ABSTRACT
The recoveries of twenty-two organochlorine pesticides spiked in egg samples were extracted by supercritical fluid extraction (SFE) using carbon dioxide and solvent extraction using acetonitrile were compared. The extracts were cleaned up with C18 and Florisil SPE columns. At 0.1 ppm spike level, the recoveries were 52 - 100% by SFE and 53 - 93% by solvent extraction. The limits of detection calculated at 0.01 ppm spike level were 0.072 - 0.006 ppm for SFE and 0.06 - 0.006 ppm for solvent extraction. Both methods show improvement in sample preparation time and solvent consumption from the existing Soxhlet extraction method.
Subject(s)
Eggs/analysis , Food Analysis/methods , Hydrocarbons, Chlorinated , Insecticides/analysis , Animals , Chickens , SolventsSubject(s)
Edible Grain/chemistry , Glycine/analogs & derivatives , Herbicides/metabolism , Organophosphorus Compounds/metabolism , Pesticide Residues/metabolism , Absorption , Canada , Environmental Monitoring , Glycine/metabolism , Plant Oils , Random Allocation , Reference Values , Seeds/chemistry , GlyphosateABSTRACT
A postcolumn liquid chromatographic method to determine the extractable residues of glyphosate (GLYPH) and its principal metabolite, (aminomethyl)phosphonic acid (AMPA), in various cereals and beans is described. The finely ground sample is extracted with a mixture of chloroform and water, and the resulting aqueous layer is passed through a cation exchange column. The eluate is adjusted to pH 7-10 and passed through an anion exchange column. The second column is eluted with 0.3M HCl solution and the resulting acidic eluate is analyzed with liquid chromatography coupled with postcolumn fluorescence detection. The mean recoveries for GLYPH in barley, canola, dry pea, flax, soybean, wheat, and white bean ranged from 90.0 to 98.1%, with coefficients of variation (CV) from 2.9 to 10.0% and limits of detection (LOD) from 0.07 to 0.14 ppm. Similarly, mean recoveries for AMPA in the same crops ranged from 87.4 to 98.9%, with CV from 4.6 to 7.7 and LOD from 0.05 to 0.12 ppm. Using this method, an analyst can routinely analyze 6 samples per 1.5 days. The advantages of this procedure are discussed.
Subject(s)
Edible Grain/chemistry , Glycine/analogs & derivatives , Herbicides/analysis , Organophosphorus Compounds/analysis , Pesticide Residues/analysis , Seeds/chemistry , Chromatography, Liquid , Glycine/analysis , Spectrometry, Fluorescence , GlyphosateABSTRACT
A modified method is presented to determine trace quantities of N-nitrosodiethanolamine (NDElA) and N-nitrosodiisopropanolamine (NDiPlA) in the triisopropanolamine (TiPlA) formulation of a mixture of picloram and 2,4-D. Aqueous sample is extracted with dichloromethane to remove organic interferences, and then the aqueous layer is passed sequentially through chloride anion exchange column, hydrogen cation exchange column, and Clin-Elut extraction tube. The final eluate, 10% acetone in ethyl acetate, is concentrated. The isolated nitrosamines are converted to the corresponding trimethylsilyl (TMS) derivatives and determined by gas chromatography (GC) on a DB1 column coupled with a thermal energy analyzer (GC-TEA). Eight samples of commercial TiPlA formulations are analyzed. Maximum detected levels of NDElA and NDiPlA were 0.6 and 0.9 ppm, respectively, expressed relative to total weight of active ingredients. Analysis of 13 samples of herbicide DElA formulation using a previously established method and a DB225 column gave NDElA results of 0.7-6.0 ppm. NDiPlA was not detected in those samples. Results are confirmed by GC-mass spectrometry (GC/MS) with oxygen negative chemical ionization (ONCI) detection. Detection limits for both nitrosamines are 0.05 or 0.07 ng (0.1 or 0.17 ppm) for GC-TEA detection, depending on the analytical columns used, and 20 pg (0.04 ppm) for GC/MS detection. Recoveries of NDElA are 87-109% for DElA formulation spiked at 2.6 and 3.9 ppm and 90-115% for TiPlA formulation spiked at 0.2-0.3 ppm. Similarly, recoveries of NDiPlA are 95.7-100% for the DElA formulation spiked at 0.24 and 0.48 ppm, and 82-118% for the TiPlA formulation spiked at 0.2-0.3 ppm.
Subject(s)
Diethylnitrosamine/analogs & derivatives , Herbicides/analysis , Nitrosamines/analysis , Propanolamines/analysis , 2,4-Dichlorophenoxyacetic Acid/analysis , Chromatography, Gas , Diethylnitrosamine/analysis , Gas Chromatography-Mass Spectrometry , Indicators and Reagents , Picloram/analysis , Trimethylsilyl Compounds/analysisABSTRACT
A new method is described to determine trace quantities of N-nitrosodiethanolamine (NDElA) in aqueous diethanolamine (DElA) formulations and in oil solutions of dinoseb. A formate anion-exchange column is used in series with a cation-exchange column if there is DElA in the formulation. The eluate is then passed through a Clin Elut column. Depending on the concentration of NDElA in the sample, a packed silica-gel column is used to purify the extract further. This extract is analyzed on a liquid chromatograph coupled with a thermal energy analyzer (LC/TEA), using a mixture of methanol-hexane-methylene chloride containing 0.1% acetic acid (8 + 56 + 35) as the mobile phase. This solvent system gives good separation of NDElA from trace quantities of dinoseb remaining in the extract. The NDElA is also converted to the trimethylsilyl derivative and analyzed by gas chromatograph coupled with a mass spectrometer (GC/MS). Analyses of 11 commercial samples of dinoseb diethanolamine salt showed NDElA levels of 116-2409 ppm expressed relative to the weight of dinoseb. In contrast, analyses of 2 samples of organic solutions of technical dinoseb showed NDElA levels to be nondetectable and 0.3 ppm, respectively. Limit of detection by LC/TEA is 6.5 ng (0.5 ppm), and by GC/MS it is 0.02 ng (0.15 ppm). Recoveries from samples spiked at 0.514-1664 ppm range from 92.2 to 105.2%.
