Small-Diameter Blood Vessel Substitutes: Biomimetic Approaches to Improve Patency.

Small-dimeter blood vessels (<6 mm) are required in coronary bypass and peripheral bypass surgery to circumvent blocked arteries. However, they have poor patency rates due to thrombus formation, intimal hyperplasia at the distal anastomosis, and compliance mismatch between the native artery and the graft. This review covers the state-of-the-art technologies for improving graft patency with a focus on reducing compliance mismatch between the prosthesis and the native artery. The focus of this article is on biomimetic design strategies to match the compliance over a wide pressure range.

Hybrid liposome-erythrocyte drug delivery system for tumor therapy with enhanced targeting and blood circulation.

Liposome, a widely used drug delivery system (DDS), still shows several disadvantages such as dominant clearance by liver and poor target organ deposition. To overcome the drawbacks of liposomes, we developed a novel red blood cell (RBC)-liposome combined DDS to modulate the tumor accumulation and extend the blood circulation life of the existing liposomal DDS. Here, RBCs, an ideal natural carrier DDS, were utilized to carry liposomes and avoid them undergo the fast clearance in the blood. In this study, liposomes could either absorbed onto RBCs' surface or fuse with RBCs' membrane by merely altering the interaction time at 37°C, while the interaction between liposome and RBCs would not affect RBCs' characteristics. In the in vivo antitumor therapeutic efficacy study, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) liposomes attached onto RBCs' surfaces exhibited lung targeting effect (via RBC-hitchhiking approach) and reduced clearance in the liver, while DPPC liposomes fused with RBCs had prolong blood circulation up to 48 h and no enrichment in any organ. Furthermore, 20 mol% of DPPC liposomes were replaced with pH-sensitive phospholipid 1,2-dioleoyl-Sn-glycero-3-phosphoethanolamine (DOPE) as it could respond to the low pH tumor microenvironment and then accumulate in the tumor. The DOPE attached/fusion RBCs showed partial enrichment in lung and about 5-8% tumor accumulation, which were significantly higher than (about 0.7%) the conventional liposomal DDS. Thus, RBC-liposome composite DDS is able to improve the liposomal tumor accumulation and blood circulation and shows the clinical application promises of using autologous RBCs for antitumor therapy.

Cell-mimicking polyethylene glycol-diacrylate based nanolipogel for encapsulation and delivery of hydrophilic biomolecule.

Lipid based nanoparticulate formulations have been widely used for the encapsulation and sustain release of hydrophilic drugs, but they still face challenges such as high initial burst release. Nanolipogel (NLG) emerges as a potential system to encapsulate and deliver hydrophilic drug while suppressing its initial burst release. However, there is a lack of characterization of the drug release mechanism from NLGs. In this work, we present a study on the release mechanism of hydrophilic Dextran-Fluorescein Isothiocyanate (DFITC) from Poly (ethylene glycol) Diacrylate (PEGDA) NLGs by using different molecular weights of PEGDA to vary the mesh size of the nanogel core, drawing inspiration from the macromolecular crowding effect in cells, which can be viewed as a mesh network of undefined sizes. The effect is then further characterized and validated by studying the diffusion of DFITC within the nanogel core using Fluorescence Recovery after Photobleaching (FRAP), on our newly developed cell derived microlipogels (MLG). This is in contrast to conventional FRAP works on cells or bulk hydrogels, which is limited in our application. Our work showed that the mesh size of the NLGs can be controlled by using different Mw of PEGDA, such as using a smaller MW to achieve higher crosslinking density, which will lead to having smaller mesh size for the crosslinked nanogel, and the release of hydrophilic DFITC can be sustained while suppressing the initial burst release, up to 10-fold more for crosslinked PEGDA 575 NLGs. This is further validated by FRAP which showed that the diffusion of DFITC is hindered by the decreasing mesh sizes in the NLGs, as a result of lower mobile fractions. These findings will be useful for guiding the design of PEGDA NLGs to have different degree of suppression of the initial burst release as well as the cumulative release, for a wide array of applications. This can also be extended to other different types of nanogel cores and other nanogel core-based nanoparticles for encapsulation and release of hydrophilic biomolecules.

Designing siRNA/chitosan-methacrylate complex nanolipogel for prolonged gene silencing effects.

Despite immense revolutionary therapeutics potential, sustaining release of active small interfering RNA (siRNA) remains an arduous challenge. The development of nanoparticles with siRNA sustained release capabilities provides an avenue to enhance the therapeutic efficacy of gene-based therapy. Herein, we present a new system based on the encapsulation of siRNA/chitosan-methacrylate (CMA) complexes into liposomes to form UV crosslinkable Nanolipogels (NLGs) with sustained siRNA-release properties in vitro. We demonstrated that the CMA nanogel in NLGs can enhance the encapsulation efficiency of siRNA and provide sustained release of siRNA up to 28 days. To understand the particle mechanism of cellular entry, multiple endocytic inhibitors have been used to investigate its endocytosis pathways. The study saw positively charged NLGs entering cells via multiple endocytosis pathways, facilitating endosomal escape and slowly releasing siRNA into the cytoplasm. Transfection experiments confirmed that the crosslinked NLG delivery system provides effective transfection and prolonged silencing effect up to 14 days in cell cultures. We expect that this sustained-release siRNA NLG platform would be of interest in both fundamental biological studies and in clinical applications to extend the use of siRNA-based therapies.

Anti-inflammatory potential of simvastatin loaded nanoliposomes in 2D and 3D foam cell models.

Atherosclerosis is a multifactorial disease triggered and sustained by risk factors such as high cholesterol, high blood pressure and unhealthy lifestyle. Inflammation plays a pivotal role in atherosclerosis pathogenesis. In this study, we developed a simvastatin (STAT) loaded nanoliposomal formulation (LIPOSTAT) which can deliver the drug into atherosclerotic plaque, when administered intravenously. This formulation is easily prepared, stable, and biocompatible with minimal burst release for effective drug delivery. 2D and 3D in vitro models were examined towards anti-inflammatory effects of STAT, both free and in combination with liposomes. LIPOSTAT induced greater cholesterol efflux in the 2D foam cells and significantly reduced inflammation in both 2D and 3D models. LIPOSTAT alleviated inflammation by reducing the secretion of early and late phase pro-inflammatory cytokines, monocyte adherence marker, and lipid accumulation cytokines. Additionally, the 3D foam cell spheroid model is a convenient and practical approach in testing various anti-atherosclerotic drugs without the need for human tissue.

Targeting efficiency of nanoliposomes on atherosclerotic foam cells: polyethylene glycol-to-ligand ratio effects.

BACKGROUND: Nanoparticles that actively target tissues, with ligands attached at the extremity of polyethylene glycol (PEG) spacer, are a promising strategy to enhance target cell specificity and internalization. However, the interplay between the targeting ligands and the adjacent ligand-free PEG remains poorly understood. RESEARCH DESIGN AND METHODS: Experimentally, liposomes containing active folate ligands were firstly formulated and the optimum amount of ligand that yields the highest foam cell uptake was determined. Subsequently, ligand-free PEG was incorporated, and the effects of PEG lengths and concentrations on foam cell uptake were evaluated after the nanoparticles were incubated in human serum for 90 min. RESULTS: It was demonstrated that the targeting efficiency progressively decreased and was eventually annulled as PEG-to-ligand ratio was increased, with loss of targeting effect occurring at PEG-to-ligand ratio of >2 for PEG 750, >0.5 for PEG 2000 and <0.5 for PEG 5000. CONCLUSIONS: This work demonstrates that PEG-to-ligand ratio and serum coating on nanoparticle surface are both important features to be considered in the design of active targeting nanocarriers. This work also supports the development of novel active targeting nanotherapies for atherosclerosis.

Microfluidic-directed self-assembly of liposomes: Role of interdigitation.

Microfluidics has been used to process self-assembling liposomal systems that are commonly considered for drug delivery applications. However, it has been found that the parameters of the process are not universally suited for all lipid types. We hypothesize here that size aggregation and instability of microfluidic liposomes are a direct consequence of the presence of interdigitation in these liposomes. Interdigitation refers to the phenomenon where two opposing leaflets of a bilayer interpenetrate into one another and form a single layer. When this happens, aggregation results as the single layer is not thermodynamically stable. Such interdigitation can be induced by pressure, chemicals or by the type of lipid structure. In this study, we systematically investigate the role of lipid composition on membrane interdigitation in order to understand the dependency of lipid interdigitation on liposome formation by microfluidics. By doing so, we use nano DSC and SAXS to probe the extent of lipid interdigitation by measuring the changes in thermodynamics and membrane thickness of the lipid bilayers. Our results show that microfluidic-fabricated liposomes undergo chemical interdigitation in the presence of ethanol, in particular saturated 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC). Strategies to prevent interdigitation is to either remove ethanol above the lipid's main transition temperature (Tm), preventing the formation of interdigitated structures and subsequent aggregated states or by the incorporation of the inhibiting additives, such as cholesterol.

Liposomal Nanotherapy for Treatment of Atherosclerosis.

Atherosclerosis is a chronic disease that can lead to life-threatening events such as myocardial infarction and stroke, is characterized by the build-up of lipids and immune cells within the arterial wall. It is understood that inflammation is a hallmark of atherosclerosis and can be a target for therapy. In support of this concept, an injectable nanoliposomal formulation encapsulating fluocinolone acetonide (FA), a corticosteroid, is developed that allows for drug delivery to atherosclerotic plaques while reducing the systemic exposure to off-target tissues. In this study, FA is successfully incorporated into liposomal nanocarriers of around 100 nm in size with loading efficiency of 90% and the formulation exhibits sustained release up to 25 d. The anti-inflammatory effect and cholesterol efflux capability of FA-liposomes are demonstrated in vitro. In vivo studies carried out with an apolipoprotein E-knockout (Apoe-/- ) mouse model of atherosclerosis show accumulation of liposomes in atherosclerotic plaques, colocalization with plaque macrophages and anti-atherogenic effect over 3 weeks of treatment. This FA-liposomal-based nanocarrier represents a novel potent nanotherapeutic option for atherosclerosis.

Inclusion of Cross-Linked Elastin in Gelatin/PEG Hydrogels Favourably Influences Fibroblast Phenotype.

The capacity of a biomaterial to innately modulate cell behavior while meeting the mechanical property requirements of the implant is a much sought-after goal within bioengineering. Here we covalently incorporate soluble elastin into a gelatin-poly (ethylene glycol) (PEG) hydrogel for three-dimensional (3D) cell encapsulation to achieve these properties. The inclusion of elastin into a previously optimized gelatin-PEG hydrogel was then evaluated for effects on entrapped fibroblasts, with the aim to assess the hydrogel as an extracellular matrix (ECM)-mimicking 3D microenvironment for cellular guidance. Soluble elastin was incorporated both physically and covalently into novel gelatin/elastin hybrid PEG hydrogels with the aim to harness the cellular interactivity and mechanical tunability of both elastin and gelatin. This design allowed us to assess the benefits of elastin-containing hydrogels in guiding fibroblast activity for evaluation as a potential dermal replacement. It was found that a gelatin-PEG hydrogel with covalently conjugated elastin, supported neonatal fibroblast viability, promoted their proliferation from 7.3% to 13.5% and guided their behavior. The expression of collagen alpha-1(COL1A1) and elastin in gelatin/elastin hybrid gels increased 16-fold and 6-fold compared to control sample at day 9, respectively. Moreover, cells can be loaded into the hydrogel precursor solution, deposited, and the matrix cross-linked without affecting the incorporated cells adversely, thus enabling a potential injectable system for dermal wound healing.

Nanolipogels as a cell-mimicking platform for controlled release of biomacromolecules.

We present studies of protein (insulin) efflux rates from nano-sized core-shell systems with a gelled core and a lipid bilayer (nanolipogels). The efflux control mechanism is the manipulation of mesh size, and we show that diffusion control via crosslinking is the dominant mechanism for efflux control. The concept is inspired by the macromolecular crowding effect in human cells, which may be considered as a physical network of undefined mesh size. Our bio-inspired system is made of chemically crosslinked water-swellable poly(ethylene glycol) diacrylate cores, whose mesh size can be manipulated to yield a quantifiable crowding effect that then leads to predictable release rates for biomacromolecules.

Recent Advances in Chitosan-Based Carriers for Gene Delivery.

Approximately 4000 diseases are associated with malfunctioning genes in a particular cell type. Gene-based therapy provides a platform to modify the disease-causing genes expression at the cellular level to treat pathological conditions. However, gene delivery is challenging as these therapeutic genes need to overcome several physiological and intracellular barriers in order, to reach the target cells. Over the years, efforts have been dedicated to develop efficient gene delivery vectors to overcome these systemic barriers. Chitosan, a versatile polysaccharide, is an attractive non-viral vector material for gene delivery mainly due to its cationic nature, biodegradability and biocompatibility. The present review discusses the design factors that are critical for efficient gene delivery/transfection and highlights the recent progress of gene therapy using chitosan-based carriers.

The Potential of Fluocinolone Acetonide to Mitigate Inflammation and Lipid Accumulation in 2D and 3D Foam Cell Cultures.

Inflammation plays an important role in all stages of atherosclerosis development. Therefore, the use of anti-inflammatory drugs could reduce the risk of major adverse cardiovascular events due to atherosclerosis. Herein, we explored the capacity of fluocinolone acetonide (FA), a glucocorticoid (GC), in modulating foam cell formation and response. Human THP-1 derived foam cells were produced using 100 µg/mL oxidized low-density lipoproteins (OxLDL) and fetal bovine serum (1 and 10%). 2D cultures of these cells were treated with FA (0.1, 1, 10, and 50 µg/mL) in comparison with dexamethasone (Dex). Results showed that treatment with 0.1 and 1 µg/mL FA and Dex improved foam cell survival. FA and Dex also inhibited inflammatory cytokine (CD14, M-CSF, MIP-3α, and TNF-α) secretion. Notably, at the concentration of 1 µg/mL, both FA and Dex reduced cholesteryl ester accumulation. Compared to Dex, FA was significantly better in reducing lipid accumulation at the therapeutic concentrations of 1 and 10 µg/mL. In a novel 3D foam cell spheroid model, FA was shown to be more effective than Dex in diminishing lipid accumulation, at the concentration of 0.1 µg/mL. Taken together, FA was demonstrated to be effective in preventing both lipid accumulation and inflammation in foam cells.

Water-Responsive Shape Recovery Induced Buckling in Biodegradable Photo-Cross-Linked Poly(ethylene glycol) (PEG) Hydrogel.

The phenomenon of recovering the permanent shape from a severely deformed temporary shape, but only in the presence of the right stimulus, is known as the shape memory effect (SME). Materials with such an interesting effect are known as shape memory materials (SMMs). Typical stimuli to trigger shape recovery include temperature (heating or cooling), chemical (including water/moisture and pH value), and light. As a SMM is able not only to maintain the temporary shape but also to respond to the right stimulus when it is applied, via shape-shifting, a seamless integration of sensing and actuation functions is achieved within one single piece of material. Hydrogels are defined by their ability to absorb a large amount of water (from 10-20% up to thousands of times their dry weight), which results in significant swelling. On the other hand, dry hydrogels indeed belong to polymers, so they exhibit heat- and chemoresponsive SMEs as most polymers do. While heat-responsive SMEs have been spotted in a handful of wet hydrogels, so far, most dry hydrogels evince the heat and water (moisture)-responsive SMEs. Since water is one of the major components in living biological systems, water-responsive SMMs hold great potential for various implantable applications, including wound healing, intravascular devices, soft tissue reconstruction, and controlled drug delivery. This provides motivation to combine water-activated SMEs and swelling in hydrogels together to enhance the performance. In many applications, such as vascular occlusion via minimally invasive surgery for liver cancer treatment, the operation time (for both start and finish) is required to be well controlled. Due to the gradual and slow manner of water absorption for water-activated SMEs and swelling in hydrogels, even a combination of both effects encounters many difficulties to meet the timerequirements in real procedures of vascular occlusion. Recently, we have reported a bioabsorbable radiopaque water-responsive shape memory embolization plug for temporary vascular occlusion. The plug consists of a composite with a poly(dl-lactide-co-glycolide) (PLGA) core (loaded with radiopaque filler) and cross-linked poly(ethylene glycol) (PEG) hydrogel outer layer. The device can be activated by body fluid (or water) after about 2 min of immersion in water. The whole occlusion process is completed within a few dozens of seconds. The underlying mechanism is water-responsive shape recovery induced buckling, which occurs in an expeditious manner within a short time period and does not require complete hydration of the whole hydrogel. In this paper, we experimentally and analytically investigate the water-activated shape recovery induced buckling in this biodegradable PEG hydrogel to understand the fundamentals in precisely controlling the buckling time. The molecular mechanism responsible for the water-induced SME in PEG hydrogel is also elucidated. The original diameter and amount of prestretching are identified as two influential parameters to tailor the buckling time between 1 and 4 min as confirmed by both experiments and simulation. The phenomenon reported here, chemically induced buckling via a combination of the SME and swelling, is generic, and the study reported here should be applicable to other water- and non-water-responsive gels.

Translation in cardiovascular stents and occluders: From biostable to fully degradable.

Cardiovascular disease is a major cause of morbidity and mortality, especially in developed countries. Most academic research efforts in cardiovascular disease management focus on pharmacological interventions, or are concerned with discovering new disease markers for diagnosis and monitoring. Nonpharmacological interventions with therapeutic devices, conversely, are driven largely by novel materials and device design. Examples of such devices include coronary stents, heart valves, ventricular assist devices, and occluders for septal defects. Until recently, development of such devices remained largely with medical device companies. We trace the materials evolution story in two of these devices (stents and occluders), while also highlighting academic contributions, including our own, to the evolution story. Specifically, it addresses not only our successes, but also the challenges facing the translatability of concepts generated via academic research.

Bioabsorbable radiopaque water-responsive shape memory embolization plug for temporary vascular occlusion.

We describe the preparation, characterization and evaluation of a biodegradable radiopaque water-triggered shape memory embolization plug for temporary vascular occlusion. The shape memory occluding device consists of a composite of a radio-opaque filler and a poly (dl-lactide-co-glycolide) (PLGA) blend, which was coated with a crosslinked poly (ethylene glycol) diacrylate (PEGDA) hydrogel. The mechanical properties, the degradation timeframe, the effect of programming conditions on the shape memory behaviour and the extent of radio-opacity for imaging were evaluated. Based on the tests, the mechanism responsible for the water-induced shape memory effect in such an embolization plug was elucidated. Suitable materials were optimized to fabricate an embolic plug prototype and its in vitro performance was evaluated as an occlusion rate (using a custom-built set up) and its biocompatibility. Finally, a feasibility study was conducted in vivo in a rabbit model to investigate the ease of device deployment, device migration and extent of vessel occlusion. The in vivo results demonstrated that the prototypes were visible under fluoroscopy and complete vascular occlusion occurred within 2 min of deployment of the prototypes in vivo. In conclusion, the developed embolization plug enables controlled and temporary vascular embolization, and is ready for safety studies.

Attitude, Acceptability and Knowledge of HPV Vaccination among Local University Students in Hong Kong.

The Human Papillomavirus (HPV) vaccine has the great potential to prevent HPV-related infections for millions of women and men worldwide. However, the success of the vaccine is highly dependent on the vaccination rate. Factors influencing the attitudes of undergraduate students towards HPV vaccination should be studied. This is a cross-sectional survey that was conducted to estimate the HPV vaccination rate among undergraduate students in Hong Kong, and to identify the predictors of their attitude towards HPV vaccination. The results showed that the HPV vaccination rate was 13.3%. Factors related to knowledge of vaccination were the main predictors of the students' attitude towards vaccination (there were seven predictors, with B = 1.36 to 2.30; p < 0.05), followed by gender (B = -1.40; p < 0.05), acceptable maximum price (B = 0.35; p < 0.05), and willingness to receive the HPV vaccine if it can protect against cervical/anal cancer and genital warts (B = -1.90; p < 0.001). The regression model that was developed based on the predictors had a moderate effect size (adj-R² = 0.33). To conclude, the HPV vaccination rate among undergraduate students in Hong Kong was low. They should be provided with more active education and activities to promote HPV vaccination to improve their knowledge on the subject.

A fully biodegradable patent ductus arteriosus occlude.

The purpose of this study was to develop a fully degradable occluder for the closure of PDA, which can be deployed percutaneously. The blends of biodegradable poly(ε-caprolactone) and poly(L-lactide-co-ε-caprolactone) with various compositions were studied as the potential material. The mechanical properties, i.e. elastic modulus and strain recovery, of the blends could be largely tailored by changing the continuous phase component. Moreover, the suitable blends were selected to fabricate a prototype and its in vitro biodegradation rate and blood compatibility, was evaluated. The current results indicate that no adverse effect on the platelet and leukocyte components of the blood. Biocompatibility implantation studies of the device showed acceptable tissue response. Finally, an artificial PDA conduit was created in a pig, and the device deployment was tested from a sheath: the device recovered within 2-3 min of unsheathing and fully sealed the conduit.

The mechanical behavior and biocompatibility of polymer blends for Patent Ductus Arteriosus (PDA) occlusion device.

Patent Ductus Arteriosus (PDA) is a cardiovascular defect that occurs in 1 out of every 2000 births, and if left untreated, may lead to severe cardiovascular problems. Current options for occluding utilize meta scaffolds with polymer fabric, and are permanent. The purpose of this study was to develop a fully degradable occluder for the closure of PDA, that can be deployed percutaneously without open-heart surgery. For percutaneous deployment, both elasticity and sufficient mechanical strength are required of the device components. As this combination of properties is not achievable with currently-available homo- or copolymers, blends of biodegradable poly(ε-caprolactone) (PCL) and poly(L-lactide-co-ε-caprolactone) (PLC) with various compositions were studied as the potential material for the PDA occlusion device. Microstructures of this blend were characterized by differential scanning calorimetry (DSC) and tensile tests. DSC results demonstrated the immiscibility between PCL and its copolymer PLC. Furthermore, the mechanical properties, i.e. elastic modulus and strain recovery, of the blends could be largely tailored by changing the continuous phase component. Based on the thermo-mechanical tests, suitable blends were selected to fabricate a prototype of PDA occluder and its in vitro performance, in term of device recovery (from its sheathed configuration), biodegradation rate and blood compatibility, was evaluated. The current results indicate that the device is able to recover elastically from a sheath within 2-3min for deployment; the device starts to disintegrate within 5-6 months, and the materials have no adverse effects on the platelet and leucocyte components of the blood. Biocompatibility implantation studies of the device showed acceptable tissue response. Finally, an artificial PDA conduit was created in a pig model, and the device deployment was tested from a sheath: the device recovered within 2-3min of unsheathing and fully sealed the conduit, the device remains stable and is completely covered by tissue at 1 month follow up. Thus, a novel prototype for PDA occlusion that is fully degradable has been developed to overcome the limitations of the currently used metal/fabric devices.

Development of a novel biodegradable drug-eluting ventilation tube for chronic otitis media with effusion.

OBJECTIVES/HYPOTHESIS: To develop a novel drug-eluting biodegradable ventilation tube (VT), to evaluate in vitro sustained release and antibacterial adherence of ofloxacin-loaded biodegradable VT on Pseudomonas aeruginosa, and to evaluate in vivo biodegradation of VT in guinea pig ears. STUDY DESIGN: A randomized animal study. METHODS: In vitro drug release and degradation of ofloxacin-loaded VT were studied in water for 3 months. Bacterial adherence was evaluated by inoculating the VT with P aeruginosa suspension for 6 days. Scanning electron microscopy (SEM) was used for morphologic analysis. Guinea pigs were assigned to three groups: commercial Mini Shah VT, biodegradable unloaded VT, and biodegradable ofloxacin-loaded VT. Myringotomy and VT insertion were performed. SEM of VTs and histology were performed at 2, 4, 10, and 18 weeks. RESULTS: A total of 81.7% of ofloxacin in VT was eluted over 3 months. Biodegradable VTs had smoother surfaces and less bacteria adherence compared to Mini Shah VTs. VTs with ofloxacin had the least bacteria adherence. VTs resulted in neither inflammation nor otorrhea 18 weeks postinsertion in guinea pigs. Histology showed the new VTs were biocompatible. The VTs were still functioning and patent after 18 weeks postinsertion but had started degrading. CONCLUSIONS: The first novel biodegradable ofloxacin-loaded VT with sustainable drug release technology and antibacterial adherence property was studied. Patency beyond 4.5 months allowed an adequate period of ventilation. The complete degradation of the VT warrants further studies to evaluate the duration of VT resorption in situ and healing of the ear drum.

Human mesenchymal stem-cell behaviour on direct laser micropatterned electrospun scaffolds with hierarchical structures.

Direct laser machining and electrospinning are utilized to obtain a bi-layered hybrid scaffold with hierarchical topographical features to mimic extracellular matrix-like microenvironment of cells. Adult bone marrow derived human mesenchymal stem cells (hMSCs) are cultured in vitro in these hybrid scaffolds, and cell orientation, proliferation, viability, and differentiation are evaluated. The results show that this novel hybrid scaffold not only supports cell growth like traditional scaffolds, but also elicits positive responses from the cells, like lineage commitment and alignment, which are essential features of future scaffolds.