ABSTRACT
An improved design of CMOS 256-pixel photovoltaic-powered implantable chip for subretinal prostheses is presented. In the proposed subretinal chip, a high-efficiency fully-integrated 4× charge pump is designed and integrated with on-chip photovoltaic (PV) cells and a 256-pixel array with active pixel sensors (APS) for image light sensing, biphasic constant current stimulators, and electrodes. Thus the PV voltage generated by infrared (IR) light can be boosted to above 1V so that the charge injection is increased. The proposed chip adopts the 32-phase divisional power supply scheme (DPSS) to reduce the required supply current and thus the required area of the PV cells. The proposed chip is designed and fabricated in 180-nm CMOS image sensor (CIS) technology and post-processed with biocompatible IrOx electrodes and silicone packaging. From the electrical measurement results, the measured stimulation frequency is 28.3 Hz under the equivalent electrode impedance load. The measured maximum output stimulation current is 7.1 µA and the amount of injected charges per pixel is 7.36 nC under image light intensity of 3200 lux and IR light intensity of 100 mW/cm2. The function of the proposed chip has been further validated successfully with the ex vivo experimental results by recording the electrophysiological responses of retinal ganglion cells (RGCs) of retinas from retinal degeneration (rd1) mice with a multi-electrode array (MEA). The measured average threshold injected charge is about 3.97 nC which is consistent with that obtained from the patch clamp recording on retinas from wild type (C57BL/6) mice with a single electrode pair.
Subject(s)
Electrophysiological Phenomena , Retina , Animals , Electric Power Supplies , Electrodes , Mice , Mice, Inbred C57BL , Retina/diagnostic imaging , Retina/surgeryABSTRACT
The clinical workflow of using chromogenic agar and matrix-assisted laser desorption ionization time-of-fight mass spectrometry (MALDI-TOF MS) for Clostridium difficile identification was evaluated. The addition of MALDI-TOF MS identification after the chromID C. difficile chromogenic agar culture could significantly improve the diagnostic accuracy of C. difficile.
Subject(s)
Bacteriological Techniques/methods , Chromogenic Compounds/chemistry , Clostridioides difficile/isolation & purification , Culture Media/chemistry , Spectrometry, Mass, Matrix-Assisted Laser Desorption-Ionization/methods , Agar , Clostridioides difficile/classification , Clostridioides difficile/genetics , Clostridioides difficile/growth & development , Clostridium Infections/diagnosis , Clostridium Infections/microbiology , Color , Humans , Reproducibility of ResultsABSTRACT
BACKGROUND: Differentiation of Streptococcus pneumoniae from other viridans group streptococci is well known to be challenging in clinical laboratories. Matrix assisted laser desorption ionisation-time of flight mass spectrometry (MALDI-TOF MS) had been reported to be a good alternative for Streptococcus species level identification. However, differentiation of S. pneumoniae from other Streptococcus mitis group organisms was found to be problematic using the Bruker MALDI Biotyper system. METHODS: This study used the Bruker MALDI Biotyper system in addition to a mass spectra model analysis generated by 10 reference strains of S. pneumoniae, 8 strains of S. mitis and 2 strains of S. oralis in the ClinProTools to identify 28 clinical isolates of S. pneumoniae and 47 isolates of S. mitis/oralis. The results were compared with those generated by the MALDI Biotyper system alone. RESULTS: The percentages of correct species level identification using the MALDI Biotyper system alone and the direct transfer and extraction method were 66.7% (50/75) and 70.7% (53/75), respectively. With the additional ClinProTools mass spectra analysis, the percentages of correct identification by the direct transfer and extraction method increased to 85.3% (64/75) and 100% (75/75), respectively. This new workflow significantly improved the accuracy of S. pneumoniae and S. mitis/oralis identification. CONCLUSIONS: The additional ClinProTools mass spectra analysis with extraction method after MALDI Biotyper identification significantly improved the accuracy of identification among S. pneumoniae, S. oralis and S. mitis. The extra 15 min processing time of spectra analysis should be affordable in most clinical laboratories. We suggest that the same approach could be further explored in handling other bacterial species with high similarities.
