Use of membrane transport models to design cryopreservation procedures for oocytes.

Oocyte cryopreservation is increasingly being used in reproductive technologies for conservation and breeding purposes. Further development of oocyte cryopreservation techniques requires interdisciplinary insights in the underlying principles of cryopreservation. This review aims to serve this purpose by: (1) highlighting that preservation strategies can be rationally designed, (2) presenting mechanistic insights in volume and osmotic stress responses associated with CPA loading strategies and cooling, and (3) giving a comprehensive listing of oocyte specific biophysical membrane characteristics and commonly used permeation model equations. It is shown how transport models can be used to simulate the behavior of oocytes during cryopreservation processing steps, i.e., during loading of cryoprotective agents (CPAs), cooling with freezing as well as vitrification, warming and CPA unloading. More specifically, using defined cellular and membrane characteristics, the responses of oocytes during CPA (un)loading were simulated in terms of temperature- and CPA type-and-concentration-dependent changes in cell volume and intracellular solute concentration. In addition, in order to determine the optimal cooling rate for slow programmable cooling cryopreservation, the freezing-induced cell volume response was simulated at various cooling rates to estimate rates with tolerable limits. For vitrification, special emphasis was on prediction of the timing of reaching osmotic tolerance limits during CPA exposure, and the need to use step-wise CPA addition/removal protocols. In conclusion, we present simulations and schematic illustrations that explain the timing of events during slow cooling cryopreservation as well as vitrification, important for rationally designing protocols taking into account how different CPA types, concentrations and temperatures affect the oocyte.

Cooling dynamics of droplets exposed to solid surface freezing and vitrification.

Solid surface freezing or vitrification (SSF/SSV) can be done by depositing droplets of a sample, e.g., cells in a preservation solution, onto a pre-cooled metal surface. It is used to achieve higher cooling rates and concomitant higher cryosurvival rates compared to immersion of samples into liquid nitrogen. In this study, numerical simulations of SSF/SSV were conducted by modeling the cooling dynamics of droplets of cryoprotective agent (CPA) solutions. It was assumed that deposited droplets attain a cylindrical bottom part and half-ellipsoidal shaped upper part. Material properties for heat transfer simulations including density, heat capacity and thermal conductivity were obtained from the literature and extrapolated using polynomial fitting. The impact of CPA type, i.e., glycerol (GLY) and dimethyl sulfoxide (DMSO), CPA concentration, and droplet size on the cooling dynamics was simulated at different CPA mass fractions at temperatures ranging from -196 to 25 °C. Simulations show that glycerol solutions cool faster compared to DMSO solutions, and cooling rates increase with decreasing CPA concentration. However, we note that material property data for GLY and DMSO solutions were obtained in different temperature and concentration ranges under different conditions, which complicated making an accurate comparison. Experimental studies show that samples that freeze have a delayed cooling response early on, whereas equilibration times are similar compared to samples that vitrify. Finally, as proof of concept, droplets of human red blood cells (RBCs) were cryopreserved using SSV/SSF comparing the effect of GLY and DMSO on cryopreservation outcome. At 20% (w/w), similar hemolysis rates were found for GLY and DMSO, whereas at 40%, GLY outperformed DMSO.

Preserving frozen stallion sperm on dry ice using polymers that modulate ice crystalization kinetics.

Cryopreserved semen is routinely shipped in liquid nitrogen. Dry ice could serve as an alternative coolant, however, frozen storage above liquid nitrogen temperatures (LN2, -196 °C) may negatively affect shelf-life and cryosurvival. In this study, we determined critical temperatures for storage of cryopreserved stallion sperm. We evaluated: (i) effects of cooling samples to different subzero temperatures (-10 °C to -80 °C) prior to storing in LN2, (ii) stability at different storage temperatures (i.e., in LN2, dry ice, -80 °C and -20 °C freezers, 5 °C refrigerator), and (iii) sperm cryosurvival during storage on dry ice (i.e., when kept below -70 °C and during warming). Furthermore, (iv) we analyzed if addition of synthetic polymers (PVP-40, Ficoll-70) modulates ice crystallization kinetics and improves stability of cryopreserved specimens. Sperm motility and membrane intactness were taken as measures of cryosurvival, and an artificial insemination trial was performed to confirm fertilizing capacity. We found that adding PVP-40 or Ficoll-70 to formulations containing glycerol reduced ice crystal sizes and growth during annealing. Post-thaw sperm viability data indicated that samples need to be cooled below -40 °C before they can be safely plunged and stored in LN2. No negative effects of relocating specimens from dry ice to LN2 and vice versa became apparent. However, sample warming above -50 °C during transport in dry ice should be avoided to ensure preservation of viability and fertility. Moreover, addition of PVP-40 or Ficoll-70 was found to increase sperm cryosurvival, especially under non-ideal storage conditions where ice recrystallization may occur.

Cryopreserved red blood cells maintain allosteric control of oxygen binding when utilizing trehalose as a cryoprotectant.

One of the most common life-saving medical procedures is a red blood cell (RBC) transfusion. Unfortunately, RBCs for transfusion have a limited shelf life after donation due to detrimental storage effects on their morphological and biochemical properties. Inspired by nature, a biomimetics approach was developed to preserve RBCs for long-term storage using compounds found in animals with a natural propensity to survive in a frozen or desiccated state for decades. Trehalose was employed as a cryoprotective agent and added to the extracellular freezing solution of porcine RBCs. Slow cooling (-1 °C min-1) resulted in almost complete hemolysis (1 ± 1 % RBC recovery), and rapid cooling rates had to be used to achieve satisfactory cryopreservation outcomes. After rapid cooling, the highest percentage of RBC recovery was obtained by plunging in liquid nitrogen and thawing at 55 °C, using a cryopreservation solution containing 300 mM trehalose. Under these conditions, 88 ± 8 % of processed RBCs were recovered and retained hemoglobin (14 ± 2 % hemolysis). Hemoglobin's oxygen-binding properties of cryopreserved RBCs were not significantly different to unfrozen controls and was allosterically regulated by 2,3-bisphosphoglycerate. These data indicate the feasibility of using trehalose instead of glycerol as a cryoprotective compound for RBCs. In contrast to glycerol, trehalose-preserved RBCs can potentially be transfused without time-consuming washing steps, which significantly facilitates the usage of cryopreserved transfusible units in trauma situations when time is of the essence.

A Glutaraldehyde-Free Crosslinking Method for the Treatment of Collagen-Based Biomaterials for Clinical Application.

Biological bioprostheses such as grafts, patches, and heart valves are often derived from biological tissue like the pericardium. These bioprostheses can be of xenogenic, allogeneic, or autologous origin. Irrespective of their origin, all types are pre-treated via crosslinking to render the tissue non-antigenic and mechanically strong or to minimize degradation. The most widely used crosslinking agent is glutaraldehyde. However, glutaraldehyde-treated tissue is prone to calcification, inflammatory degradation, and mechanical injury, and it is incapable of matrix regeneration, leading to structural degeneration over time. In this work, we are investigating an alternative crosslinking method for an intraoperative application. The treated tissue's crosslinking degree was evaluated by differential scanning calorimetry. To confirm the findings, a collagenase assay was conducted. Uniaxial tensile testing was used to assess the tissue's mechanical properties. To support the findings, the treated tissue was visualized using two-photon microscopy. Additionally, fourier transform infrared spectroscopy was performed to study the overall protein secondary structure. Finally, a crosslinking procedure was identified for intraoperative processing. The samples showed a significant increase in thermal and enzymatic stability after treatment compared to the control, with a difference of up to 22.2 °C and 100%, respectively. Also, the tissue showed similar biomechanics to glutaraldehyde-treated tissue, showing greater extensibility, a higher failure strain, and a lower ultimate tensile strength than the control. The significant difference in the structure band ratio after treatment is proof of the introduction of additional crosslinks compared to the untreated control with regard to differences in the amide-I region. The microscopic images support these findings, showing an alteration of the fiber orientation after treatment. For collagen-based biomaterials, such as pericardial tissue, the novel phenolic crosslinking agent proved to be an equivalent alternative to glutaraldehyde regarding tissue characteristics. Although long-term studies must be performed to investigate superiority in terms of longevity and calcification, our novel crosslinking agent can be applied in concentrations of 1.5% or 2.0% for the treatment of biomaterials.

Osmotic properties of T cells determined by flow imaging microscopy in comparison to electrical sensing zone analysis.

To develop cryopreservation methods for cell-based medicinal products it is important to understand osmotic responses of cells upon immersion into solutions with cryoprotective agents (CPAs) and during freezing. The aim of this study was to assess the osmotic response of T cells by using flow imaging microscopy (FIM) as a novel cell-sizing technique, and to corroborate the findings with electrical impedance measurements conducted on a Coulter counter. Jurkat cells were used as a potential model cell line for primary T cells. Cell volume responses were used to derive important cell parameters for cryopreservation such as the osmotically inactive cell volume Vb and the membrane permeability towards water and various CPAs. Unlike Coulter counter measurement, FIM, combined with Trypan blue staining can differentiate between viable and dead cells, which yields a more accurate estimation of Vb. Membrane permeabilities to water, dimethyl sulfoxide (Me2SO) and glycerol were measured for Jurkat cells at different temperatures. The permeation of Me2SO into the cells was faster in comparison to glycerol. CPA permeation decreased with decreasing temperature following Arrhenius behavior. Moreover, membrane permeability to water decreased in the presence of CPAs. Vb of Jurkat cells was found to be 49% of the isotonic volume and comparable to that of primary T cells. FIM proved to be a valuable tool to determine the membrane permeability parameters of mammalian cells to water and cryoprotective agents, which in turn can be used to rationally design CPA loading procedures for cryopreservation.

Infrared spectroscopic analysis of hydrogen-bonding interactions in cryopreservation solutions.

BACKGROUND: In this study we investigated hydrogen bonding interactions in hydrated and frozen solutions of different cryoprotective agents (CPAs) including dimethyl sulfoxide, glycerol, ethylene glycol, propylene glycol, and trehalose. We also investigated the effect of CPAs on ice crystal growth during storage and correlated this with storage stability of liposomes. METHODS: FTIR spectroscopy was used to study hydrogen bonding interactions in CPA solutions in H2O and D2O, and their thermal response was analyzed using van 't Hoff analysis. The effect of CPAs on ice crystal growth during storage was investigated by microscopy and correlated with storage stability of liposomes encapsulated with a fluorescent dye. RESULTS: Principal component analyses demonstrated that different CPAs can be recognized based on the shape of the OD band region only. Chemically similar molecules such as glycerol and ethylene glycol closely group together in a principal component score plot, whereas trehalose and DMSO appear as condensed separated clusters. The OH/OD band of CPA solutions exhibits an overall shift to higher wavenumbers with increasing temperature and changed fractions of weak and strong hydrogen interactions. CPAs diminish ice crystal formation in frozen samples during storage and minimize liposome leakage during freezing but cannot prevent leakage during frozen storage. CONCLUSIONS: CPAs can be distinguished from one another based on the hydrogen bonding network that is formed in solution. DMSO-water mixtures behave anomalous compared to other CPAs that have OH groups. CPAs modulate ice crystal formation during frozen storage but cannot prevent liposome leakage during frozen storage.

Alginate encapsulation of stallion sperm for increasing storage stability.

The aim of this study was to establish an alginate encapsulation procedure for stallion sperm, and investigate if sperm encapsulation enhances longevity during cold storage and survival after cryopreservation. First, biocompatibility of the compounds needed for encapsulation was tested and factors determining capsule structure were identified. Sperm encapsulation was realized either by depositing droplets (20 µL) of sperm solution supplemented with barium or calcium chloride (10 mM) in alginate solution (0.25%, w/v), or by adding sperm-alginate droplets in solution containing barium or calcium chloride, and hardening (10 min). The first procedure resulted in structures with sperm residing in a liquid core surrounded by a spherical alginate shell, whereas the second procedure resulted in sperm embedded in solid beads of alginate matrix. It was found that use of calcium for alginate gelation resulted in decreased sperm motility as compared to using barium, and that encapsulation in solid beads had a negative impact on sperm plasma membrane intactness. Percentages of membrane intact sperm in barium-alginate core-shell structures were similar as found for ordinary diluted sperm, and did not change during 4 d storage at 5 °C. Sperm motility was reduced after direct recovery from core-shell structures, however, remained stable during 4 d storage leading to similar values as found for un-encapsulated sperm at this time point. Cryosurvival of sperm encapsulated in solid beads or core-shell structures was found to be lower compared to that of ordinary diluted sperm.

Towards increasing stallion sperm longevity by storage at subzero temperatures in the absence of ice.

The aim of cell preservation technologies is to slow down damaging reactions by lowering the storage temperature. Upon dilution in a stabilizing extender, stallion sperm can be stored at refrigerator temperatures for several days. Cryopreservation allows storage for decades, but freezing and thawing cause damage and viability losses. It is assumed that by storing cells at subzero temperatures in a non-frozen supercooled state, the damaging effects of ice formation can be avoided. In this study, we have investigated if stallion sperm can be stored at -10°C in the absence of ice, and compared viability during supercooled storage with that during storage at 5°C. We found that addition of 2% Ficoll-400 to buffered saline and covering with mineral oil depressed the sample freezing point and inhibited surface-catalyzed nucleation. This allowed storage in a supercooled state at -10°C for up to 7 days. Supplementing specimens with sperm, however, increased the incidence of sample freezing. Nonetheless, with 50×106 sperm mL-1, about 40% of the samples turned out to be non-frozen. Adding 100 mM sucrose was found to preserve sperm membrane intactness during supercooled storage, although this resulted in lower percentages as found with refrigerated storage. Sperm motility appeared to be lost during supercooled storage but could be partly restored by substituting buffered saline with a milk-based extender as base medium. Percentages of membrane intact sperm, however, were found to be lower. Supercooled storage holds promise for semen preservation, but further optimization of the storage solution is required to preserve sperm motility.

Loading equine oocytes with cryoprotective agents captured with a finite element method model.

Cryopreservation can be used to store equine oocytes for extended periods so that they can be used in artificial reproduction technologies at a desired time point. It requires use of cryoprotective agents (CPAs) to protect the oocytes against freezing injury. The intracellular introduction of CPAs, however, may cause irreversible osmotic damage. The response of cells exposed to CPA solutions is governed by the permeability of the cellular membrane towards water and the CPAs. In this study, a mathematical mass transport model describing the permeation of water and CPAs across an oocyte membrane was used to simulate oocyte volume responses and concomitant intracellular CPA concentrations during the exposure of oocytes to CPA solutions. The results of the analytical simulations were subsequently used to develop a phenomenological finite element method (FEM) continuum model to capture the response of oocytes exposed to CPA solutions with spatial information. FEM simulations were used to depict spatial differences in CPA concentration during CPA permeation, namely at locations near the membrane surface and towards the middle of the cell, and to capture corresponding changes in deformation and hydrostatic pressure. FEM simulations of the multiple processes occurring during CPA loading of oocytes are a valuable tool to increase our understanding of the mechanisms underlying cryopreservation outcome.

Drying and temperature induced conformational changes of nucleic acids and stallion sperm chromatin in trehalose preservation formulations.

Even though dried sperm is not viable, it can be used for fertilization as long as its chromatin remains intact. In this study, we investigated drying- and temperature-induced conformational changes of nucleic acids and stallion sperm chromatin. Sperm was diluted in preservation formulations with and without sugar/albumin and subjected to convective drying at elevated temperatures on glass substrates. Accumulation of reactive oxygen species was studied during storage at different temperatures, and the sperm chromatin structure assay was used to assess DNA damage. Fourier transform infrared spectroscopy was used to identify dehydration and storage induced conformational changes in isolated DNA and sperm chromatin. Furthermore, hydrogen bonding in the preservation solutions associated with storage stability were investigated. Reactive oxygen species and DNA damage in dried sperm samples were found to accumulate with increasing storage temperature and storage duration. Non-reducing disaccharides (i.e., trehalose, sucrose) and albumin counteracted oxidative stress and preserved sperm chromatin during dried storage, whereas glucose increased DNA damage during storage. When sperm was dried in the presence of trehalose and albumin, no spectral changes were detected during storage at refrigeration temperatures, whereas under accelerated aging conditions, i.e., storage at 37 °C, spectral changes were detected indicating alterations in sperm chromatin structure.

high-throughput droplet vitrification of stallion sperm using permeating cryoprotective agents.

Stallion sperm is typically cryopreserved using low cooling rates and low concentrations of cryoprotective agents (CPAs). The inevitable water-to-ice phase transition during cryopreservation is damaging and can be prevented using vitrification. Vitrification requires high cooling rates and high CPA concentrations. In this study, the feasibility of stallion sperm vitrification was investigated. A dual-syringe pump system was used to mix sperm equilibrated in a solution with a low concentration of CPAs, with a solution containing a high CPA concentration, and to generate droplets of a defined size (i.e., ~20 µL) that were subsequently cooled by depositing on an aluminum alloy block placed in liquid nitrogen. Mathematical modeling was performed to compute the heat transfer and rate of cooling. The minimum CPA concentration needed for vitrification was determined for various CPAs (glycerol, ethylene glycol, propylene glycol, dimethyl sulfoxide) and combinations thereof, while effects of droplet size and carrier solution were also identified. Sperm vitrification was eventually done using a glycerol/propylene glycol (1/1) mixture at a final concentration of 45% in buffered saline supplemented with 3% albumin and polyvinylpyrrolidon, while warming was done in standard diluent supplemented with 100 mM sucrose. The sperm concentration was found to greatly affect sperm membrane integrity after vitrification-and-warming, i.e., was found to be 21 ± 12% for 10 × 106 sperm mL-1 and 54 ± 8% for 1 × 106 sperm mL-1. However, an almost complete loss of sperm motility was observed. In conclusion, successful sperm vitrification requires establishing the narrow balance between droplet size, sperm concentration, CPA type and concentration, and exposure time.

Fourier transform infrared spectroscopy coupled with machine learning classification for identification of oxidative damage in freeze-dried heart valves.

Freeze-drying can be used to ensure off-the-shelf availability of decellularized heart valves for cardiovascular surgery. In this study, decellularized porcine aortic heart valves were analyzed by nitroblue tetrazolium (NBT) staining and Fourier transform infrared spectroscopy (FTIR) to identify oxidative damage during freeze-drying and subsequent storage as well as after treatment with H2O2 and FeCl3. NBT staining revealed that sucrose at a concentration of at least 40% (w/v) is needed to prevent oxidative damage during freeze-drying. Dried specimens that were stored at 4 °C depict little to no oxidative damage during storage for up to 2 months. FTIR analysis shows that fresh control, freeze-dried and stored heart valve specimens cannot be distinguished from one another, whereas H2O2- and FeCl3-treated samples could be distinguished in some tissue section. A feed forward artificial neural network model could accurately classify H2O2 and FeCl3 treated samples. However, fresh control, freeze-dried and stored samples could not be distinguished from one another, which implies that these groups are very similar in terms of their biomolecular fingerprints. Taken together, we conclude that sucrose can minimize oxidative damage caused by freeze-drying, and that subsequent dried storage has little effects on the overall biochemical composition of heart valve scaffolds.

Freeze-Drying of Decellularized Heart Valves for Off-the-Shelf Availability.

Malfunctioning heart valves can cause severe health problems, which if left untreated can lead to death. One of the treatment options is to replace a diseased heart valve with a decellularized valve construct prepared from human or animal material. Decellularized tissue scaffolds closely resemble properties of native tissue, while lacking immunogenic factors of cellular components. After transplantation, circulating stem and progenitor cells of the patient adhere to the scaffold resulting in in vivo tissue regeneration of the valve. Decellularized heart valve scaffold implants need to be stored to be readily available whenever needed, which can be done by freeze-drying. The advantage of freeze-drying is that it does not require bulky and energy-consuming freezing equipment for storage and allows easy transport. This chapter outlines the entire process from decellularization to freeze-drying to obtain dry decellularized heart valves, which after a simple rehydration step, can be used as implants. The protocol is described for porcine heart valves, but procedures can easily be adapted for material obtained from other species.

Transport processes in equine oocytes and ovarian tissue during loading with cryoprotective solutions.

BACKGROUND: Rational design of cryopreservation strategies for oocytes and ovarian cortex tissue requires insights in the rate at which cryoprotective agents (CPA) permeate and concomitant water transport takes place. The aim of the current study was to investigate possible differences in permeation kinetics of different CPAs (i.e., glycerol/GLY, ethylene glycol/EG, dimethyl sulfoxide/DMSO, and propylene glycol/PG), in equine oocytes as well as ovarian tissue. METHODS: Membrane permeability of oocytes to water (Lp) and to CPAs (Ps) was inferred from video microscopic imaging of oocyte volume responses during perfusion with anisotonic and CPA solutions. CPA diffusion into ovarian tissue and tissue dehydration was monitored during incubation, using osmometer and weight measurements, to derive CPA diffusion coefficients (D). RESULTS: Membrane permeability of oocytes towards CPAs was found to increase in the order GLY < EG < DMSO

Spectroscopic assessment of oxidative damage in biomolecules and tissues.

Oxidative damage is one of the main causes of cryopreservation injury compromising the use of cryopreserved biospecimens. The aim of this study was to evaluate the use of Fourier transform infrared spectroscopy (FTIR) as a non-invasive method to assess changes in biomolecular composition and structure, associated with oxidative stress in isolated biomolecules, acellular heart valve tissues, and ovarian cortex tissues. FTIR spectra of these specimens subjected to various treatments (H2O2- and Fenton-treatment or elevated temperatures) were vector normalized and selected spectral regions were analyzed by principal component analysis (PCA). Control and damaged biomolecules can easily be separated using PCA score plots. Acellular heart valve tissues that were subjected to different levels of oxidative damage formed separate cluster in PCA score plots. In hydrated ovarian tissue, large variation of the principal components was observed. Drying the ovarian tissues samples resulted in improved cluster separation of treatment groups. However, early signs of oxidative damage under mild stress conditions could not be detected by PCA of FTIR spectra. For the ovarian tissue samples, the standardly used nitro blue tetrazolium chloride (NBT) assay was used to monitor the amount of formazan production, reflecting reactive oxygen species (ROS) production at various temperatures. At 37 °C, formazan staining rapidly increased during the first 30 min, and then slowly reached a saturation level, but also at lower temperatures (i.e. 4 °C) formazan production was observed. In summary, we conclude that ATR-FTIR combined with PCA can be used to study oxidative damage in biomolecules as well as in tissues. In tissues, however, sample heterogeneity makes it difficult to detect early signs of oxidative damage.

Principles Underlying Cryopreservation and Freeze-Drying of Cells and Tissues.

Cryopreservation and freeze-drying can be used to preserve cells or tissues for prolonged periods. Vitrification, or ice-free cryopreservation, is an alternative to cryopreservation that enables cooling cells to cryogenic temperatures in the absence of ice. The processing pathways involved in (ice-free) cryopreservation and freeze-drying of cells and tissues, however, can be very damaging. In this chapter, we describe the principles underlying preservation of cells for which freezing and drying are normally lethal processes as well as for cells that are able to survive in a reversible state of suspended animation. Freezing results in solution effects injury and/or intracellular ice formation, whereas drying results in removal of (non-freezable) water normally bound to biomolecules, which is generally more damaging. Cryopreservation and freeze-drying require different types of protective agents. Different mechanistic modes of action of cryoprotective and lyoprotective agents are described including minimizing ice formation, preferential exclusion, water replacement, and vitrification. Furthermore, it is discussed how protective agents can be introduced into cells avoiding damage due to too large cell volume excursions, and how knowledge of cell-specific membrane permeability properties in various temperature regimes can be used to rationally design (ice-free) cryopreservation and freeze-drying protocols.

Use of In Situ Fourier Transform Infrared Spectroscopy in Cryobiological Research.

In this chapter, we describe how Fourier transform infrared spectroscopy (FTIR) can be applied in cryobiological research to study: structure and thermal properties of biomolecules in cells and tissues, physical properties of cryopreservation and freeze-drying formulations, and permeation of molecules into cells and tissues. An infrared spectrum gives information about characteristic molecular vibrations of specific groups in molecules, whereas the temperature dependence of specific infrared bands may reveal information about conformational and phase changes. Infrared spectroscopy is minimally invasive and does not require labeling, whereas spectra can be recorded in any physical state of a sample. Data acquisition and spectral processing procedures are described to study phase state changes of protective formulations, cell membrane phase behavior during freezing and drying, protein denaturation during heating, and permeation of protective molecules into tissues. The latter can be used to estimate incubation times needed to load tissues with sufficient amounts of protective agents for cryopreservation or freeze-drying.

Cryopreservation of Semen from Domestic Livestock: Bovine, Equine, and Porcine Sperm.

In modern livestock breeding, cryopreserved semen is routinely used for artificial insemination. Sperm cryopreservation allows for long-term storage of insemination doses and secures reproduction at a desired time point. In order to cryopreserve semen, it needs to be carefully processed to preserve its vital functions after thawing. In this chapter, we describe the processes involved in cryopreservation of bull, stallion, and boar sperm. These include preparation of diluents, dilution of sperm in primary and freezing extender, slow cooling from room temperature to 5 °C, packaging of insemination doses in straws, freezing at a defined cooling rate in liquid nitrogen vapor, cryogenic storage, and thawing. Two-step dilution approaches, with commonly used diluents, are presented, namely, TRIS-egg yolk (TEY) extender for bull sperm, skim milk (INRA-82) extender for stallion sperm, and lactose-egg yolk (LEY) extender for boar sperm. Furthermore, simple methods are presented for cooling and freezing of sperm at defined cooling rates.

Spectral fingerprinting to evaluate effects of storage conditions on biomolecular structure of filter-dried saliva samples and recovered DNA.

Saliva has been widely recognized as a non-invasive, painless and easy-to-collect bodily fluid, which contains biomarkers that can be used for diagnosis of both oral and systemic diseases. Under ambient conditions, salivary biomarkers are subject to degradation. Therefore, in order to minimize degradation during transport and storage, saliva specimens need to be stabilized. The aim of this study was to investigate the feasibility of preserving saliva samples by drying to provide a shelf-stable source of DNA. Human saliva was dried on filters under ambient conditions using sucrose as lyoprotective agent. Samples were stored under different conditions, i.e. varying relative humidity (RH) and temperature. In addition to assessment of different cell types in saliva and their DNA contents, Fourier transform infrared spectroscopy (FTIR) was used to evaluate the effects of storage on biomolecular structure characteristics of saliva. FTIR analysis showed that saliva dried without a lyoprotectant exhibits a higher content of extended ß-sheet protein secondary structures compared to samples that were dried with sucrose. In order to evaluate differences in characteristic bands arising from the DNA backbone among differently stored samples, principal component analysis (PCA) was performed, allowing a clear discrimination between groups with/without sucrose as well as storage durations and conditions. Our results indicated that saliva dried on filters in the presence of sucrose exhibits higher biomolecular stability during storage.