Using C-DFT to develop an e-ReaxFF force field for acetophenone radical anion.

Increased electricity usage over the past several decades has accelerated the need for efficient high-voltage power transmission with reliable insulating materials. Cross-linked polyethylene (XLPE) prepared via dicumyl peroxide (DCP) cross-linking has emerged as the insulator of choice for modern power cables. Although DCP cross-linking generates the desired XLPE product in high yield, other by-products are also produced. One such by-product, acetophenone, is particularly intriguing due to its aromaticity and positive electron affinity. In this work, constrained density functional theory (C-DFT) was utilized to develop an e-ReaxFF force field suitable for describing the acetophenone radical anion. Initial parameters were taken from the 2021 Akbarian e-ReaxFF force field, which was developed to describe XLPE chemistry. Then, C-DFT geometry optimizations were performed wherein an excess electron was constrained to each atom of acetophenone. The resulting C-DFT energy values for the various electronic positions were added to the e-ReaxFF training set. Next, an analogous set of structures was energy-minimized using e-ReaxFF, and equilibrium mixture compositions for the two methods were compared at multiple temperatures. Iterative fitting against C-DFT energy data was performed until satisfactory agreement was achieved. To test force field performance, molecular dynamics simulations were performed in e-ReaxFF and the resulting electronic distributions were qualitatively compared to unconstrained-DFT spin density data. By expanding our e-ReaxFF force field for XLPE, namely, adding the capability to describe acetophenone and its interactions with an excess electron, we move one step closer to a comprehensive molecular understanding of XLPE chemistry in a high-voltage power cable.

Atomistic-scale insight into the polyethylene electrical breakdown: An eReaxFF molecular dynamics study.

Cross-linked polyethylene (XLPE) has been recognized as an outstanding insulator for high-voltage power cables due to its favorable structural integrity at high temperature, low moisture sensitivity, chemical resistance, and low rates of failure due to aging. However, the roles of by-products and amorphous regions generated during the XLPE production are not clearly known at the atomistic scale. In this study, we present an eReaxFF-based molecular dynamics simulation framework with an explicit electron description verified against density functional theory data to investigate the roles of XLPE by-products and processing variables such as density and voids on the time to dielectric breakdown (TDDB) of polyethylene (PE). Our simulation results indicate that an increase in density of PE increases the TDDB; however, adding a by-product with positive electron affinity such as acetophenone can reduce the TDDB. Furthermore, during the electrical breakdown in PE, electrons tend to migrate through voids when transferring from the anode to cathode. In comparison with neutral acetophenone, we find that the acetophenone radical anion can significantly reduce the energy barrier and the reaction energy of secondary chemical reactions.

Degradation of Hole Transport Materials via Exciton-Driven Cyclization.

Organic light-emitting diode (OLED) displays have been an active and intense area of research for well over a decade and have now reached commercial success for displays from cell phones to large format televisions. A more thorough understanding of the many different potential degradation modes which cause OLED device failure will be necessary to develop the next generation of OLED materials, improve device lifetime, and to ultimately improve the cost vs performance ratio. Each of the different organic layers in an OLED device can be susceptible to unique decomposition pathways, however stability toward excitons is critical for emissive layer (EML) materials as well as any layer near the recombination zone. This study will specifically focus on degradation modes within the hole transport layer (HTL) with the goal being to identify the general decomposition paths occurring in an operating device and use this information to design new derivatives which can block these pathways. Through post-mortem analyses of several aged OLED devices, an apparently common intramolecular cyclization pathway has been identified that was not previously reported for arylamine-containing HTL materials and that operates parallel to but faster than the previously described fragmentation pathways.

Dielectric spectroscopy for the determination of the glass transition temperature of pharmaceutical solid dispersions.

The purpose of this study was to evaluate analytical techniques for the measurement of the glass transition temperature of HPMC and formulated solid dispersions thereof. Unmodified samples of various grades of HPMC and solid dispersions of HPMC and itraconazole produced by hot melt extrusion were analyzed by thermomechanical analysis, differential scanning calorimetry, thermally stimulated depolarization current and dielectric spectroscopy. It was found that dielectric spectroscopy offers the best accuracy and reproducibility for analysis of the base HPMC powders regardless of the substitution type or viscosity grade and that the obtained results were not frequency dependent. The results of dielectric measurements of solid dispersions prepared by hot melt extrusion were compared with predicted values of the Gordon-Taylor equation. It was found that time-temperature superposition effects and small molecule frequency dependence makes broadly applying determination of the glass transition temperature in drug dispersions by dielectric spectroscopy prohibitively difficult.

On a different approach toward low-frequency dielectric spectroscopy measurements of conductive liquids.

Driven by recent interest in the low-frequency Debye-like relaxations in hydrogen bonding liquids, here we present an alternative method for measuring such relaxations without the detrimental effects of ionic conductivity or electrode polarization. Glycerol was chosen as a molecule of interest, and a fit for the α-transition using the Vogel-Fulcher-Tammann equation was found to be τ = 2.31 × 10(-14) exp(2110 K∕[T-135 K]). This method is easily adaptable by most laboratories with existing dielectric spectrometers, and could prove useful in the accurate measurement of relaxations in conductive media at low frequencies. A brief summary of comparable techniques is also presented.