[Diagnostic efficacy of prostate cancer using targeted biopsy with 6-core systematic biopsy for patients with PI-RADS 5].

OBJECTIVE: To investigate the diagnostic efficacy of targeted biopsy (TBx), systematic biopsy (SBx), TBx+6-core SBx in prostate cancer (PCa) / clinically significant prostate cancer (cs-PCa) for patients with prostate imaging reporting and data system (PI-RADS) score of 5, and thereby to explore an optimal sampling scheme. METHODS: The data of 585 patients who underwent multiparametric magnetic resonance imaging (mpMRI) with at least one lesion of PI-RADS score 5 at Peking University First Hospital from January 2019 to June 2022 were retrospectively analyzed. All patients underwent mpMRI / transrectal ultrasound (TRUS) cognitive guided biopsy (TBx+SBx). With the pathological results of combined biopsy as the gold standard, we compared the diagnostic efficacy of TBx only, SBx only, and TBx+6-core SBx for PCa/csPCa. The patients were grouped according to mpMRI T-stage (cT2, cT3, cT4) and the detection rates of different biopsy schemes for PCa/csPCa were compared using Cochran's Q and McNemar tests. RESULTS: Among 585 patients with a PI-RADS score of 5, 560 (95.7%) were positive and 25(4.3%) were negative via TBx+SBx. After stratified according to mpMRI T-stage, 233 patients (39.8%) were found in cT2 stage, 214 patients (36.6%) in cT3 stage, and 138 patients (23.6%) in cT4 stage. There was no statistically significant difference in the detection rate of PCa/csPCa between TBx+6-core SBx and TBx+SBx (all P>0.999). Also, there was no statistically significant difference in the detection rate of PCa/csPCa between TBx and TBx+SBx in the cT2, cT3, and cT4 subgroups (PCa: P=0.203, P=0.250, P>0.999; csPCa: P=0.700, P=0.250, P>0.999). The missed diagnosis rate of SBx for PCa and csPCa was 2.1% (12/560) and 1.8% (10/549), and that of TBx for PCa and csPCa was 1.8% (10/560) and 1.4% (8/549), respectively. However, the detection rate of TBx+6-core SBx for PCa and csPCa was 100%. Compared with TBx+SBx, TBx and TBx+6-core SBx had a fewer number of cores and a higher detection rate per core (P < 0.001). CONCLUSION: For patients with a PI-RADS score of 5, TBx and TBx+6-core SBx showed the same PCa/csPCa detection rates and a high detection rates per core as that of TBx+SBx, which can be considered as an optimal scheme for prostate biopsy.

Zinc(II)-Based Ring-and-Rod Coordination Layer as an Excitation-Wavelength-dependent Dual-Emissive Chemosensor for Discriminating Fe3+, Cr3+, and Al3+ in Water.

The reactions of Zn(NO3)2, 3,6-bis(pyridin-3-yl)-9H-carbazole (bpycz), and 2,5-dihydroxyterephthalic acid (H4dhbdc) or 2-bromoterephthalic acid (Br-1,4-H2bdc) under hydro(solvo)thermal conditions yielded corresponding coordination polymers (CPs) {[Zn(H2dhbdc)(bpycz)]•0.5H2O}n (1) and [Zn(Br-1,4-bdc)(bpycz)]•2DMAc•H2O (2), respectively, with high thermal stability approaching 350 °C. CP 1 adopts a ring-and-rod layer structure, which is topologically described as a 4-connected net with the point symbol of 2•65. Two layers are interpenetrated in parallel interlocking mode to form a double 2D → 2D polyrotaxane entanglement with extra-framework void space of 19.6%. CP 2 has a non-interpenetrating ring-and-rod layer structure of 4-connected 2•65 net topology, with extra-framework void space of 16.6%. Thermally activated 1 and 2 revealed CO2 uptakes of 101.1 and 98.6 cm3 g-1, respectively, at P/P0 = 1 and 195 K. X-ray powder diffraction (XRPD) patterns confirmed that 1 and 2 both possessed high chemical stability in H2O, CH3OH, acetone, and DMF, and framework stability during gas adsorption-desorption. The H2O suspension of 1 displayed excitation-dependent dual-emissive properties, appearing at 432 nm upon excitation at 300 nm and at 528 nm upon excitation at 365 nm. Of note, 1 was capable of detection of Fe3+, Cr3+, and Al3+ ions in H2O, showing good anti-interference ability, excellent selectivity, and high sensitivity. More interesting, the dual-emissive properties make 1 to be an excellent luminescence chemosensor to screen Fe3+, Cr3+, and Al3+ from a pool of metal ions in H2O upon excitation at 300 nm via luminescence quenching effect and then discriminate Fe3+, Cr3+, and Al3+ upon excitation at 365 nm via luminescence quenching, unaltered, and enhancement responses, respectively. On the other hand, the H2O suspension of 2 demonstrated an excitation-independent emission appearing at around 430 nm, which could be utilized to sensitively detect Fe3+ and Cr3+ ions with good anti-interference ability and excellent selectivity via luminescence quenching effect. Further, 1 and 2 were recyclability and possessed cycling stability. The plausible sensing mechanisms for 1 and 2 toward Fe3+, Cr3+, and Al3+ were also explored in detail.

A neutral rhenium-biimidazole complex for the selective recognition of fluoride ions.

The neutral rhenium(I)-biimidazole complex [Re(CO)3(biimH)(1,4-NVP)] (1) was designed and synthesized by a one-pot reaction of Re2(CO)10, 2,2'-biimidazole (biimH2) and 4-(1-naphthylvinyl)pyridine (1,4-NVP). The structure of 1 was characterized by various spectroscopic techniques including IR, 1H NMR, FAB-MS, and elemental analysis and further confirmed by a single-crystal X-ray diffraction analysis. The mononuclear complex 1, a relatively simple structure with an octahedral geometry, is comprised of facial-arranged carbonyl groups, one chelated biimH monoanion, and one 1,4-NVP. Complex 1 shows the lowest energy absorption band at around 357 nm and an emission band at 408 nm in THF. The luminescent characteristics of 1 combined with the hydrogen bonding ability of the partially coordinated monoionic biimidazole ligand permits the complex to selectively recognize fluoride ions (F-) in the presence of other halides through a dramatic luminescence enhancement. The recognition mechanism of 1 can be convincingly explained in terms of H-bond formation and proton abstraction upon the addition of F- ions by 1H and 19F NMR titration experiments. The electronic properties of 1 were further supported by time dependent density functional theory (TDDFT) computational studies.

Excitation-Wavelength-Dependent Luminescence of Chemically and Physically Mixed Europium and Terbium Phosphonates: Color-Tunable Luminescence, Near-White-Light Emission, and Selective Fe3+ Detection.

Molecular lanthanide phosphonates [Ln2 (H3 tpmm)2 (H2 O)6 ] ⋅ xH2 O (Ln=Eu, EuP; Ln=Tb, TbP) were synthesized. Single-crystal X-ray diffraction confirmed that EuP has a sandwich-like dinuclear structure, in which the Eu(III) center adopts a {EuO8 } distorted dodecahedral geometry. XRPD patterns prove that TbP and EuP are isomorphous and isostructural. EuP and TbP are highly thermally stable approaching 450 °C and exhibit red- and green-light emissions from the characteristic 4 f-4 f transition of the Eu3+ and Tb3+ , respectively. Interestingly, luminescence modulation is achieved for the chemically mixed Eu/Tb phosphonate analogues, c-Eux Tb2 -x P (x=1.5, 1, 0.5), and physically mixed Eu/Tb phosphonate materials, p-yEuP : zTbP (y : z=3 : 1, 1 : 1, 1 : 3), with varying the excitation wavelength. Of particular note, near-white-light emission is also achieved for c-EuTbP, p-EuP : TbP, and p-EuP : 3TbP when excited at 365 nm. Therefore, these dinuclear molecular lanthanide phosphonates emitting excitation wavelength and Eu3+ : Tb3+ ratio dependent luminescence might be potential candidates for color-tunable luminescence materials and white-light-emitting materials. On the other hand, the bright green-light emission makes TbP to be an excellent reusable luminescence sensor for selective detection of Fe3+ with Stern-Volmer quenching constant (KSV ) of 9.66×103  M-1 and detection limit (DL) of 0.42 µM through absorption competition caused luminescence quenching effect.

Aggregation-induced emission enhancement (AIEE) of tetrarhenium(I) metallacycles and their application as luminescent sensors for nitroaromatics and antibiotics.

The self-assembly of tetrarhenium metallacycles [{Re(CO)3}2(µ-dhaq)(µ-N-N)]2 (3a, N-N = 1,3-bis(1-butylbenzimidazol-2-yl)benzene; 3b, N-N = 1,3-bis(1-octylbenzimidazol-2-yl)benzene), (H2-dhaq = 1,4-dihydroxy-9,10-anthraquinone) and [{Re(CO)3}2(µ-thaq)(µ-N-N)]2 (4, N-N = 1,3-bis(1-butylbenzimidazol-2-yl)benzene), (H2-thaq = 1,2,4-trihydroxy-9,10-anthraquinone) under solvothermal conditions is described. The metallacycles 3a,b and 4 underwent aggregation-induced emission enhancement (AIEE) in THF upon the incremental addition of water. TEM images revealed that metallacycle 3a in a 60% aqueous THF solution formed rectangular aggregates with a wide size distribution, while a 90% aqueous THF solution resulted in the formation of a mixture of nanorods and amorphous aggregates due to rapid and abrupt aggregation. UV-vis and emission spectral profiles supported the formation of nanoaggregates of metallacycles 3a,b and 4 upon the gradual addition of water to a THF solution containing metallacycles. Further studies indicated that these nanoaggregates were excellent probes for the sensitive and selective detection of nitro group containing picric acid (PA) derivatives as well as antibiotics.

Hetero-interpenetrating porous coordination polymers.

Interpenetrating porous coordination polymers (IPCPs) consist of two or more networks that are mechanically interlocked to form a coherent structure. The framework topology and the chemical composition are the two important criteria of interpenetrating networks to distinguish homo-IPCPs from hetero-IPCPs. Compared to rich homo-IPCPs, hetero-IPCPs remain rare and are formed rather unexpectedly. This Frontier article highlights hetero-IPCPs in accordance with the difference and/or identity of individual networks in terms of the framework topology and the chemical composition.

A Water-Stable 2-Fold Interpenetrating cds Net as a Bifunctional Fluorescence-Responsive Sensor for Selective Detection of Cr(III) and Cr(VI) Ions.

Reactions of ZnSO4∙7H2O, N-(pyridin-3-ylmethyl)-4-(pyridin-4-yl)-1,8-naphthalimide (NI-mbpy-34), and 5-bromobenzene-1,3-dicarboxylic acid (Br-1,3-H2bdc) afforded a luminescent coordination polymer, [Zn(Br-1,3-bdc)(NI-mbpy-34)]n (1), under hydro(solvo)thermal conditions. Single-crystal X-ray structure analysis revealed that 1 features a three-dimensional (3-D) 2-fold interpenetrating cds (or CdSO4) net topology with the point symbol of (65·8), where the Zn(II) centers are considered as 4-connected square-planar nodes. X-ray powder diffraction (XRPD) patterns and thermogravimetric (TG) analysis confirmed that 1 shows high chemical and thermal stabilities. Notably, 1 displayed solvent dependent photoluminescence properties; the fluorescence intensity and emission maximum of 1 in different solvent suspensions varied when a solvent was changed. Furthermore, the H2O suspension of 1 exhibited blue fluorescence emission and thus can be treated as a selective and sensitive fluorescent probe for turn-on detection of Cr3+ cations through absorbance caused enhancement (ACE) mechanism and turn-off detection of Cr2O72-/CrO42- anions through collaboration of the absorption competition and energy transfer process, with limit of detection (LOD) as low as µM scale.

Fluorescence-Responsive Detection of Ag(I), Al(III), and Cr(III) Ions Using Cd(II) Based Pillared-Layer Frameworks.

Two Cd(II) based coordination polymers, {Cd3(btc)2(BTD-bpy)2]∙1.5MeOH∙4H2O}n (1) and [Cd2(1,4-ndc)2(BTD-bpy)2]n (2), where BTD-bpy = bis(pyridin-4-yl)benzothiadiazole, btc = benzene-1,3,5-tricarboxylate, and 1,4-ndc = naphthalene-1,4-dicarboxylate, were hydro(solvo)thermally synthesized. Compound 1 has a three-dimensional non-interpenetrating pillared-bilayer open framework with sufficient free voids of 25.1%, which is simplified to show a topological (4,6,8)-connected net with the point symbol of (324256)(344454628)(3442619728). Compound 2 has a three-dimensional two-fold interpenetrating bipillared-layer condense framework regarded as a 6-connected primitive cubic (pcu) net topology. Compounds 1 and 2 both exhibited good water stability and high thermal stability approaching 350 °C. Upon excitation, compounds 1 and 2 both emitted blue light fluorescence at 471 and 479 nm, respectively, in solid state and at 457 and 446 nm, respectively, in the suspension phase of H2O. Moreover, compounds 1 and 2 in the suspension phase of H2O both exhibited a fluorescence quenching effect in sensing Ag+, attributed to framework collapse, and a fluorescence enhancement response in sensing Al3+ and Cr3+, ascribed to weak ion-framework interactions, with high selectivity and sensitivity and low detection limit.

A Cd(II) Luminescent Coordination Grid as a Multiresponsive Fluorescence Sensor for Cr(VI) Oxyanions and Cr(III), Fe(III), and Al(III) in Aqueous Medium.

Hydro(solvo)thermal reactions of Cd(NO3)2, N-(pyridin-3-ylmethyl)-4-(pyridin-4-yl)-1,8-naphthalimide (NI-mbpy-34), and 5-bromobenzene-1,3-dicarboxylic acid (Br-1,3-H2bdc) afforded a luminescent coordination polymer, {[Cd(Br-1,3-bdc)(NI-mbpy-34)(H2O)]∙2H2O}n (1). Single-crystal X-ray diffraction analysis showed that 1 features a two-dimensional (2-D) gridlike sql layer with the point symbol of (44·62), where the Cd(II) center adopts a {CdO5N2} pentagonal bipyramidal geometry. Thermogravimetric (TG) analysis confirmed the thermal stability of 1 up to about 340 °C, whereas XRPD patterns proved the maintenance of crystallinity and framework integrity of 1 in CH2Cl2, H2O, CH3OH, and toluene. Photoluminescence studies indicated that 1 displayed intense blue fluorescence emissions in both solid-state and H2O suspension-phase. Owing to the good fluorescent properties, 1 could serve as an excellent turn-off fluorescence sensor for selective and sensitive Cr(VI) detection in water, with LOD = 15.15 µM for CrO42- and 14.91 µM for Cr2O72-, through energy competition absorption mechanism. In addition, 1 could also sensitively detect Cr3+, Fe3+, and Al3+ ions in aqueous medium via fluorescence-enhancement responses, with LOD = 2.81 µM for Cr3+, 3.82 µM for Fe3+, and 3.37 µM for Al3+, mainly through an absorbance-caused enhancement (ACE) mechanism.

Engineered Bifunctional Luminescent Pillared-Layer Frameworks for Adsorption of CO2 and Sensitive Detection of Nitrobenzene in Aqueous Media.

Through a dual-ligand synthetic approach, five isoreticular primitive cubic (pcu)-type pillared-layer metal-organic frameworks (MOFs), [Zn2 (dicarboxylate)2 (NI-bpy-44)]⋅x DMF⋅y H2 O, in which dicarboxylate=1,4-bdc (1), Br-1,4-bdc (2), NH2 -1,4-bdc (3), 2,6-ndc (4), and bpdc (5), have been engineered. MOFs 1-5 feature twofold degrees of interpenetration and have open pores of 27.0, 33.6, 36.8, 52.5, and 62.1 %, respectively. Nitrogen adsorption isotherms of activated MOFs 1'-5' at 77 K all displayed type I adsorption behavior, suggesting their microporous nature. Although 1' and 3'-5' exhibited type I adsorption isotherms of CO2 at 195 K, MOF 2' showed a two-step gate-opening sorption isotherm of CO2 . Furthermore, MOF 3' also had a significant influence of amine functions on CO2 uptake at high temperature due to the CO2 -framework interactions. MOFs 1-5 revealed solvent-dependent fluorescence properties; their strong blue-light emissions in aqueous suspensions were efficiently quenched by trace amounts of nitrobenzene (NB), with limits of detection of 4.54, 5.73, 1.88, 2.30, and 2.26 µm, respectively, and Stern-Volmer quenching constants (Ksv ) of 2.93×103 , 1.79×103 , 3.78×103 , 4.04×103 , and 3.21×103 m-1 , respectively. Of particular note, the NB-included framework, NB@3, provided direct evidence of the binding sites, which showed strong host-guest π-π and hydrogen-bonding interactions beneficial for donor-acceptor electron transfer and resulting in fluorescence quenching.

From lamellar net to bilayered-lamella and to porous pillared-bilayer: reversible crystal-to-crystal transformation, CO2 adsorption, and fluorescence detection of Fe3+, Al3+, Cr3+, MnO4-, and Cr2O72- in water.

An aqua-coordinated lamellar net [Zn(5-NH2-1,3-bdc)(H2O)] (1, 5-NH2-1,3-H2bdc = 5-amino-1,3-benzenedicarboxylic acid) has been found to undergo a reversible stimuli-responsive 2D-to-2D crystal-to-crystal transformation with a water-free bilayered-lamellar net [Zn(5-NH2-1,3-bdc)] (1') upon removal and rebinding of aqua ligands, whereas a 2D porous pillared-bilayer [Zn2(5-NH2-1,3-bdc)2(NI-bpy-44)]·DMF (2, NI-bpy-44 = N-(pyridin-4-yl)-4-(pyridin-4-yl)-1,8-naphthalimide) has been tailored by introducing NI-bpy-44 to replace the coordinated aqua ligands. Pillared-bilayer 2 displayed a moderate CO2 uptake of 79.1 cm3 g-1 STP at P/P0 = 1 and 195 K with an isosteric heat of CO2 adsorption (Qst) of 37.0 kJ mol-1 at zero-loading. It is noteworthy that the water suspensions of 1 and 2 both displayed good fluorescence performances, which were effectively quenched by Fe3+, MnO4-, and Cr2O72- ions and shifted to long wavelengths by Fe3+, Al3+, and Cr3+, even with the coexistence of equal amounts of most other interfering ions. Taking the Stern-Volmer quenching constant, limit of detection, quenching efficiency, anti-interference ability, and visual observation into consideration, it is clear that both 1 and 2 are promising and excellent fluorescent sensors for highly sensitive detection of Fe3+, MnO4-, and Cr2O72-.

Anion-Dominated Copper Salicyaldimine Complexes-Structures, Coordination Mode of Nitrate and Decolorization Properties toward Acid Orange 7 Dye.

A salicyaldimine ligand, 3-tert-butyl-4-hydroxy-5-(((pyridin-2-ylmethyl)imino)methyl)benzoic acid (H2Lsalpyca) and two Cu(II)-salicylaldimine complexes, [Cu(HLsalpyca)Cl] (1) and [Cu(HLsalpyca)(NO3)]n (2), have been synthesized. Complex 1 has a discrete mononuclear structure, in which the Cu(II) center is in a distorted square-planar geometry made up of one HLsalpyca- monoanion in an NNO tris-chelating mode and one Cl- anion. Complex 2 adopts a neutral one-dimensional zigzag chain structure propagating along the crystallographic [010] direction, where the Cu(II) center suits a distorted square pyramidal geometry with a τ value of 0.134, consisted of one HLsalpyca- monoanion as an NNO tris-chelator and two NO3- anions. When the Cu∙∙∙O semi coordination is taken into consideration, the nitrato ligand bridges two Cu(II) centers in an unsymmetrical bridging-tridentate with a µ, κ4O,O':O',O″ coordination. Clearly, anion herein plays a critical role in dominating the formation of discrete and polymeric structures of copper salicyaldimine complexes. Noteworthy, complex 2 is insoluble but highly stable in H2O and various organic solvents (CH3OH, CH3CN, acetone, CH2Cl2 and THF). Moreover, complex 2 shows good photocatalytic degradation activity and recyclability to accelerate the decolorization rate and enhance the decolorization performance of acid orange 7 (AO7) dye by hydrogen peroxide (H2O2) under daylight.

Solvent-Induced Controllable Supramolecular Isomerism: Phase Transformation, CO2 Adsorption, and Fluorescence Sensing toward CrO42-, Cr2O72-, MnO4-, and Fe3.

Complexes {[Zn(bpdc)(Cz-3,6-bpy)]·DMF·H2O}n (1α-DMF, H2bpdc = biphenyl-4,4'-dicarboxylic acid, Cz-3,6-bpy = 3,6-bis(pyridine-4-yl)-9H-carbazole, DMF = N,N'-dimethylformamide) and {[Zn(bpdc)(Cz-3,6-bpy)]·2DMAc·H2O}n (1ß-DMAc, DMAc = N,N'-dimethylacetamide) as a couple of solvent-induced supramolecular isomers were hydro(solvo)thermally synthesized using DMF/H2O and DMAc-only as reaction media, respectively. Complexes 1α-DMF and 1ß-DMAc adopt very similar wavy sql sheet structures but present great differences in the 3-fold interweaving 2D → 2D nets, which result in free voids of 17.6 and 33.4%, respectively. Desolvated 1ß has about 2 times the free voids compared to that of desolvated 1α; however, the former displays a CO2 uptake of 87.9 cm3 g-1 STP at 195 K and P/P0 = 1 which is only slight larger than that (73.7 cm3 g-1 STP) of the latter under the same conditions. This is mainly interpreted by activation- and adsorption-induced framework distortion that caused partial transformation of crystal phase from 1ß to 1α and thus reduced free voids. The isosteric heat of CO2 adsorption (Qst) at zero loading is 29.8 kJ mol-1 for desolvated 1α and 30.6 kJ mol-1 for desolvated 1ß. On the other hand, results from XRPD, IR, and TGA measurements imply that 1α-DMF and 1ß-DMAc are highly stable in several different solvents, with the exception of 1α-DMF in DMAc, which experienced complete transformation to convert to 1ß-DMAc and 1ß-DMAc in acetone and methanol, which would respectively completely and partially transform to the crystal phase of 1α-DMF. Remarkably, 1α-DMF and 1ß-DMAc display intense blue and cyan fluorescence emissions, respectively, promising them to be multifunctional sensing platforms in sensitive detection of CrO42-, Cr2O72-, MnO4-, and Fe3+ with high selectivity and a fairly low limit of detection through perceptible fluorescence quenching effect. The possible sensing mechanisms were also investigated.

An Unprecedented Interpenetrating Structure Built from Two Differently Bonded Frameworks: Synthesis, Characteristics, and Efficient Removal of Anionic Dyes from Aqueous Solutions.

The first example of one single crystal (NTOU-5) containing two different organic-inorganic hybrid open-framework structures was obtained using a hydro(solvo)thermal method and structurally characterized by single-crystal X-ray diffraction. Remarkably, under the same synthetic conditions, the zinc ions are respectively coordinated by oxalic acid (OX) and 1,2,4,5-tetrakis(imidazol-1-ylmethyl)benzene (TIMB) linkers to form two significantly different frameworks: anionic [Zn2 (OX)3 ]2- and cationic [Zn(TIMB)]2+ networks that interweave with each other to give an unprecedented interpenetrating structure with two differently-bonded open-frameworks. From the inorganic chemistry perspective, it is extremely difficult to control to which metal center the oxygen-donor linkers or/and nitrogen-donor ligands bind. A mixed Co/Zn analogue was also obtained by a similar method. The single-crystal XRD and EDS analyses indicate that the octahedral Zn ions of the anionic framework are replaced by cobalt cations, whereas the Zn ions in the tetrahedral positions of the cationic networks remain intact. This leads to the formation of the interpenetrating analogue with a mixed metal composition. Furthermore, NTOU-5 shows structural stability and efficiently removes organic dyes from aqueous solutions at concentrations of 10 ppm.

Two-fold 2D + 2D → 2D interweaved rhombus (4,4) grid: synthesis, structure, and dye removal properties in darkness and in daylight.

Compound [Cu(NI-mbpy-44)2(NO3)2]·4H2O (1, NI-mbpy-44 = N-(pyridin-4-ylmethyl)-4-(pyridin-4-yl)-1,8-naphthalimide) adopting a two-dimensional (2D) periodical rhombus (4,4) grid has been synthesized. This grid doubly interweaves in a parallel fashion to result in overall 2D + 2D → 2D networks with approximately 14% sufficient free volumes in which lattice H2O molecules reside. Dye removal studies show that 1 selectively adsorbs anionic methyl orange (MO) and acid orange 7 (AO7) over cationic methylene blue (MB) and malachite green (MG) from aqueous solutions containing single or mixed dyes in darkness at room temperature. The experimental isotherm data were analyzed using linear Langmuir and Freundlich isotherm equations; the results indicated that the Langmuir model showed a better fit for the adsorption of MO and AO7 over 1, with high dark adsorption capacities of 810 and 370 mg g-1, respectively, although there could also be other associated mechanisms. The dark adsorption kinetics of MO and AO7 over 1 obeyed the pseudo-second-order kinetic model. Electrostatic attraction appears to be the dominating mechanism for adsorptive removal of MO and AO7 by 1, whereas π-π stacking (MO and AO7) and hydrogen-bonding interactions (AO7) could also be responsible. Exploration of the adsorption performance of MO and AO7, including studying the kinetics in daylight, shows similar results to those obtained in darkness, indicating the negligible influence of daylight on the dye removal. Nevertheless, 1 could liberate NI-mbpy-44 and Cu(ii) into water throughout the entire adsorption experiment, which could be a potential environmental hazard, this could cause secondary pollution and mean that 1 is impractical for use as an adsorbent candidate.

Fluorescent Cadmium Bipillared-Layer Open Frameworks: Synthesis, Structures, Sensing of Nitro Compounds, and Capture of Volatile Iodine.

Fluorescent Cd metal-organic frameworks (MOFs), [Cd2 (dicarboxylate)2 (NI-bpy-44)2 ] (dicarboxylate=benzene-1,4-dicarboxylate (1,4-bdc, 1), 2-bromobenzene-1,4-dicarboxylate (Br-1,4-bdc, 2), 2-nitrobenzene-1,4-dicarboxylate (NO2 -1,4-bdc, 3), biphenyl-4,4'-dicarboxylate (bpdc, 4); NI-bpy-44=N-(pyridin-4-yl)-4-(pyridin-4-yl)-1,8-naphthalimide)), featuring non- and twofold interpenetrating pcu-type bipillared-layer open structures with sufficient free voids of 58.4, 51.4, 51.5, and 41.4 %, respectively, have been hydro(solvo)thermally synthesized. MOFs 1-4 emitted solid-state blue or cyan fluorescence emissions at 447±7 nm, which mainly arose from NI-bpy-44 and are dependent on the incorporated solvents. After immersing the crystalline samples in different solvents, that is, H2 O and DMSO (1 and 2) as well as nitrobenzene and phenol (1-4), they exhibited a remarkable fluorescence quenching effect, whereas o-xylene and p-xylene (4) caused significant fluorescence enhancement. The sensing ability of MOFs 1-4 toward nitro compounds carried out in the vapor phase showed that nitrobenzene and 2-nitrophenol displayed detectable fluorescence quenching with 1, 2, and 4 whereas 4-nitrotoluene was an effective fluorescence quencher for 1 and 2; this is most likely attributed to their electron-deficient properties and higher vapor pressures. Moreover, MOFs 1-4 are highly reusable for quick capture of volatile iodine, as supported by clear crystal color change and also by immense fluorescence quenching responses owing to the donor-acceptor interaction. Low-pressure CO2 adsorption isotherms indicate that activated materials 1'-4' are inefficient at taking up CO2 .

Paddlewheel SBU based Zn MOFs: Syntheses, Structural Diversity, and CO2 Adsorption Properties.

Four Zn metal⁻organic frameworks (MOFs), {[Zn2(2,6-ndc)2(2-Pn)]·DMF}n (1), {[Zn2(cca)2(2-Pn)]·DMF}n (2), {[Zn2(thdc)2(2-Pn)]·3DMF}n (3), and {[Zn2(1,4-ndc)2(2-Pn)]·1.5DMF}n (4), were synthesized from zinc nitrate and N,N'-bis(pyridin-2-yl)benzene-1,4-diamine (2-Pn) with naphthalene-2,6-dicarboxylic acid (2,6-H2ndc), 4-carboxycinnamic acid (H2cca), 2,5-thiophenedicarboxylic acid (H2thdc), and naphthalene-1,4-dicarboxylic acid (1,4-H2ndc), respectively. MOFs 1⁻4 were all constructed from similar dinuclear paddlewheel {Zn2(COO)4} clusters and resulted in the formation of three kinds of uninodal 6-connected non-interpenetrated frameworks. MOFs 1 and 2 suit a topologic 48·67-net with 17.6% and 16.8% extra-framework voids, respectively, 3 adopts a pillared-layer open framework of 48·66·8-topology with sufficient free voids of 39.9%, and 4 features a pcu-type pillared-layer framework of 412·6³-topology with sufficient free voids of 30.9%. CO2 sorption studies exhibited typical reversible type I isotherms with CO2 uptakes of 55.1, 84.6, and 64.3 cm³ g-1 at 195 K and P/P0 =1 for the activated materials 1', 2', and 4', respectively. The coverage-dependent isosteric heat of CO2 adsorption (Qst) gave commonly decreased Qst traces with increasing CO2 uptake for all the three materials and showed an adsorption enthalpy of 32.5 kJ mol-1 for 1', 38.3 kJ mol-1 for 2', and 23.5 kJ mol-1 for 4' at zero coverage.

Anion-Directed Metallocages: A Study on the Tendency of Anion Templation.

Self-assembly of Cu(NO3 )2 ⋅3 H2 O and di(3-pyridylmethyl)amine (dpma) with addition of different acids (HNO3 , HOAc, HCl, HClO4 , HOTf, HPF6 , HBF4 , and H2 SO4 ) afforded a family of anion-templated tetragonal metallocages with a cationic prismatic structure of [(Gn- )⊂{Cu2 (Hdpma)4 }](8-n)+ (Gn- =NO3- , PF6- , SiF62- ) with different ligating anions/solvents (NO3- , Cl- , ClO4- , OTf- , H2 O) outside the cage. Systematic competitive experiments have rationalized the tendency of anion templation towards the formation of metallocages [(Gn- )⊂{Cu2 (Hdpma)4 }](8-n)+ as occurring in the order SiF62- ≈PF6- >NO3- >SO42- ≈ClO4- ≈BF4- . This sequence is mostly elucidated by shape control over size selectivity and electrostatic attraction between the cationic {Cu2 (Hdpma)4 }8+ host and the anionic guests. In addition, these results have also roughly ranked the anion coordination ability in the order Cl- , ClO4- , OTf- >NO3- >BF4- , CH3 SO4- . Magnetic studies of metallocages 1 t and 2-4 suggest that the fitted magnetic interaction, being weakly magnetically coupled overall, is interpreted as a result of the combination of intracage ferromagnetic coupling integrals and intercage antiferromagnetic exchange; both contributions are very weak and comparable in strength.

Synthesis, Structure, and Dye Adsorption Properties of a Nickel(II) Coordination Layer Built from d-Camphorate and Bispyridyl Ligands.

Reaction of NiCl2∙6H2O, d-camphoric acid (d-H2cam), and N,N'-bis(pyraz-2-yl)piperazine (bpzpip) in pure water at 150 °C afforded a novel nickel(II) coordination layer, [Ni4(d-cam)2(d-Hcam)4(bpzpip)4(H2O)2] (1), under hydro(solvo)thermal conditions. Single-crystal X-ray structure analysis reveals that 1 adopts a six-connected two-dimensional (2D) chiral layer structure with 36-hxl topology. Dye adsorption explorations indicate that 1 readily adsorbs methyl blue (MyB) from water without destruction of crystallinity. On the contrary, methyl orange (MO) is not adsorbed at all. The pseudo-second-order kinetic model could be used to interpret the adsorption kinetics for MyB. Equilibrium isotherm studies suggest complicated adsorption processes for MyB which do not have good applicability for either the two-parameter Langmuir or Freundlich isotherm model. The saturated adsorption capacity of 1 for MyB calculated by Langmuir is 185.5 mg·g-1 at room temperature.

Anion-Directed Copper(II) Metallocages, Coordination Chain, and Complex Double Salt: Structures, Magnetic Properties, EPR Spectra, and Density Functional Study.

A series of Cu(II) metallo-assemblies showing anion-directed structural variations, including five metallocages [(G(n-) )⊂{Cu2 (Hdpma)4 }]((8-n)+) (A(-) )8-n (G(n-) =NO3 (-) , ClO4 (-) , SiF6 (2-) , BF4 (-) , SO4 (2-) ; A(-) =NO3 (-) , ClO4 (-) , BF4 (-) , CH3 SO4 (-) ; Hdpma=bis(3-pyridylmethyl)ammonium cation), a complex double salt, namely, (H3 dpma)4 (CuCl4 )5 Cl2 , and a coordination chain, namely, [Cu2 (dpma)(OAc)4 ], are reported. The influence of the anion can be explained by its coordinating ability, the affinity of which for the Cu(II) center interferes significantly with metallocage formation, and its shape, which offers host-guest recognition ability to engage in weak metal-anion coordination and hydrogen bonding to the organic ligand, which are responsible for metallocage templation. EPR studies of these metallocages in the powder phase at room temperature and 77 K showed a trend of the g values (g|| >2.10>g⊥ >2.00) indicating a dx2-y2 -based ground state with square-pyramidal geometry for the Cu(II) centers. The magnetism of these metallocages can be interpreted as the result of a combination of relatively small magnetic coupling integrals and a substantial contribution of temperature-independent paramagnetism (TIP). The weak magnetic interaction is corroborated by the results of DFT calculations and the EPR spectra. Availability of the low-lying state for spin population was confirmed by a magnetization study, which revealed a magnetic moment approaching 2Nß, which would explain the presence of the larger TIP term.