ABSTRACT
Developing cost-efficient bifunctional water splitting catalysts is crucial for sustainable hydrogen energy applications. Herein, ruthenium (Ru)-incorporated and phosphorus (P)-doped nickel molybdate (Ru-NiMoO(P)4 ) nanosheet array catalysts are synthesized. Due to the synergy of Ru clusters and NiMoO(P)4 by the modulated electronic structure and the rich active sites, impressively, Ru-NiMoO(P)4 exhibits superior OER (194 mV @ 50 mA cm-2 ) and HER (24 mV @ 10 mA cm-2 ) activity in alkaline media, far exceeding that of commercial Pt/C and RuO2 catalysts. Meanwhile, as bifunctional catalyst, to drive the overall water splitting at the current density of 10 mA cm-2 , Ru-NiMoO(P)4 requires only 1.45 V and maintaining stable output for 100 h. Furthermore, Ru-NiMoO(P)4 also possesses excellent capability for seawater electrolysis hydrogen production. Moreover, the successful demonstration of wind and solar hydrogen production systems provide the feasibility of the ultra-low Ru loading catalyst for large-scale hydrogen production in the future.
ABSTRACT
To commercialize hydrogen production by proton exchange membrane (PEM) electrolysis, the amount of rare and precious metal (iridium) required for anodic oxygen evolution reaction (OER) must be greatly reduced. In order to solve the problem, carrier loading is used to reduce the amount of iridium. Unlike the carrier modified by conventional metal element doping, this work doped the carrier with the nonmetallic element and then prepared IrO2/TiBxO2 composite catalyst using the Adams melting method. B-doped TiO2 supports with different doping amounts show the main phase rutile structure. Among them, the conductivity of B-doped carrier shows an increasing trend with the increase of doping amount, because boron can form holes and negative centers after doping, and more carriers improve the conductivity of the support. In addition, since element B is manifested from inside to outside on the support, B can affect the catalytic process. After the manifestation of element B, the carrier loaded with IrO2 exhibited superior electrocatalytic properties. The voltammetric charge per unit mass of 40IrO2/TiB0.3O2#2 (where #2 represents B after manifestation) reaches 1970 mC (cm2 mg)-1, the corresponding overpotential is 273 mV at a current density of 10 mA/cm-2, and the Tafel slope is 61.9 mV/dec Also, the charge transfer resistance is only 15 Ω. Finally, in the stability test, the composite catalyst is also better than pure IrO2 in the 20â¯000 s operation. Therefore, element B has an unexpectedly positive effect on the catalytic progress on the surface of the support after its manifestation.
