Interference KRT17 reverses doxorubicin resistance in triple-negative breast cancer cells by Wnt/ß-catenin signaling pathway.

BACKGROUND: Triple-negative breast cancer (TNBC) is a subtype of breast cancer with the highest degree of malignancy and is easily resistant to drugs due to the lack of hormone receptors. Research on the resistance mechanisms in TNBC is particularly important. Keratin 17 (KRT17) is highly expressed in TNBC. Anthracycline doxorubicin (Dox) is a commonly used chemotherapeutic drug for early stage triple-negative breast cancer. OBJECTIVE: This study investigated the role of KRT17 in TNBC-Dox resistance. METHODS: Immuno-histochemical staining, qPCR, western blotting (WB), and immunofluorescence were used to detect the expression of KRT17 in TNBC-Dox-resistant patients and in TNBC-Dox-resistant MDA-MB-468 and MDA-MB-231. the effect of KRT17 on the proliferation and migration in KRT17 knockdown of TNBC-Dox-resistant cells was determined by the CCK8, clone formation, transwell invasion and wound healing assays were used to determine. RESULTS: KRT17 was highly expressed in the TNBC-Dox-resistant cells. Knockdown of KRT17 significantly reduced the IC50s of TNBC-Dox-resistant and parental strains and also reduced the proliferation and invasion abilities of TNBC-Dox-resistant cell lines. KRT17 regulated the Wnt/ß-catenin signaling pathway. The inhibitory effect of KRT17 knockdown on the proliferation and migration of TNBC-Dox-resistant cells was reversed by an activator of the Wnt signaling pathway. CONCLUSION: KRT17 can inhibit the Wnt/ß-catenin signaling pathway, thereby reducing the proliferation and invasion ability of TNBC-Dox-resistant cells.

Polyaminophosphoric Acid-Modified Ion-Imprinted Chitosan Aerogel with Enhanced Antimicrobial Activity for Selective La(III) Recovery and Oil/Water Separation.

In this study, polyaminophosphoric acid (PA)-functionalized ion-imprinted chitosan (CS) aerogel was fabricated for the first time, exhibiting good antibacterial property for selective La(III) recovery and oil/water separation. The as-prepared PA-CS-IIA-2 shows a remarkable adsorption capacity of 114.6 mg/g toward La(III) and high selectivity in the competitive adsorption systems, which is attributed to its abundant imprinting sites and surface functional groups. Benefiting from the amphiphilic property, the PA-CS-IIA-2 also exhibits an excellent adsorption performance for the extractant, oils, and organic solvents. Besides, the PA-CS-IIA-2 presents excellent regeneration and reusability characteristics. Moreover, compared with CS, the PA-CS-IIA-2 exhibits a significantly improved antibacterial activity originating from the PA component. Most importantly, the PA-CS-IIA-2 aerogel is capable of removing multiple pollutants all together and effectively inhibiting bacteria in the complex wastewater environments. Therefore, this study paves the way for developing high-performance rare-earth capture materials with multiple functions to meet diverse applications.

Transparent UHF RFID tags based on CVD-grown graphene films.

Ultra-high frequency (UHF) radio frequency identification (RFID) tags need to be attached or embedded to objects in various environments to achieve non-contact automatic identification. Graphene shows unique electrical and optical properties, which makes it become a promising material for radio frequency devices. In this paper, the transparent UHF RFID tags were fabricated based on graphene films with different number of stacked layers prepared by chemical vapor deposition (CVD). Through structural design, parameter optimization and experimental measurements, the reading distance of the transparent RFID tags was tested and compared. As the graphene film stacked layers increased, the reading distance of graphene-based RFID tags was farther. The UHF RFID tag based on the CVD-grown graphene with the light transmittance of 88% reached the maximum reading distance of 2.78 m in the frequency range of 860-960 MHz. In addition, the reading distance of graphene-based RFID tags at different bending angles and cycles was measured. The results reveal transparent graphene-based RFID tags have good flexibility and stability and can be used in flexible transparent devices.

[Analysis of pathogenic gene variant in two children with Treacher-Collins syndrome].

OBJECTIVE: To explore the clinical and genetic characteristics of two children with a clinical diagnosis of Treacher Collins syndrome (TCS). METHODS: Whole-exome sequencing was used to screen potential variants in the two children. Confirmation of suspected variants was performed through Sanger sequencing, multiplex ligation dependent probe amplification and real-time PCR in probands and their parents. RESULTS: A heterozygous deletion variant, c.4357_4360delGAAA, was detected in case one, while was de novo and verified by Sanger sequencing. The variant was classified as pathogenic (PVS1 +PM2+PM6) according to ACMG guideline. The heterozygous deletion of exon 1-7 was seen in the same gene in case 2, which MLPA verified as heterozygous deletion of exon 1-6. This deletion was inherited from the father with a normal phenotype, and the father's TCOF1 gene was suspected to be chimeric heterozygous deletion of exon 1-6 verified by MLPA. CONCLUSION: The identified variants in the TCOF1 gene probably underlie the two cases of TCS. There was no apparent correlation between genotype and phenotype. In addition, it shows a high interfamilial variability ranging from normal to full presentation of TCS. Genetic detection provided clinical diagnosis and genetic counselling for TCS patients.

Comprehensive analysis of competitive endogenous RNAs network: Identification and validation of prediction model composed of mRNA signature and miRNA signature in gastric cancer.

Gastric cancer (GC), one of the most lethal malignant tumors, is highly aggressive with a poor prognosis, while the molecular mechanisms underlying it remain largely unknown. Although advanced imaging techniques and comprehensive treatment facilitate the diagnosis and survival of some GC patients, the precise diagnosis and prognosis are still a challenge. The present study used publicly available gene expression profiles from The Cancer Genome Atlas and Gene Expression Omnibus datasets including mRNA, micro (mi)RNA and circular (circ)RNA of GC to establish a competing endogenous RNA network (ceRNA). Further, the present study performed least absolute shrinkage and selector operator regression analysis on the hub RNAs to establish a prediction model with mRNA and miRNA. The ceRNA network contained 109 edges and 56 nodes and the visible network contains 13 miRNAs, 9 circRNAs and 34 mRNAs. The five mRNA-based signature were CTF1, FKBP5, RNF128, GSTM2 and ADAMTS1. The area under curve (AUC) value of the diagnosis training cohort was 0.9975. The prognosis of the high-risk group (RiskScore >4.664) was worse compared with that of the low-risk group (RiskScore ≤4.664; P<0.05) in the training cohort. The five miRNA-based signature were miR-145-5p, miR-615-3p, miR-6507-5p, miR-937-3p and miR-99a-3p. The AUC value of the diagnosis training cohort was 0.9975. The prognosis of the high-risk group (RiskScore >1.621) was worse compared with that of the low-risk group (RiskScore ≤1.621; P<0.05) in the training cohort. The validation cohorts indicated that both five mRNA and five miRNA-based signatures had strong predictive power in diagnosis and prognosis for GC. In conclusion, a ceRNA network was established for GC and a five mRNA-based signature and a five miRNA-based signature was identified that enabled diagnosis and prognosis of GC by assigning patient to a high-risk group or low-risk group.

Integrated chemical profiling, network pharmacology and pharmacological evaluation to explore the potential mechanism of Xinbao pill against myocardial ischaemia-reperfusion injury.

CONTEXT: Xinbao pill (XBW), a traditional Chinese herbal formula, is widely used in clinical treatment for cardiovascular diseases; however, the therapeutic effect of XBW on myocardial ischaemia-reperfusion injury (MI/RI) is unclear. OBJECTIVE: This study evaluates the cardioprotective effect and molecular mechanism of XBW against MI/RI. MATERIALS AND METHODS: A phytochemistry-based network pharmacology analysis was used to uncover the mechanism of XBW against MI/RI. Ultra performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry method was used to identify chemicals. MI/RI-related targets of XBW were predicted using TargetNet database, OMIC database, etc. Sprague-Dawley (SD) rats under anterior descending artery ligation model were divided into Sham, MI/RI and XBW (180 mg/kg, intragastric administration). After 30 min ischaemia and 24 h reperfusion, heart tissues were collected for measurement of myocardial infarct size. After oxygen glucose deprivation for 6 h, H9c2 cells were treated with XBW (60, 240 and 720 µg/mL) and diazoxide (100 µM) for 18 h of reperfusion. RESULTS: Thirty-seven chemicals were identified in XBW; 50 MI/RI-related targets of XBW were predicted using indicated databases. XBW significantly reduced infarct size and creatine kinase MB (CK-MB) level after MI/RI; XBW protected H9c2 cells against OGD/R injury. Gene ontology (GO) and KEGG pathway enrichment analyses by String database showed that the cardioprotective effect of XBW was associated with autophagy and apoptosis signalling pathways. Experimental investigation also verified that XBW suppressed apoptosis, autophagy and endoplasmic reticulum (ER) stress. CONCLUSIONS: XBW showed therapeutic effects against MI/RI mainly via attenuating apoptosis though suppressing excessive autophagy and ER stress.

Treatment Effect of a Vascular-Disrupting Agent Dynamically Monitored by DWI: An Animal Experimental Study.

Objective: To investigate the treatment effect of a vascular-disrupting agent, M410, using diffusion-weighted imaging in a rabbit model of hepatic VX2 tumor. Methods: 28 New Zealand white rabbit models with VX2 liver tumors were established and were randomly divided into M410 (intravenous injection of M410 at a dose of 25 mg/kg every three days) and control (intravenous injection of saline every three days) groups. Conventional and diffusion-weighted imaging (DWI) were acquired on a 3.0 T MR unit at baseline, 4 h, d 1, d 4, d 7, and d 14 posttreatment. B-value with 700 (s/mm2) was chosen during DWI examinations. Tumor volume and apparent diffusion coefficient (ADC) values of the entire tumor and solid component of the tumor at every time point were measured. Two randomly chosen rabbits from each group were sacrificed for H&E staining and CD34 immunohistochemical assessments at each time point. An independent sample t-test was used to assess differences in tumor sizes and ADC values of the entire tumor and solid component of tumors between two groups, with P < 0.05 considered statistically significant. Result: There was no significant difference in tumor volume between the two groups at baseline, 4 h, and d 1. With time, the tumors in the control group grew significantly faster than those in the M410 group, and the average ADC values of the M410 group were lower than those of the control group at d 1 and higher than those of the control group at d 4; as such, there were statistical differences between the two groups at these two time points but not at the other four time points. The following pathological results reflected the underlying morphological changes and vascular alterations. Conclusions: M410 performed well in inhibiting the growth of the hepatic VX2 tumor which could be noninvasively monitored by DWI metrics.

Effect of TEAD4 on multilineage differentiation of muscle-derived stem cells.

TEAD4 is a member of transcriptional enhancer factor (TEF) family of transcription factors and plays a pivotal role in regulating embryonic development and muscle regeneration. Known previously, dysfunction of TEAD4 in mouse myoblasts impairs myotube development. However, the effects of TEAD4 on multipotency of muscle-derived stem cells (MDSCs) have not been clearly understood. Recently, bovine MDSCs (bMDSCs) were successfully isolated from adult bovine muscle. Our derived bMDSCs could differentiate into mesodermal cells, including myotubes, adipocytes, and osteoid cells. Our results also revealed that bMDSCs had the capacity to develop into ectodermal and endodermal lineages including neuron-like cells and insulin-secreting cells. After TEAD4 knock-down (TEAD4-KD), bMDSCs still kept the original capacity to differentiate into neuron-like cells and insulin-secreting cells, as shown by acquisition of both neuronal and pancreatic markers normally expressed in differentiated cells. However, up-regulation of CAV3 and ßMHC failed during myogenesis of bMDSCs with TEAD4-KD, although TEAD4-KD in bMDSCs did not affect osteoid cells and myotube formation. More interestingly, adipogenic differentiation of TEAD4-KD bMDSCs was significantly suppressed. During adipogenic differentiation, TEAD4-KD systematically impaired upregulation of TEAD1, TEAD2, and TEAD3, as well as the activation of C/EBP2, ADD1, and PPARγ as the key transcription factors for adipogenic differentiation. Finally, TEAD4-KD led to the failure of adipogenesis from bMDSCs. Together, our results support that TEAD4 is essential during adipogenic differentiation of bMDSCs. It has little effect on myogenesis of bMDSCs, and does not affect ostegenesis, neurogenesis, or pancreatic differentiation of bMDSCs. Our findings will be helpful for future study on the roles of the TEAD family during differentiation of MDSCs, and for controlling MDSC differentiation for stem cell applications.

Powder, paper and foam of few-layer graphene prepared in high yield by electrochemical intercalation exfoliation of expanded graphite.

A facile and high-yield approach to the preparation of few-layer graphene (FLG) by electrochemical intercalation exfoliation (EIE) of expanded graphite in sulfuric acid electrolyte is reported. Stage-1 H2SO4-graphite intercalation compound is used as a key intermediate in EIE to realize the efficient exfoliation. The yield of the FLG sheets (<7 layers) with large lateral sizes (tens of microns) is more than 75% relative to the total amount of starting expanded graphite. A low degree of oxygen functionalization existing in the prepared FLG flakes enables them to disperse effectively, which contributes to the film-forming characteristics of the FLG flakes. These electrochemically exfoliated FLG flakes are integrated into several kinds of macroscopic graphene structures. Flexible and freestanding graphene papers made of the FLG flakes retain excellent conductivity (≈24,500 S m(-1)). Three-dimensional (3D) graphene foams with light weight are fabricated from the FLG flakes by the use of Ni foams as self-sacrifice templates. Furthermore, 3D graphene/Ni foams without any binders, which are used as supercapacitor electrodes in aqueous electrolyte, provide the specific capacitance of 113.2 F g(-1) at a current density of 0.5 A g(-1), retaining 90% capacitance after 1000 cycles.

Synthesis of amphiphilic reduced graphene oxide with an enhanced charge injection capacity for electrical stimulation of neural cells.

Advanced neural research demands new electrode materials with high performance. Herein, we have developed a facile approach to synthesize amphiphilic reduced graphene oxide (rGO) and demonstrated its performance in electrically stimulating neural cells with high charge injection capacity. Synthesis of the amphiphilic rGO features covalent functionalization and simultaneous thermal reduction in a one-step manner. The covalent functionalization of methoxy poly(ethylene glycol) (mPEG) chains on the rGO surface not only provides a high dispersibility in various solvents, enabling convenient post-treatment processes, but also allows for an enhancement in double-layer charging capacitance. Calcium imaging of PC12 neural cells on the amphiphilic mPEG-rGO films has revealed a predominant increase in the percentage of cells with higher action potentials, derived from double-layer capacitance enhancement in charge injection. These results suggest that the new amphiphilic mPEG-rGO material is capable of providing a much safer and efficacious solution for neural prostheses applications.

High-density three-dimension graphene macroscopic objects for high-capacity removal of heavy metal ions.

The chemical vapor deposition (CVD) fabrication of high-density three-dimension graphene macroscopic objects (3D-GMOs) with a relatively low porosity has not yet been realized, although they are desirable for applications in which high mechanical and electrical properties are required. Here, we explore a method to rapidly prepare the high-density 3D-GMOs using nickel chloride hexahydrate (NiCl2·6H2O) as a catalyst precursor by CVD process at atmospheric pressure. Further, the free-standing 3D-GMOs are employed as electrolytic electrodes to remove various heavy metal ions. The robust 3D structure, high conductivity (~12 S/cm) and large specific surface area (~560 m²/g) enable ultra-high electrical adsorption capacities (Cd²âº ~ 434 mg/g, Pb²âº~ 882 mg/g, Ni²âº ~ 1,683 mg/g, Cu²âº ~ 3,820 mg/g) from aqueous solutions and fast desorption. The current work has significance in the studies of both the fabrication of high-density 3D-GMOs and the removal of heavy metal ions.

Interlayer catalytic exfoliation realizing scalable production of large-size pristine few-layer graphene.

Mass production of reduced graphene oxide and graphene nanoplatelets has recently been achieved. However, a great challenge still remains in realizing large-quantity and high-quality production of large-size thin few-layer graphene (FLG). Here, we create a novel route to solve the issue by employing one-time-only interlayer catalytic exfoliation (ICE) of salt-intercalated graphite. The typical FLG with a large lateral size of tens of microns and a thickness less than 2 nm have been obtained by a mild and durative ICE. The high-quality graphene layers preserve intact basal crystal planes owing to avoidance of the degradation reaction during both intercalation and ICE. Furthermore, we reveal that the high-quality FLG ensures a remarkable lithium-storage stability (>1,000 cycles) and a large reversible specific capacity (>600 mAh g(-1)). This simple and scalable technique acquiring high-quality FLG offers considerable potential for future realistic applications.

Reduced graphene oxide electrically contacted graphene sensor for highly sensitive nitric oxide detection.

We develop graphene-based devices fabricated by alternating current dielectrophoresis (ac-DEP) for highly sensitive nitric oxide (NO) gas detection. The novel device comprises the sensitive channels of palladium-decorated reduced graphene oxide (Pd-RGO) and the electrodes covered with chemical vapor deposition (CVD)-grown graphene. The highly sensitive, recoverable, and reliable detection of NO gas ranging from 2 to 420 ppb with response time of several hundred seconds has been achieved at room temperature. The facile and scalable route for high performance suggests a promising application of graphene devices toward the human exhaled NO and environmental pollutant detections.

Synthesis, characterization and electrochemical properties of stable osmabenzenes containing PPh3 substituents.

Treatment of [OsCl(2)(PPh(3))(3)] with HC[triple bond]CCH(OH)C[triple bond]CH/PPh(3) produces the osmabenzene [Os{CHC(PPh(3))CHC(PPh(3))CH}Cl(2)(PPh(3))(2)][OH] (2), which is air stable in both solution and solid state. The key intermediate of the one-pot reaction, [OsCl(2){CH=C(PPh(3))CH(OH)C[triple bond]CH}(PPh(3))(2)] (3), and the related complex [Os(NCS)(2){CHC(PPh(3))CH(OH)C[triple bond]CH}(PPh(3))(2)] (7) have been isolated and characterized, further supporting the proposed mechanisms for the reaction. Reactions of 3 with PPh(3), NaI, and NaSCN give osmabenzene 2, iodo-substituted osmabenzene [Os{CHC(PPh(3))CHCICH}I(2)(PPh(3))(2)] (4), and thiocyanato-substituted osmabenzene [Os{CHC(PPh(3))CHC(SCN)CH}(NCS)(2)(PPh(3))(2)] (5) respectively. Similarly, reaction of [OsBr(2)(PPh(3))(3)] with HC[triple bond]CCH(OH)C[triple bond] CH in THF produces [OsBr(2){CH=C(PPh(3))CH(OH)C[triple bond]CH}(PPh(3))(2)] (9), which reacts with PPh(3)/Bu(4)NBr to give osmabenzene [Os{CHC(PPh(3))CHC(PPh(3))CH}Br(2)(PPh(3))(2)]Br (10). Ligand substitution reactions of 2 produce a series of new stable osmabenzenes 11-17. An electrochemical study shows that osmabenzenes 2, 12, and 14-17 have interesting different electrochemical properties due to the different co-ligand. The oxidation potentials of complexes 2, 12, 16, and 17 with Cl, NCS, and N(CN)(2) ligands gradually positively shift in the sequence of Cl

Synthesis and characterization of a novel dialdehyde and cyclic anhydride.

The acid treatment of a ruthenabenzene yielded an unusual dialdehyde. Interestingly, this dialdehyde has notable anti-oxidative properties and resists even nitric acid. This stability is confirmed by chemical and electrochemical experiments. In addition, a stable cyclic anhydride is synthesized from the dialdehyde via an environmentally friendly electrochemical method.