Sulfide induced phosphate release from iron phosphates and its potential for phosphate recovery.

Sulfide is frequently suggested as a tool to release and recover phosphate from iron phosphate rich waste streams, such as sewage sludge, although systematic studies on mechanisms and efficiencies are missing. Batch experiments were conducted with different synthetic iron phosphates (purchased Fe(III)P, Fe(III)P synthesized in the lab and vivianite, Fe(II)3(PO4)2*8H2O), various sewage sludges (with different molar Fe:P ratios) and sewage sludge ash. When sulfide was added to synthetic iron phosphates (molar Fe:S = 1), phosphate release was completed within 1 h with a maximum release of 92% (vivianite), 60% (purchased Fe(III)P) and 76% (synthesized Fe(III)P). In the latter experiment, rebinding of phosphate to Fe(II) decreased net phosphate release to 56%. Prior to the re-precipitation, phosphate release was very efficient (P released/S input) because it was driven by Fe(III) reduction and not by, more sulfide demanding, FeSx formation. This was confirmed in low dose sulfide experiments without significant FeSx formation. Phosphate release from vivianite was very efficient because sulfide reacts directly (1:1) with Fe(II) to form FeSx, without Fe(III) reduction. At the same time vivianite-Fe(II) is as efficient as Fe(III) in binding phosphate. From digested sewage sludge, sulfide dissolved maximally 30% of all phosphate, from the sludge with the highest iron content which was not as high as suggested in earlier studies. Sludge dewaterability (capillary suction test, 0.13 ± 0.015 g2(s2m4)-1) dropped significantly after sulfide addition (0.06 ± 0.004 g2(s2m4)-1). Insignificant net phosphate release (1.5%) was observed from sewage sludge ash. Overall, sulfide can be a useful tool to release and recover phosphate bound to iron from sewage sludge. Drawbacks -deterioration of the dewaterability and a net phosphate release that is lower than expected-need to be investigated.

Vivianite as the main phosphate mineral in digested sewage sludge and its role for phosphate recovery.

Phosphate recovery from sewage sludge is essential in a circular economy. Currently, the main focus in centralized municipal wastewater treatment plants (MWTPs) lies on struvite recovery routes, land application of sludge or on technologies that rely on sludge incineration. These routes have several disadvantages. Our study shows that the mineral vivianite, Fe2(PO4)3 × 8H2O, is present in digested sludge and can be the major form of phosphate in the sludge. Thus, we suggest vivianite can be the nucleus for alternative phosphate recovery options. Excess and digested sewage sludge was sampled from full-scale MWTPs and analysed using x-ray diffraction (XRD), conventional scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX), environmental SEM-EDX (eSEM-EDX) and Mössbauer spectroscopy. Vivianite was observed in all plants where iron was used for phosphate removal. In excess sludge before the anaerobic digestion, ferrous iron dominated the iron pool (≥50%) as shown by Mössbauer spectroscopy. XRD and Mössbauer spectroscopy showed no clear correlation between vivianite bound phosphate versus the iron content in excess sludge. In digested sludge, ferrous iron was the dominant iron form (>85%). Phosphate bound in vivianite increased with the iron content of the digested sludge but levelled off at high iron levels. 70-90% of all phosphate was bound in vivianite in the sludge with the highest iron content (molar Fe:P = 2.5). The quantification of vivianite was difficult and bears some uncertainty probably because of the presence of impure vivianite as indicated by SEM-EDX. eSEM-EDX indicates that the vivianite occurs as relatively small (20-100 µm) but free particles. We envisage very efficient phosphate recovery technologies that separate these particles based on their magnetic properties from the complex sludge matrix.

Vivianite as an important iron phosphate precipitate in sewage treatment plants.

Iron is an important element for modern sewage treatment, inter alia to remove phosphorus from sewage. However, phosphorus recovery from iron phosphorus containing sewage sludge, without incineration, is not yet economical. We believe, increasing the knowledge about iron-phosphorus speciation in sewage sludge can help to identify new routes for phosphorus recovery. Surplus and digested sludge of two sewage treatment plants was investigated. The plants relied either solely on iron based phosphorus removal or on biological phosphorus removal supported by iron dosing. Mössbauer spectroscopy showed that vivianite and pyrite were the dominating iron compounds in the surplus and anaerobically digested sludge solids in both plants. Mössbauer spectroscopy and XRD suggested that vivianite bound phosphorus made up between 10 and 30% (in the plant relying mainly on biological removal) and between 40 and 50% of total phosphorus (in the plant that relies on iron based phosphorus removal). Furthermore, Mössbauer spectroscopy indicated that none of the samples contained a significant amount of Fe(III), even though aerated treatment stages existed and although besides Fe(II) also Fe(III) was dosed. We hypothesize that chemical/microbial Fe(III) reduction in the treatment lines is relatively quick and triggers vivianite formation. Once formed, vivianite may endure oxygenated treatment zones due to slow oxidation kinetics and due to oxygen diffusion limitations into sludge flocs. These results indicate that vivianite is the major iron phosphorus compound in sewage treatment plants with moderate iron dosing. We hypothesize that vivianite is dominating in most plants where iron is dosed for phosphorus removal which could offer new routes for phosphorus recovery.