Chiral induction and amplification in supramolecular systems at the liquid-solid interface.

Chiral induction and amplification in surface-confined supramolecular monolayers are investigated at the liquid-solid interface. Scanning tunneling microscopy (STM) proves that achiral molecules can self-assemble into globally chiral patterns through a variety of approaches, including induction by chiral solvents or by a novel chiral amplification method. Our study demonstrates the aptness of both approaches, which have already been applied to (supramolecular) polymers in solution, to create chiral supramolecular monolayers at the liquid-solid interface.

Reactivity ratios, and mechanistic insight for anionic ring-opening copolymerization of epoxides.

Reactivity ratios were evaluated for anionic ring-opening copolymerizations of ethylene oxide (EO) with either allyl glycidyl ether (AGE) or ethylene glycol vinyl glycidyl ether (EGVGE) using a benzyl alkoxide initiator. The chemical shift for the benzylic protons of the initiator, as measured by (1)H NMR spectroscopy, were observed to be sensitive to the sequence of the first two monomers added to the initiator during polymer growth. Using a simple kinetic model for initiation and the first propagation step, reactivity ratios for the copolymerization of AGE and EGVGE with EO could be determined by analysis of the (1)H NMR spectroscopy for the resulting copolymer. For the copolymerization between EO and AGE, the reactivity ratios were determined to be r(AGE) = 1.31 ± 0.26 and r(EO) = 0.54 ± 0.03, while for EO and EGVGE, the reactivity ratios were r(EGVGE) = 3.50 ± 0.90 and r(EO) = 0.32 ± 0.10. These ratios were consistent with the compositional drift observed in the copolymerization between EO and EGVGE, with EGVGE being consumed early in the copolymerization. These experimental results, combined with density functional calculations, allowed a mechanism for oxyanionic ring-opening polymerization that begins with coordination of the Lewis-basic epoxide to the cation to be proposed. The calculated transition-state energies agree qualitatively with the observed relative rates for polymerization.

Influence of the solvent and the enantiomeric purity on the transition between different supramolecular polymers.

The self-assembly of two enantiomerically pure hexa(oligo(p-phenylene vinylene))-substituted benzenes having 24 stereocenters was studied in pure methylcyclohexane (MCH) and in a mixture of MCH/toluene (4:1). Irrespective of the solvent a cooperative supramolecular polymerization mechanism was determined for these star-shaped molecules by using temperature-dependent CD and UV/Vis spectroscopy. Quite remarkably, a transition from one helical supramolecular state (A) to a second more thermodynamically stable supramolecular helical assembly (B) was observed. The rate of the A→B transition was strongly dependent on the nature of the solvent; being faster in the solvent mixture than in pure MCH. By using size exclusion chromatography we could relate the increased rate to a decreased stability of the supramolecular A state in the solvent mixture. Next, we mixed the two enantiomerically pure hexa-substituted benzene derivatives in a so-called majority-rules experiment, which lead to the anitcipated chiral amplification in the A state. More importantly it appeared that the A→B transition was significantly hampered in these mixed systems. Furthermore, the absence of chiral amplification in the B state revealed the formation of separated enantiomerically pure assemblies. Therefore, by using a wide variety of spectroscopic and chromatographic techniques we determined the influence of solvent and enantiomeric purity on the transition between different supramolecular states.

Ketene-Based Route to rigid Cyclobutanediol Monomers for the Replacement of BPA in High Performance Polyesters.

Recently, polyesters based on the diol monomer 2,2,4,4-tetramethyl-1,3-cyclobutanediol (TMCBDO) have been shown to exhibit excellent thermal stability, mechanical properties, and optical clarity. In particular, the ability of TMCBDO to replace bisphenol A as a diol monomer in polycarbonates and polyesters has resulted in significant commercial and academic interest in these types of monomers. Herein, we report a versatile synthetic strategy based on the dimerization of ketenes derived from the thermal treatment of Meldrum's acid for the synthesis of structurally diverse cyclobutanediol (CBDO) monomers. This strategy allows a library of CBDO monomers amenable to standard polyester polymerization procedures to be prepared and the structural diversity of these CBDO monomers provides polymers with tunable physical properties, such as glass transition temperature ranging from 120 to 230 °C. The versatility and modularity of this Meldrum's acid-based approach to substituted cyclobutanediols, combined with the ease of synthesis, will be important for the further development of high-performance polyester materials that are not based on bisphenol A.

An energy efficient and facile synthesis of high molecular weight polyesters using ketenes.

A facile, ketene-based strategy for the synthesis of polyesters from stable Meldrum's acid monomers has been developed which overcomes many issues associated with traditional step-growth procedures. A significant increase in polymerization efficiency is observed with only 10 min reaction time at 220 °C being needed to obtain high molecular weight polymers.

Reactive, multifunctional polymer films through thermal cross-linking of orthogonal click groups.

The ability to produce robust and functional cross-linked materials from soluble and processable organic polymers is dependent upon facile chemistries for both reinforcing the structure through cross-linking and for subsequent decoration with active functional groups. Generally, covalent cross-linking of polymeric assemblies is brought about by the application of heat or light to generate highly reactive groups from stable precursors placed along the chains that undergo coupling or grafting reactions. Typically, these strategies suffer from a general lack of control of the cross-linking chemistry as well as the fleeting nature of the reactive species that precludes secondary chemistry. We have addressed both of these issues using orthogonal chemistries to effect both cross-linking and subsequent functionalization of polymer films by mild heating, which results in exacting control of the cross-link density as well as the density of the residual stable functional groups available for subsequent, stepwise functionalization. This methodology is exploited to develop a strategy for the independent and orthogonal triple-functionalization of cross-linked polymer thin-films through microcontact printing.

On the transfer of cooperative self-assembled π-conjugated fibrils to a gold substrate.

The transfer of the cooperative self-assembled fibrils to a gold substrate has been studied by means of scanning probe microscopy techniques revealing the crucial role of the early formation of a monolayer.

Helical aromatic oligoamide foldamers as organizational scaffolds for photoinduced charge transfer.

Here we report the synthesis and characterization of four quinoline-derived foldamers with increasing oligomeric length; dimer O2P, tetramer O4P, pentamer O5P, and nonamer O9P functionalized with on one end an oligo(p-phenylene vinylene) (OPV) and on the other end a perylene bisimide (PB) chromophore. (1)H NMR confirms the formation of the expected folded structures in both toluene and chloroform solution. The structural predictability and rigidity of the oligomeric series enabled us to investigate the effect of a helical bridge and chromophore position on the photoinduced processes in the electron OPV-PB donor-acceptor pair in chloroform and toluene. The helical properties of the bridge ensured that the chromophore separation distance through space is different from the separation distance through the bridge. For all foldamer-solvent combinations studied, excitation of either OPV or PB results in nearly quantitative quenching of the fluorescence indicating a fast charge separation reaction between the OPV and PB. Femtosecond photoinduced absorption measurements confirmed the fast formation of a charge-separated state. The recombination reaction involves a combination of direct decay to the ground state and the formation of an intermediate triplet state, with their balance depending on the foldamer-solvent combination. Molecular orbital calculations rationalize the fast photoinduced charge separation, by revealing that the bridging foldamer mediates the charge transfer from donor to acceptor via the superexchange mechanism. Remarkably low attenuation factors (beta(CS) approximately 10(-2) A(-1)) were obtained using either through space or through bridge separation distance. However, in these calculations only three of the four foldamers show the expected linear behavior between the logarithm of the charge separation rate constant and the distance between the chromophores. The combined results show when a helical bridge is separating the charge transfer couple, hampering the usefulness of a uniform description of the charge-separation phenomena.

Molecular organization of cylindrical sexithiophene aggregates measured by X-ray scattering and magnetic alignment.

We have determined the internal organization of elongated sexithiophene aggregates in solution by combining small-angle X-ray scattering and magnetic birefringence experiments. The different aggregate axes can be probed independently by performing the experiments on magnetically aligned aggregates. We have found multiwalled cylindrical aggregates consisting of radially oriented sexithiophene molecules with pi-pi-stacking in the tangential direction, a structure that is considerably different from those previously found in other solvents. The aggregate morphology of this semiconducting material can thus be tuned by using different solvents, which offers the attractive perspective to steer chemical self-assembly toward nanostructures with desired functionalities, especially in combination with the alignment in a magnetic field.

The role of heterogeneous nucleation in the self-assembly of oligothiophenes.

The cooperative self-assembly of oligothiophenes can be characterized by heterogeneous nucleation caused by trace amounts of impurities leading to a manifold of supramolecular arrangements.

Visualization of various supramolecular assemblies of oligo(para-phenylenevinylene)-melamine and perylene bisimide.

A melamine derivative has been covalently equipped with two oligo(para-phenylenevinylene) (OPV) chromophores. This procedure yields a bifunctional molecule with two hydrogen-bonding arrays available for complementary binding to perylene bisimide derivatives. Depending on the solvent, hydrogen-bonded trimers, tetramers, and dimers on a graphite surface are observed for pure OPV-melamine by using scanning tunneling microscopy (STM). Upon the addition of perylene bisimide, linear tapes of perylene bisimide, 12-membered rosettes that consist of alternating hydrogen-bonded OPV-melamine and perylene bisimide moieties are visualized. These results provide direct evidence for the possible modes of hydrogen bonding within a supramolecular co-assembly in solution. Subsequently, the optical properties of pure OPV-melamine and co-assemblies with a perylene bisimide derivative were characterized in solution. In an apolar solvent, OPV-melamine self-assembles into chiral superstructures. Disassembly into molecularly dissolved species is reversibly controlled by concentration and temperature. Complementary hydrogen bonding to a perylene bisimide derivative in an apolar solvent yields multicomponent, pi-stacked dye assemblies of enhanced stability that are characterized by fluorescence quenching of the constituent chromophores. Titration experiments reveal that a mixture of hydrogen-bonded oligomers is present in solution, rather than a single discrete assembly. The solution experiments are consistent with the STM results, which revealed various supramolecular assemblies. Our system is likely not to be optimally programmed to obtain a discrete co-assembled structure in quantitative yield.

C3-symmetrical self-assembled structures investigated by vibrational circular dichroism.

We demonstrate by using vibrational circular dichroism (VCD) spectroscopy that it is possible to investigate the chirality of a supramolecular polymeric system in relatively dilute solutions. Chiral C(3)-symmetrical discotic molecules, based on a trialkylbenzene-1,3,5-carboxamide, form supramolecular columnar stacks with a right-handed helical structure in solution due to intermolecular hydrogen bonds. The handedness of the supramolecular chirality is determined using electronic spectroscopy measurements. Under dilute conditions (at 10(-3) M concentrations), it was also possible to probe the hydrogen bonding moieties with IR and VCD spectroscopy on these self-assembled structures. In combination with density functional theory (DFT) calculations, we could verify the preference for a right-handed chirality in the helical stacks and the nonplanar orientation of the carbonyl groups present in the molecule. This chiral arrangement is in agreement with the structure determined for a related benzene-1,3,5-tricarboxamide by X-ray diffraction. Chirality, 2008. (c) 2008 Wiley-Liss, Inc.

Influence of supramolecular organization on energy transfer properties in chiral oligo(p-phenylene vinylene) porphyrin assemblies.

A comparative study on oligo(p-phenylene vinylene) (OPV)-appended porphyrins containing all trans-vinylene (either hydrophilic or lipophilic) or amide linkages (lipophilic) is presented. The type of supramolecular arrangement obtained in organic solvents proves to be strongly dependent on the nature of the covalent connection. In the case of all trans-vinylene linkages, a J-type intermolecular packing is obtained and the assemblies are only of moderate stability. Conversely, the supramolecular structures obtained from the amide-linked system display an H-type stacking arrangement of enhanced stability and chirality as a consequence of intermolecular hydrogen bonding along the stack direction, favorably interlocking the stacked building blocks. Interestingly, the observed differences in stability and organization are qualitatively illustrated by monitoring the sequential energy transfer process in both types of assemblies. Efficient intramolecular energy transfer from the OPVs (donors) to the respective porphyrin cores is followed by energy transfer from Zn-porphyrin (donor) to free-base porphyrin (acceptor) in both systems. However, the improved intermolecular organization for the amide-linked system increases the energy transfer efficiency along the stack direction. In addition, the water-soluble (OPV)-appended porphyrin system forms highly stable assemblies in an aqueous environment. Nevertheless, the poor energy transfer efficiency along the stack direction reveals a relative lack of organization in these assemblies.

Sequential energy and electron transfer in aggregates of tetrakis[oligo(p-phenylene vinylene)] porphyrins and C60 in water.

Chiral aggregation of oligo(p-phenylene vinylene)-functionalized Zn and free-base porphyrins is observed in water. The formation of mixed assemblies containing both porphyrins results in sequential energy transfer from OPV via zinc porphyrin to free-base porphyrin. Furthermore, the incorporation of C60 as electron acceptor yields a charge separated state by ultimate electron transfer.