 70%) when using light-cure resin cement compared to dual-cure resin cement. In contrast, types of cement did not affect stress distribution in the tooth with endocrown restoration. The current study found that dual-cure resin cement was preferable in Endocrown and Onlay restorations, due to dual-cure resin cement provided better bond strength compared to light-cure resin cement.


Subject(s)
Crowns , Resin Cements , Resin Cements/chemistry , Finite Element Analysis , Dental Stress Analysis , Inlays , Materials Testing , Composite Resins/chemistry
4.
Opt Express ; 31(17): 27543-27552, 2023 Aug 14.
Article in English | MEDLINE | ID: mdl-37710827

ABSTRACT

Single-mode tunable quantum cascade lasers (QCLs) are promising for high-resolution and highly sensitive trace gases sensing across the mid-infrared (MIR) region. We report on the development of a tunable single-mode slot waveguide QCL array in the long wavelength part of the MIR regime (>12 µm). This laser array exhibits a tuning range of around 12 cm-1, from 735.3 to 747.3 cm-1. Using this developed single-mode tunable QCL, we demonstrate individual gas sensing, yielding the detection limit of 940 ppb and 470 ppb for acetylene and o-xylene, respectively. To verify the potential of the developed QCL array in multi-species gas detection, laser absorption measurements of two mixed gases of acetylene and o-xylene were conducted, showing the absorption features of the corresponding gases agree well with the theoretical predictions.

5.
Pak J Biol Sci ; 25(10): 892-898, 2022 Sep.
Article in English | MEDLINE | ID: mdl-36404742

ABSTRACT

<b>Background and Objective:</b> The traditional beverage of Southeast Sulawesi is Kameko and Pongasih, which is a traditional alcoholic beverage. One of the bad effects of alcohol on reproductive health is the occurrence of infertility. This research aimed to determine the effect of consuming traditional beverages of Kameko and Pongasih on the quality of sperm of mice (<i>Mus musculus</i>). <b>Materials and Methods:</b> This research used a true experiment. The samples were some healthy mice (<i>Mus musculus</i>) aged 6-8 weeks as much 24 tails and divided into 4 groups. On the 36th day after the treatment was completed, the mice were terminated and prepared for microscopic sperm quality analysis. The quality of sperm includes motility, viability, concentration and morphology. The data test uses the Shapiro-Wilk Test, One-way ANOVA and <i>post hoc</i> LSD Test. <b>Results:</b> Kameko traditional beverage had a significant influence on sperm quality with motility, morphology, sperm concentration (p = 0.000) and viability (p = 0.001). Pongasih traditional beverage has a significant influence on sperm quality with motility parameter, morphology, sperm concentration (p = 0.000) and viability (p = 0.001). Kameko and Pongasih traditional beverages did not have a significant difference in sperm quality with motility parameter (p = 0.463), viability (p = 1.000), morphology (p = 0.553) and amount of concentration (p = 0.714). <b>Conclusion:</b> South East Sulawesi traditional beverages Kameko and Pongasih have effects on mice's (<i>Mus musculus</i>) sperm quality, but there was no difference in the group of mice which have been given Kameko and Pongasih.


Subject(s)
Semen , Spermatozoa , Male , Mice , Animals , Indonesia , Sperm Count , Semen Analysis
6.
Opt Express ; 30(20): 35999-36009, 2022 Sep 26.
Article in English | MEDLINE | ID: mdl-36258538

ABSTRACT

We report a cost-efficient method to demonstrate the beam combining of five laser elements in an array of tunable slot waveguide quantum cascade lasers in the mid-infrared region at around 10 µm. An aspherical lens with five fine-tuned mini mirrors was employed to collimate the individual beams from the laser array. To verify the feasibility of this beam combining approach, the combined beams were coupled into a hollow-core fiber gas cell with a low numerical aperture (N.A.) of 0.03 and a coupling efficiency >= 0.82, for gas sensing of binary compound gases of ammonia and ethylene simultaneously.

7.
Front Surg ; 9: 895025, 2022.
Article in English | MEDLINE | ID: mdl-35599793

ABSTRACT

Giant ovarian cyst itself is defined as a cyst >10 cm in diameter from radiological- examination or the size of the cyst exceeds the umbilicus. Extra-large benign and malignant cysts of the ovary are uncommon and involve diagnostic and management challenges. We present the case of a 20-year-old nulliparous woman who was referred to our center with complaints of abdominal pain and heavy breathing. She benefited from a salphingo-oophorectomy laparotomy procedure. Benign and malignant gynecologic and non-gynecologic etiologies are included in the differential diagnosis of an abdominal mass. Because of the infrequent occurrence or absence of distinctive clinical presentation of the giant ovarian cyst, accurate preoperative diagnosis is challenging.

8.
J Child Adolesc Psychiatr Nurs ; 35(3): 206-217, 2022 08.
Article in English | MEDLINE | ID: mdl-35199403

ABSTRACT

PROBLEM: High school teenagers are facing significant challenges during the COVID-19 pandemic. Teenagers are at risk of experiencing physical, mental, and social health problems due to the COVID-19 pandemic. This narrative review aims to explore the impact of COVID-19 on the emergence of mental health problems in high school adolescents. METHODS: This study employed a narrative review method. We conducted a systematic search using PRISMA on three databases: Medline, PubMed, and ScienceDirect. A total of 40 articles met the inclusion and exclusion criteria set based on the research objectives. FINDINGS: The study uncovered that high school adolescents had an increased risk of experiencing mental health problems, namely psychological distress, worry, loneliness, anxiety, depression, traumatic symptoms, other psychological disorders, suicide risk, sleep disorders, and psychosocial functioning. Anxiety, depression, and psychological stress were the most discussed mental health problems among high school adolescents during the COVID-19 pandemic. CONCLUSIONS: There is a need for efforts to identify health problems and intervene in mental health problems early in high school adolescents. Schools, mental health workers, and the government (e.g., policy stakeholders) need to implement the recommendations given as a follow-up effort for mental health services for high school youth.


Subject(s)
COVID-19 , Adolescent , Anxiety/etiology , COVID-19/epidemiology , Depression/epidemiology , Humans , Mental Health , Pandemics , SARS-CoV-2
9.
Opt Express ; 30(1): 629-640, 2022 Jan 03.
Article in English | MEDLINE | ID: mdl-35201236

ABSTRACT

We report designs and experimental demonstrations of a widely tunable single-mode quantum cascade laser array based on slot waveguide structures in the mid-infrared region. The laser array device realized a continuous tuning range of 71 cm-1 from 9.66 µm to 10.37 µm at 300 K only using the current tuning without any external heatsink temperature adjustments, in good agreement with the design. Stable single-mode operations free of undesired mode-hops have been obtained over the whole tuning range. Another slot waveguide QCL array with a 41 cm-1 continuous tuning range around 7.3 µm has also been realized with the same design principle, demonstrating the universal applicability of the array design. The broadly continuous tuning with simple processing makes the array device a suitable candidate for mid-infrared sensing and spectroscopy application.

10.
Vasc Health Risk Manag ; 17: 713-720, 2021.
Article in English | MEDLINE | ID: mdl-34824534

ABSTRACT

BACKGROUND: Postoperative cognitive dysfunction (POCD) is defined as cognitive dysfunction related to inflammation after surgical procedures, which is common following cardiac surgery. Cognitive deficits are thought to result from a systemic inflammatory response. C-reactive protein (CRP) and other proinflammatory cytokines, which are released in response to inflammation, disrupt the blood-brain barrier and neurotransmission, resulting in POCD. This study aimed to determine the correlation between POCD and increased levels of CRP in patients who had undergone heart valve replacement. METHODS: This study comprised 32 patients with normal cognitive function undergoing heart valve replacement. The CRP levels were measured before surgery and on the second postoperative day, and cognitive function was examined via the Indonesian-adapted Montreal Cognitive Assessment (MOCA-INA) on the third postoperative day. Data were analyzed using Spearman correlation test. RESULTS: Of the 32 patients, 28 (87.5%) experienced POCD. The median level of CRP was 6.6 mg/dL (interquartile range: 4.0, 8.3 g/dL). According to Spearman correlation test, increased levels of CRP were significantly related to POCD following heart valve replacement (p = 0.003, r = 0.501). The receiver operating characteristic curve indicated that the CRP cutoff level was 3.345 mg/dL, and the sensitivity and specificity were 89.3% and 75%, respectively. CONCLUSION: High expression level of CRP was correlated with POCD following heart valve replacement.


Subject(s)
Cardiac Surgical Procedures , Cognitive Dysfunction , Heart Valve Prosthesis Implantation , Receptors, Immunologic , C-Reactive Protein , Cardiac Surgical Procedures/adverse effects , Cognitive Dysfunction/diagnosis , Cognitive Dysfunction/etiology , Heart Valve Prosthesis Implantation/adverse effects , Heart Valves , Humans , Inflammation , Postoperative Complications/diagnosis , Postoperative Complications/etiology , Receptors, Immunologic/metabolism
11.
Case Rep Med ; 2021: 5554664, 2021.
Article in English | MEDLINE | ID: mdl-34567128

ABSTRACT

BACKGROUND: Acquired hemophilia A (AHA) is a potentially life-threatening autoimmune hemostatic disorder where autoantibodies that disrupt the functions of factor VIII (FVIII) are present in the circulation. The early diagnosis of AHA is difficult since the symptoms of AHA differ from those of congenital hemophilia A. Furthermore, the management of AHA is also more complex due to the presence of autoantibodies against FVIII (FVIII inhibitors). Here, we present three case reports and conduct a literature review of AHA with the aim to increase awareness and knowledge regarding the diagnosis and treatment of AHA. Case Presentations. We present three patients diagnosed with AHA in these case reports. The first patient was a young female, while the second and third patients were middle-aged and elderly males, respectively. All patients presented with a chief complaint of bruises without hemarthrosis and a history of bleeding. Laboratory examinations of the patients revealed isolated prolonged aPTT, normal PT, and the presence of autoantibodies against factor VIII, which are characteristics of AHA. Patients were then treated with corticosteroids to reduce the titer level of autoantibodies and received factor VIII transfusion to stop bleeding. CONCLUSION: AHA can be suspected in patients presenting with symptoms of bruises without hemarthrosis and without the history of bleeding. Isolated aPTT elevation with normal PT should raise high suspicion of AHA. The presence of FVIII inhibitors can help to confirm the diagnosis of AHA. Treatment consists of factor VIII transfusion and corticosteroid therapy. Bypassing agents are recommended as an alternative to FVIII transfusion.

12.
Opt Lett ; 46(11): 2670-2673, 2021 Jun 01.
Article in English | MEDLINE | ID: mdl-34061084

ABSTRACT

We present a novel, to the best of our knowledge, InGaAs/InAlAs single-photon avalanche diode (SPAD) with a triple-mesa structure. Compared with the traditional mesa structures, the horizontal distribution of the electric field decreases dramatically, while the peaks of the electric field at the mesa edges are well eliminated in the triple-mesa structure, leading to an excellent suppression of the surface leakage current and premature breakdown. Furthermore, the temperature coefficient of the breakdown voltage was measured to be as small as 37.4 mV/K within a range from 150 to 270 K. Eventually, one of the highest single-photon detection efficiencies of 35% among all the InGaAs/InAlAs SPADs with a decent dark count rate of ${3.3} \times {{10}^7}\;{\rm Hz}$ was achieved at 240 K. Combined with the inherent ease of integration of the mesa structure, this high-performance triple-mesa InGaAs/InAlAs SPAD provides an effective solution for the fabrication of SPAD arrays and the on-chip integration of quantum systems.

13.
Acta Med Indones ; 52(2): 163-171, 2020 Apr.
Article in English | MEDLINE | ID: mdl-32778631

ABSTRACT

Global widespread of current coronavirus disease 2019 (COVID-19) pandemic has emerged huge predicament to healthcare systems globally. This disease caused by a new beta-type coronavirus, known as Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2), may lead to systemic multiorgan dysfunction syndrome and subsequently cause death due to abundant angiotensin converting enzyme 2 as its functional receptors throughout body. Oncology patients even have a worse prognosis with greater infection susceptibility because they are in a state of suppression of the systemic immune system due to malignancy and anticancer therapy. This problem makes adequate and appropriate treatment urgently needed. Through randomized clinical trials, various drugs were known to have good responses in COVID-19 patients. Here, we reported a-49-year-old-woman that was confirmed for COVID-19 by clinical manifestation, radiology profile, high procalcitonin concentration, and positive polymerase chain reaction (PCR) test. The patient also had breast and thyroid cancers history and had undergone various therapeutic modalities such as chemotherapy, thyroid surgery, and breast surgery. She was undergoing hormone therapy but experiencing disease progression after achieving complete remission based on PET-CT scan 4 months before. The patient was treated with various antibiotics but showed a significant clinical improvement by administering moxifloxacin.


Subject(s)
Antineoplastic Agents/therapeutic use , Betacoronavirus/isolation & purification , Breast Neoplasms , Coronavirus Infections , Moxifloxacin/administration & dosage , Pandemics , Pneumonia, Viral , Procalcitonin/blood , Thyroid Neoplasms , Anti-Infective Agents/administration & dosage , Breast Neoplasms/epidemiology , Breast Neoplasms/pathology , Breast Neoplasms/therapy , COVID-19 , COVID-19 Testing , Clinical Laboratory Techniques/methods , Comorbidity , Coronavirus Infections/blood , Coronavirus Infections/diagnosis , Coronavirus Infections/epidemiology , Coronavirus Infections/physiopathology , Coronavirus Infections/therapy , Female , Humans , Mastectomy/methods , Middle Aged , Pneumonia, Viral/blood , Pneumonia, Viral/epidemiology , Pneumonia, Viral/physiopathology , Pneumonia, Viral/therapy , Radiography, Thoracic/methods , SARS-CoV-2 , Thyroid Neoplasms/epidemiology , Thyroid Neoplasms/pathology , Thyroid Neoplasms/therapy , Thyroidectomy/methods , Treatment Outcome
14.
Opt Express ; 26(6): 7227-7234, 2018 Mar 19.
Article in English | MEDLINE | ID: mdl-29609408

ABSTRACT

In this study, InSb p-i-n photodetectors with In0.82Al0.18Sb barrier layers were grown on a (100) 6° offcut Si substrate by heteroepitaxy via an AlSb/GaSb buffer. Based on an interfacial misfit array growth mode, the dislocations at the GaSb/Si and InSb/AlSb interfaces accommodated the lattice mismatch. The In0.82Al0.18Sb barrier layer increased the 77 K R0A of the detector. From 180 K to 300 K, the generation-recombination mechanism dominated the dark current generation in the detector and surface leakage became dominant below 120 K. The detector exhibited a 77 K responsivity of 0.475 A/W and a Johnson-noise-limited detectivity of 3.08 × 109 cmHz1/2W-1 at 5.3 µm.

15.
Opt Express ; 25(25): 31853-31862, 2017 Dec 11.
Article in English | MEDLINE | ID: mdl-29245855

ABSTRACT

Lasers monolithically integrated with high speed MOSFETs on the silicon (Si) substrate could be a key to realize low cost, low power, and high speed opto-electronic integrated circuits (OEICs). In this paper, we report the monolithic integration of InGaAs channel transistors with electrically pumped GaAs/AlGaAs lasers on the Si substrate for future advanced OEICs. The laser and transistor layers were grown on the Si substrate by molecular beam epitaxy (MBE) using direct epitaxial growth. InGaAs n-FETs with an ION/IOFF ratio of more than 106 with very low off-state leakage and a low subthreshold swing with a minimum of 82 mV/decade were realized. Electrically pumped GaAs/AlGaAs quantum well (QW) lasers with a lasing wavelength of 795 nm at room temperature were demonstrated. The overall fabrication process has a low thermal budget of no more than 400 °C.

16.
Opt Express ; 25(5): 5146-5155, 2017 Mar 06.
Article in English | MEDLINE | ID: mdl-28380779

ABSTRACT

We report the first monolithic integration of InGaAs channel field-effect transistors with InGaAs/GaAs multiple quantum wells (MQWs) lasers on a common platform, achieving a milestone in the path of enabling low power and high speed opto-electronic integrated circuits (OEICs). The III-V layers used for realizing transistors and lasers were grown epitaxially on the Ge substrate using molecular beam epitaxy (MBE). A Si-CMOS compatible process was developed to realize InGaAs n-FETs with subthreshold swing SS of 93 mV/decade, ION/IOFF ratio of more than 4 orders of magnitude with very low off-state leakage current, and a peak effective mobility of more than 2000 cm2/V·s. In addition, fabrication process uses a low overall processing temperature (≤ 400 °C) to maintain the high quality of the InGaAs/GaAs MQWs for the laser. Room temperature electrically-pumped lasers with a lasing wavelength of 1.03 µm and a linewidth of less than 1.7 nm were realized.

SELECTION OF CITATIONS
SEARCH DETAIL
...