The Impact of Epidural Analgesia on Immobility and extended Hospital Stay After Periacetabular Osteotomy.

AIMS: Early mobilisation after periacetabular osteotomy (PAO) represents an important goal after surgery. The purpose of this study was to determine whether the use of epidural aznalgesia (EA) is associated with prolonged immobility and an increased length of stay (LOS) after PAO surgery. METHODS: From January 2022 to July 2023, the study included a cohort of 150 PAO procedures all performed by the same surgeon (SSA). Patients were categorized into two distinct groups: those who received epidural analgesia (EA) (79 PAOs) and those who did not receive EA (71 PAOs). "Ready for discharge" was defined as the ability to ascend and descend a standardized flight of stairs independently. Multivariable linear regression was used to identify additional factors influencing LOS after PAO. RESULTS: Patients in the EA group were ready for discharge 5.95 ± 2.09 days after surgery which was significantly longer than in the No EA group´s average of 4.18 days ± 2.5, (p < 0.001). While the reduction in the number of patients experiencing pulmonary embolism in the No EA group did not reach statistical significance, it still demonstrated a relevant decrease from two patients within the EA group (2.53%) to 0 (0%) in the No EA group. The active engagement of the surgeon in mobilising patients led to a substantial reduction in LOS, decreasing it from 5.81 ± 2.18 days to 2.2 ± 0.77 days (p < 0.001). Multivariable analysis revealed five independent factors influencing the LOS following PAO which included absence of EA, surgeon-led mobilisation within 24 h after surgery, postoperative hemoglobin levels, BMI, and prior experience with PAO surgery on the contralateral side. CONCLUSIONS: Opting against the use of EA in patients undergoing PAO is advisable, as it will result in extended postoperative immobility and the associated risks. Additionally, the active participation of the surgeon in the mobilisation process is strongly recommended.

Unveiling the learning curve of periacetabular osteotomy.

Aims: Periacetabular osteotomy (PAO) is widely recognized as a demanding surgical procedure for acetabular reorientation. Reports about the learning curve have primarily focused on complication rates during the initial learning phase. Therefore, our aim was to assess the PAO learning curve from an analytical perspective by determining the number of PAOs required for the duration of surgery to plateau and the accuracy to improve. Methods: The study included 118 consecutive PAOs in 106 patients. Of these, 28 were male (23.7%) and 90 were female (76.3%). The primary endpoint was surgical time. Secondary outcome measures included radiological parameters. Cumulative summation analysis was used to determine changes in surgical duration. A multivariate linear regression model was used to identify independent factors influencing surgical time. Results: The learning curve in this series was 26 PAOs in a period of six months. After 26 PAO procedures, a significant drop in surgical time was observed and a plateau was also achieved. The mean duration of surgery during the learning curve was 103.8 minutes (SD 33.2), and 69.7 minutes (SD 18.6) thereafter (p < 0.001). Radiological correction of acetabular retroversion showed a significant improvement after having performed a total of 93 PAOs, including anteverting PAOs on 35 hips with a retroverted acetabular morphology (p = 0.005). Several factors were identified as independent variables influencing duration of surgery, including patient weight (ß = 0.5 (95% confidence interval (CI) 0.2 to 0.7); p < 0.001), learning curve procedure phase of 26 procedures (ß = 34.0 (95% CI 24.3 to 43.8); p < 0.001), and the degree of lateral correction expressed as the change in the lateral centre-edge angle (ß = 0.7 (95% CI 0.001 to 1.3); p = 0.048). Conclusion: The learning curve for PAO surgery requires extensive surgical training at a high-volume centre, with a minimum of 50 PAOs per surgeon per year. This study defined a cut-off value of 26 PAO procedures, after which a significant drop in surgical duration occurred. Furthermore, it was observed that a retroverted morphology of the acetabulum required a greater number of procedures to acquire proficiency in consistently eliminating the crossover sign. These findings are relevant for fellows and fellowship programme directors in establishing the extent of training required to impart competence in PAO.

Higher satisfaction and function scores in restricted kinematic alignment versus mechanical alignment with medial pivot design total knee arthroplasty: A prospective randomised controlled trial.

PURPOSE: Restricted kinematic alignment (rKA) in total knee arthroplasty (TKA) and medial pivot (MP) knee designs already showed superior outcomes in independent comparative studies. The objective of this study was to assess whether rKA with MP TKA provides better clinical and functional outcomes compared to mechanical alignment (MA) with MP TKA. METHODS: This is a randomised, parallel two group study involving a total of 98 patients with end-stage knee osteoarthritis. Patients were randomly allocated to either rKA or MA TKA procedures conducted with a MP prothesis using patient-specific instruments between 2017 and 2020. Final follow-up was at 2 years postoperatively. Demographic data and clinical and functional scores (Oxford knee score, knee society score [KSS], Western Ontario and McMaster Universities Osteoarthritis Index [WOMAC], forgotten joint score [FJS]) were collected and compared preoperative, 1 year postoperative and 2 years postoperative. Coronal plane alignment of the knee and functional knee phenotype classification were recorded. RESULTS: A total of 47 patients (rKA) and 51 patients (MA) were included in final analysis. Superior joint awareness scores (FJS) were found at 1 year postoperative for rKA (62.2 vs. 52.4, p = 0.04). KSS subscores (expectation score, satisfaction score) improved with rKA with significant differences at both 1 and 2 years postoperatively. Major differences between rKA and MA were found in subgroup analysis of varus and neutral CPAK phenotypes. Both 1 year and 2 years postoperatively, FJS was significantly better in KA compared with MA in varus CPAK phenotypes (63.1 vs. 44.9, p = 0.03; 71.1 vs. 46.0, p = 0.005). Further clinical and functional scores showed improvement in the varus CPAK phenotypes with predominantly significant improvement in the expectation and satisfaction KSS subscores. No significant differences were found in the comparison of rKA and MA in neutral CPAK phenotypes. CONCLUSION: The rKA of MP TKA design shows superior patient satisfaction and self-reported function when compared to MA MP TKA. Furthermore, rKA MP TKA shows superior joint awareness at early postoperative stage. The most important clinical relevance of this study is the clear superiority of rKA in varus phenotypes. LEVEL OF EVIDENCE: Level II.

Very early migration of a calcar-guided short stem: a randomized study of early mobilization and the influence of a calcium phosphate coating with 60 patients.

This study analyzed the migration of a calcar-guided short stem to determine the course of very early migration, as well as evaluated the effect of an additional calcium phosphate (CP) coating on a titanium plasma spray (TPS) coating, which has not been analyzed previously. Sixty patients were enrolled in this study and were treated with the A2 calcar-guided short stem. The implant coating was randomized with either the TPS or an additional CP coating, and radiostereometric analysis was performed with the baseline measurement before initial weight-bearing, along with follow-up examinations at 1 week, 6 weeks, 3 months, and 6 months. Implant migrations were 0.27 mm (standard deviation [SD], 0.13 mm) and 0.74 mm (SD, 1.11 mm) at 1 week and 6 months post-surgery, respectively, and 65% and 87% of the implants reached their final position 1 week and 6 weeks after surgery, respectively. After 6 weeks, 3 months, and 6 months, a significant increase was noted in the migration of the CP coating group vs. that of the TPS coating group. Upon the final observation at 6 months, the groups displayed on average a 0.74-mm migration. Most of the analyzed implants ceased migration within the first week post-surgery, but the CP coating demonstrated a higher and more prolonged migration compared to the TPS coating.

[Evaluation of care for slipped capital femoral epiphysis (SCFE) in Germany]. / Analyse der Versorgungssituation bei Epiphyseolysis capitis femoris (ECF) in Deutschland.

INTRODUCTION: The treatment concept for slipped capital femoral epiphysis is still controversial. According to studies, there is currently no recommendation for a universal approach. Therefore, the aim of this study is to analyze the care reality of children with ECF in Germany. METHODS: The evaluation of the study is performed based on a questionnaire sent to physicians tending to ECF in 2021. Data is compared to the literature. RESULTS: 36 of 47 questionnaires sent out were included. Overall, no significant difference in ECF care was proven in terms of annual caseload or the size of hospital. CONCLUSION: A high variance in operative SCFE treatment is reported. According to current literature, the modified Dunn procedure is considered the best therapeutic option to date, especially for patients with severe or chronic ECF. However, compared with alternative care options, this is not feasible in every hospital due to its complicating and challenging nature. Central registration, minimum volume regulation, and expansion of continuing education measures can contribute to optimization.

Contribution of various forefoot areas to push-off peak at different speeds and slopes during walking.

BACKGROUND: Push-off during the terminal stance phase has a major impact on forward progression during walking. During this phase, the ground reaction force is applied to a small area under the forefoot. A better understanding of how single forefoot areas contribute to push-off peak in healthy subjects is needed to develop biomimetic orthopedic devices for forefoot amputees. RESEARCH QUESTION: What is the contribution of different forefoot sole areas to push-off peak as a function of speed and slope? METHODS: In this analytical study, 15 healthy subjects walked on a treadmill at different speeds (0.8 m/s; 1.2 m/s; 1.6 m/s; max. gait speed) without de-/inclination and on different slopes (-10°; -5°; 0°; 5°; 10°) with normal walking speed. The Novel Pedar-X System was used to measure vertical sole force. Push-off peak of the entire sole was determined and relative contributions of the areas under the hallux, first ray, and toes (I-V) were calculated and analyzed using separate repeated-measures ANOVA (α = 0.05). RESULTS: Push-off peak increases with faster walking speeds as well as with 10° inclination. Downhill walking is associated with a reduced push-off peak. The contribution of all forefoot areas increases with faster walking speeds and at a declination of -10°. Push-off contribution of the area under the hallux increases by about 64.6% at fast walking compared to slow walking and this increase is higher than that of the area under the first ray and toes (p < 0.05). SIGNIFICANCE: These findings indicate the major role of the hallux in speed generation and the importance of the forefoot during downhill walking. The results show the need for an adequate assistive device even in hallux amputation cases to compensate for deficits in the push-off phase.

What do users and their aiding professionals want from future devices in upper limb prosthetics? A focus group study.

BACKGROUND: High rejection rates of upper limb prosthetics indicate that current prosthetic devices only partially meet user demands. This study therefore investigated the benefits and challenges with current prostheses, associated services and potential areas for improvement from the perspective of upper limb prosthesis users and various professionals working in the field of upper limb and hand prosthetics. METHODS AND FINDINGS: Seven different focus group discussions were conducted with 32 participants. Participants were grouped by prosthesis type, if they were prosthesis users, or professionals. All focus group discussions were transcribed verbatim, and a summarizing content analysis was performed. Three main topic areas to be addressed emerged from the interviews: 1. a properly functioning prosthesis, 2. the infrastructure, and 3. users' psychological and physical prerequisites. The interaction between a well-functioning prosthesis and a well-developed infrastructure was shown to be important for successful use. CONCLUSIONS: Our study raises many of the same issues that have been reported in previous qualitative studies, dating back over several decades. This study underlines the need to include users and professionals in the future development of prosthetic devices.

Implications of ageing effects on thermal and mechanical properties of PMMA-based bone cement for THA revision surgery.

Loosening and infection are the main reasons for revision surgery in total hip arthroplasty (THA). Removing partially detached cemented implant components during revision surgery remains challenging and poses the risk of periprosthetic bone damage. A promising approach for a gentler removal of partially detached prostheses involves softening the PMMA-based bone cement by heating it above its glass transition temperature (TG), thus loosening the implant-cement bond. It is assumed that the TG of PMMA-based bone cement decreases in-vivo due to the gradual absorption of body fluid. Reliable data on TG are essential to develop a heat-based method for removing cemented implant components during revision surgery. The effect of water absorption was investigated in-vitro by ageing PMMA-based bone cement samples for different periods up to 56 days in both Ringer's solution (37 °C) and air (37 °C and 30% humidity). Subsequently, the TG and Vicat softening temperatures of the samples were determined by differential scanning calorimetry and Vicat tests, respectively, according to prescribed methods. Over the entire ageing period, i.e. comparing one day of ageing in air and 56 days in Ringer's solution, the Vicat softening temperature dropped by 16 °C, while the TG dropped by 10 °C for Palacos® R PMMA-based bone cement. Water absorption over time correlated significantly with the Vicat softening temperature until saturation of the PMMA-based bone cement was reached. Based on the TG and Vicat softening temperature measurements, it can be assumed that in body-aged bone cement, an optimal softening can be achieved within a temperature range of 85 °C-93 °C to loosen the bond between the PMMA-based bone cement mantle and the prosthesis stem. These findings may pave the way for a gentler removal of the implant in revision THA.

Accuracy of Positioning and Risk Factors for Malpositioning Custom-Made Femoral Stems in Total Hip Arthroplasty-A Retrospective Multicenter Analysis.

Total hip arthroplasty (THA) is commonly performed using off-the-shelf implants. In the case of a severe mismatch between the anatomy of the proximal femur and the geometry of the stem, the use of custom-made stems might become necessary. The goal of this study was to investigate the precision of the implantation of custom-made stems of one manufacturer (CTX stem, AQ Implants) and to determine risk factors for malpositioning. All patients receiving a custom-made CTX stem between 2014 and 2020 at six high-volume academic centers were retrospectively recruited. The achieved position of the stem, as determined by stem version, stem coronal angle, and implantation depth on radiographs, was compared to the plan. The influence of radiographic and demographic parameters on the position was investigated. The results revealed a high variability of the achieved implant position in relation to the preoperative plan. While the stem coronal angle only differed slightly from the intended position, the stem version and the implantation depth showed a high frequency and amount of deviation. Right stems showed significantly higher positions than planned. Surgeons must be aware of this potential problem when implanting custom-made stems.

Fifty percent of patients undergoing periacetabular osteotomy for hip dysplasia showed normal findings upon neonatal ultrasound screening : Symptomatic hip dysplasia in adulthood despite inconspicuous neonatal hip ultrasound.

Developmental dysplasia of the hip (DDH) is characterized by the pathomorphology of inadequate acetabular coverage of the femoral head leading to increased loading of the articular surface and acetabular rim. If left untreated, this ultimately leads to osteoarthritis. Germany introduced a nationwide universal ultrasound screening program for all newborn infants in 1996. Subsequently, the incidence of undiagnosed hip dislocation was significantly reduced. In this consecutive series of patients who underwent periacetabular osteotomy for the treatment of symptomatic dysplasia of the hip between October 2014 and October 2022 data regarding the U3 screening examination were analyzed. The data included whether the examination was performed, whether the findings were positive or negative, whether the patients underwent any form of treatment in the case of a positive finding and whether a control X­ray was performed. This study provides evidence that acetabular undercoverage cannot be ruled out based on a normal finding in ultrasonography screening. Furthermore, the study also shows that residual dysplasia may persist despite attempts of conservative treatment.

Comparable accuracy of femoral joint line reconstruction in different kinematic and functional alignment techniques.

PURPOSE: A key part of kinematic alignment (KA) and functional alignment (FA) is to restore the natural femoral joint line, in particular the medial joint line. KA is known to reproduce the femoral joint line accurately; however, direct comparisons with other surgical techniques such as FA are currently lacking. The purpose of this study was to evaluate differences of alignment parameters in KA and FA techniques with a special focus given to the femoral joint line. METHODS: We performed a retrospective radiological analysis of pre- and postoperative long leg radiographs of 221 consecutive patients with varus or neutral leg alignment, who underwent primary total knee arthroplasty (TKA) procedures from 2018 to 2020. Patients were assigned to one of four groups: (1) FA: image-based robotic-assisted TKA, (2) FA: imageless robotic-assisted TKA, (3): restricted KA: 3D cutting block-assisted (patient-specific instruments, PSI) TKA, (4): unrestricted KA: calipered technique. Patients' radiographs were (re)-analyzed for overall limb alignment, medial proximal tibial angle (MPTA), lateral distal femoral angle (LDFA), as well as medial and lateral femoral joint line alteration. Statistical significance was determined using unpaired t testing (FA vs. KA group) and one-way ANOVA (subgroup analyses). RESULTS: Comparisons of KA vs. FA, as well as individual subgroups of KA and FA did not show any differences in the accuracy of medial joint line reconstruction (< 2 mm, p = 0.384, p = 0.744, respectively) and LDFA alteration (< 2°, p = 0.997, 0.921, respectively). Correction of MPTA (3.4° vs. 2.2°) and lateral femoral joint line (2.1 mm vs. 1.5 mm) was higher for FA and FA subgroups compared to KA and KA subgroups (both p < 0.001). CONCLUSION: Kinematic and functional alignments showed a comparable accuracy in reconstruction of the medial femoral joint line and femoral joint line orientation. Increased correction of MPTA and lateral femoral joint line was recorded with FA techniques. LEVEL OF EVIDENCE: III.

[Kinematic Alignment of Total Knee Arthroplasty]. / Kinematisches Alignment bei der Knie-TEP-Implantation.

Nowadays, kinematic alignment is a widely used alignment philosophy in total knee arthroplasty. The concept of kinematic alignment respects the patient's individual prearthrotic anatomy and is based on the reconstruction of the femoral anatomy and thus the axes of motion of the knee joint. Only then the alignment of the tibial component is adapted to the femoral component. By means of this technique soft tissue balancing is reduced to a minimum. Due to the risk of excessive outlier alignment technical assistance or calipered techniques are recommended for precise implementation. This article attempts to provide an understanding of the fundamentals of kinematic alignment, and it focusses on how it differs from alternative alignment strategies and the way the philosophy is implemented in different surgical techniques.

The Female Pelvis Is Associated with a Lateralized Ischium and a Reduced Ischiofemoral Space.

BACKGROUND: Pelvi-femoral conflicts are increasingly recognized for their explanatory role in the pathology of extra-articular hip impingement. Ischiofemoral impingement (IFI) is a type of impingement between the femur and the ischium that causes high femoral antetorsion and valgus femoral neck orientation. It is unknown whether obstetric adaptation of the female pelvis renders the female hip at a higher risk of sustaining IFI. The aim of this study was to determine the influence of the pelvic morphology on the ischiofemoral space (IFS). METHODS: Plain radiographs of healthy individuals with no symptomatic hip disease were obtained in a functional standing position in a standardized manner and utilized for measurement of the interischial and ischiofemoral widths, subpubic angle, and centrum collum diaphyseal (CCD) angle. Linear regression was performed to determine the influence of morphometric measures on the ischiofemoral space. RESULTS: Sixty-five radiographs (34 females and 31 males) were included. The cohort was stratified according to gender. Significant gender-related differences were noted regarding the ischiofemoral distance (31% increase in males, p < 0.001), pubic-arc angle (30% increased in females, p < 0.001), and the interischial space (7% increase in females, p < 0.001). CCD did not significantly differ between genders (p = 0.2). Factors influencing the IFS include the pubic-arc angle (ß = -0.01 (CI -0.02--0.00), p = 0.003), interischial distance (ß = -0.11 (CI -0.23--0.00), p = 0.049) and CCD (ß = -0.06 (CI -0.09--0.04), p < 0.001). CONCLUSIONS: Obstetric adaptation is associated with an increased subpubic angle that shifts the ischia laterally and away from the symphysis. The resultant reduction in the ischiofemoral space renders the female pelvis at a higher risk for a pelvi-femoral conflict, or more precisely, an ischiofemoral conflict, due to the reduced ischiofemoral space of the hip. The CCD angle of the femur was shown not to be gender specific. However, the CCD angle demonstrates an influence on the ischiofemoral space, rendering the proximal femur a target for corresponding osteotomies.

Noise exposure during robot-assisted total knee arthroplasty.

The aim of the study was to examine the noise exposure for operating theater staff during total knee arthroplasty (TKA) with three different robot systems. There is already evidence that noise exposure during TKA performed manually exceeds recommended guidelines for occupational noise. Therefore, if surgical staff is exposed to it for several years, the development of noise-inducing hearing loss (NIHL) is significantly increased. To investigate the noise exposure during robot-assisted TKA, the study measured the average noise and the peak sound pressure during TKA with MAKO robot (Stryker, Kalamazoo, Michigan, United States), NAVIO robot (Smith and Nephew, London, Great Britain), and CORI robot (Smith and Nephew, London, Great Britain) using a class 1 sound level meter. Each robot system exceeds the recommended guidelines from the national institute for occupational safety and health. While the MAKO robot had the highest average sound level (93.18 dB(A)) of the three robot systems (NAVIO: 88.88 dB(A), CORI: 89.38 dB(A)), the peak sound level was the highest with the NAVIO Robot (134.48 dB(C)) compared to the MAKO Robot (128.98 dB(C)) and CORI robot (126.48 dB(C)). Robot-assisted TKA is a risk factor for NIHL, like manually performed TKA. Further research for decreasing the noise exposure during TKA is needed to minimize the hearing loss in operating theater staff.

Why Is There a Range in Time Returning to Preoperative Activity Habits After Femoroacetabular Impingement Treatment in Recreational Athletes?

CONTEXT: Professional athletes showed excellent results after hip preserving procedures. However, there is still a lack of knowledge regarding the rate of return to activity and the rehabilitation time of recreational athletes. Thus, the aim of this study was to investigate factors that were associated with an extended return-to-activity time in nonprofessional athletes. DESIGN: Retrospective, quantitative case-control study. METHODS: This study included 47 cases (45 nonprofessional athletes), which were divided according to return-to-activity time (short term: 0.0-7.0 mo vs long term: >7.0 mo). The clinical outcome were evaluated with the modified Harris hip score, the nonarthritic hip score, the Western Ontario and McMaster Universities Osteoarthritis Index, and the University of California, Los Angeles activity score. For statistical analysis between both groups, an unpaired student t test and a paired Wilcoxon test were used. In addition, the sports behavior, intraoperative findings, and surgical procedures were also assessed. RESULTS: After a mean follow-up of 4.3 years (±0.6; 3.4-5.6), the overall postoperative modified Harris hip score was 81.8 points, the nonarthritic hip score was 75.8 points, the Western Ontario and McMaster Universities Osteoarthritis Index was 36.7 points, and the University of California, Los Angeles activity score was 7.9. Compared with the preoperative results, all scores improved significantly (P < .001). Patients of the short-term return-to-activity group showed a higher preoperative activity diversity and, postoperatively, a higher rate in high-impact sports (P = .024). CONCLUSIONS: After mini-open arthrotomy for femoroacetabular impingement syndrome treatment, 92.5% of the recreational athletes returned to sports activity. The findings did not detect factors influencing the return-to-activity time. However, a higher preoperative diversity of activities and a shift to high-level impact sport activities might support a shorter rehabilitation.

Robotic-assisted TKA reduces surgery duration, length of stay and 90-day complication rate of complex TKA to the level of noncomplex TKA.

INTRODUCTION: Complex primary total knee arthroplasties (TKA) are reported to be associated with excessive episode of care (EOC) costs as compared to noncomplex procedures. The impact of robotic assistance (rTKA) on economic outcome parameters in greater case complexity has not been described yet. The purpose of this study was to investigate economic outcome parameters in the 90-days postoperative EOC in robotic-assisted complex versus noncomplex procedures. MATERIALS AND METHODS: This study is a retrospective, single-center review of 341 primary rTKAs performed between 2017 and 2020. Patient collective was stratified into complex (n = 218) and noncomplex TKA (n = 123) based on the presence of the following criteria: Obese BMI, coronal malalignment, flexion contracture > 10°, posttraumatic status, previous correction osteotomy, presence of hardware requiring removal during surgery, severe rheumatoid arthritis. Group comparison included surgery duration, length of stay (LOS), surgical site complications, readmissions, and revision procedures in the 90-days EOC following rTKA. RESULTS: The mean surgery duration was marginally longer in complex rTKA, but showed no significant difference (75.26 vs. 72.24 min, p = 0.258), neither did the mean LOS, which was 8 days in both groups (p = 0.605). No differences between complex and noncomplex procedures were observed regarding 90-days complication rates (7.34 vs. 4.07%, p = 0.227), readmission rates (3.67 vs. 3.25%, p = 0.841), and revision rates (2.29 vs. 0.81%, p = 0.318). CONCLUSIONS: Robotic-assisted primary TKA reduces the surgical time, inpatient length of stay as well as 90-days complication and readmission rates of complex TKA to the level of noncomplex TKA. Greater case complexity does not seem to have a negative impact on economic outcome parameters when surgery is performed with robotic assistance.

Analysis of factors affecting the time for implantation of a total hip arthroplasty in patients with symptomatic primary and secondary hip osteoarthritis.

BACKGROUND: Many studies have identified factors associated with an unfavourable clinical outcome or an early conversion to total hip arthroplasty (THA) after joint-preserving treatment. We analysed the effect and reliability of different factors on the age at which THA becomes necessary. METHODS: Hip joint radiographs of 2485 cases were evaluated using the lateral centre-edge angle (LCEA) and acetabulum angle (ACA) as well as the alpha angle to describe the femoral head shapes. Regressions were performed using patient's age at the time of THA and body mass index (BMI) as well as LCEA and ACA. Multiple linear regressions were used to create a formula comprising factors that significantly correlated with patient age at the time of joint replacement surgery. RESULTS: The BMI, LCEA, and ACA showed significant correlations with the age of THA implantation (p < 0.001). Multiple linear regressions produced the following formula: age (THA) = 72.40-0.40 × BMI + 0.20 × LCEA-0.18 × ACA. BMI showed a stronger impact on the age of end-stage osteoarthritis than the ACA. The formula explained 12.1% of the distributing data (r2). Surprisingly, the alpha angle did not show an impact on the age of THA surgery. CONCLUSIONS: BMI had the greatest impact on patient's age at the time of THA, followed by the characteristic radiological angles for hip dysplasia. The resulting formula could emphasise and visualise the significant impact of these factors. However, despite the calculation being based on 2485 cases, the calculated validity of 12.1% was limited.