A novel fibre-ensemble level constitutive model for exogenous cross-linked collagenous tissues.

Exogenous cross-linking of soft collagenous tissues is a common method for biomaterial development and medical therapies. To enable improved applications through computational methods, physically realistic constitutive models are required. Yet, despite decades of research, development and clinical use, no such model exists. In this study, we develop the first rigorous full structural model (i.e. explicitly incorporating various features of the collagen fibre architecture) for exogenously cross-linked soft tissues. This was made possible, in-part, with the use of native to cross-linked matched experimental datasets and an extension to the collagenous structural constitutive model so that the uncross-linked collagen fibre responses could be mapped to the cross-linked configuration. This allowed us to separate the effects of cross-linking from kinematic changes induced in the cross-linking process, which in turn allowed the non-fibrous tissue matrix component and the interaction effects to be identified. It was determined that the matrix could be modelled as an isotropic material using a modified Yeoh model. The most novel findings of this study were that: (i) the effective collagen fibre modulus was unaffected by cross-linking and (ii) fibre-ensemble interactions played a large role in stress development, often dominating the total tissue response (depending on the stress component and loading path considered). An important utility of the present model is its ability to separate the effects of exogenous cross-linking on the fibres from changes due to the matrix. Applications of this approach include the utilization in the design of novel chemical treatments to produce specific mechanical responses and the study of fatigue damage in bioprosthetic heart valve biomaterials.

Limited role for biliary stent as surrogate fiducial marker in pancreatic cancer: stent and intratumoral fiducials compared.

PURPOSE: Because of low soft-tissue contrast of cone beam computed tomography (CBCT), fiducial markers are often used for radiation therapy patient setup verification. For pancreatic cancer patients, biliary stents have been suggested as surrogate fiducials. Using intratumoral fiducials as standard for tumor position, this study aims to quantify the suitability of biliary stents for measuring interfractional and respiratory-induced position variations of pancreatic tumors. METHODS AND MATERIALS: Eleven pancreatic cancer patients with intratumoral fiducials and a biliary stent were included in this study. Daily CBCT scans (243 in total) were registered with a reference CT scan, based on bony anatomy, on fiducial markers, and on the biliary stent, respectively. We analyzed the differences in tumor position (ie, markers center-of-mass position) among these 3 registrations. In addition, we measured for 9 patients the magnitude of respiratory-induced motion (MM) of the markers and of the stent on 4-dimensional CT (4DCT) and determined the difference between these 2 magnitudes (ΔMM). RESULTS: The stent indicated tumor position better than bony anatomy in 67% of fractions; the absolute difference between the markers and stent registration was >5 mm in 46% of fractions and >10 mm in 20% of fractions. Large PTV margins (superior-inferior direction, >19 mm) would be needed to account for this interfractional position variability. On 4DCT, we found in superior-inferior direction a mean ΔMM of 0.5 mm (range, -2.6 to 4.2 mm). CONCLUSIONS: For respiratory-induced motion, the mean ΔMM is small, but for individual patients the absolute difference can be >4 mm. For interfractional position variations, a stent is, on average, a better surrogate fiducial than bony anatomy, but large PTV margins would still be required. Therefore, intratumoral fiducials are recommended for online setup verification for all pancreatic patients scheduled for radiation therapy, including patients with a biliary stent.

Interfractional position variation of pancreatic tumors quantified using intratumoral fiducial markers and daily cone beam computed tomography.

PURPOSE: The aim of this study was to quantify interfractional pancreatic position variation using fiducial markers visible on daily cone beam computed tomography (CBCT) scans. In addition, we analyzed possible migration of the markers to investigate their suitability for tumor localization. METHODS AND MATERIALS: For 13 pancreatic cancer patients with implanted Visicoil markers, CBCT scans were obtained before 17 to 25 fractions (300 CBCTs in total). Image registration with the reference CT was used to determine the displacement of the 2 to 3 markers relative to bony anatomy and to each other. We analyzed the distance between marker pairs as a function of time to identify marker registration error (SD of linear fit residuals) and possible marker migration. For each patient, we determined the mean displacement of markers relative to the reference CT (systematic position error) and the spread in displacements (random position error). From this, we calculated the group systematic error, Σ, and group random error, σ. RESULTS: Marker pair distances showed slight trends with time (range, -0.14 to 0.14 mm/day), possibly due to tissue deformation, but no shifts that would indicate marker migration. The mean SD of the fit residuals was 0.8 mm. We found large interfractional position variations, with for 116 of 300 (39%) fractions a 3-dimensional vector displacement of >10 mm. The spread in displacement varied significantly (P<.01) between patients, from a vector range of 9.1 mm to one of 24.6 mm. For the patient group, Σ was 3.8, 6.6, and 3.5 mm; and σ was 3.6, 4.7 and 2.5 mm, in left-right, superior-inferior, and anterior-posterior directions, respectively. CONCLUSIONS: We found large systematic displacements of the fiducial markers relative to bony anatomy, in addition to wide distributions of displacement. These results for interfractional position variation confirm the potential benefit of using fiducial markers rather than bony anatomy for daily online position verification for pancreatic cancer patients.

Ex vivo deformations of the urinary bladder wall during whole bladder filling: contributions of extracellular matrix and smooth muscle.

As the complete understanding of urinary bladder function requires knowledge of organ level deformations, we conducted ex vivo studies of surface strains of whole bladders during controlled filling. The surface strains derived from displacements of surface markers applied to the posterior surface of excised rat bladders were tracked under slow filling with pressure and volume simultaneously recorded in the passive and completely inactivated states (i.e. with and without smooth muscle tone, respectively). Bladders evaluated in the passive state exhibited spontaneous contractions and larger average peak pressures (16.7 mm Hg compared to 6.4 mm Hg in the inactive state). Overall, the bladders exhibited anisotropic deformations and were stiffer in the circumferential direction, with average peak stretch values of approximately 2.3 and approximately 1.9 in the longitudinal and circumferential directions, respectively, for both states. Although bladders in the passive state were stiffer, they had similar average peak areal stretches of 4.3 in both states. However, differences early in the filling process as a result of a loss in smooth muscle tone in the inactive state resulted in longitudinal lengthening of 36%. Idealizing the bladder as a prolate spheroid, we estimated the wall stress-strain relation during filling and demonstrated that the intact bladder exhibited the classic stress-stretch relation, with a significantly protracted low stress region and peak stresses of 36 and 51 kPa in the longitudinal and circumferential directions, respectively. The present study fills a major gap in the urinary bladder biomechanics literature, wherein knowledge of the pressure-volume-wall stress-wall strain relation was explored for the first time in a functioning organ ex vivo.

On the mechanical role of de novo synthesized elastin in the urinary bladder wall.

The urinary bladder wall (UBW), which is composed of smooth muscle, collagen, and elastin, undergoes profound remodeling in response to changes in mechanical loading resulting from various pathologies. In our laboratory, we have observed the production of fibrillar elastin in the extracellular matrix (ECM), which makes the UBW a particularly attractive tissue to investigate smooth muscle tissue remodeling. In the present study, we explored the mechanical role that de novo elastin fibers play in altering UBW ECM mechanical behavior using a structural constitutive modeling approach. The mechanical behavior of the collagen fiber component of the UBW ECM was determined from the biaxial stress-stretch response of normal UBW ECM, based on bimodal fiber recruitment that was motivated by the UBW's unique collagen fiber structure. The resulting fiber ensemble model was then combined with an experimentally derived fiber angular distribution to predict the biaxial mechanical behavior of normal and the elastin-rich UBW ECM to elucidate the underlying mechanisms of elastin production. Results indicated that UBW ECM exhibited a distinct structure with highly coiled collagen fiber bundles and visible elastic fibers in the pathological situation. Elastin-rich UBW ECM had a distinct mechanical behavior with higher compliance, attributable to the indirect effect of elastin fibers contracting the collagen fiber network, resulting in a retracted unloaded reference state of the tissue. In conclusion, our results suggest that the urinary bladder responds to prolonged periods of high strain by increasing its effective compliance through the interaction between collagen and de novo synthesized elastic fibers.

An exploratory pathways analysis of temporal changes induced by spinal cord injury in the rat bladder wall: insights on remodeling and inflammation.

BACKGROUND: Spinal cord injuries (SCI) can lead to severe bladder pathologies associated with inflammation, fibrosis, and increased susceptibility to urinary tract infections. We sought to characterize the complex pathways of remodeling, inflammation, and infection in the urinary bladder at the level of the transcriptome in a rat model of SCI, using pathways analysis bioinformatics. METHODOLOGY/PRINCIPAL FINDINGS: Experimental data were obtained from the study of Nagatomi et al. (Biochem Biophys Res Commun 334: 1159). In this study, bladders from rats subjected to surgical SCI were obtained at 3, 7 or 25 days post-surgery, and Affymetrix GeneChip Rat Genome U34A arrays were used for cRNA hybridizations. In the present study, Ingenuity Pathways Analysis (Ingenuity Systems, www.ingenuity.com) of differentially expressed genes was performed. Analysis of focus genes in networks, functional analysis, and canonical pathway analysis reinforced our previous findings related to the presence of up-regulated genes involved in tissue remodeling, such as lysyl oxidase, tropoelastin, TGF-beta1, and IGF-1. This analysis also highlighted a central role for inflammation and infection, evidenced by networks containing genes such as CD74, S100A9, and THY1. CONCLUSIONS/SIGNIFICANCE: Our findings suggest that tissue remodeling, infection, inflammation, and tissue damage/dysfunction all play a role in the urinary bladder, in the complex response to SCI.

Collagen fiber alignment and biaxial mechanical behavior of porcine urinary bladder derived extracellular matrix.

The collagen fiber alignment and biomechanical behavior of naturally occurring extracellular matrix (ECM) scaffolds are important considerations for the design of medical devices from these materials. Both should be considered in order to produce a device to meet tissue specific mechanical requirements (e.g., tendon vs. urinary bladder), and could ultimately affect the remodeling response in vivo. The present study evaluated the collagen fiber alignment and biaxial mechanical behavior of ECM scaffold material harvested from porcine urinary bladder tunica mucosa and basement membrane (together referred to as urinary bladder matrix (UBM)) and ECM harvested from urinary bladder submucosa (UBS). Since the preparation of UBM allows for control of the direction of delamination, the effect of the delamination method on the mechanical behavior of UBM was determined by delaminating the submucosa and other abluminal layers by scraping along the longitudinal axis of the bladder (apex to neck) (UBML) or along the circumferential direction (UBMC). The processing of UBS does not allow for similar directional control. UBML and UBS had similar collagen fiber distributions, with a preferred collagen fiber alignment along the longitudinal direction. UBMC showed a more homogenous collagen fiber orientation. All samples showed a stiffer mechanical behavior in the longitudinal direction. Despite similar collagen fiber distributions, UBML and UBS showed quite different mechanical behavior for the applied loading patterns with UBS showing a much more pronounced toe region. The mechanical behavior for UBMC in both directions was similar to the mechanical behavior of UBML. There are distinct differences in the mechanical behavior of different layers of ECM from the porcine urinary bladder, and the processing methods can substantially alter the mechanical behavior observed.

Influence of osmotic pressure changes on the opening of existing cracks in 2 intervertebral disc models.

STUDY DESIGN: An experimental hydrogel model and a numerical mixture model were used to investigate why the disc herniates while osmotic pressure is decreasing. OBJECTIVE: To investigate the influence of decreasing osmotic pressure on the opening of cracks in the disc. SUMMARY OF BACKGROUND DATA: In the degeneration process, the disc changes structure (i.e., cracks occur, and osmotic pressure decreases). Disc herniation typically develops when hydration declines, but, on the other hand, it is said that the anulus of a highly hydrated disc has a high risk of rupture. We hypothesized that disc herniation is preceded by the opening of cracks as a result of decreasing osmotic pressure. METHODS: The osmotic pressure was changed in hydrogel samples with a crack, which was visualized with a confocal laser scanning microscope (Zeiss, Göttingen, Germany). A 2-dimensional finite element mixture model simulated a decrease in osmotic pressure around a crack in a swelling material. RESULTS: Experiments and simulations show that a decrease in osmotic pressure results in the opening of cracks. The simulations show high effective stress concentrations around the crack tip, while the overall stress level decreases, indicating an increased risk of crack growth. CONCLUSIONS: Decreasing osmotic pressure in a degenerating intervertebral disc enhances the opening of existing cracks, despite the concomitant decrease in anular stresses.