Hydrophobically Associating Polymers Dissolved in Seawater for Enhanced Oil Recovery of Bohai Offshore Oilfields.

As compared to China's overall oil reserves, the reserve share of offshore oilfields is rather significant. However, offshore oilfield circumstances for enhanced oil recovery (EOR) include not just severe temperatures and salinity, but also restricted space on offshore platforms. This harsh oil production environment requires polymers with relatively strong salt resistance, solubility, thickening ability, rapid, superior injection capabilities, and anti-shearing ability. As a result, research into polymers with high viscosity and quick solubility is recognized as critical to meeting the criteria of polymer flooding in offshore oil reservoirs. For the above purposes, a novel hydrophobically associating polymer (HAP) was prepared to be used for polymer flooding of Bohai offshore oilfields. The synthetic procedure was free radical polymerization in aqueous solutions starting at 0 °C, using acrylamide (AM), acrylic acid (AA), 2-acrylamido-2-methylpropane sulfonic acid (AMPS), and poly(ethylene glycol) octadecyl methacrylate (POM) as comonomers. It was discovered that under ideal conditions, the molecular weight of HAP exceeds 2.1 × 107 g⋅mol-1. In a simulated reservoir environment, HAP has substantially greater solubility, thickening property, and salt resistance than conventional polyacrylamide (HPAM), with equivalent molecular weight. Finally, the injectivity and propagation of the two polymers in porous media were investigated. Compared with HPAM, which has a similar molecular weight, HAP solution with the concentration of 0.175% had a much better oil displacement effect in the porous medium, which can enhance oil recovery by 8.8%. These discoveries have the potential to pave the way for chemical EOR in offshore oilfields.

Tunable Viscoelastic Properties of Sodium Polyacrylate Solution via CO2-Responsive Switchable Water.

Upon stimulus by CO2, CO2-switchable viscoelastic fluids experience a deliberate transition between non-viscous and highly viscous solution states. Despite attracting considerable recent attention, most such fluids have not been applied at a large- scale due to their high costs and/or complex synthesis processes. Here, we report the development of CO2-switchable viscoelastic fluids using commercially available sodium polyacrylate (NaPAA) and N,N-dimethyl ethanol amine (DMEA)-based switchable water. Upon bubbling CO2, into the solutions under study, DMEA molecules are protonated to generate quaternary ammonium salts, resulting in pronounced decreases in solutions viscosity and elasticity due to the influence of increased ionic strength on NaPAA molecular conformations. Upon removal of CO2 via introduction of N2, quaternary salts are deprotonated to tertiary amines, allowing recovery of fluid viscosity and elasticity to near the initial state. This work provides a simple approach to fabricating CO2-switchable viscoelastic fluids, widening the potential use of CO2 in stimuli-responsive applications.

Hydrophilic modification of methylcellulose to obtain thermoviscosifying polymers without macro-phase separation.

Methylcellulose (MC) has received considerable attention because of its thermogelation behavior in aqueous solutions upon heating; however, the accompanied macro-phase separation results in demixing and detriment of thickening power. To alleviate this drawback, a novel family of hydrophilically modified methylcelluloses (HMMCs) was prepared by introducing acylamino, carboxyl, and amino groups onto MC side chains. Above association temperature (Tass), MC solutions experienced obvious macro-phase separation and thermothinning phenomenon; on the contrary, HMMCs solutions exhibited thermo- and salt-thickening behaviors, and Tass could be adjusted from 44 °C to 87 °C by altering the nature of HMMCs or salt content in solutions. The mechanism to eliminate the macro-phase separation of HMMC stems from the balance between hydrophilicity and hydrophobicity. This work opens a new avenue for cellulose derivatives to sustain their thermoviscosifying ability and widen their applications in hostile environments.

Tuning CO2-induced reversible redispersion or irreversible destabilisation for latex separation.

HYPOTHESIS: The CO2-sensitive dispersion/precipitation transition of polymer latexes fabricated based on a responsive emulsifier is a promising way to conveniently acquire bulk polymer materials. Nevertheless, the tedious synthesis procedures for switchable surfactants and the harsh operating requirements for the sensitive latexes constrain the applicability of the approach for latex preparation. Therefore, a new strategy for generating latexes with tunable CO2 responsiveness in a maneuverable way is urgently needed. EXPERIMENTS: In this work, a CO2-switchable electrostatic interaction is introduced to construct responsive latexes. A series of lightly crosslinked poly(diethylaminoethyl methacrylate-styrene) [P(DEA-St)] latexes with different PDEA contents were fabricated via one-pot emulsion copolymerization, with divinylbenzene and sodium dodecylsulfate (SDS) used as the crosslinker and anionic emulsifier, respectively. The influence of the DEA feeding ratio on the resulting P(DEA-St) colloids was characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. Then, a cyclic CO2/N2 input was introduced to verify the response transitions of polymer latexes. FINDINGS: Accompanied by the stepwise decrease of DEA feeding ratio, the morphology of the resulting copolymerized nanoparticles changed from an ambiguous bulge to the typical spherical pattern. In addition, the P(DEA-St) latexes treated by cyclic CO2/N2 exhibit four different types of response modes, namely (i) CO2-switchable swelling/deswelling transition, (ii) CO2-reversible dispersion/coagulation transition, (iii) CO2-induced irreversible destabilisation and (iv) CO2-insensitive latexes. The CO2-responsive destabilisation is highly applicable in the separation and transportation fields of commercial latex products, such as poly(methyl methacrylate), poly(n-butyl acrylate) and poly(butyl methacrylate) colloids.