ABSTRACT
Background: Accessory infraorbital foramen (AIOF) can change the normal course of emerging branches of the infraorbital nerve and blood vessels exiting the infraorbital foramen (IOF). This study aimed to examine the AIOF, number of foramina, and their position in relation to IOF using cone-beam computed tomography (CBCT). Methods: We performed a retrospective CBCT assessment of hospital records between January 2018 and August 2022. The CBCT of 507 patients were examined to extract information on the prevalence, number, position, linear distance from the IOF, and diameter of AIOF in relation to demographic factors. Descriptive statistics were used to evaluate the prevalence of AIOF. Mean and standard deviation were used to calculate the linear distance and diameter of the AIOF, respectively. The AIOFs, its distribution, and number were compared between sexes and sides using the chi-square test. The independent t-test and Mann-Mann-Whitney test were used to compare the mean difference between the sexes and sides. Statistical significance was set at P < 0.05. Results: In this current study, the prevalence of AIOF was 7.1% (36 of the 507 patients). Additionally, the current study examined the number of foramina using a single foramen on each side and double foramina located bilaterally at a distance from the AIOF to the IOF. The mean AIOF diameter was also studied, and the AIOF position with respect to the IOF on CBCT was superomedial or inferomedial. There were no statistically significant associations between any of the parameters assessed in this study when comparing sex and sides. Conclusions: A greater number of patients with AIOF presented with a single foramen and unilateral occurrence, without a statistically significant difference. The AIOF was most commonly located superomedial to the IOF.
ABSTRACT
Dental implants have been utilized for many years to treat individuals with missing teeth. To optimize the long-term success rate of such implants, new designs, surfaces, and materials have been analyzed. It is important for the clinician to have a background in the field of implant surface design, to be familiar with the strengths and limitations of the available options, and to be aware of the alterations in surface structure that may occur following installation. This article provides a detailed review of the structure and the surface characteristics of dental implants, the modifications of implant surface, as well as the methods of evaluating implant surface structure. Moreover, it provides information concerning the structural changes that may take place at the time of dental implant placement. It is important for clinicians to be aware of such changes to plan and execute implant procedures with the highest possible success and implant survival rates.
ABSTRACT
Background: Mental disorders are indeed an expanding threat, which requires raised awareness, education, prevention, and treatment initiatives nationally and globally. This review presents an updated review on the relationships between oral health and mental health disorders and the importance of oral health in mental health disorders. Method: A literature search was done regarding mental disorders and oral health approaches in Google Scholar and PubMed from the year 1995 until 2023. All the English-language papers were evaluated based on the inclusion criteria. Publications included original research papers, review articles and book chapters. Results: Common mental disorders include depression, anxiety, bipolar disorder, Schizophrenia, dementia, and alcohol and drug use disorders. The interplay of oral health and mental disorders involves dysregulated microbiome, translocated bacteria, and systemic inflammation, among others. Conclusion: There is a complex relationship between mental disorders and oral diseases. Various oral health problems are associated with mental health problems. The interplay of oral health and mental disorders involves dysregulated microbiome, translocated bacteria, and systemic inflammation, among others. Mental health nurses including physicians and dental professionals should be involved in the oral health care of mental health disorder patients. Therefore, multidisciplinary should be involved in the care of mental health disorders, and they should consider oral health care as an essential part of their care for patients with mental health disorders. Future investigations should strive to elucidate the exact biological relationships, to develop new directions for treatment.
ABSTRACT
The high success rate of dental treatment is dependent on the cooperation of pediatric patients during procedures. Dental treatment often causes pain, particularly in children. The factors in providing treatment to pediatric patients include the characteristics and location of the tooth, profoundness of the anesthesia including the type of local anesthetic, and cooperation of the patient. Previous studies have examined several techniques to successfully achieve profound pulpal anesthesia in maxillary permanent teeth. The dentist should select the injection technique to be used based on patient needs. In children, either buccal with palatal injections or buccal with intra-septal injections may be used to anesthetize the permanent maxillary first molar. Buccal with palatal injections are commonly used prior to routine maxillary dental procedures. Currently, there are only a few studies on the employment of buccal with intra-septal injections to anesthetize permanent maxillary first molars in pediatric patients. This review will focus on efficacy of buccal with palatal versus buccal with intra-septal pulpal anesthesia of the permanent maxillary first molars in pediatric patients and aim to determine which technique should be used during routine dental procedures.
ABSTRACT
Little has been studied regarding the repeated usage of healing abutments and their effects on the distortion of dental implant-healing abutment hex surfaces. Additionally, implant manufacturers do not provide specific guidelines on how many times a healing abutment can be used before discarding. Therefore, we evaluated the effect of repeated screwing-unscrewing of implant-healing abutment on the healing abutment hex surface and screw head. A total of 12 Biomate implants with 4 mm diameter and 13 mm length were inserted into a synthetic bone block. The standard healing abutments of 3 mm diameter and 4 mm length were screwed onto each implant using a torque ratchet at a final torque of 30 Ncm. Immediately, the abutments were unscrewed at 30 Ncm. Then, screwing-unscrewing was repeated for 4, 8, 16, 24, 32, 40, 80, 160, 320, and 400 times and the healing abutments were scanned under the scanning electron microscope for any distortion. Distortion was graded as 0, 1, 2, and 3. Data were analyzed using SPSS 24.0. Descriptive statistics were calculated. One-way ANOVA with post hoc using Tukey's HSD test was performed to analyze the difference in distortion at different screwing-unscrewing times. A significant level was selected at p-value = 0.05. It was found that distortion healing abutments screws were seen after 32 times screwing and unscrewing. There was a significant difference in the distortion (p-value < 0.05) after 24 times of repeated usage of healing abutment and at 160, 320, and 400 times. No surface distortions were observed at the healing abutment screw head at 4, 8, 16, 24, 32, 40, 80, 160, 320, and 400 cycles of screwing-unscrewing. It can be concluded that repeated screwing and unscrewing of the implant-healing abutments causes damage to the healing abutment hex surface. The distortion of healing abutments screws was seen after 32 times screwing and unscrewing. No surface distortions were observed on the healing abutment screw head until 400 times of screwing and unscrewing. Hence, the clinician should be cautious while using the healing abutments repeatedly.
ABSTRACT
Impacted lower second molars (ILM2) are rarely reported in the literature, but various studies have been done for its treatment. Apart from solely orthodontic approaches, different surgical management techniques were reported to have successful outcomes. Surgical intervention of ILM2 can help expose the tooth for further orthodontic purposes, simplifying complex treatment methods, and reducing treatment time. This review illustrates the comprehensive evaluation and updated methods of surgical uprighting, repositioning, and transplantation of ILM2 with future directions for better understanding and treatment planning in the clinical setting. The successful outcome of surgical intervention depends on case selection, root development of ILM2, careful surgical manipulation, and adherence to sound biological principles.
ABSTRACT
OBJECTIVES: The aim of this study was to evaluate and compare penetration ability and tensile strength among vinylsiloxanether (VSE), polyether (PE), and polyvinylsiloxane (PVS) elastomeric dental impression materials. MATERIALS AND METHODS: The models were constructed for penetration ability test by simulated gingival sulcus width and moist environment. The 0.05, 0.1, and 0.2 mm of simulated gingival sulcus widths were used. Each simulated gingival sulcus width was impressed 10 repeats per one elastomeric impression material. All extension of elastomeric dental impression materials was scaled by Measuring Microscope (MM-11; Nikon, Tokyo, Japan). On the issue of the tensile strength study, the models were constructed following type 1 of the ISO 37:2017 specifications and/or type C of ASTM.D412 specifications. The two-way analysis of variance (ANOVA) and Tukey's honest significant difference test were performed in the penetration ability test. The one-way ANOVA and Dunnett's T3 test were performed in the tensile strength test. The significance level was set at 0.05. RESULTS: PE showed the best extension into all widths of simulated sulcus followed by VSE and PVS, respectively. PVS was significantly higher in tensile strength than VSE and PE, while VSE was significantly higher than PE. CONCLUSION: Penetration ability of elastomeric dental impression materials was depended on gingival sulcus width. The wider the sulcular width, the better the penetration ability of elastomeric dental impression materials. PE presented the best penetration ability, while the novel PVS showed highest tensile strength.
ABSTRACT
Verruca vulgaris, also known as common warts, is most often seen on the skin of hands and feet. Human papilloma virus (HPV) plays an aetiological role in the development of this lesion. Oral verruca vulgaris (OVV) may occur on the palate, buccal mucosa, and tongue. Although asymptomatic and benign, HPV has been linked to squamous cell carcinoma in the oral cavity and oropharyngeal areas. Therefore, prompt surgical removal of OVV is warranted. We report a case of a OVV in a 48-year-old male patient on palate. The lesion was a white nonscrapable lesion in the middle of a torus palatinus. Excisional biopsy was done together with surgical removal of torus palatinus. Histopathological analysis confirmed the diagnosis of OVV.
ABSTRACT
Dexamethasone has been used in oral and maxillofacial surgery for postoperative pain, swelling, and trismus following third molar surgeries. It is a potent and powerful drug that can alleviate the aforementioned postoperative sequelae. Dexamethasone is responsible for inhibiting the release of inflammatory mediators in the inflammation process to improve patient quality of life after surgical intervention. There are several available routes of administering dexamethasone. This article will help determine the suggested routes of administration, dosage, parameters, and dexamethasone timing for third molar surgeries.
ABSTRACT
Silver nanoparticles (AgNPs) have been taken advantage of in dentistry because of their good antibacterial resistance and self-sustaining potential. However, in oral and maxillofacial surgery and implantology, there is a lesser amount of evidence. The few pieces of evidence need to be accentuated for possible amplification of its use in the dental setting. AgNPs in oral and maxillofacial surgery can be used in wound healing, bone healing, extractions, guided tissue regeneration, apical surgeries, oral cancer, and dental implants. This review aims to feature the utilization and application of AgNPs in oral and maxillofacial surgery and implant dentistry, emphasizing its need for potential future development in clinical settings.
ABSTRACT
Over the years, the pain has been defined numerous times in several ways. In oral and maxillofacial surgery, the occurrence of pain, especially postoperatively, is anticipated. Pain arises as a combination of various processes after tissue damage. Distinct pain experiences in oral surgery were depicted in several previous studies, adding knowledge to the field. The management of these encounters has been suggested over time, improving treatment approaches in the clinical setting. This review aims to understand the pain and its types and intervention in the field of oral and maxillofacial surgery.
ABSTRACT
BACKGROUND: Impacted mandibular third molar removal is one of the most commonly performed oral surgical procedures. This procedure can lead to several postoperative complications, such as trismus, facial swelling, and pain, which occur as a result of the inflammatory responses to surgery. This study compared the efficiency of preoperative injections of 4 mg versus 8 mg dexamethasone into the pterygomandibular space to reduce postoperative sequelae. METHODS: This was a randomized, prospective, split-mouth, controlled study, including 52 mandibular third molar surgeries in 26 patients. Each patient was randomized to either the 4 mg or 8 mg dexamethasone injection group. Dexamethasone was injected into the pterygomandibular space after numbness from local anesthesia. Data were collected for trismus, facial swelling, visual analog scale (VAS) pain score, and the number of analgesics taken during the evaluation period. The level of significance was set at P < 0.05. RESULTS: Statistically significant differences in postoperative facial swelling (P = 0.031, diff = 1.4 mm) and pain (P = 0.012, diff = 0.020) were found between the 8 mg and 4 mg dexamethasone groups. However, there were no significant differences between the groups for trismus and the total number of analgesics consumed (P > 0.05). CONCLUSION: Compared to the 4 mg preoperative dexamethasone injection, the 8 mg preoperative dexamethasone injection into the pterygomandibular space was more effective in reducing postoperative swelling and pain following the surgical removal of the impacted mandibular third molar. However, the difference in trismus could not be evaluated clinically. Therefore, the recommendation of administering the 4 mg dexamethasone preoperative injection is optimal in the third molar surgical procedure.
ABSTRACT
To analyze physicochemical such as surface structures, the crystallinity, chemical composition, calcium phosphate dissolution and osteogenic properties of tooth derived bone substitute (TDBS) processed chair-side and other grafting materials. The number of anaerobic and facultative anaerobic bacteria in the supernatant of processed TDBS was determined. Human osteoblasts were co-cultured with TDBS or allograft in transwell system to examine cell migration. BMP2 released from TDBS was measured by ELISA. TDBS had high crystallinity similar to BoneCeramic while it had a broad pattern to ramus bone, OraGRAFT, and Bio-Oss. TDBS contained carbon, calcium, oxygen, phosphate, sodium and magnesium elements like others. Calcium/phosphorus dissolution of TDBS show closely related to those of mandibular ramus bone and OraGRAFT. In addition, microbial decontamination of TDBS by the chemical processing revealed a hundred percent efficacy. The osteoconductive and osteoinductive properties demonstrated in the TDBS processed chairside suggested the potential of an alternative for bone grafting material.
Subject(s)
Bone Substitutes , Tooth , Bone Regeneration , Bone Transplantation , Bone and Bones , Humans , OsteogenesisABSTRACT
OBJECTIVES: The goal of this retrospective study was to determine the significance and impact of several factors on the alveolar cleft bone grafting procedure. MATERIALS AND METHODS: The medical records were reviewed. In addition, x-rays were checked. The size of every cleft was measured in this retrospective study. The analyzed factors included sex, age, type of cleft, size of the cleft, and the type of flap used in surgery. The patients were characterized into group A (no complications, Bergland scale 1 or 2), group B (complications or Bergland scale 3), or group C (failure cases). Statistical analysis was performed with a P-value set at 0.05. RESULTS: There were 32 cases in group A, 26 in group B, and 9 in group C. Multinomial logistic regression showed an association between the type of the cleft and the size of the cleft, with the presence of complications, or achieving type 3 on the Bergland scale, with odds ratios of 5.118 and 6.000, respectively. The type of cleft was related to failure with an odds ratio of 4.833. Given a small sample, statistical analysis could not be performed to evaluate the relationship between the size of the cleft and group C. Age, sex, and the type of the flap were not significant factors. CONCLUSION: The cleft size of more than 10 mm and bilateral clefts were listed regarding their effect on the procedure. Clinicians should not overlook these factors. In addition, patients must be informed of any risks that are present.
ABSTRACT
BACKGROUND: Previous studies have investigated the effects of dexamethasone injections into the pterygomandibular space and compared them to those of controls; however, the effects of dexamethasone injections before and after lower third molar surgery on postoperative complications have not been studied. This research investigated the postoperative sequelae of dexamethasone injections before and after surgery into the pterygomandibular space. The aim of this study was to evaluate the effects of preoperative and postoperative injections of 4 mg of dexamethasone into the pterygomandibular space on postoperative pain, facial swelling, and the restriction of mouth opening following lower third molar surgical removal. METHODS: Twenty-seven participants with bilateral symmetrical lower impacted third molars were included in this study. Each participant was randomly allocated to one of two groups. Group A received injections of 1 ml dexamethasone (4 mg/mL) and 1 mL placebo into the pterygomandibular space before and after surgery, respectively. Group B received the same doses of placebo before surgery and dexamethasone after surgery. RESULTS: A significant restriction of mouth opening on the second postoperative day was observed in both groups. Nonetheless, the postoperative restriction of mouth opening, facial swelling, postoperative pain, and analgesic consumption after lower third molar surgical removal were not significantly different in the two groups. CONCLUSIONS: Regardless of the time of administration, dexamethasone injections into the pterygomandibular space resulted in satisfactory control of the postoperative sequelae of the mandibular third molar surgical removal.
ABSTRACT
BACKGROUND: Corticosteroids have been widely used by oral surgeons for reducing swelling caused by wisdom teeth surgery. However, they have not been proven to decrease pain. This study was aimed at analyzing previous studies pertaining to corticosteroids and pain reduction following wisdom teeth surgery. METHODS: The Science Direct, PubMed, and MEDLINE databases were searched for relevant journals according to a systematic search strategy (Patient Intervention Comparison Outcome Study). Randomized controlled trials published in English from 1998 to 2017 were extracted. RESULTS: Twenty-seven articles were included, with a total of 36 comparative cases. Methylprednisolone and dexamethasone were the most commonly used corticosteroids. Intramuscular injections of corticosteroids were optimal for pain reduction, regardless of the time of administration. CONCLUSIONS: Corticosteroids can be used as an adjuvant for pain reduction following wisdom teeth surgery. Methylprednisolone and dexamethasone delivered via the intramuscular route is the best method for effective pain reduction. The ideal time for administration of corticosteroids is the preoperative period.
ABSTRACT
BACKGROUND: This research evaluated the numbness produced by lignocaine at an equal or higher concentration than that of 4% articaine through a single point of injection for maxillary third molar surgery. This randomized double-blind study was conducted to compare the anesthetic efficiency of 4% lignocaine with that of 4% articaine in impacted maxillary third molar surgery using a single buccal infiltration alone. METHODS: The study participants were 30 healthy patients requiring the bilateral surgical removal of symmetrically-positioned maxillary third molars. Using a split-mouth design, each patient randomly received buccal infiltration of 1.7 ml of 4% lignocaine and 1.7 ml of 4% articaine during two separate appointments. After 15 minutes of anesthetic injection, surgery was performed by the same surgeon using a consistent technique on both sides. Pinprick test pain scores of the buccal and palatal gingiva of the maxillary third molar after 10 minutes and 15 minutes latencies, pain scores during the surgery, the need for supplemental anesthesia, and patients' satisfaction with anesthetic efficiency were recorded. Surgery performed without supplemental anesthesia was categorized as successful. RESULTS: The success rates of 4% lignocaine and 4% articaine (83.34% vs. 86.67%, P = 1.00) were not significantly different. Only 5 cases (4 cases in the articaine group and 1 case in the lignocaine group) reported mild pain and pressure sensation (NRS ≤ 1) on probing at the palatal side after 15 minutes of latency (P = 0.25). The pain scores of maxillary third molar surgery in the two groups were not significantly different (P > 0.05). Moreover, the statistical analysis confirmed the comparable patient satisfaction of two study groups (P = 0.284). CONCLUSION: This study provides evidence that single buccal infiltrations of 4% lignocaine and 4% articaine have comparable anesthetic efficacy and success rates for impacted maxillary third molar surgery. Both 4% lignocaine and 4% articaine can produce effective palatal anesthesia and pain control using buccal infiltration alone after 15 minutes of latency.
ABSTRACT
OBJECTIVES: Palatal infiltration is the most painful and uncomfortable anesthesia technique for maxillary impacted third molar surgery (MITMS). This approach could cause patients distress and aversion to dental treatment. The aim of this study was to evaluate the anesthetic efficacy of a buccal infiltration injection without a palatal injection in MITMS. MATERIALS AND METHODS: This prospective research study was a crossover split mouth-randomized controlled trial. Twenty-eight healthy symmetrical bilateral MITMS patients (mean age, 23 years) were randomly assigned to two groups. Buccal infiltration injections without palatal injections were designated as the study group and the buccal with palatal infiltration cases were the control group, using 4% articaine and 1:100,000 epinephrine. The operation started after 10 minutes of infiltration. Pain assessment was done using a visual analogue scale and a numeric rating scale after each injection and extraction procedure. Similarly, the success rate, hemodynamic parameters, and additional requested local anesthetic were assessed. RESULTS: The results showed that the pain associated with local anesthetic injections between both groups were significantly different. However, the success rates between the groups were not significantly different. Postoperative pain was not significant between both groups and a few patients requested an additional local anesthetic, but the results were not statistically significant. For hemodynamic parameters, there was a significant difference in systolic pressure during incision, bone removal, and tooth elevation. In comparison, during the incision stage there was a significant difference in diastolic pressure; however, other steps in the intervention were not significantly different between groups. CONCLUSION: We concluded that buccal infiltration injection without palatal injection can be an alternative technique instead of the conventional injection for MITMS.
ABSTRACT
BACKGROUND: Mandibular third molar removal is the most common surgical procedure encountered in oral and maxillofacial clinics. It also presents the greatest challenges and controversies for surgeons when surgical removal is considered. Furthermore, diverse anesthesia results and success rates are achieved after using the same concentrations of different solutions or the same amounts of local anesthetics. The purpose of this study was to examine the efficiency of using double-cartridge (3.4 ml) 4% lidocaine (high concentration) and 4% articaine with a 1:100000 epinephrine infiltration in the retromolar region for impacted lower third molar surgery. METHODS: This double-blind study included 30 patients with symmetrically impacted lower third molars. The patients were randomly selected to receive 4% articaine on one side and 4% lidocaine on the other, as a local anesthetic for third molar surgery. The onset, duration of soft-tissue numbness, pulpal sensitivity, amount of additional local anesthetic needed, pain score during the surgical procedure, and duration of the operation were recorded. RESULTS: The results of this research indicate that 86.7% of the operations in the 4% articaine group and 83.3% of those in the 4% lidocaine group were successful. Furthermore, the outcomes in both groups were not statistically significant (P > 0.05). Numbness onset occurred faster in the articaine group than it did in the lidocaine group. However, the duration of soft-tissue anesthesia and pain scores recorded immediately postoperatively were similar. CONCLUSION: It is concluded that 4% lidocaine and 4% articaine had a similar infiltration efficacy in the retromolar region and both local anesthetics are adequate for impacted lower third molar surgery. There were no statistically significant differences between the two local anesthetics regarding pain control and the duration of soft-tissue numbness during the procedure.
ABSTRACT
Impacted teeth are a frequent phenomenon encountered by every clinician. The artificial eruption of embedded teeth is the process of directing an impacted tooth into normal occlusion. This procedure is currently attracting attention, with the aim of finding the best technique to use according to each case. This article presents key information regarding impacted incisors, canines, and premolars. In addition, we describe the most common techniques to use for artificial eruption, the open and closed techniques. We review the literature concerning these techniques and outline how clinicians can manage every type of impacted tooth.