Focal adhesion interactions with topographical structures: a novel method for immuno-SEM labelling of focal adhesions in S-phase cells.

Current understanding of the mechanisms involved in osseointegration following implantation of a biomaterial has led to adhesion quantification being implemented as an assay of cytocompatibility. Such measurement can be hindered by intra-sample variation owing to morphological changes associated with the cell cycle. Here we report on a new scanning electron microscopical method for the simultaneous immunogold labelling of cellular focal adhesions and S-phase nuclei identified by BrdU incorporation. Prior to labelling, cellular membranes are removed by tritonization and antigens of non-interest blocked by serum incubation. Adhesion plaque-associated vinculin and S-phase nuclei were both separately labelled with a 1.4 nm gold colloid and visualized by subsequent colloid enhancement via silver deposition. This study is specifically concerned with the effects microgroove topographies have on adhesion formation in S-phase osteoblasts. By combining backscattered electron (BSE) imaging with secondary electron (SE) imaging it was possible to visualize S-phase nuclei and the immunogold-labelled adhesion sites in one energy 'plane' and the underlying nanotopography in another. Osteoblast adhesion to these nanotopographies was ascertained by quantification of adhesion complex formation.

Adhesion formation of primary human osteoblasts and the functional response of mesenchymal stem cells to 330nm deep microgrooves.

The surface microtexture of an orthopaedic device can regulate cellular adhesion, a process fundamental in the initiation of osteoinduction and osteogenesis. Advances in fabrication techniques have evolved to include the field of surface modification; in particular, nanotechnology has allowed for the development of experimental nanoscale substrates for investigation into cell nanofeature interactions. Here primary human osteoblasts (HOBs) were cultured on ordered nanoscale groove/ridge arrays fabricated by photolithography. Grooves were 330nm deep and either 10, 25 or 100microm in width. Adhesion subtypes in HOBs were quantified by immunofluorescent microscopy and cell-substrate interactions were investigated via immunocytochemistry with scanning electron microscopy. To further investigate the effects of these substrates on cellular function, 1.7K gene microarray analysis was used to establish gene regulation profiles of mesenchymal stem cells cultured on these nanotopographies. Nanotopographies significantly affected the formation of focal complexes (FXs), focal adhesions (FAs) and supermature adhesions (SMAs). Planar control substrates induced widespread adhesion formation; 100microm wide groove/ridge arrays did not significantly affect adhesion formation yet induced upregulation of genes involved in skeletal development and increased osteospecific function; 25microm wide groove/ridge arrays were associated with a reduction in SMA and an increase in FX formation; and 10microm wide groove/ridge arrays significantly reduced osteoblast adhesion and induced an interplay of up- and downregulation of gene expression. This study indicates that groove/ridge topographies are important modulators of both cellular adhesion and osteospecific function and, critically, that groove/ridge width is important in determining cellular response.

The effects of nanoscale pits on primary human osteoblast adhesion formation and cellular spreading.

Current understanding of the mechanisms involved in ossesoinegration following implantation of a biomaterial has led to an emphasis being placed on the modification of material topography to control interface reactions. Recent studies have inferred nanoscale topography as an important mediator of cell adhesion and differentiation. Biomimetic strategies in orthopaedic research aim to exploit these influences to regulate cellular adhesion and subsequent bony tissue formation. Here experimental topographies of nanoscale pits demonstrating varying order have been fabricated by electron-beam lithography in (poly)carbonate. Osteoblast adhesion to these nanotopographies was ascertained by quantification of the relation between adhesion complex formation and total cell area. This study is specifically concerned with the effects these nanotopographies have on adhesion formation in S-phase osteoblasts as identified by BrdU incorporation. Nanopits were found to reduce cellular spreading and adhesion formation.

Regulation of implant surface cell adhesion: characterization and quantification of S-phase primary osteoblast adhesions on biomimetic nanoscale substrates.

Integration of an orthopedic prosthesis for bone repair must be associated with osseointegration and implant fixation, an ideal that can be approached via topographical modification of the implant/bone interface. It is thought that osteoblasts use cellular extensions to gather spatial information of the topographical surroundings prior to adhesion formation and cellular flattening. Focal adhesions (FAs) are dynamic structures associated with the actin cytoskeleton that form adhesion plaques of clustered integrin receptors that function in coupling the cell cytoskeleton to the extracellular matrix (ECM). FAs contain structural and signalling molecules crucial to cell adhesion and survival. To investigate the effects of ordered nanotopographies on osteoblast adhesion formation, primary human osteoblasts (HOBs) were cultured on experimental substrates possessing a defined array of nanoscale pits. Nickel shims of controlled nanopit dimension and configuration were fabricated by electron beam lithography and transferred to polycarbonate (PC) discs via injection molding. Nanopits measuring 120 nm diameter and 100 nm in depth with 300 nm center-center spacing were fabricated in three unique geometric conformations: square, hexagonal, and near-square (300 nm spaced pits in square pattern, but with +/-50 nm disorder). Immunofluorescent labeling of vinculin allowed HOB adhesion complexes to be visualized and quantified by image software. Perhipheral adhesions as well as those within the perinuclear region were observed, and adhesion length and number were seen to vary on nanopit substrates relative to smooth PC. S-phase cells on experimental substrates were identified with bromodeoxyuridine (BrdU) immunofluorescent detection, allowing adhesion quantification to be conducted on a uniform flattened population of cells within the S-phase of the cell cycle. Findings of this study demonstrate the disruptive effects of ordered nanopits on adhesion formation and the role the conformation of nanofeatures plays in modulating these effects. Highly ordered arrays of nanopits resulted in decreased adhesion formation and a reduction in adhesion length, while introducing a degree of controlled disorder present in near-square arrays, was shown to increase focal adhesion formation and size. HOBs were also shown to be affected morphologicaly by the presence and conformation of nanopits. Ordered arrays affected cellular spreading, and induced an elongated cellular phenotype, indicative of increased motility, while near-square nanopit symmetries induced HOB spreading. It is postulated that nanopits affect osteoblast-substrate adhesion by directly or indirectly affecting adhesion complex formation, a phenomenon dependent on nanopit dimension and conformation.

3D polymer scaffolds for tissue engineering.

This review discusses some of the most common polymer scaffold fabrication techniques used for tissue engineering applications. Although the field of scaffold fabrication is now well established and advancing at a fast rate, more progress remains to be made, especially in engineering small diameter blood vessels and providing scaffolds that can support deep tissue structures. With this in mind, we introduce two new lithographic methods that we expect to go some way to addressing this problem.

An in vivo microfabricated scaffold for tendon repair.

A new type of in vivo tissue engineering system for tendon repair in situ after cut or crush of a flexor tendon is described. The system is based on the topographical reaction, alignment, migration and perhaps proliferation of tendon cells on micrometrically grooved substrates made in a biodegradable polymer. Macrophage trapping in the structure may also help to prevent inflammation. Tendon damage including crush and section injury is a fairly frequent occurrence. The conventional treatment is surgical repair, however frequently this leads, especially in hand wounds, to attachment of the tendon surface to the surrounding synovium, which is very undesirable. We present an approach based on using a biodegradable device to ensure that the healing of severed or crushed flexor tendons is aided, synovial adhesion prevented and the final result anatomically correct. The biodegradable sheath carries microgrooves fabricated into the polymer by embossing that orient and guide the cells towards each other from either side of the region of damage. After six weeks an apparently normal functional tendon is reformed.

Making structures for cell engineering.

This is a mainly historical account of the events, methods and artifacts arising from my collaboration with Adam Curtis over the past twenty years to make exercise grounds for biological cells. Initially the structures were made in fused silica by photo-lithography and dry etching. The need to make micron-sized features in biodegradable polymers, led to the development of embossing techniques. Some cells response to grooves only a few tens of nanometers deep--this led to a desire to find the response of cells to features of nanometric size overall. Regular arrays of such features were made using electron beam lithography for definition of the pattern. Improvements were made in the lithographic techniques to allow arrays to be defined over areas bigger than 1 cm2. Structures with microelectrodes arranged inside guiding grooves to allow the formation of sparse predetermined networks of neurons were made. It is concluded that the creation of pattern, as in vivo, in assemblies of regrown cells in scaffolds may well be necessary in advanced cell engineering applications.

Cells react to nanoscale order and symmetry in their surroundings.

Mammalian cells react to microstructured surfaces, but there is little information on the reactions to nanostructured surfaces, and such as have been tested are poorly ordered or random in their structure. We now report that ordered surface arrays (orthogonal or hexagonal) of nanopits in polycaprolactone or polymethylmethacrylate have marked effects in reducing cell adhesion compared with less regular arrays or planar surfaces. The pits had diameters of 35, 75, and 120 nm, respectively, with pitch between the pits of 100, 200, and 300 nm, respectively. The cells appear to be able to distinguish between different symmetries of array. We suggest that interfacial forces may be organized by the nanostructures to affect the cells in the same way as they affect liquid crystal orientations.

Dry etching and sputtering.

Dry etching is an important process for micro- and nanofabrication. Sputtering effects can arise in two contexts within a dry-etch process. Incoming ions cause removal of volatile products that arise from the interaction between the dry-etch plasma and the surface to be etched. Also, the momentum transfer of an incoming ion can cause direct removal of the material to be etched, which is undesirable as it can cause electrical or optical damage to the underlying material. This is largely avoided in dry-etch processes by use of reactive chemistries, although in some processes this component of the etching can be significant. Etch processes, both machine type and possible etch chemistries, are reviewed. Methods of characterizing the electrical and optical damage related to ion impact at the substrate are described. The use of highly reactive chemistries and molecular constituents within the plasma is best for reducing the effects of damage.

A new design of specimen stage for in situ magnetising experiments in the transmission electron microscope.

A new stage for carrying out in situ magnetising experiments in the transmission electron microscope has been designed, constructed and tested. The principal advantages of the stage are that it delivers horizontal fields with negligible perturbation to the illumination and is suitable for operation in pulsed or continuous field mode. Details of its performance, including field calibration, are given. The paper concludes with a description of where the stage is likely to be of most use.

Effective extra-cellular recording from vertebrate neurons in culture using a new type of micro-electrode array.

We describe the fabrication and use of a new type of extracellular micro-electrode array mounted on a flexible transparent polyimide substrate that can be rapidly moved from one part of a culture of vertebrate neurons (rat nodose) to another, which permits co-culture of glia under the neurons and is easily and rapidly replaceable in the event of damage. The array can be mounted on a micromanipulator and moved into place whenever and wherever recordings with or without stimulation are needed. The basic electrode system consists of 20-30 microm diameter gold electrodes, with or without platinisation, exposed to the cells through openings in the polyimide and joined to the recording or stimulating circuitry through gold tracks embedded in the polyimide. If rigid control over neuron placement has been achieved the patterns of electrodes can be matched to the neuron positions.

Interaction of animal cells with ordered nanotopography.

Animal cells live in a complex and diverse environment where they encounter a vast amount of information, a considerable amount of which is in the nanometer range. The surface topography that a cell encounters has a role to play in influencing cell behavior. It has been demonstrated widely that surface shape can directly influence the behavior of cells. In this paper, we discuss the interactions of animal cells with engineered nanotopography, fabricated in quartz and reverse embossed into polycaprolactone, fibroblast cells show reduced adhesion to the ordered nano pits. We show that the area of cells spreading on a structured nanotopography is reduced compared with that on a planar substrate. Furthermore, cytoskeletal organization is disrupted as indicated by a marked decrease in number and size of focal contacts.

Substratum nanotopography and the adhesion of biological cells. Are symmetry or regularity of nanotopography important?

Animal cells live in environments where many of the features that surround them are on the nanoscale, for example detail on collagen molecules. Do cells react to objects of this size and if so, what features of the molecules are they responding to? Here we show, by fabricating nanometric features in silica and by casting reverse features in polycaprolactone and culturing vertebrate cells in culture upon them, that cells react in their adhesion to the features. With cliffs, adhesion is enhanced at the cliff edge, while pits or pillars in ordered arrays diminish adhesion. The results implicate ordered topography and possibly symmetry effects in the adhesion of cells. Parallel results were obtained in the adhesion of carboxylate-surfaced 2-microm-diameter particles to these surfaces. These results are in agreement with recent predictions from non-biological nanometric systems.

Reactions of cells to topography.

Though contact guidance has been known since the very early days of cell culture very little quantitative examination of the reaction of cells to topography has been made. Exceptions to this subjective approach are given prominence below. Yet if we are to understand how cells react and if we are to be able to design ideal substrata for particular cells we need this information. Precision and quantitation are required both of the methods of examination of the cells but also in the definition of that topography. Recently it has become clear that the these reactions occur at the nanometric scale and have importance for use in cellular engineering and tissue repair. Topography appears to provide a set of very powerful signals for cells.

Advantages of using microfabricated extracellular electrodes for in vitro neuronal recording.

We describe fabrication methods and the characterisation and use of extracellular microelectrode arrays for the detection of action potentials from neurons in culture. The 100 microns2 platinised gold microelectrodes in the 64 electrode array detect the external current which flows during an action potential with S:N ratios of up to 500:1, giving a maximum recorded signal of several millivolts. The performance of these electrodes is enhanced if good sealing of the cells over the electrodes is obtained and further enhanced if the electrodes and the cells lie in a deep groove in the substratum. The electrodes can be used for both recording and stimulation of activity in cultured neurons and for recording from multiple sites on a single cell. The use of such electrodes to obtain recordings from invertebrate neurons is described. The particular advantages of these electrodes, their long term stability, non-invasive nature, high packing density, and utility in stimulation, are demonstrated.

Role of the cytoskeleton in the reaction of fibroblasts to multiple grooved substrata.

The role of the cytoskeleton and cell attachments in the alignment of baby hamster kidney fibroblasts to ridge and groove substratum topography was investigated using confocal scanning microscopy. This was carried out with normal cells and cells treated with the cytoskeleton modifiers cytochalasin D, colcemid, and taxol. Actin was localised with fluorescent phalloidin. Tubulin, vinculin, and intracellular adhesion molecule-1 were visualised by indirect immunofluorescence. The spreading, elongation, and orientation of the cells after 24 h of culture in these conditions were measured on grooves of 5, 10, and 25 microns width and 0.5, 1, 2, and 5 microns depth. We have also observed events over the first 30 min of cell attachment. Five minutes after cell attachment, F-actin condensations were seen close to the intersection of groove wall and ridge top, that is, at a topographic discontinuity. The condensations were often at right angles to the groove edge and showed a periodicity of 0.6 microns. Vinculin arrangement at the early stages of cell spreading was similar to that of actin. Organisation of the microtubule system followed later, becoming obvious at about 30 min after cell plating. The Curtis and Clark theory (that cells react to topography primarily at lines of discontinuity in the substratum by actin nucleation) is supported by these results. The use of cytoskeletal poisons did not entirely abolish cell reaction to grooves. Colcemid increased cell spreading and reduced cell orientation and elongation. Cytochalasin D reduced cell spreading, orientation, and elongation. Taxol reduced cell elongation but did not affect cell spreading and orientation. We conclude that the aggregation of actin along groove/ridge boundaries is a primary driving event in determining fibroblast orientation on microgrooved substrata.

High-efficiency binary fan-out gratings by modulation of a high-frequency carrier grating.

A modulation scheme that uses pulse-position modulation of a high-frequency binary grating to increase the diffraction efficiency of the elements is presented. These elements are designed and fabricated with both one- and two-dimensional signals for operation in transmission or reflection modes in the visible and the infrared regions of the spectrum. A direct electron-beam lithography fabrication process capable of realizing features of ∼280 nm with a resolution of 15 nm is described in detail. Experimental results show that diffraction efficiencies of >80% are attainable.

Simultaneous multisite recordings and stimulation of single isolated leech neurons using planar extracellular electrode arrays.

Planar extracellular electrode arrays provide a non-toxic, non-invasive method of making long-term, multisite recordings with moderately high spatial frequency (recording sites per unit area). This paper reports advances in the use of this approach to record from and stimulate single identified leech neurons in vitro. A modified enzyme treatment allowed identified neurons to be extracted with very long processes. Multisite extracellular recordings from the processes of such isolated neurons revealed both the velocity and direction of action potential propagation. Propagation in two cell types examined was from the broken stump towards the cell body (antidromic). This was true for spontaneous action potentials, action potentials produced by injecting current into the cell body and extracellular stimulation of the extracted process via a planar extracellular electrode. These results extend previous findings which have shown that the tip of the broken stump of extracted neurons has a high density of voltage-activated sodium channels. Moreover they demonstrate the applicability of extracellular electrode arrays for recording the electrical excitability of single cells.

Cell guidance by ultrafine topography in vitro.

Laser holography and microelectronic fabrication techniques have been employed to make grating surfaces in fused quartz with ultrafine period (260 nm) in an attempt to mimic the topography of aligned fibrillar extracellular matrix (ECM), which, in the past, has been shown to affect the behaviour of cells in vitro and in vivo. The alignment of BHK cells, MDCK cells and chick embryo cerebral neurones on 260 nm period grating surfaces (130 nm grooves separated by 130 nm) of various depths (100, 210 and 400 nm) was examined. While all gratings aligned BHK cell populations, the degree of alignment was dependent on depth. The response of single MDCK cells to the grating patterns was both to align precisely to the direction of the gratings, and to elongate; only their elongation was depth-dependent. MDCK cells that were part of epithelial cell islands, and the outgrowth of neurites from chick embryo neurones, were mainly unaffected by the grating surfaces. It is clear that topography on this scale can control cell behaviour, but guidance of this type is strongly dependent on cell type and cell-cell interactions.

Topographical control of cell behaviour: II. Multiple grooved substrata.

Electronics miniaturization techniques have been used to fabricate substrata to study contact guidance of cells. Topographical guidance of three cell types (BHK, MDCK and chick embryo cerebral neurones) was examined on grooved substrata of varying dimensions (4-24 microns repeat, 0.2-1.9 microns depth). Alignment to within 10 degrees of groove direction was used as our criterion for guidance. It was found that repeat spacing had a small effect (alignment is inversely proportional to spacing) but that groove depth proved to be much more important in determining cell alignment, which increased with depth. Measurements of cell alignment and examination by scanning electron microscopy showed that BHK cells and MDCK cells interacted differently with grooved substrata, and also that the response of MDCK cells depended on whether or not the cells were isolated or part of an epithelial cell island. Guidance by a multiple topographical cue is greater than could be predicted from cells' reactions to a single cue (Clark et al. Development 99: 439-448, 1987). Substratum topography is considered to be an important cue in many developmental processes. Cellular properties such as cytoskeletal organisation, cell adhesion and the interaction with other cells are discussed as being factors determining a cells susceptibility to topography.