Quantitative light-induced fluorescence enables effective detection of orthodontic adhesive residues in diverse environments.

BACKGROUND: Adhesive remnants post-orthodontic treatment might have deleterious effects on oral health, including enamel demineralization, plaque accumulation, and elevated risk of caries development. The aim of this study was to identify and characterize adhesive residues in an ex vivo environment rich in salivary microbiota using quantitative light-induced fluorescence (QLF) technology. METHODS: Disc-shaped adhesive samples with thickness ranging from 800 to 100 µm were prepared using GC Ortho, GOTO, T Orthobond, and Transbond XT and subsequently evaluated utilizing a QLF system. Bovine teeth containing GC Ortho and GOTO adhesives and isolated human premolar teeth bonded with brackets were subjected to a 10-day incubation in an artificial saliva environment. Daily imaging was conducted using QLF during incubation. Data with ΔR > 30% and simple hygiene score (SHS) were obtained with a software for further analysis. RESULTS: Fluorescence intensity exhibited significant differences among the four orthodontic adhesives (p < 0.05). Results of incubation in artificial saliva revealed that red fluorescence surrounding the adhesive on the tooth surface was distinctly observable from day five onwards, with ΔR > 30% and SHS levels higher than those of the control group without adhesive (p < 0.05). Observation of fluorescence images of isolated human premolar teeth with bonded brackets indicated that red fluorescence was primarily present around the brackets. CONCLUSIONS: Application of QLF is efficacious in identifying and demarcating adhesive residues within an environment rich in salivary microbiota.

Improvement implant osseointegration through nonthermal Ar/O2 plasma.

This study investigated the effects of nonthermal Ar/O2 plasma on the osseointegration of titanium implants. Through 8 weeks' in vivo evaluation of implants inserted into femoral bones of male Sprague-Dawley rats, the new bone mineralization apposition rate (MAR) is increased by 1.87 and 2.14 times for implants of smooth machined (SM) and sand-blasted and acid-etched (SLA) after plasma treatment. The bone volume fraction (bone volume/total volume, BV/TV) and bone-implant contact (BIC) ratios are improved by 1.31, 1.26 times and 1.35, 1.15 times after 90 s plasma treatment. The improved hydrophilicity rather than implant surface morphology is believed to play a critical role for the osseointegration improvement.

Effect of bacterial resistant zwitterionic derivative incorporation on the physical properties of resin-modified glass ionomer luting cement.

Biofilms induce microbial-mediated surface roughening and deterioration of cement. In this study, zwitterionic derivatives (ZD) of sulfobetaine methacrylate (SBMA) and 2-methacryloyloxyethyl phosphorylcholine, were added in concentrations of 0, 1, and 3% to three different types of commercially available resin-modified glass ionomer cement (RMGIC) (RMC-I: RelyX Luting 2, RMC-II: Nexus RMGI, and RMC-III: GC FujiCEM 2). The unmodified RMGICs served as the control group for comparison. The resistance of Streptococcus mutans to ZD-modified RMGIC was evaluated with a monoculture biofilm assay. The following physical properties of the ZD-modified RMGIC were assessed: wettability, film thickness, flexural strength, elastic modulus, shear bond strength, and failure mode. The ZD-modified RMGIC significantly inhibited biofilm formation, with at least a 30% reduction compared to the control group. The addition of ZD improved the wettability of RMGIC; however, only 3% of the SBMA group was statistically different (P < 0.05). The film thickness increased in proportion to the increasing ZD concentrations; there was no statistical difference within the RMC-I (P > 0.05). The experimental groups' flexural strength, elastic modulus, and shear bond strength showed an insignificant decrease from the control group; there was no statistical difference within the RMC-I (P > 0.05). The mode of failure differed slightly in each group, but all groups showed dominance in the adhesive and mixed failure. Thus, the addition of 1 wt.% ZD in RMGIC favorably enhanced the resistance to Streptococcus mutans without any tangible loss in flexural and shear bond strength.

Changes in mechanical and bacterial properties of denture base resin following nanoceria incorporation with and without SBA-15 carriers.

Poly (methyl methacrylate) (PMMA) is a commonly used material for the fabrication of biomedical appliances. Although PMMA has several advantages, it is susceptible to microbial insults with practical use. Therefore, different bioactive nanomaterials, such as nanoceria (CeN), have been proposed to enhance the properties of PMMA. In this study, we investigated the effect of the incorporation of CeN into PMMA with and without the use of mesoporous silica nanoparticle (SBA-15) carriers. The unmodified PMMA specimens (control, CTRL) were compared to groups containing SBA-15, CeN, and the synthesized SBA-15 impregnated with CeN (SBA-15@CeN) at different loading percentages. The mechanical and physical properties of the different SBA-15@CeN groups and their effects on cell viability were investigated, and the optimal CeN concentration was identified accordingly. Our results revealed that flexural strength was significantly (P < 0.01) reduced in the SBA-15@CeN3× group (containing 3-fold the CeN wt. %). Although the surface microhardness increased with the increase in the wt. % of SBA-15@CeN, cell viability was significantly reduced (P < 0.001). The SBA-15@CeN1× group had the optimal concentration and displayed significant resistance to single-and multispecies microbial colonization. Finally, the enzymatic activity of CeN was significantly high in the SBA-15@CeN1× group. The proinflammatory markers (IL-6, IL-1ß, TNF-α, CD80, and CD86) showed a significant (P < 0.001) multifold reduction in lipopolysaccharide-induced RAW cells treated with a 5-day eluate of the SBA-15@CeN1× group. These results indicate that the addition of SBA-15@CeN at 1.5 wt % improves the biological response of PMMA without compromising its mechanical properties.

Bioactive effects of nonthermal argon-oxygen plasma on inorganic bovine bone surface.

As a commonly used bone substitute material in the clinic, inorganic bovine bone has the characteristics of osteoconduction but not osteoinduction. This study aimed to treat inorganic bovine bone using nonthermal argon-oxygen plasma (NTAOP) to obtain greater bioreactivity for enhancing adhesion, proliferation and differentiation of mouse preosteoblast MC3T3-E1 cells. In this study, inorganic bovine bone was activated by NTAOP, and the surface characteristics were analyzed. MC3T3-E1 cells were then seeded onto the surface of inorganic bovine bone. Cell morphology, proliferation and osteogenic differentiation were examined. There was no obvious change in the surface morphology of specimens between the two groups. Regarding the elemental composition of the material, the amount of surface carbon was reduced, whereas oxygen, phosphorus and calcium levels were increased in the NTAOP group. Further studies showed that the NTAOP groups performed better than their untreated counterparts in terms of supporting cell proliferation and differentiation. Inorganic bovine bone treated with NTAOP can promote preosteoblast adhesion, proliferation and differentiation.