ABSTRACT
Substrate materials for printed circuit boards must meet ever-increasing requirements to keep up with electronics technology development. Especially in the field of high-frequency applications such as radar and cellular broadcasting, low permittivity and the dielectric loss factor are key material parameters. In this work, the dielectric properties of a high-temperature, thermoplastic PEEK/PEI blend system are investigated at frequencies of 5 and 10 GHz under dried and ambient conditions. This material blend, modified with a suitable filler system, is capable of being used in the laser direct structuring (LDS) process. It is revealed that the degree of crystallinity of neat PEEK has a notable influence on the dielectric properties, as well as the PEEK phase structure in the blend system developed through annealing. This phenomenon can in turn be exploited to minimize permittivity values at 30 to 40 wt.-% PEI in the blend, even taking into account the water uptake present in thermoplastics. The dielectric loss follows a linear mixing rule over the blend range, which proved to be true also for PEEK/PEI LDS compounds.
ABSTRACT
Hemicelluloses are an abundant biopolymer resource with interesting properties for applications in coatings and composite materials. The objective of this investigation was to identify variables of industrially relevant extraction processes that increase the purity of hemicelluloses extracted from fruit residues. Our main finding is that extraction with subcritical water, followed by precipitation with alcohol, can be adjusted to yield products with a purity of at least 90%. Purity was determined based on the total concentration of glucose, galactose, xylose, arabinose, and mannose after hydrolysis with sulfuric acid. In the first experimental design (DoE methodology), the effects of extraction temperature (95-155 °C) and time (20-100 min) on yield and purity were studied. A clear trade-off between yield and purity was observed at high temperatures, indicating the selective removal of impurities. In the second experimental design, the influence of extract pH and alcohol concentration on yield and purity was investigated for the raw extract and a concentrate of this extract with 1/6 of the original volume. The concentrate was obtained by ultrafiltration through ceramic hollow-fiber membranes. The highest purity of 96% was achieved with the concentrate after precipitating with 70% alcohol. Key factors for the resource efficiency of the overall process are addressed. It is concluded that extraction with subcritical water and ultrafiltration are promising technologies for producing hemicelluloses from fruit residues for material applications.
ABSTRACT
OBJECTIVE: The purpose of the present case report is to document the removal of a radix in antro without a hemorrhagic complication in presence of a posterior superior alveolar artery (PSAA) with a 2.8 mm diameter following a radiographic 3D planning by cone beam computed tomography (CBCT) scan. Furthermore, a brief literature overview on studies describing the existence and the variance of the PSAA is provided. METHOD AND MATERIALS: A foreign body removal in the right maxillary sinus was performed on a 33-year-old healthy man by using the lateral window osteotomy. The preoperative CBCT scan showed three arteries in the lateral maxillary sinus wall at a distance of 24.6 mm, 19.5 mm, and 13.5 mm to the alveolar crest. RESULTS: By removing a foreign body out of the maxillary sinus a vessel with a diameter of nearly 3 mm was exposed. Due to CBCT scan planning and the use of piezosurgery it was possible to avoid any damage to the vessel during the operation. The postoperative healing was uneventful and no complications occurred. CONCLUSION: Although laceration of vessels with a large diameter during lateral window osteotomy is not life-threatening it may compromise visualization and reduces the surgical outcome. Therefore, 3D imaging is recommended for the minimization of intra- and postoperative complications and for the localization of any foreign body in relation to other anatomical structures. This is of special interest in case of anatomical variances of blood vessels.
