Intrinsically stretchable organic photovoltaics by redistributing strain to PEDOT:PSS with enhanced stretchability and interfacial adhesion.

Intrinsically stretchable organic photovoltaics have emerged as a prominent candidate for the next-generation wearable power generators regarding their structural design flexibility, omnidirectional stretchability, and in-plane deformability. However, formulating strategies to fabricate intrinsically stretchable organic photovoltaics that exhibit mechanical robustness under both repetitive strain cycles and high tensile strains remains challenging. Herein, we demonstrate high-performance intrinsically stretchable organic photovoltaics with an initial power conversion efficiency of 14.2%, exceptional stretchability (80% of the initial power conversion efficiency maintained at 52% tensile strain), and cyclic mechanical durability (95% of the initial power conversion efficiency retained after 100 strain cycles at 10%). The stretchability is primarily realised by delocalising and redistributing the strain in the active layer to a highly stretchable PEDOT:PSS electrode developed with a straightforward incorporation of ION E, which simultaneously enhances the stretchability of PEDOT:PSS itself and meanwhile reinforces the interfacial adhesion with the polyurethane substrate. Both enhancements are pivotal factors ensuring the excellent mechanical durability of the PEDOT:PSS electrode, which further effectively delays the crack initiation and propagation in the top active layer, and enables the limited performance degradation under high tensile strains and repetitive strain cycles.

Senescence-targeted MicroRNA/Organoid composite hydrogel repair cartilage defect and prevention joint degeneration via improved chondrocyte homeostasis.

Introduction: Cartilage defect (CD) is a common complication in osteoarthritis (OA). Impairment of chondrogenesis and cellular senescence are considered as hallmarks of OA development and caused failure of cartilage repair in most clinical CD cases. Exploring markers for cellular senescence in CD patients might provide new perspectives for osteoarthritic CD patients. In the present study, we aim to explore senescent markers in CD patients with OA to fabricate a senescence-targeted SMSC organoid hydrogel for cartilage repair. Methods: Clinical cartilage samples from cartilage defect patients were collected. Immunofluorescence staining of senescent markers and SA-ß-Gal staining were used to detect the senescence state of SMSCs and chondrocytes in cartilage defect and OA patients. MicroRNA expression profiles of SMSC organoids and H2O2-treated SMSC organoids were analyzed and compared with high-throughput microRNA sequencing. Fluorescent in situ hybridization of miRNA were used to determine the expression level of miR-24 in SMSC organoids and cartilage samples. Interaction between miR-24 and its downstream target was analyzed via qRT-PCR, immunofluorescence and luciferase assay. Senescence-targeted miR-24 µS/SMSC organoid hydrogel (MSOH) was constructed for cartilage repair. Anti-senescence properties and chondrogenesis were determined in vitro for MSOH. Rats were used to evaluate the cartilage repair capacity of the MSOH hydrogel in vivo. Results: In this study, we found Osteoarthritic cartilage defect patients demonstrated upregulated cellular senescence in joint cartilage. MicroRNA sequencing demonstrated senescence marker miR-24 was negatively associated with cartilage impairment and cellular senescence in osteoarthritic CD patients. Moreover, miR-24 mimics alleviates cellular senescence to promote chondrogenesis by targeting downstream TAOK1. Also, miR-24 downregulated TAOK1 expression and promoted chondrogenesis in SMSC organoids. Senescence-targeted miR-24 µS/SMSC organoid hydrogel (MSOH) was constructed and demonstrated superior chondrogenesis in vitro. Animal experiments demonstrated that MSOH hydrogel showed better cartilage repairing effects and better maintained joint function at 24 weeks with low intra-articular inflammatory response after transplantation in rat joint. Single-cell RNA-seq of generated cartilage indicated that implanted MSOH could affect chondrocyte homeostatic state and alter the chondrocyte cluster frequency by regulating cellular glycolysis and OXPHOS, impacting cell cycle and ferroptosis to alleviate cellular senescence and prevent joint degeneration. Conclusion: Osteoarthritic cartilage defect patients demonstrated upregulated cellular senescence in joint cartilage. Senescence marker miR-24 was negatively associated with cartilage impairment in osteoarthritic CD patients. miR-24 attenuates chondrocytes senescence and promotes chondrogenesis in SMSC organoids through targeting TAOK1. Senescence-targeted miR-24 microsphere/SMSC organoid composite hydrogel could successfully repair cartilage defect in osteoarthritic microenvironment via enhanced miR-24/TAOK1 signaling pathway, suggesting MSOH might be a novel therapy for cartilage repair in osteoarthritic CD patients.

Omni-polarized Faraday isolator based on non-Hermitian Faraday system.

Non-Hermitian systems have recently attracted significant attention in photonics due to the realization that the interplay between gain and loss can lead to entirely new and unexpected features. Here, we propose and demonstrate a non-Hermitian Faraday system capable of non-reciprocal omni-polarizer action at the exceptional point. Notably, both forward and backward propagating light with arbitrary polarization converge to the same polarization state. Leveraging the robustness and non-reciprocity of the non-Hermitian Faraday system, we realize an omni-polarized Faraday isolator that can effectively isolate any polarized light without the need for a polarizer at the incident port of backward propagation. Remarkably, under the given parameter configuration, the isolator achieves a maximum isolation ratio of approximately 100 dB and a minimum isolation ratio of around 45 dB for various polarized light, accompanied by near-zero insertion loss. Furthermore, our research reveals the remarkable tolerance of the non-Hermitian Faraday isolator to nonlinear effects. This unique characteristic allows us to harness nonlinear effects to achieve various optical functions, all while maintaining excellent isolation performance. The proposed non-Hermitian Faraday system paves the way for the realization of magnetically or optically switchable non-reciprocal devices.

All-optical polarization scrambler based on polarization beam splitting with an amplified fiber ring.

Optical-fiber-based polarization scramblers can reduce the impact of polarization sensitive performance of various optical fiber systems. Here, we propose a simple and efficient polarization scrambler based on an all-optical Mach-Zehnder structure by combining a polarization beam splitter and an amplified fiber ring. To totally decoherence one polarization split beam, a fiber ring together with an amplifier is incorporated. The ratio of two orthogonal beams can be controlled by varying the amplification factor, and we observe different evolution trajectories of the output state of polarizations on the Poincaré sphere. When the amplification factor exceeds a certain threshold, the scrambler system exhibits nearly ideal polarization scrambling behavior. A commercial single wavelength laser with a linewidth of 3 MHz is utilized to characterize the scrambling performance. We found that when the sampling rate is 1.6 MSa/s, a scrambling speed up to 2000krad/s can be obtained for the average degree of polarization being less than 0.1. We also exploit these random polarization fluctuations to generate random binary numbers, indicating that the proposed technique is a good candidate for a random bit generator.

Tertiary lymphoid structures as a potential prognostic biomarker for combined hepatocellular-cholangiocarcinoma.

BACKGROUND: Combined hepatocellular-cholangiocarcinoma (cHCC-CCA), as a rare primary hepatic tumor, is challenging to accurately assess in terms of the clinical outcomes and prognostic risk factors in patients. This study aimed to clarify the function of tertiary lymphoid structure (TLS) status in predicting the outcome of cHCC-CCA and to preliminarily explore the possible mechanism of TLS formation. METHODS: The TLSs, with different spatial distributions and densities, of 137 cHCC-CCA were quantified, and their association with prognosis was assessed by Cox regression and Kaplan-Meier analyses. We further validated TLS possible efficacy in predicting immunotherapy responsiveness in two cHCC-CCA case reports. TLS composition and its relationship to CXCL12 expression were analysed by fluorescent multiplex immunohistochemistry. RESULTS: A high intratumoural TLS score was correlated with prolonged survival, whereas a high TLS density in adjacent tissue indicated a worse prognosis in cHCC-CCA. Mature TLSs were related to favorable outcomes and showed more CD8 + T cells infiltrating tumor tissues. We further divided the cHCC-CCA patients into four immune grades by combining the peri-TLS and intra-TLS, and these grades were an independent prognostic factor. In addition, our reported cases suggested a potential value of TLS in predicting immunotherapy response in cHCC-CCA patients. Our findings suggested that CXCL12 expression in cHCC-CCA tissue was significantly correlated with TLS presence. CONCLUSION: The spatial distribution and density of TLSs revealing the characteristics of the cHCC-CCA immune microenvironment, significantly correlated with prognosis and provided a potential immunotherapy response biomarker for cHCC-CCA.

Interfacial Mass Diagnostics: Quantitative Perspective on Construction and Mechanism Understanding of Dye-Sensitized, Perovskite and Quantum Dots Solar Cells.

Dye-sensitized solar cells (DSSCs), quantum dot-sensitized solar cells (QDSSCs) and perovskite solar cells (PSCs) have attracted wide attention. DSSCs, QDSSCs and PSCs can be prepared by liquid phase or solid phase, which causes a certain range of interface micro-mass changes during preparation. In addition, the photoelectric conversion process occurring inside the device also inevitably causes interface micro-mass changes. Interpretation of these interface micro-mass changes can help to optimize the cell structure, improve the stability and performance repeatability of the device, as well as directly or indirectly infer, track and predict the internal photoelectric conversion mechanism of the device. Quartz crystal microbalance (QCM) is a powerful tool for studying surface mass changes, extending this technology to the fields of solar cells to directly obtain interface micro mass changes, which makes the research more in-depth and opens up a new perspective for explaining the basic principles of solar cells. This review summarizes the research progress of QCM application in DSSCs, QDSSCs and PSCs in recent years, and explores the challenges and new opportunities of QCM application in new solar cells in the future.

CDKN2A inhibited ferroptosis through activating JAK2/STAT3 pathway to modulate cisplatin resistance in cervical squamous cell carcinoma.

Cervical squamous cell carcinoma (CESC) is a significant threat to women's health. Resistance to cisplatin (DDP), a common treatment, hinders the therapeutic efficacy. Understanding the molecular basis of DDP resistance in CESC is imperative. Cyclin-dependent kinase inhibitor 2A (CDKN2A) expression was evaluated through quantitative real-time-PCR and western blot in clinical samples from 30 CESC patients and human cervical epithelial cells and CESC cell lines (SiHa, C33A, and Caski). It was also evaluated through bioinformatics analysis in Timer, Ualcan, and GEPIA database. Cell viability was detected by CCK-8. Apoptosis was detected by Calcein AM/PI assay. Lipid reactive oxygen species (ROS), malondialdehyde, glutathione, Fe2+, and iron level were detected by kits. Protein level of JAK2, STAT3, p-JAK2, p-STAT3, ACSL4, GPX4, SLC7A11, and FTL were detected by western blot. In CESC, elevated CDKN2A expression was observed. Cisplatin exhibited a dual effect, inhibiting cell proliferation and inducing ferroptosis in CESC. CDKN2A knockdown in a cisplatin-resistant cell line suppressed proliferation and induced ferroptosis. Moreover, CDKN2A was identified as an inhibitor of erastin-induced ferroptosis. Additionally, targeting the JAK2/STAT3 pathway enhanced ferroptosis in cisplatin-resistant cells. CDKN2A could inhibit ferroptosis in CESC through activating JAK2/STAT3 pathway to modulate cisplatin resistance.

YOD1 protects against MRSA sepsis-induced DIC through Lys33-linked deubiquitination of NLRP3.

Disseminated intravascular coagulation (DIC) is considered to be the most common and lethal complication of sepsis. NLR-family pyrin domain-containing-3 (NLRP3) inflammasome plays an important role in host defense against microbial pathogens, and its deregulation may cause coagulation cascade and should be strictly managed. Here, we identified the deubiquitinase YOD1, which played a vital role in regulating coagulation in a NLRP3 inflammasome-dependent manner in sepsis induced by methicillin-resistant Staphylococcus aureus (MRSA). YOD1 interacted with NLRP3 to remove K33-linked ubiquitination of NLRP3 based on its deubiquitinating enzyme activity and specifically inhibited expression of NLRP3 as well as activation of NLRP3 inflammasome. Deficiency of YOD1 expression enhanced NLRP3 inflammasome activation and coagulation both in vitro and in vivo. In addition, pharmacological inhibition of the NLRP3 effectively improved coagulation and alleviated organ injury in Yod1-/- mice infected with MRSA. Thus, our study reported that YOD1 is a key regulator of coagulation during MRSA infection, and provided YOD1 as a potential therapeutic target for the treatment of NLRP3 inflammasome-related diseases, especially MRSA sepsis-induced DIC.

The efficacy and safety of EGFR-TKI in recurrent/metastatic nasopharyngeal carcinoma patients: A systematic review and meta-analysis.

Objectives: EGFR-tyrosine kinase inhibitor (TKI) is used to treat recurrent and metastatic nasopharyngeal carcinoma (rmNPC). This meta-analysis aims to study the efficacy and safety of EGFR-TKI in treating patients with rmNPC. Methods: We conducted a systematic search of PubMed, Embase, and Web of Science up to November 2023, and included literature that met the criteria. We extracted objective response rate (ORR), disease control rate (DCR), median progression-free survival (mPFS), median overall survival (mOS), and adverse reaction-related events and performed meta-analysis using Stata 14.0. Results: A total of nine articles were included. The summary results showed that the ORR for patients treated with EGFR-TKI for rmNPC was 38% (95% CI = 27%-49%), the DCR was 71% (95% CI = 61%-80%), the mPFS was 6.29 months (95% CI = 5.22-7.35), and the mOS was 15.94 months (95% CI = 14.68-17.20). The most common grade 3-4 adverse reaction events in these patients were mucositis, nasopharyngeal necrosis, and oral ulceration. We found an incidence rate of 49% (95% CI = 38%-61%) for grade 3-4 adverse events (AEs). The anti-PD1 combined with TKI treatment method is more effective than the EGFR-TKI alone for treating rmNPC. Conclusion: The study shows that EGFR-TKI has good efficacy in treating rmNPC but does not translate into survival benefits and owns a high incidence of grade 3-4 AEs. More RCT trials are needed in the future to verify the efficacy of anti-PD1 combined with TKI treatment method.

A nanonewton force sensor using a U-shape tapered microfiber interferometer.

Nanomechanical measurements, especially the detection of weak contact forces, play a vital role in many fields, such as material science, micromanipulation, and mechanobiology. However, it remains a challenging task to realize the measurement of ultraweak force levels as low as nanonewtons with a simple sensing configuration. In this work, an ultrasensitive all-fiber nanonewton force sensor structure based on a single-mode-tapered U-shape multimode-single-mode fiber probe is proposed and experimentally demonstrated with a limit of detection of ~5.4 nanonewtons. The use of the sensor is demonstrated by force measurement on a human hair sample to determine the spring constant of the hair. The results agree well with measurements using an atomic force microscope for the spring constant of the hair. Compared with other force sensors based on optical fiber in the literature, the proposed all-fiber force sensor provides a substantial advancement in the minimum detectable force possible, with the advantages of a simple configuration, ease of fabrication, and low cost.

KLF9 regulates osteogenic differentiation of mesenchymal stem cells.

Osteoporosis is a progressive skeletal disease which is characterized by reduced bone mass and degradation of bone microstructure. Mesenchymal stem cells (MSCs) have the potential to inhibit osteoporosis since they are multipotent stem cells that can differentiate into multiple types of cells including osteoblasts. Hence the mechanism of osteogenic differentiation of MSCs deserves comprehensive study. Here we report that KLF9 is a novel regulator in osteogenic differentiation of MSCs. We observed that depletion of KLF9 can largely compromise the osteogenic differentiation ability of MSCs. In addition, we revealed that inhibition of the PI3K-Akt pathway could also affect osteogenic differentiation since KLF9 depletion inhibits PI3K expression. Finally, we discovered that KLF9 expression can be induced by dexamethasone which is an essential component in osteogenic induction medium. Taken together, our study provides new insights into the regulatory role of KLF9 in osteogenic differentiation of MSCs.

External validation of predictive models for new vertebral fractures following percutaneous vertebroplasty.

OBJECTIVE: To investigate the external validation and scalability of four predictive models regarding new vertebral fractures following percutaneous vertebroplasty. METHODS: Utilizing retrospective data acquired from two centers, compute the area under the curve (AUC), calibration curve, and Kaplan-Meier plot to assess the model's discrimination and calibration. RESULTS: In the external validation of Zhong et al.'s 2015 predictive model for the probability of new fractures post-vertebroplasty, the AUC for re-fracture at 1, 2, and 3 years postoperatively was 0.570, 0.617, and 0.664, respectively. The AUC for Zhong et al.'s 2016 predictive model for the probability of new fractures in neighboring vertebrae was 0.738. Kaplan-Meier plot results for both models indicated a significantly lower incidence of re-fracture in low-risk patients compared to high-risk patients. Li et al.'s 2021 model had an AUC of 0.518, and its calibration curve suggested an overestimation of the probability of new fractures. Li et al.'s 2022 model had an AUC of 0.556, and its calibration curve suggested an underestimation of the probability of new fractures. CONCLUSION: The external validation of four models demonstrated that the predictive model proposed by Zhong et al. in 2016 exhibited superior external generalization capabilities.

Transient cavity-cavity strong coupling at terahertz frequency on LiNbO3 chips.

Terahertz (THz) microcavities have garnered considerable attention for their ability to localize and confine THz waves, allowing for strong coupling to remarkably enhance the light-matter interaction. These properties hold great promise for advancing THz science and technology, particularly for high-speed integrated THz chips where transient interaction between THz waves and matter is critical. However, experimental study of these transient time-domain processes requires high temporal and spatial resolution since these processes, such as THz strong coupling, occur in several picoseconds and microns. Thus, most literature studies rarely cover temporal and spatial processes at the same time. In this work, we thoroughly investigate the transient cavity-cavity strong-coupling phenomena at THz frequency and find a Rabi-like oscillation in the microcavities, manifested by direct observation of a periodic energy exchange process via a phase-contrast time-resolved imaging system. Our explanation, based on the Jaynes-Cummings model, provides theoretical insight into this transient strong-coupling process. This work provides an opportunity to deeply understand the transient strong-coupling process between THz microcavities, which sheds light on the potential of THz microcavities for high-speed THz sensor and THz chip design.

4-Fluorobenzyl cyanide, a sterically-hindered solvent expediting interfacial kinetics in lithium-ion batteries.

The electrochemical performance of lithium-ion batteries (LIBs) is plagued by sluggish interfacial kinetics. Fortunately, the Li+ solvation structure bridges the bulk electrolyte and interfacial chemistry, providing a pathway for promoting electrochemical kinetics in LIBs. Herein, we improve the interfacial kinetics by tuning the Li+ coordination chemistry based on solvent molecular engineering. Specifically, 4-fluorobenzyl cyanide (FBCN), featuring steric hindrance and a weak Lewis basic center, is designed to construct a bulky coordination structure with Li+, weakening ion-dipole interaction (Li+-solvents) but promoting coulombic attraction (Li+-anions) at a normal Li salt concentration. This sterically-controlled solvation chemistry reduces the interfacial barrier and thus contributes to improved rate performance, as demonstrated practically in LiFePO4//graphite pouch cells. This study provides fresh insights into solvent steric control and coordination chemistry engineering, opening a new avenue for enhancing electrochemical kinetics in LIBs.

Single-cell insights: pioneering an integrated atlas of chromatin accessibility and transcriptomic landscapes in diabetic cardiomyopathy.

BACKGROUND: Diabetic cardiomyopathy (DCM) poses a growing health threat, elevating heart failure risk in diabetic individuals. Understanding DCM is crucial, with fibroblasts and endothelial cells playing pivotal roles in driving myocardial fibrosis and contributing to cardiac dysfunction. Advances in Multimodal single-cell profiling, such as scRNA-seq and scATAC-seq, provide deeper insights into DCM's unique cell states and molecular landscape for targeted therapeutic interventions. METHODS: Single-cell RNA and ATAC data from 10x Multiome libraries were processed using Cell Ranger ARC v2.0.1. Gene expression and ATAC data underwent Seurat and Signac filtration. Differential gene expression and accessible chromatin regions were identified. Transcription factor activity was estimated with chromVAR, and Cis-coaccessibility networks were calculated using Cicero. Coaccessibility connections were compared to the GeneHancer database. Gene Ontology analysis, biological process scoring, cell-cell communication analysis, and gene-motif correlation was performed to reveal intricate molecular changes. Immunofluorescent staining utilized various antibodies on paraffin-embedded tissues to verify the findings. RESULTS: This study integrated scRNA-seq and scATAC-seq data obtained from hearts of WT and DCM mice, elucidating molecular changes at the single-cell level throughout the diabetic cardiomyopathy progression. Robust and accurate clustering analysis of the integrated data revealed altered cell proportions, showcasing decreased endothelial cells and macrophages, coupled with increased fibroblasts and myocardial cells in the DCM group, indicating enhanced fibrosis and endothelial damage. Chromatin accessibility analysis unveiled unique patterns in cell types, with heightened transcriptional activity in myocardial cells. Subpopulation analysis highlighted distinct changes in cardiomyocytes and fibroblasts, emphasizing pathways related to fatty acid metabolism and cardiac contraction. Fibroblast-centered communication analysis identified interactions with endothelial cells, implicating VEGF receptors. Endothelial cell subpopulations exhibited altered gene expressions, emphasizing contraction and growth-related pathways. Candidate regulators, including Tcf21, Arnt, Stat5a, and Stat5b, were identified, suggesting their pivotal roles in DCM development. Immunofluorescence staining validated marker genes of cell subpopulations, confirming PDK4, PPARγ and Tpm1 as markers for metabolic pattern-altered cardiomyocytes, activated fibroblasts and endothelial cells with compromised proliferation. CONCLUSION: Our integrated scRNA-seq and scATAC-seq analysis unveils intricate cell states and molecular alterations in diabetic cardiomyopathy. Identified cell type-specific changes, transcription factors, and marker genes offer valuable insights. The study sheds light on potential therapeutic targets for DCM.

Cloning of CAT genes in Satsuma mandarin and their expression characteristics in response to environmental stress and arbuscular mycorrhizal fungi.

KEY MESSAGE: CitCAT1 and CitCAT2 were cloned and highly expressed in mature leaves. High temperatures up-regulated CitCAT1 expression, while low temperatures and Diversispora versiformis up-regulated CitCAT2 expression, maintaining a low oxidative damage. Catalase (CAT), a tetrameric heme-containing enzyme, removes hydrogen peroxide (H2O2) to maintain low oxidative damage in plants exposed to environmental stress. This study aimed to clone CAT genes from Citrus sinensis cv. "Oita 4" and analyze their expression patterns in response to environmental stress, exogenous abscisic acid (ABA), and arbuscular mycorrhizal fungal inoculation. Two CAT genes, CitCAT1 (NCBI accession: PP067858) and CitCAT2 (NCBI accession: PP061394) were cloned, and the open reading frames of their proteins were 1479 bp and 1539 bp, respectively, each encoding 492 and 512 amino acids predicted to be localized in the peroxisome, with CitCAT1 being a stable hydrophilic protein and CitCAT2 being an unstable hydrophilic protein. The similarity of their amino acid sequences reached 83.24%, and the two genes were distantly related. Both genes were expressed in stems, leaves, flowers, and fruits, accompanied by the highest expression in mature leaves. In addition, CitCAT1 expression was mainly up-regulated by high temperatures (37 °C), exogenous ABA, and PEG stress within a short period of time, whereas CitCAT2 expression was up-regulated by exogenous ABA and low-temperature (4 °C) stress. Low temperatures (0 °C) for 12 h just up-regulated CitCAT2 expression in Diversispora versiformis-inoculated plants, and D. versiformis inoculation up-regulated CitCAT2 expression, along with lower hydrogen peroxide and malondialdehyde levels in mycorrhizal plants at low temperatures. It is concluded that CitCAT2 has an important role in resistance to low temperatures as well as mycorrhizal enhancement of host resistance to low temperatures.

Exploiting the potential of a novel "in-situ latent heat recovery" in hollow-fiber vacuum membrane distillation process for simultaneously improved water production and energy efficiency.

Thermal driven membrane distillation (MD) technology is a promising method for purifying & recovering various salty (especially high salty) or contaminated wastewaters with low-grade heat sources. However, the drawbacks of "high energy consumption" and "high cooling water consumption" pose special challenges for the future development of this technology. In this article, we report an innovative strategy called "in-situ heat transfer", which is based on the jacketed structure composed of hollow fiber membranes and capillary heat exchange tubes, to simplify the migration steps of condensation latent heat in MD heat recovery process. The results indicate that the novel heat recovery strategy exhibits higher growth rates both in the flux and gained output ratio (47.4 % and 173.1 %, respectively), and further reduces the system's dependence on cooling water. In sum, under the control of the "in-situ heat transfer" mechanism, the functional coupling of "vapor condensation (exothermic)" and "feed evaporation (endothermic)" in limited-domain space is an attractive alternative solution, because it eliminates the disadvantages of the imbalance between heat supply and demand in traditional heat recovery methods. Our research may facilitate the development of MD heat recovery modules for industrial applications, which will help to further achieve the goal of energy saving and emission reduction.

Exploring the biological roles of DHX36, a DNA/RNA G-quadruplex helicase, highlights functions in male infertility: A comprehensive review.

It is estimated that 15 % of couples at reproductive age worldwide suffer from infertility, approximately 50 % of cases are caused by male factors. Significant progress has been made in the diagnosis and treatment of male infertility through assisted reproductive technology and molecular genetics methods. However, there is still inadequate research on the underlying mechanisms of gene regulation in the process of spermatogenesis. Guanine-quadruplexes (G4s) are a class of non-canonical secondary structures of nucleic acid commonly found in genomes and RNAs that play important roles in various biological processes. Interestingly, the DEAH-box helicase 36 (DHX36) displays high specificity for the G4s which can unwind both DNA G4s and RNA G4s enzymatically and is highly expressed in testis, thereby regulating multiple cellular functions including transcription, pre-mRNA splicing, translation, telomere maintenance, genomic stability, and RNA metabolism in development and male infertility. This review provides an overview of the roles of G4s and DHX36 in reproduction and development. We mainly focus on the potential role of DHX36 in male infertility. We also discuss possible future research directions regarding the mechanism of spermatogenesis mediated by DHX36 through G4s in spermatogenesis-related genes and provide new targets for gene therapy of male infertility.

Inherited KDM6AA649T facilitates tumor-immune escape and exacerbates colorectal signet-ring cell carcinoma outcomes.

Childhood onset of colorectal signet-ring cell carcinoma (CR-SRCC) is extremely rare and featured as highly malignant with poor prognosis. Here we reported a CR-SRCC case of 11-year-old boy with a novel inherited X-linked KDM6AA694T mutation. The H3K27me3 demethylase KDM6A was frequently mutated in varieties of tumors and acts as a tumor suppressor. In vivo H3K27me3 demethylation assay demonstrated that KDM6AA694T had dampened H3K27me3 demethylase activity. Overexpression of KDM6AA694T in SRCC cell line KATO3 promoted cell proliferation, invasion and migration, which were further confirmed in vivo by constructing orthotopic tumor growth and lung metastasis model. Besides, expression of KDM6AA694T in immune cells suppresses inflammatory macrophage response and effector T cell response. In conclusion, we characterized a novel inherited KDM6AA694T mutant from a childhood-onset SRCC case and demonstrated that the mutant with impaired H3K27me3 demethylase activity could potentiate tumor malignancy and suppress antitumor immunity.

Study on the Effect of Electrolytes on Processing Efficiency and Accuracy of Titanium Alloy Utilizing Laser and Shaped Tube Electrochemical Machining.

Electrochemical machining (ECM) has become more prevalent in titanium alloy processing. However, the presence of the passivation layer on the titanium alloys significantly impacts the performance of ECM. In an attempt to overcome the passivation effects, a high-temperature electrolyte or the addition of halogen ions to the electrolyte has been used. Still, it often results in compromised machining accuracy and surface roughness. This study applied laser and shaped tube electrolytic machining (Laser-STEM) for titanium alloy drilling, where the laser was guided to the machining zone via total internal reflection. The performance of Laser-STEM using different types of electrolytes was compared. Further, the effects of laser power and pulse voltage on the machining side gap, material removal rate (MRR), and surface roughness were experimentally studied while drilling small holes in titanium alloy. The results indicated that the use of passivating electrolytes improved the machining precision, while the MRR decreased with an increase in laser power during Laser-STEM. The MRR showed an increase while using aggressive electrolytes; however, at the same time, the machining precision deteriorated with the increase in laser power. Particularly, the maximum feeding rate of 6.0 mm/min for the tool electrode was achieved using NaCl solution as the electrolyte during Laser-STEM, marking a 100% increase compared to the rate without the use of a laser. Moreover, the model and equivalent circuits were also established to illustrate the material removal mechanisms of Laser-STEM in different electrolytes. Lastly, the processing of deep small holes with a diameter of 1.5 mm, a depth of 38 mm, and a surface roughness of Ra 2 µm was achieved via Laser-STEM without the presence of a recast layer and heat-affected zones. In addition, the cross-inner flow channels in the titanium alloys were effectively processed.