From Forest to Future: Synthesis of Sustainable High Molecular Weight Polyamides Using and Investigating the AROP of ß-Pinene Lactam.

Polyamides (PA) are among the most essential and versatile polymers due to their outstanding characteristics, for example, high chemical resistance and temperature stability. Furthermore, nature-derived monomers can introduce hard-to-synthesize structures into the PAs for unique polymer properties. Pinene, as one of the most abundant terpenes in nature and its presumable stability-giving bicyclic structure, is therefore highly promising. This work presents simple anionic ring-opening polymerizations of ß-pinene lactam (AROP) in-bulk and in solution. PAs with high molecular weights, suitable for further processing, are produced. Their good mechanical, thermal (Td s up to 440 °C), and transparent appearance render them promising high-performance biomaterials. In the following, the suitability of different initiators is discussed. Thereby, it is found that NaH is the most successful for in-bulk polymerization, with a degree of polymerization (DP) of about 322. For solution-AROP, iPrMgCl·LiCl is successfully used for the first time, achieving DPs up to about 163. The obtained PAs are also hot-pressed, and the dynamic mechanical properties are analyzed.

(+)-Limonene-Lactam: Synthesis of a Sustainable Monomer for Ring-Opening Polymerization to Novel, Biobased Polyamides.

In this work, the synthesis of limonene lactam starting from limonene epoxide and its subsequent ring-opening polymerization (ROP) to novel polyamides is presented. Sustainable, biobased materials are gaining interest as replacements of conventional, petroleum-based materials, and even more important, as high-performance materials for new applications. Terpenes-structurally advanced biobased compounds-are therefore of great interest. In this research, limonene lactam, a novel biobased monomer for preparing sustainable polyamides via ROP, can be synthesized. Limonene lactam possesses an isopropylene and a methyl side group, thus stereocenters posing special challenges and requirements for synthesis, analysis and polymerization. However, these difficult-to-synthesize structural elements can generate novel polymers with unique properties, e.g., functionalizability. In this work, a sustainable monomer synthesis is established, and simplified to industrial needs. For the sterically demanding in-bulk ROP to limonene polyamides, various initiators and conditions are tested. Polyamides with more than 100 monomer units are successfully synthesized and confirmed via nuclear magnetic resonance (NMR) spectroscopy and gel permeations chromatography (GPC). Differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA) are used to analyze its thermal properties. In summary, a sustainable monomer synthesis is established, and promising polyamides with intact double bond and interesting thermal properties are achieved.

[OSSO]-Type Chromium(III) Complexes for the Reaction of CO2 with Epoxides.

In this work, four new mononuclear Cr(III) complexes (2-5) bearing bis-thioether-diphenolate, [OSSO]-type ligands, were synthesized and characterized. These complexes in combination with bis(triphenylphosphine)iminium chloride (PPNCl) promoted the coupling of CO2 with epoxides. Depending on the type of substrate and the conditions, the reaction results in the selective formation of either polycarbonate or cyclic carbonate. For example, the reactions in the presence of complex 2 led to the exclusive formation of poly(cyclohexene carbonate, PCHC) from cyclohexene oxide (CHO) (TOF up to 39 h-1 , at T=45-100 °C, time=24 h, pCO2 =20 bar, epoxide/2 (mol/mol)=1000, and PPNCl/2=0.5-2.0 mol %). Under the same conditions and PPNCl/2=0.5-5.0 mol %, the reactions of CO2 with styrene oxide (SO), epichlorohydrin (ECH), 1,2 epoxydodecane (EDD), and allyl glycidyl ether (AGE) have shown selective conversion to the corresponding cyclic carbonates (TOF up to 41 h-1 ).

Stereoregular Polymerization of Acyclic Terpenes.

The growing environmental pollution and the expected depleting of fossil resources have sparked interest in recent years for polymers obtained from monomers originating from renewable sources. Furthermore, nature can provide a variety of building blocks with special structural features (e. g. side groups or stereo-elements) that cannot be obtained so easily via fossil-based pathways. In this context, terpenes are widespread natural compounds coming from non-food crops, present in a large variety of structures, and ready to use as monomers with or without further modifications. The present review aims to provide an overview of how chemists can stereospecifically polymerize terpenes, particularly the acyclic ones like myrcene, ocimene, and farnesene, using different metal catalyst systems in coordination-insertion polymerization. Attention is also paid to their copolymers, which have recently been disclosed, and to the possible applications of these bio-based materials in various industrial sectors such as in the field of elastomers. © 2021 The Authors. ChemPlusChem published by Wiley-VCH GmbH. This is an open access article under the terms of the Creative Commons Attribution Non-Commercial License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited and is not used for commercial purposes.

ß-Pinene-Derived Polyesteramides and Their Blends: Advances in Their Upscaling, Processing, and Characterization.

Terpene-based polyesteramides (PEAs) are sustainable and have a variety of favorable properties, making them suitable for a wide range of applications and for contribution to a much more sustainable polymer industry. This work focuses on the synthesis of the lactam from ß-pinene and its copolymerization with ε-caprolactone. An important step in synthesizing ß-pinene lactam is the oxidation of ß-pinene to nopinone. To make the established oxidative cleavage more sustainable and efficient, the required amounts of Al2 O3 and KMnO4 are significantly reduced by using H2 SO4 as a catalyst. For the Beckmann rearrangement various catalysts and co-reagents are screened. Among these, the reaction with tosyl chloride is found the most favorable. Subsequently, the chain lengths of the ß-pinene-based PEAs are remarkably increased from 6000 g mol-1 to more than 25 100 g mol-1 by fine-tuning reaction time, temperature, and decreasing catalyst and initiator concentrations. Also, different catalysts for polymerization are tested. The resulting material shows melting temperatures of ≈55 °C and decomposition temperatures of 354 °C or higher. Processing via melt pressing or casting turned out to be quite difficult due to the polymer's brittleness. Furthermore, regarding biomedical applications, blends of PEA with polyethylene glycol were successfully prepared, yielding a more hydrophilic material.

Sustainable Myrcene-Based Elastomers via a Convenient Anionic Polymerization.

Soluble heterocomplexes consisting of sodium hydride in combination with trialkylaluminum derivatives have been used as anionic initiating systems at 100 °C in toluene for convenient homo-, co- and ter-polymerization of myrcene with styrene and isoprene. In this way it has been possible to obtain elastomeric materials in a wide range of compositions with interesting thermal profiles and different polymeric architectures by simply modulating the alimentation feed and the (monomers)/(initiator systems) ratio. Especially, a complete study of the myrcene-styrene copolymers (PMS) was carried out, highlighting their tapered microstructures with high molecular weights (up to 159.8 KDa) and a single glass transition temperature. For PMS copolymer reactivity ratios, rmyr = 0.12 ± 0.003 and rsty = 3.18 ± 0.65 and rmyr = 0.10 ± 0.004 and rsty = 3.32 ± 0.68 were determined according to the Kelen-Tudos (KT) and extended Kelen-Tudos (exKT) methods, respectively. Finally, this study showed an easy accessible approach for the production of various elastomers by anionic copolymerization of renewable terpenes, such as myrcene, with commodities.

Biobased chiral semi-crystalline or amorphous high-performance polyamides and their scalable stereoselective synthesis.

The use of renewable feedstock is one of the twelve key principles of sustainable chemistry. Unfortunately, bio-based compounds often suffer from high production cost and low performance. To fully tap the potential of natural compounds it is important to utilize their functionalities that could make them superior compared to fossil-based resources. Here we show the conversion of (+)-3-carene, a by-product of the cellulose industry into ε-lactams from which polyamides. The lactams are selectively prepared in two diastereomeric configurations, leading to semi-crystalline or amorphous, transparent polymers that can compete with the thermal properties of commercial high-performance polyamides. Copolyamides with caprolactam and laurolactam exhibit an increased glass transition and amorphicity compared to the homopolyamides, potentially broadening the scope of standard polyamides. A four-step one-vessel monomer synthesis, applying chemo-enzymatic catalysis for the initial oxidation step, is established. The great potential of the polyamides is outlined.

Polyamide/PEG Blends as Biocompatible Biomaterials for the Convenient Regulation of Cell Adhesion and Growth.

In addition to their established usage in textiles, commodities, and automotives, classical polyamides (nylons) are recently becoming increasingly interesting for applications in (bio)medicine. This fact relies on many prosperous properties of these polymers, which are toughness, resistance, biocompatibility, low immunogenicity, tunable biodegradability, and their similarity to natural peptides (amide bonds). Some nylon-based medical products do already exist for wound treatment applications, implants, and biomolecule-interacting membranes, but the systematic use of these polymers for tissue engineering is-although desired-still to be accomplished. Inspired by this, the suitability of nylon 6 and of a related biobased and more hydrophobic terpene-derived polyamide as surfaces for the controlled interaction with HaCat cells (human keratinocytes) are investigated herein with regard to possible applications for regenerative skin replacement. The nylons are applied as neat polymers and as hydrophilized blends/composites with polyethylene glycol and confirm their excellent suitability as biomaterials.

New Bio-Polyamides from Terpenes: α-Pinene and (+)-3-Carene as Valuable Resources for Lactam Production.

The synthesis and polymerization of two ß-lactams and two ε-lactams derived from the terpenes α-pinene and (+)-3-carene are reported. The new biopolymers can be considered as polyamide 2 (PA2) and polyamide 6 (PA6)-types with aliphatic stereoregular side chains, which lead to remarkable new properties. The macromolecules are investigated by gel permeation chromatography (GPC), nuclear magnetic resonance (NMR), differential scanning calorimetry (DSC), and infrared (IR). The (+)-3-carene-derived PA6-type is of particular interest, since it reaches a molecular weight of over 30 kDa, which is the highest value for lactam-based polyamides derived from terpenes reported to date. Additionally, a glass transition temperature (Tg ) of 120 °C is observed, surpassing the glass transition temperature of PA6 by 60 °C. The absence of a melting point (Tm ) indicates high amorphicity, another novelty for terpene-based polyamides, which might give transparent bio-polyamides access to new fields of application.

Pinenes: Abundant and Renewable Building Blocks for a Variety of Sustainable Polymers.

Pinenes, a group of monoterpenes containing a double bond, are very suitable renewable building blocks for a variety of sustainable polymers and materials. Their abundance from mainly non-edible parts of plants as well as the feasibility to isolate them render these molecules unique amongst the variety of biomass that is utilizable for novel materials. Accordingly, their use for the synthesis of biobased polymers has been investigated intensively, and strong progress has been made with this especially within the past 2-3 years. Direct cationic or radical polymerization via the double bonds as well as polymerization upon their further functionalization can afford a variety of sustainable polymers suitable for many applications, which is summarized in this Minireview.

Superhydrophobic Silicon Nanocrystal-Silica Aerogel Hybrid Materials: Synthesis, Properties, and Sensing Application.

Silicon nanocrystals (SiNCs) are abundant and exhibit exquisitely tailorable optoelectronic properties. The incorporation of SiNCs into highly porous and lightweight substrates such as aerogels leads to hybrid materials possessing the attractive features of both materials. This study describes the covalent deposition of SiNCs on and intercalation into silica aerogels, explores the properties, and demonstrates a prototype sensing application of the composite material. SiNCs of different sizes were functionalized with triethoxyvinylsilane (TEVS) via a radical grafting approach and subsequently used for the synthesis of photoluminescent silica hybrids. The resulting SiNC-containing aerogels possess high porosities, SiNC-based size-dependent photoluminescence, transparency, and a superhydrophobic macroscopic surface. The materials were used to examine the photoluminescence response toward low concentrations of 3-nitrotoluene (270 µM), demonstrating their potential as a sensing platform for high-energy materials.

Sustainable terpene-based polyamides via anionic polymerization of a pinene-derived lactam.

A sustainable lactam, which is derived from the renewable terpene ß-pinene, is converted to polyamides via a convenient anionic ring-opening polymerization (ROP), which can be easily handled without the use of a costly catalyst. The resulting polyamides have prosperous thermal properties, which enable their future use as high-performance polymers.

Recent advances in the synthesis of functional materials by engineered and recombinant living cells.

At the interface of materials science and synthetic biology, several concepts were recently developed for the production of functional materials by living cells. Selected recent strategies for this are highlighted here with a focus on bioactive, electronic and fluorescent materials.

In situ IR-spectroscopy as a tool for monitoring the radical hydrosilylation process on silicon nanocrystal surfaces.

Among a variety of SiNC functionalization methods, radical initiated grafting is very promising due to its straightforward nature and low propensity to form surface oligomers. In the present study, we employed in situ IR spectroscopy in combination with visible light transmittance measurements to investigate the radical induced grafting process on the well-defined SiNCs. Our findings support the proposed model: unfunctionalized hydride-terminated SiNCs form agglomerates in organic solvents, which break up during the grafting process. However, clearing of the dispersion is not a valid indicator for complete surface functionalization. Furthermore, radical-initiated grafting reactions in which azobisisobutyronitrile (AIBN) is the initiator are strongly influenced by external factors including initiator concentration, grafting temperature, as well as substrate steric demand. The monomer concentration was proven to have a low impact on the grafting process. Based on these new insights an underlying mechanism could be discussed, offering an unprecedented view on the functionalization of SiNC surfaces via radical initiated hydrosilylation.

Polyamides and their functionalization: recent concepts for their applications as biomaterials.

Synthetic polyamides (nylons) are very important polymers with applications in many fields, and recently their use in biology and medicine has become more and more important. Different recent concepts and strategies for the functionalization and applications of nylons as biomaterials are summarized in this article, with a focus on their utilization as scaffolds for tissue engineering, membranes and bioactive surfaces.

Sustainable, Stereoregular, and Optically Active Polyamides via Cationic Polymerization of ε-Lactams Derived from the Terpene ß-Pinene.

A convenient synthesis of sustainable polyamides, which contain side groups and stereocenters, starting from the biobased small terpene ß-pinene is reported. The polyamides, which are obtained via the pinene-based lactam via ring-opening polymerization, show excellent thermal properties, rendering this approach very interesting for the utilization of novel biobased and structurally significant high-performance polymers and materials. Polymer masses and yields are shown to be dependent on different parameters, and the stereoinformation of the lactam monomer can thus be transferred into the polymer chain. In addition, another lactam side product can also be transformed to polyamides.

Biobased Polyamides: Recent Advances in Basic and Applied Research.

Polyamides represent a very important class of polymers for a wide range of applications. After establishing in the 1930s with Nylon and Perlon, their impact on many branches has been continuously growing. In the context of developing sustainable polymers from renewable resources, many polyamides have meanwhile been described, which are based on natural building blocks. In addition to their sustainability, these biobased starting materials can provide special structural features to the resulting polymers and their properties, e.g., side groups, functionalities, or stereoinformation. While some biopolyamides are known for decades and well established (e.g., PA-11, Rilsan), many other promising candidates have been described in fundamental research studies, which have high potential but whose capability-especially for large scale and/or high-performance materials-will have to be proved in the future. Other candidates are very interesting from a scientific point of view, but with less potential for a market establishment due to price and/or feasibility reasons. This article aims at collating the recent developments in the field of biopolyamides and elucidating their properties and potential for different applications.

Macromol. Rapid Commun. 10/2016.

Back Cover: Sustainable polyamides with side groups and stereocenters are synthesized starting from L-menthone. This terpenoid ketone is transformed in a one-step synthesis into a chiral lactam, which is then polymerized via ring-opening polymerization (ROP). The beneficial properties of these polymers are thus introduced via the structure and chirality of the lactam monomer. Further details can be found in the article by M. Winnacker*, M. Neumeier, X. Zhang, C. M. Papadakis, and B. Rieger on page 851.

Sustainable Chiral Polyamides with High Melting Temperature via Enhanced Anionic Polymerization of a Menthone-Derived Lactam.

Polyamides are very important polymers that find applications from commodities up to the automotive and biomedical sectors, and their impact is continuously growing. The synthesis of structurally significant, chiral, and sustainable polyamides is described via a new, convenient, and solvent-free anionic polymerization of a biobased ε-lactam, which is obtained from the renewable terpenoid ketone l-menthone in a one-step synthesis. These polyamides are shown to have outstanding structural and thermal properties, which are thus introduced via the structure and chirality of the natural lactam monomer and which are discussed and compared with those of petroleum-based, established, and commercial polyamide Nylon-6. X-ray data reveal a remarkable degree of crystallinity in these green polymers and emphasize the impact of their structural features on the resulting properties.

Recent progress in sustainable polymers obtained from cyclic terpenes: synthesis, properties, and application potential.

The functionalization and polymerization of biobased monocyclic terpenes and their derivatives for the synthesis of sustainable polymers is described, especially in view of the synthetic routes and properties of the obtained macromolecular architectures. Comparison of these procedures and the obtained materials with "classical" oil-based approaches, and also with alternative biobased routes, gives interesting insights into the potential of these small terpene building-block structures for modern polymer science and technology.