ABSTRACT
Physical and chemical properties of Asian sea bass (Lates calcarifer) backbone subjected to high pressure heating (autoclaving, 121ºC) for different times (30 min; AT-30; 60 min; AT-60; 90 min; AT-90) were studied. As heating time augmented, the increases in protein, α-amino group and hydroxyproline contents in liquor were attained, while hardness was declined indicating that more organic compounds were leached out from the bone matrix. More pronounced XRD pattern was observed in backbone autoclaved for 90 min as a consequence of nano-hydroxyapatite crystals agglomeration. Extension of high-pressure heating time reduced the organic matters as elucidated by TGA and DTA data. Asian sea bass backbone heated at 121ºC for 90 min using autoclave had the lowered protein and lipid contents but increased ash content with highest calcium (29.65 ± 0.69%), phosphorus (15.80 ± 0.07%) and iron (15.10 ± 0.61 mg/kg) contents, compared to those with shorter heating time. Therefore, pre-heat treatment could reduce the organic compounds and decrease bone hardness for further process, especially for bio-calcium production.
ABSTRACT
The effects of Asian sea bass (Lates calcarifer) bio-calcium (ASBB) at different levels (0, 2, 4, 6, 8, and 10%) (w/w) on properties of threadfin bream (Nemipterus sp.) surimi gel were investigated. ASBB addition increased breaking force and deformation, while reduced expressible moisture content (p < 0.05) of surimi gel. L* (lightness), a* (redness), and b* (yellowness) values were increased with augmenting ASBB levels; however, whiteness slightly decreased in surimi gel incorporated with ASBB (p < 0.05). Higher likeness scores were noticed in surimi gel containing ASBB, compared to that of the control. However, a slight decrease in the likeness score was noticed in surimi gel with 10% (w/w) ASBB (p < 0.05). Surimi gel added with 8% (w/w) ASBB possessed the increase in breaking force by 80% from the control and had the highest likeness score. Texture profile analysis of surimi gel added with ASBB showed the improved texture characteristics with coincidentally higher storage modulus of surimi paste. Surimi gel with 8% (w/w) ASBB had a denser and finer microstructure with higher ash, calcium, and phosphorous contents, compared to the control. Thus, incorporation of bio-calcium up to 8% (w/w) not only increased mineral content, but also improved textural, sensory, and microstructural properties of surimi gel.
ABSTRACT
The effects of ultrasonication and drying method on particle size and other product characteristics of bio-calcium powder from Asian sea bass (Lates calcarifer) backbone were investigated. Ultrasonication was performed at different amplitudes (60%, 70%, and 80%) for varying periods (15 and 30 min). Ultrasonication at higher amplitudes for a longer time reduced the powder particle size more effectively (p < .05), but had no impact on zeta potential (p > .05). The bio-calcium powder ultrasonicated at 70% amplitude for 15 min had the smallest particle size (3.38 µm) when compared to the control (28.85 µm). When the ultrasonicated bio-calcium was subjected to drying, freeze-drying produced powders with higher calcium solubility but lower whiteness than hot air (tray) drying. The results suggest that the ultrasonication is a potential suitable method to reduce the size of bio-calcium powders, while the drying method slightly affected the product characteristics. The bio-calcium powder could serve as a suitable functional ingredient for food fortification aimed at improving the calcium bioavailability. Particle size of bio-calcium powder from fishbone could affect the mouth feel and calcium solubility when used for food product fortification. This work showed that ultrasonication could be used to obtain up to 10-fold reduction in the particle size of fishbone bio-calcium powders, which promotes increased calcium solubility when subjected to simulated gastrointestinal tract digestion. Few differences in characteristics of the bio-calcium powder were observed for freeze-dried and hot air-dried samples. Thus, an economical, safe, and fast process can be implemented for the production of small particle size bio-calcium powder from fishbone.
