Side-chain tunability of furan-containing low-band-gap polymers provides control of structural order in efficient solar cells.

The solution-processability of conjugated polymers in organic solvents has classically been achieved by modulating the size and branching of alkyl substituents appended to the backbone. However, these substituents impact structural order and charge transport properties in thin-film devices. As a result, a trade-off must be found between material solubility and insulating alkyl content. It was recently shown that the substitution of furan for thiophene in the backbone of the polymer PDPP2FT significantly improves polymer solubility, allowing for the use of shorter branched side chains while maintaining high device efficiency. In this report, we use PDPP2FT to demonstrate that linear alkyl side chains can be used to promote thin-film nanostructural order. In particular, linear side chains are shown to shorten π-π stacking distances between backbones and increase the correlation lengths of both π-π stacking and lamellar spacing, leading to a substantial increase in the efficiency of bulk heterojunction solar cells.

Efficient small molecule bulk heterojunction solar cells with high fill factors via pyrene-directed molecular self-assembly.

Efficient organic photovoltaic (OPV) materials are constructed by attaching completely planar, symmetric end-groups to donor-acceptor electroactive small molecules. Appending C2-pyrene as the small molecule end-group to a diketopyrrolopyrrole core leads to materials with a tight, aligned crystal packing and favorable morphology dictated by π-π interactions, resulting in high power conversion efficiencies and high fill factors. The use of end-groups to direct molecular self-assembly is an effective strategy for designing high-performance small molecule OPV devices.

Steric control of the donor/acceptor interface: implications in organic photovoltaic charge generation.

The performance of organic photovoltaic (OPV) devices is currently limited by modest short-circuit current densities. Approaches toward improving this output parameter may provide new avenues to advance OPV technologies and the basic science of charge transfer in organic semiconductors. This work highlights how steric control of the charge separation interface can be effectively tuned in OPV devices. By introducing an octylphenyl substituent onto the investigated polymer backbones, the thermally relaxed charge-transfer state, and potentially excited charge-transfer states, can be raised in energy. This decreases the barrier to charge separation and results in increased photocurrent generation. This finding is of particular significance for nonfullerene OPVs, which have many potential advantages such as tunable energy levels and spectral breadth, but are prone to poor exciton separation efficiencies. Computational, spectroscopic, and synthetic methods were combined to develop a structure-property relationship that correlates polymer substituents with charge-transfer state energies and, ultimately, device efficiencies.

Incorporation of furan into low band-gap polymers for efficient solar cells.

The design, synthesis, and characterization of the first examples of furan-containing low band-gap polymers, PDPP2FT and PDPP3F, with substantial power conversion efficiencies in organic solar cells are reported. Inserting furan moieties in the backbone of the conjugated polymers enables the use of relatively small solubilizing side chains because of the significant contribution of the furan rings to overall polymer solubility in common organic solvents. Bulk heterojunction solar cells fabricated from furan-containing polymers and PC(71)BM as the acceptor showed power conversion efficiencies reaching 5.0%.

Synthesis, properties, and electronic applications of size-controlled poly(3-hexylthiophene) nanoparticles.

Semiconducting polymer nanoparticles have attracted increasing interest for the facile fabrication of organic electronic devices. These nanoparticles could provide the ability to control thin film morphology independently of optical and electronic properties. Using poly(3-hexylthiophene), we demonstrate surfactant-free synthesis and characterization of size-controlled, semicrystalline polymer nanoparticles. Our method produces discrete nanoparticles that can be deposited from solution into thin films. By controlling the molecular weight, polydispersity, and regioregularity of the polymer as well as varying its initial solution concentration, we tune both the size and crystallinity of the resulting nanoparticles. Organic field effect transistors (OFETs) using nanoparticles made from this method produce good semiconducting devices with hole mobilities on the order of 10(-3) cm(2)/(V s). This approach to forming polymer nanoparticles is attractive for the introduction of solution-processable, well-characterized nanoscale crystalline domains of a variety of conjugated polymers and should be useful for the fabrication and optimization of organic electronic devices.

Synthetic control of structural order in N-alkylthieno[3,4-c]pyrrole-4,6-dione-based polymers for efficient solar cells.

The correlation between the nature of alkyl substituents on N-alkylthieno[3,4-c]pyrrole-4,6-dione (TPD)-based polymers and solar cell device performance has been investigated. After adjusting device parameters, these TPD-based polymers used with PC(61)BM provided photovoltaic responses ranging from 4.0% to 6.8%, depending on the size and shape of the alkyl solubilizing groups. Further, we have correlated the effect of the alkyl groups on the structural order and orientation of the polymer backbone using grazing incidence X-ray scattering analysis, and we have demonstrated how fine-tuning of these parameters can improve the power conversion efficiency.

All-polymer photovoltaic devices of poly(3-(4-n-octyl)-phenylthiophene) from Grignard Metathesis (GRIM) polymerization.

The synthesis of poly[3-(4-n-octyl)-phenylthiophene] (POPT) from Grignard Metathesis (GRIM) is reported. GRIM POPT is found to have favorable electronic, optical, and processing properties for organic photovoltaics (OPVs). Space-charge limited current and field effect transistor measurements for POPT yielded hole mobilities of 1 x 10(-4) cm(2)/(V s) and 0.05 cm(2)/(V s), respectively. Spincasting GRIM POPT from chlorobenzene yields a thin film with a 1.8 eV band gap, and PC(61)BM:POPT bulk heterojection devices provide a peak performance of 3.1%. Additionally, an efficiency of 2.0% is achieved in an all-polymer, bilayer OPV using poly[2-methoxy-5-(2'-ethylhexyloxy)-1,4-(1-cyanovinylene)phenylene] (CNPPV) as an acceptor. This state-of-the-art all-polymer device is analyzed in comparison to the analogous poly(3-hexylthiophene) (P3HT)/CNPPV device. Counter to expectations based on more favorable energy level alignment, greater active layer light absorption, and similar hole mobility, P3HT/CNPPV devices perform less well than POPT/CNPPV devices with a peak efficiency of 0.93%.

The influence of poly(3-hexylthiophene) regioregularity on fullerene-composite solar cell performance.

A comparison of three samples of poly(3-hexylthiophene) having regioregularities of 86, 90, and 96% is used to elucidate the effect of regioregularity on polymer-fullerene-composite solar cell performance. It is observed that polymer samples with lower regioregularity are capable of generating fullerene composites that exhibit superior thermal stability. The enhanced thermal stability of the composites is attributed to a lower driving force for polymer crystallization in the less regioregular polymer samples, which is supported with two-dimensional grazing incidence X-ray scattering and differential scanning calorimetry measurements. Furthermore, it is demonstrated that all three polymer samples are capable of generating solar cells with equivalent peak efficiencies of approximately 4% in blends with [6,6]-phenyl-C61-butyric acid methyl ester. While it may be non-intuitive that polymers with lower regioregularity can exhibit higher efficiencies, it is observed that the charge-carrier mobility of the three polymers is on the same order of magnitude (10(-4) cm2 V(-1) s(-1)) when measured from the space-charge-limited current, suggesting that highly regioregular and crystalline polythiophenes are not required in order to effectively transport charges in polymer solar cells. Overall, these results suggest a design principle for semicrystalline conjugated polymers in fullerene-composite solar cells in which crystallization-driven phase separation can be dramatically suppressed via the introduction of a controlled amount of disorder into the polymer backbone.