Highly Efficient Spin-Orbit Torque Switching in Bi2Se3/Fe3GeTe2 van der Waals Heterostructures.

Topological insulators (TIs) have shown promise as a spin-generating layer to switch the magnetization state of ferromagnets via spin-orbit torque (SOT) due to charge-to-spin conversion efficiency of the TI surface states that arises from spin-momentum locking. However, when TIs are interfaced with conventional bulk ferromagnetic metals, the combination of charge transfer and hybridization can potentially destroy the spin texture and hamper the possibility of accessing the TI surface states. Here, we fabricate an all van der Waals (vdW) heterostructure consisting of molecular beam epitaxy grown bulk-insulating Bi2Se3 and exfoliated 2D metallic ferromagnet Fe3GeTe2 (FGT) with perpendicular anisotropy. By detecting the magnetization state of the FGT via anomalous Hall effect and magneto-optical Kerr effect measurements, we determine the critical switching current density for magnetization switching to be Jc ≈ 1.2 × 106 A/cm2, the lowest reported for the switching of a perpendicular anisotropy ferromagnet using Bi2Se3. From second harmonic Hall measurements, we further determine the SOT efficiency (ξDL) to be in the range of 1.8 ± 0.3 and 1.4 ± 0.08 between 5 and 150 K, comparable to the highest values reported for Bi2Se3. Our density functional theory calculations find that the weak interlayer interactions at the Bi2Se3/FGT interface lead to a weakened dipole at the interface and suppress the proximity induced magnetic moment on Bi2Se3. This enables direct access to the TI surface states contributed by the first quintuple layer, where the spins are singly degenerate with significant net in-plane spin polarization. Our results highlight the clear advantage of all-vdW heterostructures with weak interlayer interactions that can enhance SOT efficiency and minimize critical current density, an important step toward realizing next generation low-power nonvolatile memory and spintronic devices.

Emergent Moiré Phonons Due to Zone Folding in WSe2-WS2 Van der Waals Heterostructures.

Bilayers of 2D materials offer opportunities for creating devices with tunable electronic, optical, and mechanical properties. In van der Waals heterostructures (vdWHs) where the constituent monolayers have different lattice constants, a moiré superlattice forms with a length scale larger than the lattice constant of either constituent material regardless of twist angle. Here, we report the appearance of moiré Raman modes from nearly aligned WSe2-WS2 vdWHs in the range of 240-260 cm-1, which are absent in both monolayers and homobilayers of WSe2 and WS2 and in largely misaligned WSe2-WS2 vdWHs. Using first-principles calculations and geometric arguments, we show that these moiré Raman modes are a consequence of the large moiré length scale, which results in zone-folded phonon modes that are Raman active. These modes are sensitive to changes in twist angle, but notably, they occur at identical frequencies for a given small twist angle away from either the 0-degree or 60-degree aligned heterostructure. Our measurements also show a strong Raman intensity modulation in the frequency range of interest, with near 0 and near 60-degree vdWHs exhibiting a markedly different dependence on excitation energy. In near 0-degree aligned WSe2-WS2 vdWHs, a nearly complete suppression of both the moiré Raman modes and the WSe2 A1g Raman mode (∼250 cm-1) is observed when exciting with a 532 nm CW laser at room temperature. Temperature-dependent reflectance contrast measurements demonstrate the significant Raman intensity modulation arises from resonant Raman effects.

Spin-Sensitive Epitaxial In2Se3 Tunnel Barrier in In2Se3/Bi2Se3 Topological van der Waals Heterostructure.

Current-generated spin arising from spin-momentum locking in topological insulator (TI) surface states has been shown to switch the magnetization of an adjacent ferromagnet (FM) via spin-orbit torque (SOT) with a much higher efficiency than heavy metals. However, in such FM/TI heterostructures, most of the current is shunted through the FM metal due to its lower resistance, and recent calculations have also shown that topological surface states can be significantly impacted when interfaced with an FM metal such as Ni and Co. Hence, placing an insulating layer between the TI and FM will not only prevent current shunting, therefore minimizing overall power consumption, but may also help preserve the topological surface states at the interface. Here, we report the van der Waals epitaxial growth of ß-phase In2Se3 on Bi2Se3 by molecular beam epitaxy and demonstrate its spin sensitivity by the electrical detection of current-generated spin in Bi2Se3 surface states using a Fe/In2Se3 detector contact. Our density functional calculations further confirm that the linear dispersion and spin texture of the Bi2Se3 surface states are indeed preserved at the In2Se3/Bi2Se3 interface. This demonstration of an epitaxial crystalline spin-sensitive barrier that can be grown directly on Bi2Se3, and verification that it preserves the topological surface state, is electrically insulating and spin-sensitive, is an important step toward minimizing overall power consumption in SOT switching in TI/FM heterostructures in fully epitaxial topological spintronic devices.

Effect of alloying in monolayer niobium dichalcogenide superconductors.

When sulfur and silicon are incorporated in monolayer 2H-NbSe2 the superconducting transition temperature, Tc, has been found to vary non-monotonically. This was assumed to be a manifestation of fractal superconductivity. Using first-principles calculations, we show that the nonmonotonic dependence of Tc is insufficient evidence for multifractality. A unifying aspect in our study are selenium vacancies in NbSe2, which are magnetic pair-breaking defects that we propose can be present in considerable concentrations in as-grown NbSe2. We show that sulfur and silicon can occupy the selenium sites and reduce the pair-breaking effect. Furthermore, when sulfur is incorporated in NbSe2, the density of states at the Fermi level and the proximity to magnetism in the alloy are both reduced compared to the parent compound. Based on our results, we propose an alternative explanation of the non-monotonic change in Tc which does not require the conjecture of multifractality.

Metallic vs. semiconducting properties of quasi-one-dimensional tantalum selenide van der Waals nanoribbons.

We conducted a tip-enhanced Raman scattering spectroscopy (TERS) and photoluminescence (PL) study of quasi-1D TaSe3-δ nanoribbons exfoliated onto gold substrates. At a selenium deficiency of δ ∼ 0.25 (Se/Ta = 2.75), the nanoribbons exhibit a strong, broad PL peak centered around ∼920 nm (1.35 eV), suggesting their semiconducting behavior. Such nanoribbons revealed a strong TERS response under 785 nm (1.58 eV) laser excitation, allowing for their nanoscale spectroscopic imaging. Nanoribbons with a smaller selenium deficiency (Se/Ta = 2.85, δ ∼ 0.15) did not show any PL or TERS response. The confocal Raman spectra of these samples agree with the previously-reported spectra of metallic TaSe3. The differences in the optical response of the nanoribbons examined in this study suggest that even small variations in Se content can induce changes in electronic band structure, causing samples to exhibit either metallic or semiconducting character. The temperature-dependent electrical measurements of devices fabricated with both types of materials corroborate these observations. The density-functional-theory calculations revealed that substitution of an oxygen atom in a Se vacancy can result in band gap opening and thus enable the transition from a metal to a semiconductor. However, the predicted band gap is substantially smaller than that derived from the PL data. These results indicate that the properties of van der Waals materials can vary significantly depending on stoichiometry, defect types and concentration, and possibly environmental and substrate effects. In view of this finding, local probing of nanoribbon properties with TERS becomes essential to understanding such low-dimensional systems.

Nontrivial Doping Evolution of Electronic Properties in Ising-Superconducting Alloys.

Transition metal dichalcogenides offer unprecedented versatility to engineer 2D materials with tailored properties to explore novel structural and electronic phase transitions. In this work, the atomic-scale evolution of the electronic ground state of a monolayer of Nb1- δ Moδ Se2 across the entire alloy composition range (0 < δ < 1) is investigated using low-temperature (300 mK) scanning tunneling microscopy and spectroscopy (STM/STS). In particular, the atomic and electronic structure of this 2D alloy throughout the metal to semiconductor transition (monolayer NbSe2 to MoSe2 ) is studied. The measurements enable extraction of the effective doping of Mo atoms, the bandgap evolution and the band shifts, which are monotonic with δ. Furthermore, it is demonstrated that collective electronic phases (charge density wave and superconductivity) are remarkably robust against disorder and further shown that the superconducting TC changes non-monotonically with doping. This contrasting behavior in the normal and superconducting state is explained using first-principles calculations. Mo doping is shown to decrease the density of states at the Fermi level and the magnitude of pair-breaking spin fluctuations as a function of Mo content. These results paint a detailed picture of the electronic structure evolution in 2D TMD alloys, which is of utmost relevance for future 2D materials design.

Laser-Patterned Submicrometer Bi2Se3-WS2 Pixels with Tunable Circular Polarization at Room Temperature.

Characterizing and manipulating the circular polarization of light is central to numerous emerging technologies, including spintronics and quantum computing. Separately, monolayer tungsten disulfide (WS2) is a versatile material that has demonstrated promise in a variety of applications, including single photon emitters and valleytronics. Here, we demonstrate a method to tune the photoluminescence (PL) intensity (factor of ×161), peak position (38.4 meV range), circular polarization (39.4% range), and valley polarization of a Bi2Se3-WS2 2D heterostructure using a low-power laser (0.762 µW) in ambient conditions. Changes are spatially confined to the laser spot, enabling submicrometer (814 nm) features, and are long-term stable (>334 days). PL and valley polarization changes can be controllably reversed through laser exposure in a vacuum, allowing the material to be erased and reused. Atmospheric experiments and first-principles calculations indicate oxygen diffusion modulates the exciton radiative vs nonradiative recombination pathways, where oxygen absorption leads to brightening and desorption to darkening.

Stacking-dependent optical properties in bilayer WSe2.

The twist angle between the monolayers in van der Waals heterostructures provides a new degree of freedom in tuning material properties. We compare the optical properties of WSe2 homobilayers with 2H and 3R stacking using photoluminescence, Raman spectroscopy, and reflectance contrast measurements under ambient and cryogenic temperatures. Clear stacking-dependent differences are evident for all temperatures, with both photoluminescence and reflectance contrast spectra exhibiting a blue shift in spectral features in 2H compared to 3R bilayers. Density functional theory (DFT) calculations elucidate the source of the variations and the fundamental differences between 2H and 3R stackings. DFT finds larger energies for both A and B excitonic features in 2H than in 3R, consistent with experimental results. In both stacking geometries, the intensity of the dominant A1g Raman mode exhibits significant changes as a function of laser excitation wavelength. These variations in intensity are intimately linked to the stacking- and temperature-dependent optical absorption through resonant enhancement effects. The strongest enhancement is achieved when the laser excitation coincides with the C excitonic feature, leading to the largest Raman intensity under 514 nm excitation in 2H stacking and at 520 nm in 3R stacked WSe2 bilayers.

Direct-Write of Nanoscale Domains with Tunable Metamagnetic Order in FeRh Thin Films.

We have directly written nanoscale patterns of magnetic ordering in FeRh films using focused helium-ion beam irradiation. By varying the dose, we pattern arrays with metamagnetic transition temperatures that range from the as-grown film temperature to below room temperature. We employ transmission electron microscopy, X-ray diffraction, and temperature-dependent transport measurements to characterize the as-grown film, and magneto-optic Kerr effect imaging to quantify the He+ irradiation-induced changes to the magnetic order. Moreover, we demonstrate temperature-dependent optical microscopy and conductive atomic force microscopy as indirect probes of the metamagnetic transition that are sensitive to the differences in dielectric properties and electrical conductivity, respectively, of FeRh in the antiferromagnetic (AF) and ferromagnetic (FM) states. Using density functional theory, we quantify strain- and defect-induced changes in spin-flip energy to understand their influence on the metamagnetic transition temperature. This work holds promise for in-plane AF-FM spintronic devices, by reducing the need for multiple patterning steps or different materials, and potentially eliminating interfacial polarization losses due to cross material interfacial spin scattering.

Exciton Fine Structure in Perovskite Nanocrystals.

The bright emission observed in cesium lead halide perovskite nanocrystals (NCs) has recently been explained in terms of a bright exciton ground state [ Becker et al. Nature 2018 , 553 , 189 - 193 ], a claim that would make these materials the first known examples in which the exciton ground state is not an optically forbidden dark exciton. This unprecedented claim has been the subject of intense experimental investigation that has so far failed to detect the dark ground-state exciton. Here, we review the effective-mass/electron-hole exchange theory for the exciton fine structure in cubic and tetragonal CsPbBr3 NCs. In our calculations, the crystal field and the short-range electron-hole exchange constant were calculated using density functional theory together with hybrid functionals and spin-orbit coupling. Corrections associated with long-range exchange and surface image charges were calculated using measured bulk effective mass and dielectric parameters. As expected, within the context of the exchange model, we find an optically inactive ground exciton level. However, in this model, the level order for the optically active excitons in tetragonal CsPbBr3 NCs is opposite to what has been observed experimentally. An alternate explanation for the observed bright exciton level order in CsPbBr3 NCs is offered in terms of the Rashba effect, which supports the existence of a bright ground-state exciton in these NCs. The size dependence of the exciton fine structure calculated for perovskite NCs shows that the bright-dark level inversion caused by the Rashba effect is suppressed by the enhanced electron-hole exchange interaction in small NCs.

Interlayer resistance of misoriented MoS2.

Interlayer misorientation in transition metal dichalcogenides alters their interlayer distance, total energy, electronic band structure, and vibrational modes, but its effect on the interlayer resistance is not known. This study analyzes the interlayer resistance of misoriented bilayer MoS2 as a function of the misorientation angle, and it shows that interlayer misorientation exponentially increases the electron resistivity while leaving the hole resistivity almost unchanged. The physics, determined by the wave functions at the high symmetry points, are generic among the popular semiconducting transition metal dichalcogenides (TMDs). The asymmetrical effect of misorientation on the electron and hole transport may be exploited in the design and optimization of vertical transport devices such as a bipolar transistor. Density functional theory provides the interlayer coupling elements used for the resistivity calculations.

Phase Engineering of 2D Tin Sulfides.

Tin sulfides can exist in a variety of phases and polytypes due to the different oxidation states of Sn. A subset of these phases and polytypes take the form of layered 2D structures that give rise to a wide host of electronic and optical properties. Hence, achieving control over the phase, polytype, and thickness of tin sulfides is necessary to utilize this wide range of properties exhibited by the compound. This study reports on phase-selective growth of both hexagonal tin (IV) sulfide SnS2 and orthorhombic tin (II) sulfide SnS crystals with diameters of over tens of microns on SiO2 substrates through atmospheric pressure vapor-phase method in a conventional horizontal quartz tube furnace with SnO2 and S powders as the source materials. Detailed characterization of each phase of tin sulfide crystals is performed using various microscopy and spectroscopy methods, and the results are corroborated by ab initio density functional theory calculations.

Fundamentals of lateral and vertical heterojunctions of atomically thin materials.

At the turn of this century, Herbert Kroemer, the 2000 Nobel Prize winner in Physics, famously commented that "the interface is the device". This statement has since opened up unparalleled opportunities at the interface of conventional three-dimensional (3D) materials (H. Kroemer, Quasi-Electric and Quasi-Magnetic Fields in Non-Uniform Semiconductors, RCA Rev., 1957, 18, 332-342). More than a decade later, Sir Andre Geim and Irina Grigorieva presented their views on 2D heterojunctions which further cultivated broad interests in the 2D materials field. Currently, advances in two-dimensional (2D) materials enable us to deposit layered materials that are only one or few unit-cells in thickness to construct sharp in-plane and out-of-plane interfaces between dissimilar materials, and to be able to fabricate novel devices using these cutting-edge techniques. The interface alone, which traditionally dominated overall device performance, thus has now become the device itself. Fueled by recent progress in atomically thin materials, we are now at the ultimate limit of interface physics, which brings to us new and exciting opportunities, with equally demanding challenges. This paper endeavors to provide stalwarts and newcomers a perspective on recent advances in synthesis, fundamentals, applications, and future prospects of a large variety of heterojunctions of atomically thin materials.

Two step growth phenomena of molybdenum disulfide-tungsten disulfide heterostructures.

Here, we report the first demonstration of atomically thin vertically stacked MoS2/WS2 heterostructures, achieved via a two-step chemical vapour deposition (CVD) growth process. Highly ordered stacking of heterostructure domains and patterned defects have been observed. Computations based on first principles have been performed to understand observed enhanced photoluminescence of the heterostructure.

Direct bandgap transition in many-layer MoS2 by plasma-induced layer decoupling.

We report a robust method for engineering the optoelectronic properties of many-layer MoS2 using low-energy oxygen plasma treatment. Gas phase treatment of MoS2 with oxygen radicals generated in an upstream N2 -O2 plasma is shown to enhance the photoluminescence (PL) of many-layer, mechanically exfoliated MoS2 flakes by up to 20 times, without reducing the layer thickness of the material. A blueshift in the PL spectra and narrowing of linewidth are consistent with a transition of MoS2 from indirect to direct bandgap material. Atomic force microscopy and Raman spectra reveal that the flake thickness actually increases as a result of the plasma treatment, indicating an increase in the interlayer separation in MoS2 . Ab initio calculations reveal that the increased interlayer separation is sufficient to decouple the electronic states in individual layers, leading to a transition from an indirect to direct gap semiconductor. With optimized plasma treatment parameters, we observed enhanced PL signals for 32 out of 35 many-layer MoS2 flakes (2-15 layers) tested, indicating that this method is robust and scalable. Monolayer MoS2 , while direct bandgap, has a small optical density, which limits its potential use in practical devices. The results presented here provide a material with the direct bandgap of monolayer MoS2 , without reducing sample thickness, and hence optical density.

Tin disulfide-an emerging layered metal dichalcogenide semiconductor: materials properties and device characteristics.

Layered metal dichalcogenides have attracted significant interest as a family of single- and few-layer materials that show new physics and are of interest for device applications. Here, we report a comprehensive characterization of the properties of tin disulfide (SnS2), an emerging semiconducting metal dichalcogenide, down to the monolayer limit. Using flakes exfoliated from layered bulk crystals, we establish the characteristics of single- and few-layer SnS2 in optical and atomic force microscopy, Raman spectroscopy and transmission electron microscopy. Band structure measurements in conjunction with ab initio calculations and photoluminescence spectroscopy show that SnS2 is an indirect bandgap semiconductor over the entire thickness range from bulk to single-layer. Field effect transport in SnS2 supported by SiO2/Si suggests predominant scattering by centers at the support interface. Ultrathin transistors show on-off current ratios >10(6), as well as carrier mobilities up to 230 cm(2)/(V s), minimal hysteresis, and near-ideal subthreshold swing for devices screened by a high-k (deionized water) top gate. SnS2 transistors are efficient photodetectors but, similar to other metal dichalcogenides, show a relatively slow response to pulsed irradiation, likely due to adsorbate-induced long-lived extrinsic trap states.

Electronic and thermoelectric properties of few-layer transition metal dichalcogenides.

The electronic and thermoelectric properties of one to four monolayers of MoS2, MoSe2, WS2, and WSe2 are calculated. For few layer thicknesses, the near degeneracies of the conduction band K and Σ valleys and the valence band Γ and K valleys enhance the n-type and p-type thermoelectric performance. The interlayer hybridization and energy level splitting determine how the number of modes within kBT of a valley minimum changes with layer thickness. In all cases, the maximum ZT coincides with the greatest near-degeneracy within kBT of the band edge that results in the sharpest turn-on of the density of modes. The thickness at which this maximum occurs is, in general, not a monolayer. The transition from few layers to bulk is discussed. Effective masses, energy gaps, power-factors, and ZT values are tabulated for all materials and layer thicknesses.

Charge density waves in exfoliated films of van der Waals materials: evolution of Raman spectrum in TiSe2.

A number of the charge-density-wave materials reveal a transition to the macroscopic quantum state around 200 K. We used graphene-like mechanical exfoliation of TiSe(2) crystals to prepare a set of films with different thicknesses. The transition temperature to the charge-density-wave state was determined via modification of Raman spectra of TiSe(2) films. It was established that the transition temperature can increase from its bulk value to ~240 K as the thickness of the van der Waals films reduces to the nanometer range. The obtained results are important for the proposed applications of such materials in the collective-state information processing, which require room-temperature operation.