Relative impact of mate versus pollinator availability on pollen limitation and outcrossing rates in a mass-flowering species.

Plant mating systems are driven by several pre-pollination factors, including pollinator availability, mate availability and reproductive traits. We investigated the relative contributions of these factors to pollination and to realized outcrossing rates in the patchily distributed mass-flowering shrub Rhododendron ferrugineum. We jointly monitored pollen limitation (comparing seed set from intact and pollen-supplemented flowers), reproductive traits (herkogamy, flower size and autofertility) and mating patterns (progeny array analysis) in 28 natural patches varying in the level of pollinator availability (flower visitation rates) and of mate availability (patch floral display estimated as the total number of inflorescences per patch). Our results showed that patch floral display was the strongest determinant of pollination and of the realized outcrossing rates in this mass-flowering species. We found an increase in pollen limitation and in outcrossing rates with increasing patch floral display. Reproductive traits were not significantly related to patch floral display, while autofertility was negatively correlated to outcrossing rates. These findings suggest that mate limitation, arising from high flower visitation rates in small plant patches, resulted in low pollen limitation and high selfing rates, while pollinator limitation, arising from low flower visitation rates in large plant patches, resulted in higher pollen limitation and outcrossing rates. Pollinator-mediated selfing and geitonogamy likely alleviates pollen limitation in the case of reduced mate availability, while reduced pollinator availability (intraspecific competition for pollinator services) may result in the maintenance of high outcrossing rates despite reduced seed production.

Linking diatom community structure to pesticide input as evaluated through a spatial contamination potential (Phytopixal): a case study in the Neste river system (South-West France).

A large-scale field survey was undertaken in the Neste system (South-West France) to investigate the impact of pesticide inputs on the structure of riverine benthic diatom communities. A total of 18 sites in the "Coteaux de Gascogne" study area were sampled during periods of pesticide use over two consecutive years (2005-2006). The typology of the diatoms collected was determined using artificial neural networks generating patterns in diatom community composition that indicated the species influenced by pesticide inputs, combined with organic pollution. Small, pioneer species of the Achnanthales group were more frequent in the pesticide-contaminated assemblages, whereas slower colonizers were more often found in the sites where disturbance was lower. The Phytopixal approach, a means to assess the spatial contamination potential, provided valuable information about pesticide exposure and was a successful means of discriminating diatom assemblages, suggesting that a global estimate of pesticide pollution risk, although rough, would be more appropriate and more representative than sporadic pesticide analyses.

Fate of polycyclic aromatic hydrocarbons during composting of activated sewage sludge with green waste.

The level and fate of 16 polycyclic aromatic hydrocarbons (PAHs), targeted by the US Environmental Protection Agency (USEPA), has been studied over 90 days of composting of activated sludge with green waste, under a semi-arid climate. The total PAH calculated from the sum of the amounts of the 16 PAHs in the initial mixture of activated sludge and green waste, was lower than accepted European Union cut-off limits by about 0.48mgkg(-1). The treatment by composting led to a decrease of all PAHs mainly in the stabilization phase, but some differences could be observed between PAHs with three or fewer aromatic rings (N< or = 3) and those with four or more (N> or = 4). The former (except phenanthrene) exhibited a continuous decrease, while the latter PAHs with N of four or more and phenanthrene showed increases in the intermediate stages (30-60 days). This indicates the high potential sorption mainly of PAH with high molecular weight (> or = N4) plus phenanthrene, their tight adsorption makes them inaccessible for microbial attack. The high molecular weight PAHs showed a greater reduction of their bioavailability than those of low molecular weight. Naphthalene, with the lowest molecular weight, showed the smallest decrease (about 67.8%) compared to other PAHs of higher molecular weight (decrease reaching 100%). This is in agreement with the fact that the adsorption is less reversible with increased numbers of fused aromatic rings or an increase of their hydrophobicity.

Microbial community dynamics during composting of sewage sludge and straw studied through phospholipid and neutral lipid analysis.

The composting process involves a succession of different communities of microorganisms that decompose the initial material, transforming it into a stable final product. In this work, the levels of phospholipid fatty acid (PLFA), neutral lipid fatty acid (NLFA) and sterol were monitored in compost versus time, as indicators of the activity of various microorganisms (Gram-positive or Gram-negative bacteria, fungi, etc.). During composting, the PLFA and NLFA from Gram-negative bacteria and eukaryotes (2-OH 10; 3-OH 12; 2-OH 14; 13:0; 16:1; 18:1 trans) as well as some sterols of plant origin (e.g. monostearin sterols) decreased until the end of composting. In contrast, the branched fatty acids with iso- and anteiso-forms (i-15:0; a-15:0; i-16; i-17) increased mainly in the thermophilic phase, but decreased right after. The PLFA 18:2 (6; 9), which is used as an index of the occurrence of some fungi, rose strongly at the beginning of composting, but fell after peak heating. In contrast, the other main sterol indicative of fungi, ergosterol, decreased at the beginning of the thermophilic phase, but increased strongly by the end of composting. Accordingly, cluster and PCA analysis separated the PLFA of Gram-negative bacteria and eukaryotic cells from those of Gram-positive bacteria and long-chain fatty acids. The fungal PLFA considered, 18:2 (9, 12), was clustered more closely to iso- and anteiso-branched PLFAs. Stigmasterol, squalene and cholesterol occurred in the lower right part of the loading plot and were clustered more closely to iso-, anteiso-branched PLFAs and 18:2 w 6,9 suggesting their relationship to microbial activities. We also observed the tendency of resistance of fatty acid PLFAs and NLFAs of long chain (19:0 (cis-9); 20:0) and some recalcitrant sterols, e.g. sitosterol, at the end of composting. The presence of high levels of the latter in the final stage indicates their contribution to the structural stability of organic matter fractions. These recalcitrant components were more clustered and occurred in the lower right part of the loading plot.

Photochemical UV/TiO2 treatment of olive mill wastewater (OMW).

Olive mill wastewater (OMW) was treated by photocatalysis using TiO2 under UV irradiation on the laboratory scale. The chemical oxygen demand, the coloration at 330nm, and the level of phenols all showed decreases which, after a 24-h treatment, reached 22%, 57% and 94%, respectively. The differences between these three values indicate the persistence of colourless, non-phenolic compounds. Application of the novel Fictitious Atomic-Group Separation method showed an increase in carbon oxidation state and confirmed that the attack primarily concerns, aromatic moieties. A fine spectroscopic study revealed the occurrence of three successive phases during the degradation process, thought to correspond to three different categories of molecules in the OMW and the presence of pectin compounds.

13C NMR study of the effect of aerobic treatment of olive mill wastewater (OMW) on its lipid-free content.

Olive mill wastewater was treated by an aerobic bio-process at different values of pH (with or without addition of lime), for 45 days on a laboratory scale, to evaluate the reduction of the organic load. The lipid content showed an appreciable change in relation to the applied treatment both for total lipids and for the different fractions (neutral lipids, monoglycerides and phospholipids). 13C NMR spectroscopy was performed on initial and final samples both raw and after lipid extraction. The main spectral differences were observed in the C-alkyl region (0-50 ppm), in the C O-alkyl/N-alkyl region (50-110 ppm), and in the C-carboxylic (160-200 ppm) region, providing information on the alterations occurring in the different biochemical entities composing this complex biomatrix (e.g. lipids and carbohydrates) according to the treatment.

Optimisation of biodegradation conditions for the treatment of olive mill wastewater.

The aim of the present paper was to optimise the conditions of aerobic treatment of olive mill wastewater. To do so, the waste was treated following the experimental optimal design methodology studying the set of factors susceptible to influence the treatment (pH, C/N ratio, aeration and temperature). The results of a first series of experiments showed a strong correlation between the reduction in the levels of polyphenols and three of the parameters studied, i.e. the C/N ratio, aeration and temperature. Optimised conditions led to a 94% drop in polyphenols. Then, for a finer study of the conditions, just two parameters were varied, the pH and the C/N ratio. The results showed that the conditions of pH modification (addition of lime or sodium hydroxide) and the C/N ratio (urea or ammonium nitrate) allowed the microbiological activity to be very significantly improved. This led to polyphenol reductions of 51% and 76%.

Long-term survey of heavy-metal pollution, biofilm contamination and diatom community structure in the Riou Mort watershed, South-West France.

In a metal-polluted stream in the Riou Mort watershed in SW France, periphytic biofilm was analyzed for diatom cell densities and taxonomic composition, dry weight and metal bio-accumulation (cadmium and zinc). Periphytic diatom communities were affected by the metal but displayed induced tolerance, seen through structural impact (dominance of small, adnate species) as well as morphological abnormalities particularly in the genera Ulnaria and Fragilaria. Species assemblages were characterized by taxa known to occur in metal-polluted environments, and shifts in the community structure expressed seasonal patterns: high numbers of Eolimna minima, Nitzschia palea and Pinnularia parvulissima were recorded in Summer and Autumn, whereas the species Surirella brebissonii, Achnanthidium minutissimum, Navicula lanceolata and Surirella angusta were dominant in Winter and Spring. Commonly used indices such as the Shannon diversity index and Specific Pollution Sensitivity Index reflected the level of pollution and suggest seasonal periodicity, the lowest diversities being observed in Summer.

Structural study of the fulvic fraction during composting of activated sludge-plant matter: elemental analysis, FTIR and 13C NMR.

The starting fulvic structures isolated from an initial mixture of activated sludge and plant matter presented abundant peptide structures and hydrocarbons that absorb in FTIR spectra around (1650 and 1560 cm(-1)) and 1072 cm(-1), respectively. They also present a high resonance signal in the O- and N-alkyl areas of (13)C NMR spectra. As composting proceeded, some changes led to the formation of the molecular structures of fulvic fraction as demonstrated by a decrease of intensity of compounds absorbing around 1072 cm(-1) and an increase of those absorbing around 1140 cm(-1). The resonance of O- and N-substituted alkyl carbon also decreased from 55.7% to 33.8%, with an increase in the intensity of aromatic carbons, alkyls and carboxyls. These data indicate that the microbial community that developed during composting used polysaccharides as an energy source, structures which are supplied in abundance in the initial material. The fulvic fraction of the final compost is much richer in aromatic structures and aliphatic ethers/esters, which are most likely preserved from the original material but probably also synthesized through the microbial activities. The occurrence of alkyl ethers/esters at the end of composting is demonstrated by strong absorbance around 1140 cm(-1) in the FTIR spectra and large peaks at 32 and 174 ppm in the NMR spectra. These structures could also be produced following the creation of ether/ester bonds during the humification process.

Phospholipid fatty acid analysis to monitor the co-composting process of olive oil mill wastes and organic household refuse.

The co-composting of olive oil mill wastes and household refuse was followed for 5 months. During the thermophilic phase of composting, the aerobic heterotrophic bacteria (AHB) count, showed a significant rise with a slight regression of fungal biomass. In the same way, phospholipid fatty acids PLFAs common in bacteria, showed a significant increase of hydroxyl and branched PLFAs. The evaluation of the ratio of octadecenoic PLFAs to stearic acid (C18:1omega/C18:0) revealed a significant reduction while a significant rise in the length of aliphatic chains evaluated by the stearic acid to palmitic acid ratio (C18:0/C16:0) was noted during the stabilization phase. The follow-up of PLFAs, indicates the degree of biodegradation that occurs during composting, it can be regarded an indicator of the stability and maturity of the end product.

Chemical and spectroscopic analysis of olive mill waste water during a biological treatment.

The treatment of olive mill waste water was studied on the laboratory scale. Physico-chemical analyses showed the final products had a mean pH of 5.4 without neutralisation and 5.7 when lime was added to the process. Raising the pH by adding lime had a positive outcome on the degradation of phenols, whose levels were reduced by over 76%. The lime also changed the structure of the organic matter, as seen in the infra-red spectra. Combining the FT-IR and 13C NMR data showed that with addition of lime, the density of aliphatic groups decreased to the benefit of aromatic groups, indicating that polymerisation of the organic matter occurred during the bioprocess. Under our experimental conditions, the biotransformation of olive mill waste water appears to favour the stabilisation of the organic matter through mechanisms analogous to those that lead to the formation of humus in the soil.

Amazonian plants from Peru used by Quechua and Mestizo to treat malaria with evaluation of their activity.

Indigenous Quechua and Mestizo populations from distinct areas in Loreto, Peru, were interviewed about traditional medication for the treatment of malaria. An ethnographic survey concerning the native theory of illness aetiology in the specific case of malaria permitted the elaboration of an efficient ethnopharmacological enquiry. The survey took place on three main zones corresponding to villages on the Napo and the Pastaza rivers (for the Quechua), and in the surroundings of Iquitos (for the Mestizos) and led to the collection of 14 plants. Serial extractions in hexane, dichloromethane, and methanol were performed on the different parts of the plants collected. The extracts were then tested for antiplasmodial activity in vitro. Seven plants displayed antiplasmodial activity (IC(50) from 2 to 25 microg/mL) and usually low cytotoxicity, indicating their antiplasmodial specificity. The results give scientific validation to the traditional medical knowledge of Quechua and Mestizo populations from Loreto and confirm a source of potentially active plants.

Treatment of olive mill waste-water by aerobic biodegradation: an analytical study using gel permeation chromatography, ultraviolet-visible and Fourier transform infrared spectroscopy.

Liquid waste from olive oil mills was digested following inoculation with soil microorganisms and fractionated through various grades of gel. The fractionation showed the range of sizes of the molecules in the waste. In addition, the disappearance of the low molecular weight fraction, which is retained by the gel, and the increase of the high molecular weight fraction, which is excluded by the gel, during the last stages of the microbial treatment, indicates polymerisation of the low-molecular-weight subunits. Characterization of the fractions by UV-visible and FTIR spectroscopy confirmed the increase in their degree of polymerisation during the treatment. This is paralleled by a reduction in the amount of aliphatic components and a concomitant increase in aromatic structures.

Heat treatment of whole milk by the direct joule effect--experimental and numerical approaches to fouling mechanisms.

The development of alternative technologies such as the direct Joule effect to pasteurize and sterilize food products is of great scientific and industrial interest. Our objective was 1) to gain insight into the ability to ensure ultra-high-temperature treatment of milk and 2) to investigate the links among thermal, hydraulic, and electrical phenomena in relation to fouling in a direct Joule effect heater. The ohmic heater [OH; E perpendicular to v (where E is the electrical field and v is the velocity); P (power) = 15 kW] was composed of 5 flat rectangular cells [e (space between the plate and electrode) = 15 mm, w (wall) = 76 mm, and L (length of the plate in plate heat exchanger or electrode) = 246 mm]--3 active cells to ensure heating and 2 (at the extremities) for electrical insulation and the recovery of leakage currents. In the first step, the thermal performance of the OH was investigated vs. the flow regimen [50 < Re (Reynolds number) < 5,000], supplied power (0 < P < 15 kW), and electrical conductivity of fluids (0.1 < sigma(20 degrees C) < 2 S/m) under clean conditions with model fluids. This protocol enabled a global thermal approach (thermal and electrical balance, modeling of the temperature profile of a fluid) and local analysis of the wall temperature of the electrode. An empirical correlation was established to estimate the temperature gradient, T(w)-T(b) (where T(w) is the wall temperature and T(b) is the product temperature) under clean conditions (without fouling) and was used to define operating conditions for pure-volume and direct-resistance heating. In the second step, the ability of OH to ensure the ultra-high-temperature treatment of whole milk was investigated and compared with a plate heat exchanger. Special care was taken to investigate the heat transfer phenomena occurring over a range of temperatures from 105 to 138 degrees C. This temperature range corresponds to the part of the process made critical by protein and mineral fouling. The objectives were 1) to demonstrate the ability of an OH to ensure heat treatment of milk, 2) to study the thermal and hydraulic performance with an increasing power and temperature difference between the inlet and outlet of the OH, 3) to define and validate a criterion to follow heat dissipation efficiency, and 4) to compare the fouling propensity with the different configurations. A heat dissipation coefficient, Rh(CO), was defined and validated to monitor the fouling propensity through global electrical and thermal parameters. Finally, a numerical simulation was developed to analyze heat profiles (wall, deposit, bulk). Because of an increasing Joule effect in the static deposit, the simulation showed how wall overheating would definitively cause fouling to spiral out of control.

Influence of processing stages on antimutagenic and antioxidant potentials of rooibos tea.

The antimutagenic and antioxidant potentials of rooibos (Aspalathus linearis) tea samples, collected from each of its major processing stages, were evaluated according to the Salmonella typhimurium mutagenicity test and the hydrogen donating ability and superoxide anion radical scavenging assays, respectively. Ten random samples were collected before and after fermentation, as well as after sun-drying, sieving, and steam pasteurization. Results indicated that the fermented tea had a significantly (P < 0.05) lower antimutagenic and antioxidant potential than the unfermented tea. Of the different processing stages, the most significant reduction in the antimutagenic and antioxidant property of the tea was found during the "fermentation" step. Sun-drying, sieving, and steam pasteurization also reduced the antimutagenic potential of the tea, although not to the same extent as the first processing step. The hydrogen donating ability was significantly increased after steam pasteurization in comparison to those of fermented and sun-dried tea. Pasteurization did not affect superoxide anion radical scavenging in comparison to fermented tea. Differences seem to exist in the antimutagenicity and antioxidant potencies of the tea sampled at the various stages during processing. A possible role of tea polyphenols in the antimutagenic and antioxdant activities of the tea is suggested as processing caused a significant reduction in the total polyphenolic content.