Nesprin-2 is a novel scaffold protein for telethonin and FHL-2 in the cardiomyocyte sarcomere.

Nesprins comprise a family of multi-isomeric scaffolding proteins, forming the linker of nucleoskeleton-and-cytoskeleton complex with lamin A/C, emerin and SUN1/2 at the nuclear envelope. Mutations in nesprin-1/-2 are associated with Emery-Dreifuss muscular dystrophy (EDMD) with conduction defects and dilated cardiomyopathy (DCM). We have previously observed sarcomeric staining of nesprin-1/-2 in cardiac and skeletal muscle, but nesprin function in this compartment remains unknown. In this study, we show that specific nesprin-2 isoforms are highly expressed in cardiac muscle and localize to the Z-disc and I band of the sarcomere. Expression of GFP-tagged nesprin-2 giant spectrin repeats 52 to 53, localized to the sarcomere of neonatal rat cardiomyocytes. Yeast two-hybrid screening of a cardiac muscle cDNA library identified telethonin and four-and-half LIM domain (FHL)-2 as potential nesprin-2 binding partners. GST pull-down and immunoprecipitation confirmed the individual interactions between nesprin-2/telethonin and nesprin-2/FHL-2, and showed that nesprin-2 and telethonin binding was dependent on telethonin phosphorylation status. Importantly, the interactions between these binding partners were impaired by mutations in nesprin-2, telethonin, and FHL-2 identified in EDMD with DCM and hypertrophic cardiomyopathy patients. These data suggest that nesprin-2 is a novel sarcomeric scaffold protein that may potentially participate in the maintenance and/or regulation of sarcomeric organization and function.

Tunable Release of Ions from Graphene Oxide Laminates for Sustained Antibacterial Activity in a Biomimetic Environment.

Silver has long been recognized for its potent antimicrobial properties, but achieving a slow and longer-term delivery of silver ions presents significant challenges. Previous efforts to control silver ion dosages have struggled to sustain release for extended periods in biomimetic environments, especially in the presence of complex proteins. This challenge is underscored by the absence of technology for sustaining antimicrobial activity, especially in the context of orthopedic implants where long-term efficacy, extending beyond 7 days, is essential. In this study, the tunable, slow, and longer-term release of silver ions from the two-dimensional (2D) nanocapillaries of graphene oxide (GO) laminates incorporated with silver ions (Ag-GO) for antimicrobial applications are successfully demonstrated. To closely mimic a physiologically relevant serum-based environment, a novel in vitro study model using 100% fetal bovine serum (FBS) is introduced as the test medium for microbiology, biocompatibility, and bioactivity studies. To emulate fluid circulation in a physiological environment, the in vitro studies are challenged with serum exchange protocols on different days. The findings show that the Ag-GO coating can sustainably release silver ions at a minimum dosage of 10 µg cm-2 day-1, providing an effective and sustained antimicrobial barrier for over ten days.

Regulation of cardiomyocyte adhesion and mechanosignalling through distinct nanoscale behaviour of integrin ligands mimicking healthy or fibrotic extracellular matrix.

The stiffness of the cardiovascular environment changes during ageing and in disease and contributes to disease incidence and progression. Changing collagen expression and cross-linking regulate the rigidity of the cardiac extracellular matrix (ECM). Additionally, basal lamina glycoproteins, especially laminin and fibronectin regulate cardiomyocyte adhesion formation, mechanics and mechanosignalling. Laminin is abundant in the healthy heart, but fibronectin is increasingly expressed in the fibrotic heart. ECM receptors are co-regulated with the changing ECM. Owing to differences in integrin dynamics, clustering and downstream adhesion formation this is expected to ultimately influence cardiomyocyte mechanosignalling; however, details remain elusive. Here, we sought to investigate how different cardiomyocyte integrin/ligand combinations affect adhesion formation, traction forces and mechanosignalling, using a combination of uniformly coated surfaces with defined stiffness, polydimethylsiloxane nanopillars, micropatterning and specifically designed bionanoarrays for precise ligand presentation. Thereby we found that the adhesion nanoscale organization, signalling and traction force generation of neonatal rat cardiomyocytes (which express both laminin and fibronectin binding integrins) are strongly dependent on the integrin/ligand combination. Together our data indicate that the presence of fibronectin in combination with the enhanced stiffness in fibrotic areas will strongly impact on the cardiomyocyte behaviour and influence disease progression. This article is part of the theme issue 'The cardiomyocyte: new revelations on the interplay between architecture and function in growth, health, and disease'.

The role of the dystrophin glycoprotein complex in muscle cell mechanotransduction.

Dystrophin is the central protein of the dystrophin-glycoprotein complex (DGC) in skeletal and heart muscle cells. Dystrophin connects the actin cytoskeleton to the extracellular matrix (ECM). Severing the link between the ECM and the intracellular cytoskeleton has a devastating impact on the homeostasis of skeletal muscle cells, leading to a range of muscular dystrophies. In addition, the loss of a functional DGC leads to progressive dilated cardiomyopathy and premature death. Dystrophin functions as a molecular spring and the DGC plays a critical role in maintaining the integrity of the sarcolemma. Additionally, evidence is accumulating, linking the DGC to mechanosignalling, albeit this role is still less understood. This review article aims at providing an up-to-date perspective on the DGC and its role in mechanotransduction. We first discuss the intricate relationship between muscle cell mechanics and function, before examining the recent research for a role of the dystrophin glycoprotein complex in mechanotransduction and maintaining the biomechanical integrity of muscle cells. Finally, we review the current literature to map out how DGC signalling intersects with mechanical signalling pathways to highlight potential future points of intervention, especially with a focus on cardiomyopathies.

Factoring in the force: A novel role for eIF6.

eIF6 is known for its role as a stimulatory translation initiation factor. In this issue, Keen et al. (2022. J. Cell Biol. https://doi.org/10.1083/jcb.202005213) identify a novel, noncanonical role, whereby eIF6 regulates focal adhesion formation, mechanosensing, and cell mechanics, independent of its translational role.

Identification of mesenchymal stromal cell survival responses to antimicrobial silver ion concentrations released from orthopaedic implants.

Antimicrobial silver (Ag+) coatings on orthopaedic implants may reduce infection rates, but should not be to the detriment of regenerative cell populations, primarily mesenchymal stem/stromal cells (MSCs). We determined intramedullary silver release profiles in vivo, which were used to test relevant Ag+ concentrations on MSC function in vitro. We measured a rapid elution of Ag+ from intramedullary pins in a rat femoral implantation model, delivering a maximum potential concentration of 7.8 µM, which was below toxic levels determined for MSCs in vitro (EC50, 33 µM). Additionally, we present in vitro data of the reduced colonisation of implants by Staphylococcus aureus. MSCs exposed to Ag+ prior to/during osteogenic differentiation were not statistically affected. Notably, at clonal density, the colony-forming capacity of MSCs was significantly reduced in the presence of 10 µM Ag+, suggesting that a subpopulation of clonal MSCs was sensitive to Ag+ exposure. At a molecular level, surviving colony-forming MSCs treated with Ag+ demonstrated a significant upregulation of components of the peroxiredoxin/thioredoxin pathway and processes involved in glutathione metabolism compared to untreated controls. Inhibition of glutathione synthesis using L-buthionine sulfoxamine eliminated MSC clonogenicity in the presence of Ag+, which was rescued by exogenous glutathione.

Extracellular chloride is required for efficient platelet aggregation.

Anion channels perform a diverse range of functions and have been implicated in ATP release, volume regulation, and phosphatidylserine exposure. Platelets have been shown to express several anion channels but their function is incompletely understood. Due to a paucity of specific pharmacological blockers, we investigated the effect of extracellular chloride substitution on platelet activation using aggregometry and flow cytometry. In the absence of extracellular chloride, we observed a modest reduction of the maximum aggregation response to thrombin or collagen-related peptide. However, the rate of aggregation was substantially reduced in a manner that was dependent on the extracellular chloride concentration and aggregation in the absence of chloride was noticeably biphasic, indicative of impaired secondary signaling. This was further investigated by targeting secondary agonists with aspirin and apyrase or by blockade of the ADP receptor P2Y12. Under these conditions, the rates of aggregation were comparable to those recorded in the absence of extracellular chloride. Finally, we assessed platelet granule release by flow cytometry and report a chloride-dependent element of alpha, but not dense, granule secretion. Taken together these data support a role for anion channels in the efficient induction of platelet activation, likely via enhancement of secondary signaling pathways.

In Vivo Correlation of Radiographic Scoring (Radiographic Union Scale for Tibia Fractures) and Biomechanical Data in a Sheep Osteotomy Model: Can We Define Union Radiographically?

OBJECTIVE: To determine (1) the reliability of the standard and modified Radiographic Union Scale for Tibia fractures (RUST) score in a sheep osteotomy model, and (2) the standard and modified RUST scores that represent biomechanical union. DESIGN: The tibia cortices in a sheep osteotomy model treated by intramedullary nails were radiographically evaluated using standard and modified RUST scores. Scores that correlated with biomechanical union, based on the torsional stiffness of the contralateral tibia, were determined. INTERVENTION: Two groups of sheep had transverse midshaft osteotomies treated with 10-mm nails after reaming to 11.5 mm. Weight-bearing was allowed as tolerated. Anteroposterior and lateral radiographs were taken at standard intervals from 4 to 12 weeks. The tibial cortices at each time interval were evaluated in a random order by 5 senior orthopaedic trauma surgeons. Each tibia was scored using the standard and modified RUST methods and was assessed for union. MAIN OUTCOME MEASURES: The intraclass correlation coefficient (ICC) was determined for standard and modified RUST scores at each time interval and for the assessment of union. The percentages of fractures that were defined as united by the surgeons were tabulated by RUST and modified RUST scores. The torsional stiffness of each tibia was tested at 12 weeks and expressed as a percentage of the contralateral side. We considered biomechanical union to be ≥90% of the torsional stiffness of the normal side. RESULTS: The modified RUST score demonstrated consistently higher ICCs than the standard RUST. All reviewers considered a standard RUST of 10 and a modified RUST of 14 to represent radiographic union. The standard RUST was 10.4 (range: 8.6-12) and modified RUST was 14.2 (range: 12.2-16) for tibiae that were biomechanically united. CONCLUSIONS: The modified RUST score has a slightly higher ICC than the standard RUST. A standard RUST of 10 and a modified RUST of 14 provide an excellent definition of union based on surgeons' opinion and biomechanical testing for a transverse fracture.

The permeability of silicone rubber to metal compounds: relevance to implanted devices.

Most implanted electrical devices use encapsulant as insulation. The encapsulant may remain functional for many years, bonded to the metallic surfaces, but eventually become partly detached allowing corrosion to occur. To understand whether the corrosion products will cause toxic effects, we need to know how quickly they will permeate through the encapsulant. In these experiments, silicone capsules (the encapsulant) containing metal compounds were left in jars of initially pure water for 6 months, and the concentration of the metal in the water was measured. The amount of metal depended on the type of compound; for the organometallic compounds tested, permeation was very rapid. However, for most of the other compounds, whether oxides or salts, the amount of metal was below the control level and therefore could have been the result of contamination. These compounds were tin sulfate and oxide (<10²), lead nitrate and oxide (<10²), copper sulfate (<10³), and nitrates of bismuth (<10¹), chrome (<10²), nickel (<10³) and zinc (<10²). The numbers in brackets are the maximum mass (ng) of permeated metal after 6 months. Three silver compounds were tested but without proper controls; however, the amount of permeated silver appeared to be low: silver oxide (1.3 × 10²), silver nitrate (6.3 × 10¹), and silver chloride (6 × 10°). The resolution of this method is limited by contamination that is detected by control capsules. The conclusion is that compounds that are likely corrosion products permeate through silicone encapsulant at a low rate and seem unlikely to cause toxic effects.

Strain response of an instrumented intramedullary nail to three-point bending.

OBJECTIVES: An experimental biomechanical evaluation of an instrumented intramedullary nail (TriGen® META Nail, Smith&Nephew®) was undertaken. The objectives were two-fold. The first was to identify the most sensitive strain gauge positions and orientations on the nail, and the second was to demonstrate that the nail was capable of detecting changes in stiffness of the nail-bone composite. The function of the instrumented nail is to quantify fracture healing objectively and directly, and so to predict delayed repair or non-union 2 months before current methods. METHODS: Eight flat pockets were machined onto the surface of the nail and three strain gauges attached in each pocket. The instrumented nail was inserted into fourth generation biomechanical grade Sawbones® tibiae with three different fracture configurations as well as into a non-fractured bone. The nail-bone composite was loaded in three-point bending at five positions to determine the strain changes in each of the eight strain gauge pockets located along the length of the nail. To simulate callus in the simplest way and to increase the stiffness of the nail-bone composite, loops of duct tape in multiples of four were applied over the fracture locus. A three-point loading jig was used to obtain the change in strain with increasing stiffness. Relative displacement of the bone ends was quantified using radiostereometric analysis. RESULTS: There was no single position of greatest strain sensitivity for all fracture types. The greatest change in strain occurred when the strain gauge pocket and fracture line were closest. Applying the loading moment directly over the strain gauge pocket also maximised its sensitivity. The duct tape callus simulation showed that the instrumented nail was able to detect a change in stiffness of less than 4.1 Nm/°. CONCLUSIONS: It has been shown that the instrumented nail can detect physiologically relevant changes in stiffness, and so to provide a useful function as an objective monitor of fracture repair.

A single-channel telemetric intramedullary nail for in vivo measurement of fracture healing.

OBJECTIVE: The objective of this study was to develop a single-channel telemetric intramedullary nail that measures anterior-posterior bending strains and determine whether these forces decrease sigmoidally when normalized to the ground reaction force during fracture healing. METHODS: A transverse midshaft femoral osteotomy (1 mm) was stabilized using a customized TriGen intramedullary nail incorporating a strain gauge in the anterior-posterior plane. Fourteen skeletally mature sheep (2-3 years old) were treated in two pilot studies (n = 3/pilot) and a pivotal study (n = 8). Three animals were excluded as a result of welfare issues. Static strain measurements were acquired at approximately 130 Hz during leg stance. In vivo gait analysis was carried out weekly to assess ground reaction forces and biweekly x-rays to assess stability and fracture healing. Animals were euthanized 12 weeks postoperatively. Callus formation was assessed by microcomputed tomography and histomorphometry. The degree of load share between bone and the nail was determined postmortem by three-point bending. RESULTS: A significant preload was generated during implantation, most notably during placement of the four interlocking screws and by the action of attached soft tissues. Eight animals showed evidence of bone healing by x-ray, microcomputed tomography, and histology. However, a reduction in implant load was only observed with two of the eight. The degree of load sharing observed in vivo in these animals (50%-75%) compared favorably with the in vitro observations (approximately 50%). In the nonhealing ambulating animals, nail forces did not change over time. Three-point bend tests carried out on "healed" femurs suggested that load sharing between the bone and nail could be detected more easily in the absence of soft tissues. CONCLUSION: No clear correlation between implant strain and fracture healing was observed using the single-channel system when subjected to one external loading regime (leg stance phase). However, ex vivo biomechanical testing demonstrated that load share changes could be detected when loads were directly applied to the bone in the absence of muscle and ligament forces. These data emphasize the need to fully characterize the complex biomechanical environment of the limb to determine the load changes resulting from fracture healing.

The effect of gas plasma modification on platelet and contact phase activation processes.

Medical-grade polytetrafluoroethylene (PTFE), polydimethylsiloxane (PDMS), polyetherurethane (PEU) and ultrahigh molecular weight polyethylene (UHMWPE) were plasma treated with O2, Ar, N2 and NH3. Their surface properties were characterised using X-ray photoelectron spectroscopy (XPS), static secondary ion mass spectroscopy (SSIMS), atomic force microscopy (AFM) and dynamic contact angle (DCA) analysis. Platelet adhesion, aggregation, activation and release of microparticles were determined after contact with whole blood in a cone and plate viscometer. Activation of the coagulation system was quantified in a static environment using a partial thromboplastin time (PTT) assay. The chemical compositions of the untreated surfaces were found to be very similar to those of the bulk material except for PEU, whose surface was comprised almost entirely of soft ether segments. For all materials, the different plasma treatments resulted in moderate etching with the incorporation of functional groups and removal of side groups: defluorination, dehydrogenation, cleavage of methyl side groups and soft segments for PTFE, UHMWPE, PDMS and PEU, respectively. Consequently, plasma treatment resulted in increased wettability in all cases. Blood contact with the virgin materials resulted in activation of platelets and the clotting cascade. Plasma treatment resulted in a significant reduction in platelet adhesion for all materials and all treatments. In the case of PTFE and PEU, the activation status of these cells was also reduced. Plasma treatment of all materials reduced fluid-phase CD62P expression. Platelet aggregate size correlated well with degree of aggregate formation, but many treatments increased the degree of aggregation, as was the case for microparticle shedding. There was no correlation between CD62P expression, aggregate formation and platelet microparticle (PMP) shedding. It is concluded that despite incorporation of the same chemical groups, the pattern of response to blood in vitro is not the same across different polymers.

Characterisation of electrospun polystyrene scaffolds for three-dimensional in vitro biological studies.

The purpose of this study was to produce a well-characterised electrospun polystyrene scaffold which could be used routinely for three-dimensional (3D) cell culture experimentation. A linear relationship (p<0.01) between three principal process variables (applied voltage, working distance and polymer concentration) and fibre diameter was reliably established enabling a mathematical model to be developed to standardise the electrospinning process. Surface chemistry and bulk architecture were manipulated to increase wetting and handling characteristics, respectively. X-ray photoelectron spectroscopy (XPS) confirmed the presence of oxygen-containing groups after argon plasma treatment, resulting in a similar surface chemistry to treated tissue culture plastic. The bulk architecture of the scaffolds was characterised by scanning electron microscopy (SEM) to assess the alignment of both random and aligned electrospun fibres, which were calculated to be 0.15 and 0.66, respectively. This compared to 0.51 for collagen fibres associated with native tissue. Tensile strength and strain of approximately of 0.15 MPa and 2.5%, respectively, allowed the scaffolds to be routinely handled for tissue culture purposes. The efficiency of attachment of smooth muscle cells to electrospun scaffolds was assessed using a modified 3-[4,5-dimethyl(thiazol-2yl)-3,5-diphery] tetrazolium bromide assay and cell morphology was assessed by phalloidin-FITC staining of F-actin. Argon plasma treatment of electrospun polystyrene scaffold resulted in significantly increased cell attachment (p<0.05). The alignment factors of the actin filaments were 0.19 and 0.74 for the random and aligned scaffold respectively, compared to 0.51 for the native tissue. The data suggests that electrospinning of polystyrene generates 3D scaffolds which complement polystyrene used in 2D cell culture systems.

Costimulatory molecule immune enhancement in a plasmid vaccine model is regulated in part through the Ig constant-like domain of CD80/86.

There is great interest in understanding the role of costimulatory molecules in immune activation. In both the influenza and HIV DNA immunization models, several groups have reported that coimmunization of mice with plasmids encoding immunogen and CD86, but not CD80, effectively boosts Ag-specific T cell activation. This difference in immune priming provided an opportunity to examine the functional importance of different regions of the B.7 molecules in immune activation. To examine this issue, we developed a series of chimeric CD80 and CD86 constructs as well as deletion mutants, and examined their immune activating potential in the DNA vaccine model. We demonstrate that the lack of an Ig constant-like region in the CD80 molecule is critically important to the enhanced immune activation observed. CD80 C-domain deletion mutants induce a highly inflammatory Ag-specific cellular response when administered as part of a plasmid vaccine. The data suggest that the constant-like domains, likely through intermolecular interactions, are critically important for immune regulation during costimulation and that engineered CD80/86 molecules represent more potent costimulatory molecules and may improve vaccine adjuvant efficacy.

Functional characterization of human NBC4 as an electrogenic Na+-HCO cotransporter (NBCe2).

We have functionally characterized Na+-driven bicarbonate transporter (NBC)4, originally cloned from human heart by Pushkin et al. (Pushkin A, Abuladze N, Newman D, Lee I, Xu G, and Kurtz I. Biochem Biophys Acta 1493: 215-218, 2000). Of the four NBC4 variants currently present in GenBank, our own cloning efforts yielded only variant c. We expressed NBC4c (GenBank accession no. AF293337) in Xenopus laevis oocytes and assayed membrane potential (Vm) and pH regulatory function with microelectrodes. Exposing an NBC4c-expressing oocyte to a solution containing 5% CO2 and 33 mM HCO elicited a large hyperpolarization, indicating that the transporter is electrogenic. The initial CO2-induced decrease in intracellular pH (pH(i)) was followed by a slow recovery that was reversed by removing external Na+. Two-electrode voltage clamp of NBC4c-expressing oocytes revealed large HCO- and Na+-dependent currents. When we voltage clamped V(m) far from NBC4c's estimated reversal potential (E(rev)), the pH(i) recovery rate increased substantially. Both the currents and pH(i) recovery were blocked by 200 microM 4,4'-diisothiocyanostilbene-2,2'-disulfonic acid (DIDS). We estimated the transporter's HCO:Na+ stoichiometry by measuring E(rev) at different extracellular Na+ concentration ([Na+]o) values. A plot of E(rev) against log[Na+]o was linear, with a slope of 54.8 mV/log[Na+]o. This observation, as well as the absolute E(rev) values, are consistent with a 2:1 stoichiometry. In conclusion, the behavior of NBC4c, which we propose to call NBCe2-c, is similar to that of NBCe1, the first electrogenic NBC.