Environmental Sustainability and Mold Hygiene in Buildings.

Environmental sustainability is one of the key issues in building management. In Hong Kong, one of the initiatives is to reduce the operation hours of air-conditioning in buildings to cut down energy consumption. In this study, we reported a mold contamination case in a newly refurbished laboratory, in which the air-conditioner was switched from 24- to 18-h mode after refurbishment. In order to prevent mold recurrence, the air-conditioner was switched back to 24-h mode in the laboratory. During the mold investigation, visible mold patches in the laboratory were searched and then cultured, counted and identified. Building and environmental conditions were recorded, and used to deduce different causes of mold contamination. Eight contaminated sites including a wall, a bench, some metal and plastic surfaces and seven types of molds including two Cladosporium spp., two Aspergillus spp., one Rhizopus sp., one Trichoderma sp., and one Tritirachium sp. were identified. Cladosporium spp. were the most abundant and frequently found molds in the laboratory. The contaminated areas could have one to five different species on them. Based on the mold and environmental conditions, several scenarios causing the mold contamination were deduced, and different mold control measures were discussed to compare them with the current solution of using 24-h air-conditioning to control mold growth. This study highlights the importance of mold hygiene in sustainable building management.

Degradation of tetracycline and sulfadiazine during continuous thermophilic composting of pig manure and sawdust.

During composting, the thermophilic phase resulted in high degradation of antibiotics in the composting mass; thus temperature is considered as the major factor for degradation of antibiotics. Therefore, to achieve complete removal of antibiotics, the effect of continuous thermophilic composting on the degradation of antibiotics and their effect on antibiotic resistant bacteria in the pig manure were evaluated. Pig manure was mixed with sawdust, spiked with tetracycline (10 and 100 mg/kg) and sulfadiazine (2 and 20mg/kg) on dry weight (DW) basis and composted at 55 degrees C for six weeks. Based on the organic decomposition, the antibiotics did not affect the composting process significantly, but negatively influenced the bacterial population. Tetracycline clearly exhibited a negative but marginal influence on carbon decomposition at 100 mg/kg level. The bacterial population initially decreased steeply approximately 2 logs and slowly increased thereafter. Sulfadiazine and tetracycline resistant bacterial populations were stable/marginally increased after an initial decrease of about 2 or 3-5 logs, respectively. Sulfadiazine was not detectable after three days; whereas, approximately 8% of tetracycline was detected after 42 days of composting with a t(1/2) of approximately 11 days, irrespective of the initial concentration. The presence of tetracycline in the compost after 42 days of thermophilic composting indicates the involvement of a mesophilic microbial-mediated degradation; however, further studies are required to confirm the direct microbial involvement in the degradation of antibiotics.

Coal fly ash and lime addition enhances the rate and efficiency of decomposition of food waste during composting.

To evaluate the use of coal fly ash (CFA) on the decomposition efficiency of food waste, synthetic food waste was mixed with lime at 1.5% and 3% (equivalent to 0.94% and 1.88% CaCO(3), respectively), CFA at 5%, 10% and 15% with lime so as to achieve CaCO(3) equivalent of 1.88% and composted for 42 days in a thermophilic 20 l composter with two replicates each. Alkaline materials at 1.88% CaCO(3) equivalent successfully buffered the pH during the composting and enhanced the decomposition efficiency. When these buffering was achieved with CFA+lime, the composting period could be shortened to approximately 28 days compared with approximately 42 days in 3% lime. Organic decomposition in terms of CO(2) loss, carbon turnover and nitrogen transformation were significantly higher for treatments with 1.88% CaCO(3) equivalent. Nutrient transformations and compost maturity parameters indicated that addition of CFA (5-10%) with lime at 1.88% CaCO(3) equivalent enhances the decomposition efficiency and shortens the composting period by 35%.